The latest development on amine functionalized solid adsorbents for post-combustion CO2 capture: Analysis review

doi:10.1016/j.cjche.2020.11.028

中国化学工程学报 ›› 2021, Vol. 35 ›› Issue (7): 17-43.DOI: 10.1016/j.cjche.2020.11.028

The latest development on amine functionalized solid adsorbents for post-combustion CO₂ capture: Analysis review

Peiyu Zhao^1,2, Guojie Zhang², Huangyu Yan², Yuqiong Zhao²

1. Heze Branch, Qilu University of Technology (Shandong Academy of Sciences), Biological Engineering Technology Innovation Center of Shandong Province, Heze 274000, China;
2. Key Laboratory of Coal Science and Technology, Ministry of Education and Shanxi Province, Taiyuan University of Technology, Taiyuan 030024, China

收稿日期:2020-06-07 修回日期:2020-10-06 出版日期:2021-07-28 发布日期:2021-09-30
通讯作者: Guojie Zhang
基金资助:
This work was supported by the National Natural Science Foundation of China (21878200 and 21676174), International S&T Cooperation Program of Shanxi province (201703D421038), Shanxi Scholarship Council of China (2017-036), and Joint Fund of Shanxi Provincial Coal Seam Gas (2015012019).

The latest development on amine functionalized solid adsorbents for post-combustion CO₂ capture: Analysis review

Peiyu Zhao^1,2, Guojie Zhang², Huangyu Yan², Yuqiong Zhao²

1. Heze Branch, Qilu University of Technology (Shandong Academy of Sciences), Biological Engineering Technology Innovation Center of Shandong Province, Heze 274000, China;
2. Key Laboratory of Coal Science and Technology, Ministry of Education and Shanxi Province, Taiyuan University of Technology, Taiyuan 030024, China

Received:2020-06-07 Revised:2020-10-06 Online:2021-07-28 Published:2021-09-30
Contact: Guojie Zhang
Supported by:
This work was supported by the National Natural Science Foundation of China (21878200 and 21676174), International S&T Cooperation Program of Shanxi province (201703D421038), Shanxi Scholarship Council of China (2017-036), and Joint Fund of Shanxi Provincial Coal Seam Gas (2015012019).

摘要/Abstract

摘要： Global warming and associated global climate change have led to serious efforts towards reducing CO₂ emissions through the CO₂ capture from the major emission sources. CO₂ capture using the amine functionalized adsorbents is regard as a direct and effective way to reducing CO₂ emissions due to their large CO₂ adsorption amount, excellent CO₂ adsorption selectivity and lower energy requirements for adsorbent regeneration. Moreover, large number of achievements on the amine functionalized solid adsorbent have been recorded for the enhanced CO₂ capture in the past few years. In view of this, we review and analyze the recent advances in amine functionalized solid adsorbents prepared with different supporting materials including mesoporous silica, zeolite, porous carbon materials, metal organic frameworks(MOF) and other composite porous materials. In addition, amine functionalized solid adsorbents derived from waste resources are also reviewed because of the large number demand for cost-effective carbon dioxide adsorbents and the processing needs of waste resources. Considering the importance of the stability of the adsorbent in practical applications, advanced research in the capture cycle stability has also been summarized and analyzed. Finally, we summarize the review and offer the recommendations for the development of amine-based solid adsorbents for carbon dioxide capture.

关键词: Solid adsorbents, Amine functionalized, CO₂ capture, Adsorption, Review

Abstract: Global warming and associated global climate change have led to serious efforts towards reducing CO₂ emissions through the CO₂ capture from the major emission sources. CO₂ capture using the amine functionalized adsorbents is regard as a direct and effective way to reducing CO₂ emissions due to their large CO₂ adsorption amount, excellent CO₂ adsorption selectivity and lower energy requirements for adsorbent regeneration. Moreover, large number of achievements on the amine functionalized solid adsorbent have been recorded for the enhanced CO₂ capture in the past few years. In view of this, we review and analyze the recent advances in amine functionalized solid adsorbents prepared with different supporting materials including mesoporous silica, zeolite, porous carbon materials, metal organic frameworks(MOF) and other composite porous materials. In addition, amine functionalized solid adsorbents derived from waste resources are also reviewed because of the large number demand for cost-effective carbon dioxide adsorbents and the processing needs of waste resources. Considering the importance of the stability of the adsorbent in practical applications, advanced research in the capture cycle stability has also been summarized and analyzed. Finally, we summarize the review and offer the recommendations for the development of amine-based solid adsorbents for carbon dioxide capture.

Key words: Solid adsorbents, Amine functionalized, CO₂ capture, Adsorption, Review

Peiyu Zhao, Guojie Zhang, Huangyu Yan, Yuqiong Zhao. The latest development on amine functionalized solid adsorbents for post-combustion CO₂ capture: Analysis review[J]. 中国化学工程学报, 2021, 35(7): 17-43.

Peiyu Zhao, Guojie Zhang, Huangyu Yan, Yuqiong Zhao. The latest development on amine functionalized solid adsorbents for post-combustion CO₂ capture: Analysis review[J]. Chinese Journal of Chemical Engineering, 2021, 35(7): 17-43.

参考文献

[1] N. Nityashree, G.V. Manohara, M.M. Maroto-Valer, S. Garcia, Advanced hightemperature CO₂ sorbents with improved long-term cycling stability, ACS Appl. Mater. Interfaces 12(2020) 33765-33774.
[2] C. Song, Q. Liu, N. Ji, S. Deng, J. Zhao, Y. Li, Y. Song, H. Li, Alternative pathways for efficient CO₂ capture by hybrid processes-A review, Renew. Sust. Energ. Rev. 82(2018) 215-231.
[3] A. Dey, S.K. Dash, B. Mandal, Elucidating the performance of (N-(3-aminopropyl)-1,3-propanediamine) activated (1-dimethylamino-2-propanol) as a novel amine formulation for post combustion carbon dioxide capture, Fuel 277(2020) 118209-118220.
[4] Q. Liu, Y. Shi, W. Zhong, A. Yu, Co-firing of coal and biomass in oxy-fuel fluidized bed for CO₂ capture:A review of recent advances, Chinese J. Chem. Eng. 27(2019) 2261-2272.
[5] C. Rosu, S.H. Pang, A.R. Sujan, M.A. Sakwa-Novak, E.W. Ping, C.W. Jones, Effect of extended aging and oxidation on linear poly(propylenimine)-mesoporous silica composites for CO₂ capture from simulated air and flue gas streams, ACS Appl. Mater. Interfaces 12(2020) 38085-38097.
[6] Y. Yuan, H. You, L. Ricardez-Sandoval, Recent advances on first-principles modeling for the design of materials in CO₂ capture technologies, Chinese J. Chem. Eng. 27(2019) 1554-1565.
[7] A. Hemmati, H. Rashidi, Mass transfer investigation and operational sensitivity analysis of aminebased industrial CO₂ capture plant, Chinese J. Chem. Eng. 27(2019) 534-543.
[8] N.A. Rashidi, S. Yusup, An overview of activated carbons utilization for the post-combustion carbon dioxide capture, J. CO₂ Util. 13(2016) 1-16.
[9] B.P. Spigarelli, S. Komar Kawatra, Opportunities and challenges in carbon dioxide capture, J. CO₂ Util. 1(2013) 69-87.
[10] H. Yu, Recent developments in aqueous ammonia-based post-combustion CO₂ capture technologies, Chinese J. Chem. Eng. 26(2018) 2255-2265.
[11] L. Ghalib, A. Abdulkareem, B.S. Ali, S. Mazari, Modeling the rate of corrosion of carbon steel using activated diethanolamine solutions for CO₂ absorption, Chinese J. Chem. Eng. 28(2020) 2099-2110.
[12] Z.L. Ooi, P.Y. Tan, L.S. Tan, S. Yeap, Amine-based solvent for CO₂ absorption and its impact on carbon steel corrosion:A perspective review, Chinese J. Chem. Eng. 28(2020) 1357-1367.
[13] F. Lou, A. Zhang, G. Zhang, L. Ren, X. Guo, C. Song, Enhanced kinetics for CO₂ sorption in amine-functionalized mesoporous silica nanosphere with inverted cone-shaped pore structure, Appl. Energy 264(2020) 114637-114648.
[14] D. Zabiegaj, M. Caccia, M.E. Casco, F. Ravera, J. Narciso, Synthesis of carbon monoliths with a tailored hierarchical pore structure for selective CO₂ capture, J. CO₂ Util. 26(2018) 36-44.
[15] C. Chen, S. Zhang, K.H. Row, W.S. Ahn, Amine-silica composites for CO₂ capture:A short review, J. Energy Chem. 26(2017) 868-880.
[16] L. Nie, Y. Mu, J. Jin, J. Chen, J. Mi, Recent developments and consideration issues in solid adsorbents for CO₂ capture from flue gas, Chinese J. Chem. Eng. 26(2018) 2303-2317.
[17] C. Chen, S. Bhattacharjee, Trimodal nanoporous silica as a support for aminebased CO₂ adsorbents:Improvement in adsorption capacity and kinetics, Appl. Surf. Sci. 396(2017) 1515-1519.
[18] J. Jiao, J. Cao, Y. Xia, L. Zhao, Improvement of adsorbent materials for CO₂ capture by amine functionalized mesoporous silica with worm-hole framework structure, Chem. Eng. J. 306(2016) 9-16.
[19] X. Guo, L. Ding, K. Kanamori, K. Nakanishi, H. Yang, Functionalization of hierarchically porous silica monoliths with polyethyleneimine (PEI) for CO₂ adsorption, Micropor. Mesopor. Mater. 245(2017) 51-57.
[20] J. Wang, M. Wang, B. Zhao, W. Qiao, D. Long, L. Ling, Mesoporous carbonsupported solid amine sorbents for low-temperature carbon dioxide capture, Ind. Eng. Chem. Res. 52(2013) 5473-15444.
[21] S.H. Chai, Z.M. Liu, K.H.S. Tan, S. Dai, Amine functionalization of microsized and nanosized mesoporous carbons for carbon dioxide capture, Ind. Eng. Chem. Res. 55(2016) 7355-7361.
[22] X. Wang, D. Wang, M. Song, C. Xin, W. Zen, Tetraethylenepentamine-modified activated semicoke for CO₂ capture from flue gas, Energy Fuels 31(2017) 3055-3061.
[23] J. Yu, L.H. Xie, J.R. Li, Y. Ma, J.M. Seminario, P.B. Balbuena, CO₂ capture and separations using MOFs:computational and experimental studies, Chem. Rev. 117(2017) 9674-9754.
[24] X. Huang, J. Lu, W. Wang, X. Wei, J. Ding, Experimental and computational investigation of CO₂ capture on amine grafted metal-organic framework NH₂-MIL-101, Appl. Surf. Sci. 371(2016) 307-313.
[25] J. Ge, L. Liu, L. Qiu, X. Jiang, Y. Shen, Facile synthesis of amine-functionalized MIL-53(Al) by ultrasound microwave method and application for CO₂ capture, J. Porous Mater. 23(2016) 857-865.
[26] J. Cheng, N. Liu, L. Hu, Y. Li, Y. Wang, J. Zhou, Polyethyleneimine entwine thermally-treated Zn/Co zeolitic imidazolate frameworks to enhance CO₂ adsorption, Chem. Eng. J. 364(2019) 530-540.
[27] X. Liu, F. Gao, J. Xu, L. Zhou, H. Liu, J. Hu, Zeolite@Mesoporous silicasupported-amine hybrids for the capture of CO₂ in the presence of water, Micropor. Mesopor. Mater. 222(2016) 113-119.
[28] H. Zhang, A. Goeppert, G.A. Olah, G.K. Surya Prakash, Remarkable effect of moisture on the CO₂ adsorption of nano-silica supported linear and branched polyethylenimine, J. CO₂ Util. 19(2017) 91-99.
[29] Y. Kong, X. Shen, S. Cui, Amine hybrid zirconia/silica composite aerogel for low-concentration CO₂ capture, Micropor. Mesopor. Mater. 236(2016) 269-276.
[30] B. Dutcher, M. Fan, A.G. Russe, Amine-based CO₂ capture technology development from the beginning of 2013-A review, ACS Appl. Mater. Interfaces 7(2015) 2137-2148.
[31] Y. Han, G. Hwang, H. Kima, B.Z. Haznedaroglu, B. Lee, Amine-impregnated millimeter-sized spherical silica foams with hierarchical mesoporous-macroporous structure for CO₂ capture, Chem. Eng. J. 259(2015) 653-662.
[32] S. Gadipelli, H.A. Patel, Z. Guo, An ultrahigh pore volume drives up the amine stability and cyclic CO₂ capacity of a solid-amine@carbon sorbent, Adv. Mater. 27(2015) 4903-4909.
[33] H. Thakkar, S. Eastman, A. Hajari, A.A. Rownaghi, J.C. Knox, F. Rezae, 3Dprinted zeolite monoliths for CO₂ removal from enclosed environments, ACS Appl. Mater. Interfaces 8(2016) 27753-27761.
[34] H. Thakkar, S. Eastman, A.A. Mamoori, A. Hajari, A.A. Rownaghi, F. Rezaei, Formulation of aminosilica adsorbents into 3D-printed monoliths and evaluation of their CO₂ capture performance, ACS Appl. Mater. Interfaces 9(8) (2017) 7489-7498.
[35] W. Wang, J. Motuzas, X.S. Zhao, J.C. Diniz da Costa, Improved CO₂ sorption in freeze-dried amine functionalized mesoporous silica sorbent, Ind. Eng. Chem. Res. 57(2018) 5653-5660.
[36] S. Park, K. Choi, H. Yu, Y. Won, C. Kim, M. Choi, S.H. Cho, J.H. Lee, S.Y. Lee, J.S. Lee, Thermal stability enhanced tetraethylenepentamine/silica adsorbents for high performance CO₂ capture, Ind. Eng. Chem. Res. 57(2018) 4632-4639.
[37] C. Kim, W. Choi, M. Choi, SO₂-resistant amine-containing CO₂ adsorbent with a surface protection layer, ACS Appl. Mater. Interfaces 11(2019) 16586-16593.
[38] M.J. Lashaki, S. Khiavib, A. Sayari, Stability of amine-functionalized CO₂ adsorbents:a multifaceted puzzle, Chem. Soc. Rev. 48(2019) 3320-3405.
[39] N. Rao, M. Wang, Z. Shang, Y. Hou, G. Fan, J. Li, CO₂ adsorption by aminefunctionalized MCM-41:A comparison between impregnation and grafting modification methods, Energy Fuels 32(2018) 670-677.
[40] X. Xu, C. Song, J.M. Andresen, B.G. Miller, A.W. Scaroni, Novel polyethylenimine-modified mesoporous molecular sieve of MCM-41 type as high-capacity adsorbent for CO₂ capture, Energy Fuels 16(2002) 1463-1469.
[41] X. Zhao, Q. Cui, B. Wang, X. Yan, S. Singh, F. Zhang, X. Gao, Y. Li, Recent progress of amine modified sorbents for capturing CO₂ from flue gas, Chinese J. Chem. Eng. 26(2018) 2292-2302.
[42] X. Wang, X. Ma, C. Song, D.R. Locke, S. Siefert, R.E. Winansc, J. Möllmer, M. Lange, A. Möller, R. Gläser, Molecular basket sorbents polyethylenimine-SBA-15 for CO₂ capture from flue gas:Characterization and sorption properties, Micropor. Mesopor. Mater. 169(2013) 103-111.
[43] T. Gelles, S. Lawson, A. Rownaghi, F. Rezaei, Recent advances in development of amine functionalized adsorbents for CO₂ capture, Adsorption 26(2020) 5-50.
[44] E.S. Sanz-Pérez, A. Arencibia, G. Calleja, R. Sanz, Tuning the textural properties of HMS mesoporous silica. Functionalization towards CO₂ adsorption, Micropor. Mesopor. Mater. 260(2018) 235-244.
[45] Q. Lai, Z. Diao, L. Kong, H. Adidharma, M. Fan, Amine-impregnated silicic acid composite as an efficient adsorbent for CO₂ capture, Appl. Energy 223(2018) 293-301.
[46] C.H. Lee, D.H. Hyeon, H. Jung, W. Chung, D.H. Jo, D.K. Shin, S.H. Kim, Effects of pore structure and PEI impregnation on carbon dioxide adsorption by ZSM-5 zeolites, J. Ind. Eng. Chem. (2015) 251-256.
[47] T.H. Pham, B.K. Lee, J. Kim, Novel improvement of CO₂ adsorption capacity and selectivity by ethylene diamine-modifie d nano zeolite, J. Taiwan Inst. Chem. E 66(2016) 239-248.
[48] J. Pokhrel, N. Bhoria, S. Anastasio, T. Tsoufis, D. Gournisc, G. Romanos, G.N. Karanikolos, CO₂ adsorption behavior of amine-functionalized ZIF-8, graphene oxide, and ZIF-8/graphene oxide composites under dry and wet conditions, Micropor. Mesopor. Mater. 267(2018) 53-67.
[49] S.W. Choi, J. Tang, V.G. Polb, K. Lee, Pollen-derived porous carbon by KOH activation:Effect of physicochemical structure on CO₂ adsorption, J. CO₂ Util. 29(2019) 146-155.
[50] H. Hu, T. Zhang, S. Yuan, S. Tang, Functionalization of multi-walled carbon nanotubes with phenylenediamine for enhanced CO₂ adsorption, Adsorption 23(2017) 73-85.
[51] R. Sanz, G. Calleja, A. Arencibia, E.S. Sanz-Perez, CO₂ adsorption on branched polyethyleneimine-impregnated mesoporous silica SBA-15, Appl. Surf. Sci. 256(2010) 5323-5328.
[52] X. Yan, L. Zhang, Y. Zhang, G. Yang, Z. Yan, Amine-modified SBA-15:Effect of pore structure on the performance for CO₂ capture, Ind. Eng. Chem. Res. 50(2011) 3220-3226.
[53] S. Xian, F. Xu, C. Ma, Y. Wu, Q. Xia, H. Wang, Z. Li, Vapor-enhanced CO₂ adsorption mechanism of composite PEI@ZIF-8 modified by polyethyleneimine for CO₂/N₂ separation, Chem. Eng. J. 280(2015) 363-369.
[54] S. Loganathan, M. Tikmani, A.K. Ghoshal, Pore-expanded MCM-41 for CO₂ adsorption:Experimental and isotherm modeling studies, Chem. Eng. J. 280(2015) 9-17.
[55] S. Ahmed, A. Ramli, S. Yusup, Muhammad Farooq, Adsorption behavior of tetraethylenepentamine-functionalized Si-MCM-41 for CO₂ adsorption, Chem. Eng. Res. Des. 122(2017) 33-42.
[56] Y. Chua, J. Hou, C. Boyer, J.J. Richardsond, K. Liang, J. Xu, Biomimetic synthesis of coordination network materials:Recent advances in MOFs and MPNs, Appl. Mater. Today 10(2018) 93-105.
[57] D.R. Kumar, C. Rosu, A.R. Sujan, M.A.S. Novak, E.W. Ping, C.W. Jones, Alkyl-aryl amine-rich molecules for CO₂ removal via direct air capture, ACS Sustainable Chem. Eng. 8(2020) 10971-10982.
[58] H. Fan, Z. Wu, Q. Xu, T. Sun, Flexible, amine-modified silica aerogel with enhanced carbon dioxide capture performance, J. Porous Mater. 23(2016) 131-137.
[59] R. Sanz, G. Calleja, A. Arencibia, E.S. Sanz-Pére, CO₂ uptake and adsorption kinetics of pore-expanded SBA-15 double-functionalized with amino groups, Energy Fuels 27(2013) 7637-7644.
[60] X. Wang, L. Chen, Q. Guo, Development of hybrid amine-functionalized MCM-41 sorbents for CO₂ capture, Chem. Eng. J. 260(2015) 573-581.
[61] Z. Lin, J. Wei, L. Geng, D. Mei, L. Liao, A novel amine double functionalized composite strategy for CO₂ adsorbent preparation using ZSM-5/KIT-6 composite as support, Energy Technol. 12(2018) 236-247.
[62] S. Ahmed, A. Ramli, S. Yusup, Development of polyethyleniminefunctionalized mesoporous Si-MCM-41 for CO₂ adsorption, Fuel Process. Technol. 167(2017) 622-630.
[63] A.H. Gorji, Y. Yang, A. Sayari, Effect of the pore length on CO₂ adsorption over amine-modified mesoporous silicas, Energy Fuels 25(2011) 4206-4210.
[64] Z. Liu, Y. Teng, K. Zhang, H. Chen, Y. Yang, CO₂ adsorption performance of different amine-based siliceous MCM-41 materials, J. Energy Chem. 24(2015) 322-330.
[65] L. Zhang, X. Wang, M. Fujii, L. Yang, C. Song, CO₂ capture over molecular basket sorbents:Effects of SiO₂ supports and PEG additive, J. Energy Chem. 26(2017) 1030-1038.
[66] L. Zhang, N. Zhan, Q. Jin, H. Liu, J. Hu, Impregnation of polyethylenimine in mesoporous multilamellar silica vesicles for CO₂ capture:A kinetic study, Ind. Eng. Chem. Res. 55(2016) 5885-5891.
[67] R. Kishor, A.K. Ghoshal, Amine-modified mesoporous silica for CO₂ adsorption:The role of structural parameters, Ind. Eng. Chem. Res. 56(2017) 6078-6087.
[68] J. Wang, D. Long, H. Zhou, Q. Chen, X. Liu, L. Ling, Surfactant promoted solid amine sorbents for CO₂ capture, Energy Environ. Sci. 5(2012) 5742-5749.
[69] F. Liu, K. Huang, L. Jiang, Promoted adsorption of CO₂ on amine-impregnated adsorbents by functionalized ionic liquids, AIChE J. 64(2018) 3671-3680.
[70] Q.T. Vu, H. Yamad, K. Yogo, Exploring the role of imidazoles in amineimpregnated mesoporous silica for CO₂ capture, Ind. Eng. Chem. Res. 57(2018) 2638-2644.
[71] J.T. Anyanwu, Y. Wang, R.T. Yang, Amine-grafted silica gels for CO₂ capture including direct air capture, Ind. Eng. Chem. Res. 59(2020) 7072-7079.
[72] M.J. Lashaki, A. Sayari, CO₂ capture using triamine-grafted SBA-15:The impact of the support pore structure, Chem. Eng. J. 334(2018) 1260-1269.
[73] K. Hori, T. Higuchi, Y. Aoki, M. Miyamoto, Y. Oumi, K. Yogo, S. Uemiya, Effect of pore size, aminosilane density and aminosilane molecular length on CO₂ adsorption performance in aminosilane modified mesoporous silica, Micropor. Mesopor. Mater. 246(2017) 158-165.
[74] W. Klinthong, K.J. Chao, C.S. Tan, CO₂ capture by as-synthesized aminefunctionalized MCM-41 prepared through direct synthesis under basic condition, Ind. Eng. Chem. Res. 52(2013) 9834-9842.
[75] W. Klinthong, C.H. Huang, Ch.S. Tan, One-pot synthesis and pelletizing of polyethylenimine-containing mesoporous silica powders for CO₂ capture, Ind. Eng. Chem. Res. 55(2016) 6481-6491.
[76] F.Q. Liu, L. Wang, Z.G. Huang, C.Q. Li, W. Li, R.X. Li, W. Li, Amine-tethered Adsorbents based on three-dimensional macroporous silica for CO₂ capture from simulated flue gas and air, ACS Appl. Mater. Interfaces 6(2014) 4371-4381.
[77] L. Wei, Y. Jing, Z. Gao, Y. Wang, Development of a pentaethylenehexaminemodified solid support adsorbent for CO₂ capture from model flue gas, Chinese J. Chem. Eng. 23(2015) 366-371.
[78] M.B. Yue, Y. Chun, Y. Cao, X. Dong, J.H. Zhu, CO₂ capture by as-prepared SBA-15 with an occluded organic template, Adv. Funct. Mater. 16(2006) 1717-1722.
[79] R. Kishor, A.K.G. Hoshal, High molecular weight polyethyleneimine functionalized three dimensional mesoporous silica for regenerable CO₂ separation, Chem. Eng. J. 300(2016) 236-244.
[80] X. Yan, L. Zhang, Y. Zhang, K. Qiao, Z. Yana, S. Komarneni, Amine-modified mesocellular silica foams for CO₂ capture, Chem. Eng. J. 168(2011) 918-924.
[81] X. Feng, G. Hu, X. Hu, G. Xie, Y. Xie, J. Lu, Lu. Me, Tetraethylenepentaminemodified siliceous mesocellular foam (MCF) for CO₂ capture, Ind. Eng. Chem. Res. 52(2013) 4221-4228.
[82] G. Zhang, P. Zhao, Y. Xu, Development of amine-functionalized hierarchically porous silica for CO₂ capture, J. Ind. Eng. Chem. 54(2017) 59-68.
[83] C. Chen, S.T. Yang, W.S. Ahn, R. Ryoo, Amine-impregnated silica monolith with a hierarchical pore structure:Enhancement of CO₂ capture capacity, Chem. Commun. 24(2009) 3627-3629.
[84] C. Ji, X. Huang, L. Li, F. Xiao, N. Zhao, W. Wei, Pentaethylenehexamine-loaded hierarchically porous silica for CO₂ adsorption, Materials 9(2016) 835-852.
[85] G. Zhang, P. Zhao, L. Hao, Y. Xu, Amine-modified SBA-15(P):A promising adsorbent for CO₂ capture, J. CO₂ Util. 24(2018) 22-33.
[86] L. Zhou, J. Fan, G. Cui, X. Shang, Q. Tang, J. Wang, M. Fan, Highly efficient and reversible CO₂ adsorption by amine-grafted platelet SBA-15 with expanded pore diameters and short mesochannels, Green Chem. 16(2014) 4009-4016.
[87] R. Kishor, A. Kumar Ghoshal, APTES grafted ordered mesoporous silica KIT-6 for CO₂ adsorption, Chem. Eng. J. 262(2015) 882-890.
[88] T. Watabe, K. Yogo, Isotherms and isosteric heats of adsorption for CO₂ in amine-functionalized mesoporous silicas, Sep. Purif. Technol. 120(2013) 20-23.
[89] K. Sim, N. Lee, J. Kim, E.B. Cho, C. Gunathilake, M. Jaroniec, CO₂ adsorption on amine-functionalized periodic mesoporous benzenesilicas, ACS Appl. Mater. Interfaces 7(2015) 6792-6802.
[90] N.N. Linneen, R. Pfeffer, Y.S. Lin, CO₂ adsorption performance for amine grafted particulate silica aerogels, Chem. Eng. J. 254(2014) 190-197.
[91] S. Cui, W. Cheng, X. Shen, M. Fan, Armistead (Ted) Russell, Z. Wu, X. Yi, Mesoporous amine-modified SiO₂ aerogel:A potential CO₂ sorbent, Energy Environ. Sci. 4(2011) 2070-2074.
[92] Y. Kong, G. Jiang, M. Fan, X. Shen, S. Cuibc, A.G. Russelld, A new aerogel-based CO₂ adsorbent developed using a simple sol-gel method along with supercritical drying, Chem. Commun. 50(2014) 12158-12161.
[93] R. Chatterjee, B. Sajjadi, D.L. Mattern, W. Chen, T. Zubatiukc, D. Leszczynskac, J. Leszczynskic, N.O. Egiebord, N. Hammer, Ultrasound cavitation intensified amine functionalization:A feasible strategy for enhancing CO₂ capture capacity of biochar, Fuel 225(2018) 287-298.
[94] W. Tian, H. Zhang, X. Duan, H. Sun, G. Shao, S. Wang, Porous carbons:Structure-oriented design and versatile applications, Adv. Funct. Mater. 30(2020) 1909265-1909306.
[95] M. Wang, L. Yao, J. Wang, Z. Zhang, W. Qiao, D. Long, L. Ling, Adsorption and regeneration study of polyethylenimine-impregnated millimeter-sized mesoporous carbon spheres for post-combustion CO₂ capture, Appl. Energy 168(2016) 282-290.
[96] H. Sun, T. Wang, Y. Xu, W. Gao, P. Li, Q.J. Niu, Fabrication of polyimide and functionalized multi-walled carbon nanotubes mixed matrix membranes by in-situ polymerization for CO₂ separation, Sep. Purif. Technol. 177(2017) 327-336.
[97] M.M. Gui, Y.X. Yap, S.P. Chai, A.R. Mohamed, Multi-walled carbon nanotubes modified with (3-aminopropyl) triethoxysilane for effective carbon dioxide adsorption, Int. J. GreenH. Gas Con. 14(2013) 65-73.
[98] A.K. Mishra, S. Ramaprabhu, Polyaniline/multiwalled carbon nanotubes nanocomposite-an excellent reversible CO₂ capture candidate, RSC Adv. 2(2012) 1746-1750.
[99] E. Molyanyan, S. Aghamiri, M.R. Talaie, N. Iraji, Experimental study of pure and mixtures of CO₂ and CH₄ adsorption on modified carbon nanotube, Int. J. Environ. Sci. Technol. 13(2016) 2001-2010.
[100] Z. Zhou, Cl.M. Anderson,, S.K. Butler, S.K. Thompson, Kevin J. Whitty, T.-C. Shenc, K.J. Stowers, Stability and efficiency of CO₂ capture using linear amine polymer modified carbon nanotubes, J. Mater. Chem. A 5(2017) 10486-10494.
[101] L. Keller, B. Ohs, J. Lenhart, L. Abduly, P. Blanke, M. Wessling, High capacity polyethylenimine impregnated microtubes made of carbon nanotubes for CO₂ capture, Carbon 126(2018) 338-345.
[102] P. Tamilarasan, S. Ramaprabhu, Amine-rich ionic liquid grafted graphene for sub-ambient carbon dioxide adsorption, RSC Adv. 6(2016) 3032-3040.
[103] S.N. Kudahi, A.R. Noorpoor, N.M. Mahmood, Determination and analysis of CO₂ capture kinetics and mechanisms on the novel graphene-based adsorbents, J. CO₂ Util. 21(2017) 17-29.
[104] G.J. Shin, K.Y. Rhee, S.J. Park, Improvement of CO₂ capture by graphite oxide in presence of polyethylenimine, Int. J. Hydrogen Energy 41(2016) 14351-14359.
[105] S. Gadipelli, Y. Lu, N.T. Skipper, T. Yildirim, Z. Guo, Design of hyperporous graphene networks and their application in solid-amine based carbon capture systems, J. Mater. Chem. A 5(2017) 17833-17840.
[106] A. Pruna, A.C. Cárcela, A. Benedito, E. Giménez, Effect of synthesis conditions on CO₂ capture of ethylenediamine-modified graphene aerogels, Appl. Surf. Sci. 487(2019) 228-235.
[107] Y. He, Y. Xia, J. Zhao, Y. Song, L. Yi, L. Zhao, One-step fabrication of PEImodified GO particles for CO₂ capture, Appl. Phys. A-Mater. 125(2019) 160-169.
[108] K. Bhowmik, A. Chakravarty, S. Bysakh, Goutam D, g-Alumina nanorod/reduced graphene oxide as support for poly(ethylenimine) to capture carbon dioxide from flue gas, Energy Technol. 4(2016) 1-12.
[109] J.A.A. Gibson, A.V. Gromov, S. Brandani, E.E.B. Campbel, The effect of pore structure on the CO₂ adsorption efficiency of polyamine impregnated porous carbons, Micropor. Mesopor. Mater. 208(2015) 129-139.
[110] M.S. Lee, S.Y. Lee, S.J. Park, Preparation and characterization of multi-walled carbon nanotubes impregnated with polyethyleneimine for carbon dioxide capture, Int. J. Hydrogen Energy 40(2015) 3425-13421.
[111] M.S. Lee, S.J. Park, Silica-coated multi-walled carbon nanotubes impregnated with polyethyleneimine for carbon dioxide capture under the flue gas condition, J. Solid State Chem. 226(2015) 17-23.
[112] S.C. Hsu, C. Lu, F. Su, W. Zeng, W. Chen, Thermodynamics and regeneration studies of CO₂ adsorption on multiwalled carbon nanotubes, Chem. Eng. Sci. 65(2010) 1354-1361.
[113] Y. Liu, B. Sajjadi, W. Chen, R. Chatterjee, Ultrasound-assisted amine functionalized graphene oxide for enhanced CO₂ adsorption, Fuel 247(2019) 10-18.
[114] O. Cheung, N. Hedin, Zeolites and related sorbents with narrow pores for CO₂ separation from flue gas, RSC Adv. 4(2014) 14480-14494.
[115] C. Chen, S. Kim, W.S. Cho, W.S. Ahn, Polyethylenimine-incorporated zeolite 13X with mesoporosity for post-combustion CO₂ capture, Appl. Surf. Sci. 332(2015) 167-171.
[116] Y. Wang, T. Du, Z. Qiu, Y. Song, S. Che, X. Fang, CO₂ adsorption on polyethylenimine-modified ZSM-5 zeolite synthesized from rice husk ash, Mater. Chem. Phys. 207(2018) 105-113.
[117] D. Panda, E.A. Kumar, S.K. Singh, Amine modification of binder-containing zeolite 4A bodies for post-combustion CO₂ capture, Ind. Eng. Chem. Res. 58(2019) 5301-5313.
[118] A. Kalantarifard, A. Ghavaminejad, G.S. Yang, High CO₂ adsorption on improved ZSM-5 zeolite porous structure modified with ethylenediamine and desorption characteristics with microwave, J. Mater Cycles Waste Manag. 19(2017) 394-405.
[119] T.H. Nguyen, S. Kim, S. Kim, T.H. Bae, Hierarchical zeolites with aminefunctionalized mesoporous domains for carbon dioxide capture, ChemSusChem 9(2016) 455-461.
[120] Y. Wang, T. Du, Y. Song, S. Che, X. Fang, L. Zhou, Amine-functionalized mesoporous ZSM-5 zeolite adsorbents for carbon dioxide capture, Solid State Sci. 73(2017) 27-35.
[121] L.A. Darunte, Y. Terada, C.R. Murdock, K.S. Walton, D.S. Sholl, Christopher W. Jones, Monolith-supported amine-functionalized Mg₂(dobpdc) adsorbents for CO₂ capture, ACS Appl. Mater. Interfaces 9(2017) 17042-17050.
[122] Y. Lin, Q. Yan, C. Kong, L. Chen, Polyethyleneimine incorporated metalorganic frameworks adsorbent for highly selective CO₂ capture, Sci. Rep. 3(2013) 1859-1866.
[123] Q. Yan, Y. Lin, C. Kong, L. Chen, Remarkable CO₂/CH₄ selectivity and CO₂ adsorption capacity exhibited by polyamine-decorated metal-organic framework adsorbent, Chem. Commun. 49(2013) 6873-6875.
[124] H. Molavi, A. Eskandari, A. Shojaei, S.A. Mousavi, Enhancing CO₂/N₂ adsorption selectivity via post-synthetic modification of NH₂-UiO-66(Zr), Micropor. Mesopor. Mater. 257(2018) 193-201.
[125] S. Xian, Y. Wu, J. Wu, X. Wang, J. Xiao, Enhanced dynamic CO₂ adsorption capacity and CO₂/CH₄ selectivity on polyethylenimine-impregnated UiO-66, Ind. Eng. Chem. Res. 54(2015) 1115-1158.
[126] Y. Cao, F. Song, Y. Zhao, Q. Zhong, Capture of carbon dioxide from flue gas on TEPA-grafted metal-organic framework Mg₂(dobdc), J. Environ. Sci. 25(2013) 2081-2087.
[127] P.Q. Liao, X.W. Chen, S.Y. Liu, X.Y. Li, Y.T. Xu, M. Tang, Z. Rui, H. Ji, J. Zhang, X. Chen, Putting an ultrahigh concentration of amine groups into a metal-organic framework for CO₂ capture at low pressures, Chem. Sci. 7(2016) 6528-6533.
[128] Y. Belmabkhout, V. Guillerm, M. Eddaoudi, Low concentration CO₂ capture using physical adsorbents:Are metal-organic frameworks becoming the new benchmark materials?, Chem Eng. J. 296(2016) 386-397.
[129] X. Su, L. Bromberg, V. Martis, F. Simeon, A. Huq, T.A. Hatton, Postsynthetic functionalization of Mg-MOF-74 with tetraethylenepentamine:Structural characterization and enhanced CO₂ adsorption, ACS Appl. Mater. Interfaces 9(2017) 11299-11306.

The latest development on amine functionalized solid adsorbents for post-combustion CO₂ capture: Analysis review

The latest development on amine functionalized solid adsorbents for post-combustion CO₂ capture: Analysis review

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	Yingli Li, Zhishuncheng Li, Guangfei Qu, Rui Li, Shuaiyu Liang, Junhong Zhou, Wei Ji, Huiming Tang. Mechanism, behaviour and application of iron nitrate modified carbon nanotube composites for the adsorption of arsenic in aqueous solutions[J]. 中国化学工程学报, 2023, 60(8): 26-36.
[2]	Jing Huang, Honghui Cai, Qian Zhao, Yunpeng Zhou, Haibo Liu, Jing Wang. Dual-functional pyrene implemented mesoporous silicon material used for the detection and adsorption of metal ions[J]. 中国化学工程学报, 2023, 60(8): 108-117.
[3]	Lingli Chen, Yueting Shi, Sijun Xu, Junle Xiong, Fang Gao, Shengtao Zhang, Hongru Li. Enhanced adsorption of target branched compounds including antibiotic norfloxacin frameworks on mild steel surface for efficient protection: An experimental and molecular modelling study[J]. 中国化学工程学报, 2023, 60(8): 212-227.
[4]	Alexander Nti Kani, Evans Dovi, Aaron Albert Aryee, Runping Han, Zhaohui Li, Lingbo Qu. Mechanisms and reusability potentials of zirconium-polyaziridine-engineered tiger nut residue towards anionic pollutants[J]. 中国化学工程学报, 2023, 60(8): 275-292.
[5]	Yuan Liu, Hanting Xiong, Jingwen Chen, Shixia Chen, Zhenyu Zhou, Zheling Zeng, Shuguang Deng, Jun Wang. One-step ethylene separation from ternary C₂ hydrocarbon mixture with a robust zirconium metal-organic framework[J]. 中国化学工程学报, 2023, 59(7): 9-15.
[6]	Hui Jiang, Zijian Zhao, Ning Yu, Yi Qin, Zhengwei Luo, Wenhua Geng, Jianliang Zhu. Synthesis, characterization, and performance comparison of boron using adsorbents based on N-methyl-D-glucosamine[J]. 中国化学工程学报, 2023, 59(7): 16-31.
[7]	Runze Chen, Yuran Chen, Xuemin Liang, Yapeng Kong, Yangyang Fan, Quan Liu, Zhenyu Yang, Feiying Tang, Johnny Muya Chabu, Maru Dessie Walle, Liqiang Wang. Oxidative exfoliation of spent cathode carbon: A two-in-one strategy for its decontamination and high-valued application[J]. 中国化学工程学报, 2023, 59(7): 262-269.
[8]	Shanghong Ma, Haitao Zhang, Jianbo Qu, Xiuzhong Zhu, Qingfei Hu, Jianyong Wang, Peng Ye, Futao Sai, Shiwei Chen. Preparation of waterborne polyurethane/β-cyclodextrin composite nanosponge by ion condensation method and its application in removing of dyes from wastewater[J]. 中国化学工程学报, 2023, 58(6): 124-136.
[9]	Yueting Shi, Junhai Zhao, Lingli Chen, Hongru Li, Shengtao Zhang, Fang Gao. Double open mouse-like terpyridine parts based amphiphilic ionic molecules displaying strengthened chemical adsorption for anticorrosion of copper in sulfuric acid solution[J]. 中国化学工程学报, 2023, 57(5): 233-246.
[10]	Jian Wang, Yuanhui Shen, Donghui Zhang, Zhongli Tang, Wenbin Li. Integrated vacuum pressure swing adsorption and Rectisol process for CO₂ capture from underground coal gasification syngas[J]. 中国化学工程学报, 2023, 57(5): 265-279.
[11]	Yujia Cui, Zhiqiang Tan, Yanan Wang, Shuxian Shi, Xiaonong Chen. One-step crosslinking preparation of tannic acid particles for the adsorption and separation of cationic dyes[J]. 中国化学工程学报, 2023, 57(5): 309-318.
[12]	Shanshan Mao, Tao Shen, Qing Zhao, Tong Han, Fan Ding, Xin Jin, Manglai Gao. Selective capture of silver ions from aqueous solution by series of azole derivatives-functionalized silica nanosheets[J]. 中国化学工程学报, 2023, 57(5): 319-328.
[13]	Xingzhong Li, Kunlin Yu, Zibo He, Bo Liu, Rongfei Zhou, Weihong Xing. Improved SSZ-13 thin membranes fabricated by seeded-gel approach for efficient CO₂ capture[J]. 中国化学工程学报, 2023, 56(4): 273-280.
[14]	Hany M. Abd El-Lateef, Mai M. Khalaf, K. Shalabi, Antar A. Abdelhamid. Multicomponent synthesis and designing of tetrasubstituted imidazole compounds catalyzed via ionic-liquid for acid steel corrosion protection: Experimental exploration and theoretical calculations[J]. 中国化学工程学报, 2023, 55(3): 304-319.
[15]	Zhongqi Ren, Jie Wang, Hewei Zhang, Fan Zhang, Shichao Tian, Zhiyong Zhou. Adsorption of rubidium ion from aqueous solution by surface ion imprinted materials[J]. 中国化学工程学报, 2023, 54(2): 1-10.