Enhanced stability of Fe-modified CuO-ZnO-ZrO2-Al2O3/HZSM-5 bifunctional catalysts for dimethyl ether synthesis from CO2 hydrogenation

doi:10.1016/j.cjche.2020.11.031

中国化学工程学报 ›› 2021, Vol. 38 ›› Issue (10): 106-113.DOI: 10.1016/j.cjche.2020.11.031

• Catalysis, Kinetics and Reaction Engineering • 上一篇下一篇

Enhanced stability of Fe-modified CuO-ZnO-ZrO₂-Al₂O₃/HZSM-5 bifunctional catalysts for dimethyl ether synthesis from CO₂ hydrogenation

Xiao Fan¹, Shoujie Ren¹, Baitang Jin¹, Shiguang Li², Miao Yu³, Xinhua Liang¹

1. Department of Chemical and Biochemical Engineering, Missouri University of Science and Technology, Rolla, MO 65409, United States;
2. Gas Technology Institute, 1700 South Mount Prospect Road, Des Plaines, IL 60018, United States;
3. Department of Chemical and Biological Engineering, Rensselaer Polytechnic Institute, Troy, NY 12180, United States

收稿日期:2020-07-08 修回日期:2020-10-26 出版日期:2021-10-28 发布日期:2021-12-02
通讯作者: Xinhua Liang
基金资助:
This work was supported by the U.S. Department of Energy through contract DE-AR0000806. We thank DOE ARPA-E Project Director, Dr. Grigorii Soloveichik, for his assistance and support.

Enhanced stability of Fe-modified CuO-ZnO-ZrO₂-Al₂O₃/HZSM-5 bifunctional catalysts for dimethyl ether synthesis from CO₂ hydrogenation

Xiao Fan¹, Shoujie Ren¹, Baitang Jin¹, Shiguang Li², Miao Yu³, Xinhua Liang¹

1. Department of Chemical and Biochemical Engineering, Missouri University of Science and Technology, Rolla, MO 65409, United States;
2. Gas Technology Institute, 1700 South Mount Prospect Road, Des Plaines, IL 60018, United States;
3. Department of Chemical and Biological Engineering, Rensselaer Polytechnic Institute, Troy, NY 12180, United States

Received:2020-07-08 Revised:2020-10-26 Online:2021-10-28 Published:2021-12-02
Contact: Xinhua Liang
Supported by:
This work was supported by the U.S. Department of Energy through contract DE-AR0000806. We thank DOE ARPA-E Project Director, Dr. Grigorii Soloveichik, for his assistance and support.

摘要/Abstract

摘要： A series of iron (Fe) modified CuO-ZnO-ZrO₂-Al₂O₃ (CZZA) catalysts, with various Fe loadings, were prepared using a co-precipitation method. A bifunctional catalyst, consisting of Fe-modified CZZA and HZSM-5, was studied for dimethyl ether (DME) synthesis via CO₂ hydrogenation. The effects of Fe loading, reaction temperature, reaction pressure, space velocity, and concentrations of precursor for the synthesis of the Fe-modified CZZA catalyst on the catalytic activity of DME synthesis were investigated. Long-term stability tests showed that Fe modification of the CZZA catalyst improved the catalyst stability for DME synthesis via CO₂ hydrogenation. The activity loss, in terms of DME yield, was significantly reduced from 4.2% to 1.4% in a 100 h run of reaction, when the Fe loading amount was 0.5 (molar ratio of Fe to Cu). An analysis of hydrogen temperature programmed reduction revealed that the introduction of Fe improved the reducibility of the catalysts, due to assisted adsorption of H₂ on iron oxide. The good stability of Fe-modified CZZA catalysts in the DME formation was most likely attributed to oxygen spillover that was introduced by the addition of iron oxide. This could have inhibited the oxidation of the Cu surface and enhanced the thermal stability of copper during long-term reactions.

关键词: CO₂ hydrogenation, Cu-ZnO based catalyst, Iron (Fe), Dimethyl ether (DME), Stability

Abstract: A series of iron (Fe) modified CuO-ZnO-ZrO₂-Al₂O₃ (CZZA) catalysts, with various Fe loadings, were prepared using a co-precipitation method. A bifunctional catalyst, consisting of Fe-modified CZZA and HZSM-5, was studied for dimethyl ether (DME) synthesis via CO₂ hydrogenation. The effects of Fe loading, reaction temperature, reaction pressure, space velocity, and concentrations of precursor for the synthesis of the Fe-modified CZZA catalyst on the catalytic activity of DME synthesis were investigated. Long-term stability tests showed that Fe modification of the CZZA catalyst improved the catalyst stability for DME synthesis via CO₂ hydrogenation. The activity loss, in terms of DME yield, was significantly reduced from 4.2% to 1.4% in a 100 h run of reaction, when the Fe loading amount was 0.5 (molar ratio of Fe to Cu). An analysis of hydrogen temperature programmed reduction revealed that the introduction of Fe improved the reducibility of the catalysts, due to assisted adsorption of H₂ on iron oxide. The good stability of Fe-modified CZZA catalysts in the DME formation was most likely attributed to oxygen spillover that was introduced by the addition of iron oxide. This could have inhibited the oxidation of the Cu surface and enhanced the thermal stability of copper during long-term reactions.

Key words: CO₂ hydrogenation, Cu-ZnO based catalyst, Iron (Fe), Dimethyl ether (DME), Stability

Xiao Fan, Shoujie Ren, Baitang Jin, Shiguang Li, Miao Yu, Xinhua Liang. Enhanced stability of Fe-modified CuO-ZnO-ZrO₂-Al₂O₃/HZSM-5 bifunctional catalysts for dimethyl ether synthesis from CO₂ hydrogenation[J]. 中国化学工程学报, 2021, 38(10): 106-113.

参考文献

[1] A. Ateka, P. Pérez-Uriarte, M. Gamero, J. Ereña, A.T. Aguayo, J. Bilbao, A comparative thermodynamic study on the CO₂ conversion in the synthesis of methanol and of DME, Energy 120 (2017) 796-804
[2] G. Bonura, M. Cordaro, L. Spadaro, C. Cannilla, F. Arena, F. Frusteri, Hybrid Cu-ZnO-ZrO₂/H-ZSM5 system for the direct synthesis of DME by CO₂ hydrogenation, Appl. Catal. B 140-141 (2013) 16-24
[3] S.P. Naik, T. Ryu, V. Bui, J.D. Miller, N.B. Drinnan, W. Zmierczak, Synthesis of DME from CO₂/H₂ gas mixture, Chem. Eng. J. 167 (2011) 362-368
[4] G. Leonzio, State of art and perspectives about the production of methanol, dimethyl ether and syngas by carbon dioxide hydrogenation, J. CO 27 (2018) 326-354
[5] M. Martín, Optimal year-round production of DME from CO₂ and water using renewable energy, J. CO 13 (2016) 105-113
[6] S. Ren, S. Li, N. Klinghoffer, M. Yu, X. Liang, Effects of mixing methods of bifunctional catalysts on catalyst stability of DME synthesis via CO₂ hydrogenation, Carbon Resources Conversion 2 (2019) 85-94
[7] A. García-Trenco, A. Martínez, Direct synthesis of DME from syngas on hybrid CuZnAl/ZSM-5 catalysts: New insights into the role of zeolite acidity, Appl. Catal. A 411-412 (2012) 170-179
[8] Y. Tan, H. Xie, H. Cui, Y. Han, B. Zhong, Modification of Cu-based methanol synthesis catalyst for dimethyl ether synthesis from syngas in slurry phase, Catal. Today 104 (2005) 25-29
[9] A. Venugopal, J. Palgunadi, J.K. Deog, O. Joo, C. Shin, Dimethyl ether synthesis on the admixed catalysts of Cu-Zn-Al-M (M=Ga, La, Y, Zr) and γ-Al₂O₃: The role of modifier, J. Mol. Catal. A: Chem. 302 (2009) 20-27
[10] S. Ren, W.R. Shoemaker, X. Wang, Z. Shang, N. Klinghoffer, S. Li, M. Yu, X. He, T.A. White, X. Liang, Highly active and selective Cu-ZnO based catalyst for methanol and dimethyl ether synthesis via CO₂ hydrogenation, Fuel 239 (2019) 1125-1133
[11] J. Sun, G. Yang, Y. Yoneyama, N. Tsubaki, Catalysis chemistry of dimethyl ether synthesis, ACS Catal. 4 (2014) 3346-3356
[12] J.T. Sun, I.S. Metcalfe, M. Sahibzada, Deactivation of Cu/ZnO/Al₂O₃ methanol synthesis catalyst by sintering, Ind. Eng. Chem. Res. 38 (1999) 3868-3872
[13] M. Kurtz, H. Wilmer, T. Genger, O. Hinrichsen, M. Muhler, Deactivation of supported copper catalysts for methanol synthesis, Catal. Lett. 86 (2003) 77-80
[14] G.R. Moradi, M. Nazari, F. Yaripour, The interaction effects of dehydration function on catalytic performance and properties of hybrid catalysts upon LPDME process, Fuel Process. Technol. 89 (2008) 1287-1296
[15] Y. Wang, W. Gao, K. Li, Y. Zheng, Z. Xie, W. Na, J.G. Chen, H. Wang, Strong evidence of the role of H₂O in affecting methanol selectivity from CO₂ hydrogenation over Cu-ZnO-ZrO₂, Chem 6 (2020) 419-430
[16] J. Cao, Y. Wang, X. Yu, S. Wang, S. Wu, Z. Yuan, Mesoporous CuO-Fe₂O₃ composite catalysts for low-temperature carbon monoxide oxidation, Appl. Catal. B 79 (2008) 26-34
[17] R. Liu, Z. Qin, H. Ji, T. Su, Synthesis of dimethyl ether from CO₂ and H₂ using a Cu-Fe-Zr/HZSM-5 catalyst system, Ind. Eng. Chem. Res. 52 (2013) 16648-16655
[18] Y. Zhou, S. Wang, M. Xiao, D. Han, Y. Lu, Y. Meng, Novel Cu-Fe bimetal catalyst for the formation of dimethyl carbonate from carbon dioxide and methanol, RSC Adv. 2 (2012) 6831-6837
[19] K. Sirichaiprasert, A. Luengnaruemitchai, S. Pongstabodee, Selective oxidation of CO to CO₂ over Cu-Ce-Fe-O composite-oxide catalyst in hydrogen feed stream, Int. J. Hydrogen Energy 32 (2007) 915-926
[20] X. Zhou, T. Su, Y. Jiang, Z. Qin, H. Ji, Z. Guo, CuO-Fe₂O₃-CeO₂/HZSM-5 bifunctional catalyst hydrogenated CO₂ for enhanced dimethyl ether synthesis, Chem. Eng. Sci. 153 (2016) 10-20
[21] S. Ren, X. Fan, Z. Shang, W.R. Shoemaker, L. Ma, T. Wu, S. Li, N.B. Klinghoffer, M. Yu, X. Liang, Enhanced catalytic performance of Zr modified CuO/ZnO/Al₂O₃ catalyst for methanol and DME synthesis via CO₂ hydrogenation, J. CO 36 (2020) 82-95
[22] Y. Kanai, T. Watanabe, T. Fujitani, T. Uchijima, J. Nakamura, The synergy between Cu and ZnO in methanol synthesis catalysts, Catal. Lett. 38 (1996) 157-163
[23] R. van den Berg, G. Prieto, G. Korpershoek, L.I. van der Wal, A.J. van Bunningen, S. Laegsgaard-Jorgensen, P.E. de Jongh, K.P. de Jong, Structure sensitivity of Cu and CuZn catalysts relevant to industrial methanol synthesis, Nat. Commun. 7 (2016) 13057
[24] M. Gentzen, W. Habicht, D.E. Doronkin, J.D. Grunwaldt, J. Sauer, S. Behrens, Bifunctional hybrid catalysts derived from Cu/Zn-based nanoparticles for single-step dimethyl ether synthesis, Catal. Sci. Technol. 6 (2016) 1054-1063
[25] S.A. Kondrat, P.J. Smith, L. Lu, J.K. Bartley, S.H. Taylor, M.S. Spencer, G.J. Kelly, C.W. Park, C.J. Kiely, G.J. Hutchings, Preparation of a highly active ternary Cu-Zn-Al oxide methanol synthesis catalyst by supercritical CO₂ anti-solvent precipitation, Catal. Today 317 (2018) 12-20
[26] S. Kattel, P. Ramírez, J. Chen, J. Rodriguez, P. Liu, Active sites for CO₂ hydrogenation to methanol on Cu/ZnO catalysts, Science 355 (2017) 1296-1299
[27] C. Chen, Study of iron-promoted Cu/SiO₂ catalyst on high temperature reverse water gas shift reaction, Appl. Catal. A 257 (2004) 97-106
[28] H. Ban, C. Li, K. Asami, K. Fujimoto, Influence of rare-earth elements (La, Ce, Nd and Pr) on the performance of Cu/Zn/Zr catalyst for CH₃OH synthesis from CO₂, Catal. Commun. 54 (2014) 50-54
[29] S. Kiatphuengporn, P. Jantaratana, J. Limtrakul, M. Chareonpanich, Magnetic field-enhanced catalytic CO₂ hydrogenation and selective conversion to light hydrocarbons over Fe/MCM-41 catalysts, Chem. Eng. J. 306 (2016) 866-875
[30] B. Hu, Y. Yin, G. Liu, S. Chen, X. Hong, S.C.E. Tsang, Hydrogen spillover enabled active Cu sites for methanol synthesis from CO₂ hydrogenation over Pd doped CuZn catalysts, J. Catal. 359 (2018) 17-26
[31] I. Abbas, H. Kim, C.-H. Shin, S. Yoon, K.-D. Jung, Differences in bifunctionality of ZnO and ZrO₂ in Cu/ZnO/ZrO₂/Al₂O₃ catalysts in hydrogenation of carbon oxides for methanol synthesis, Appl. Catal. B 258 (2019) 117971
[32] K. Mondal, H. Lorethova, E. Hippo, T. Wiltowski, S.B. Lalvani, Reduction of iron oxide in carbon monoxide atmosphere-reaction controlled kinetics, Fuel Process. Technol. 86 (2004) 33-47
[33] G. Zhao, J. Li, X. Niu, K. Tang, S. Wang, W. Zhu, X. Ma, M. Ru, Y. Yang, Facile synthesis of Mn-doped Fe₂O₃ nanostructures: Enhanced CO catalytic performance induced by manganese doping, New J. Chem. 40 (2016) 3491-3498
[34] D. Martin, D. Duprez, Mobility of surface species on oxides. 1. Isotopic exchange of ¹⁸O₂ with ¹⁶O of SiO₂, Al₂O₃, ZrO₂, MgO, CeO₂, and CeO₂-Al₂O₃. Activation by noble metals. Correlation with oxide basicity, J. Phys. Chem. 100 (1996) 9429-9438
[35] Z. Liu, Y. Liu, B. Chen, T. Zhu, L. Ma, Novel Fe-Ce-Ti catalyst with remarkable performance for the selective catalytic reduction of NOnull by NH₃, Catal. Sci. Technol. 6 (2016) 6688-6696
[36] A.M. Abdel-Mageed, A. Klyushin, A. Knop-Gericke, R. Schlogl, R.J. Behm, Influence of CO on the activation, O-vacancy formation, and performance of Au/ZnO catalysts in CO₂ hydrogenation to methanol, J. Phys. Chem. Lett. 10 (2019) 3645-3653
[37] A. Alvarez, A. Bansode, A. Urakawa, A.V. Bavykina, T.A. Wezendonk, M. Makkee, J. Gascon, F. Kapteijn, Challenges in the greener production of formates/formic acid, methanol, and DME by heterogeneously catalyzed CO₂ hydrogenation processes, Chem. Rev. 117 (2017) 9804-9838
[38] E. Catizzone, G. Bonura, M. Migliori, F. Frusteri, G. Giordano, CO₂ recycling to dimethyl ether: State-of-the-art and perspectives, Molecules 23 (2017) 31
[39] S. Dang, H. Yang, P. Gao, H. Wang, X. Li, W. Wei, Y. Sun, A review of research progress on heterogeneous catalysts for methanol synthesis from carbon dioxide hydrogenation, Catal. Today 330 (2019) 61-75
[40] A. Xin, Z. YiZan, Z. Qiang, W. Dezheng, W. Jinfu, Dimethyl ether synthesis from CO₂ hydrogenation on a CuO-ZnO-Al₂O₃-ZrO₂/HZSM-5 bifunctional catalyst, Ind. Eng. Chem. Res. 47 (2008) 6547-6554
[41] W. Chen, B. Lin, H. Lee, M. Huang, One-step synthesis of dimethyl ether from the gas mixture containing CO₂ with high space velocity, Appl. Energy 98 (2012) 92-101
[42] F. Frusteri, G. Bonura, C. Cannilla, G. Drago Ferrante, A. Aloise, E. Catizzone, M. Migliori, G. Giordano, Stepwise tuning of metal-oxide and acid sites of CuZnZr-MFI hybrid catalysts for the direct DME synthesis by CO₂ hydrogenation, Appl. Catal. B 176-177 (2015) 522-531
[43] G. Moradi, J. Ahmadpour, M. Nazari, F. Yaripour, Effects of feed composition and space velocity on direct synthesis of dimethyl ether from syngas, Ind. Eng. Chem. Res. 47 (2008) 7672-7679
[44] B. Liang, J. Ma, X. Su, C. Yang, H. Duan, H. Zhou, S. Deng, L. Li, Y. Huang, Investigation on deactivation of Cu/ZnO/Al₂O₃ catalyst for CO₂ hydrogenation to methanol, Ind. Eng. Chem. Res. 58 (2019) 9030-9037
[45] A. Ruiz Puigdollers, P. Schlexer, S. Tosoni, G. Pacchioni, Increasing oxide reducibility: The role of metal/oxide interfaces in the formation of oxygen vacancies, ACS Catal. 7 (2017) 6493-6513
[46] J.M. López, A.L. Gilbank, T. García, B. Solsona, S. Agouram, L. Torrente-Murciano, The prevalence of surface oxygen vacancies over the mobility of bulk oxygen in nanostructured ceria for the total toluene oxidation, Appl. Catal. B 174-175 (2015) 403-412
[47] J.S. Hayward, P.J. Smith, S.A. Kondrat, M. Bowker, G.J. Hutchings, The effects of secondary oxides on copper-based catalysts for green methanol synthesis, ChemCatChem 9 (2017) 1655-1662

Enhanced stability of Fe-modified CuO-ZnO-ZrO₂-Al₂O₃/HZSM-5 bifunctional catalysts for dimethyl ether synthesis from CO₂ hydrogenation

Enhanced stability of Fe-modified CuO-ZnO-ZrO₂-Al₂O₃/HZSM-5 bifunctional catalysts for dimethyl ether synthesis from CO₂ hydrogenation

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	Peipei Ai, Huiqing Jin, Jie Li, Xiaodong Wang, Wei Huang. Ultra-stable Cu-based catalyst for dimethyl oxalate hydrogenation to ethylene glycol[J]. 中国化学工程学报, 2023, 60(8): 186-193.
[2]	Bingxiao Feng, Lining Hao, Chaoting Deng, Jiaqiang Wang, Hongbing Song, Meng Xiao, Tingting Huang, Quanhong Zhu, Hengjun Gai. A highly hydrothermal stable copper-based catalyst for catalytic wet air oxidation of m-cresol in coal chemical wastewater[J]. 中国化学工程学报, 2023, 57(5): 338-348.
[3]	Xia Xiong, Zuohua Liu, Changyuan Tao, Yundong Wang, Fangqin Cheng, Hong Li. Reduced power consumption in stirred vessel with high solid loading by equipping punched baffles[J]. 中国化学工程学报, 2023, 56(4): 203-214.
[4]	Tinghao Jia, Yunbo Yu, Qing Liu, Yao Yang, Ji-Jun Zou, Xiangwen Zhang, Lun Pan. Theoretical and experimental study on the inhibition of jet fuel oxidation by diarylamine[J]. 中国化学工程学报, 2023, 56(4): 225-232.
[5]	Zida Ma, Yuxia Li, Mengmeng Jin, Xiaoqin Liu, Linbing Sun. Fabrication of adsorbents with enhanced Cu^I stability: Creating a superhydrophobic microenvironment through grafting octadecylamine[J]. 中国化学工程学报, 2023, 55(3): 41-48.
[6]	Dahai Jiang, Zhidi Min, Jing Leng, Huanqing Niu, Yong Chen, Dong Liu, Chenjie Zhu, Ming Li, Wei Zhuang, Hanjie Ying. Characterization of two halophilic adenylate cyclases from Thermobifida halotolerans and Haloactinopolyspora alba[J]. 中国化学工程学报, 2023, 53(1): 56-62.
[7]	Pascal Habimana, Yanjun Jiang, Jing Gao, Jean Bernard Ndayambaje, Osama M. Darwesh, Jean Pierre Mwizerwa, Xiaobing Zheng, Li Ma. Enhancing laccase stability and activity for dyes decolorization using ZIF-8@MWCNT nanocomposite[J]. 中国化学工程学报, 2022, 48(8): 66-75.
[8]	Chunyu Zhang, Yan Sun, Xiaoyan Dong. Conjugation of a zwitterionic polymer with dimethyl chains to lipase significantly increases the enzyme activity and stability[J]. 中国化学工程学报, 2022, 47(7): 48-53.
[9]	Fu Yang, Wenhao Li, Rui Ou, Yutong Lu, Xuexue Dong, Wenlong Tu, Wenjian Zhu, Xuyu Wang, Lulu Li, Aihua Yuan, Jianming Pan. Superb VOCs capture engineering carbon adsorbent derived from shaddock peel owning uncompromising thermal-stability and adsorption property[J]. 中国化学工程学报, 2022, 47(7): 120-133.
[10]	Shiqi Yang, Zhentao Wang, Qian Kong, Bin Li, Junfeng Wang. Visualization on electrified micro-jet instability from Taylor cone in electrohydrodynamic atomization[J]. 中国化学工程学报, 2022, 44(4): 456-465.
[11]	Bo Wu, Xing Yu, Min Huang, Liangshu Zhong, Yuhan Sun. Rh single atoms embedded in CeO₂ nanostructure boost CO₂ hydrogenation to HCOOH[J]. 中国化学工程学报, 2022, 43(3): 62-69.
[12]	Qingxia Xiong, Ying Ren, Yufei Xia, Guanghui Ma, Reiji Noda, Wei Ge. Molecular dynamics simulations of ovalbumin adsorption at squalene/water interface[J]. 中国化学工程学报, 2022, 50(10): 369-378.
[13]	Saboura Ashkevarian, Jalil Badraghi, Fatemeh Mamashli, Behdad Delavari, Ali Akbar Saboury. Covalent immobilization and characterization of Rhizopus oryzae lipase on core-shell cobalt ferrite nanoparticles for biodiesel production[J]. 中国化学工程学报, 2021, 37(9): 128-136.
[14]	Huawei Zhu, Haifeng Yu, Zhaofeng Yang, Hao Jiang, Chunzhong Li. Tungsten and phosphate polyanion co-doping of Ni-ultrahigh cathodes greatly enhancing crystal structure and interface stability[J]. 中国化学工程学报, 2021, 37(9): 144-151.
[15]	Chen Xu, Zhenyi Du, Shiqi Yang, Hongda Ma, Jie Feng. Effects of inherent potassium on the catalytic performance of Ni/biochar for steam reforming of toluene as a tar model compound[J]. 中国化学工程学报, 2021, 35(7): 189-195.