SCI和EI收录∣中国化工学会会刊

中国化学工程学报 ›› 2021, Vol. 38 ›› Issue (10): 266-275.DOI: 10.1016/j.cjche.2021.04.006

• Materials and Product Engineering • 上一篇    下一篇

Polymeric ionic liquids (PILs) with high acid density: Tunable catalytic performance for biodiesel production

Xiaocheng Lin1, Youjie Huang1, Ling Li1, Changshen Ye1, Jie Chen1,2, Ting Qiu1   

  1. 1. Engineering Research Center of Reaction Distillation, Fujian Province University, College of Chemical Engineering, Fuzhou University, Fuzhou 350116, China;
    2. College of Environment and Resources, Fuzhou University, Fuzhou 350116, China
  • 收稿日期:2021-01-12 修回日期:2021-04-08 出版日期:2021-10-28 发布日期:2021-12-02
  • 通讯作者: Jie Chen, Ting Qiu
  • 基金资助:
    We acknowledged the National Natural Science Foundation of China (21878054), Project on the Integration of Industry and Education of Fujian Province (2018Y4008), Science and Technology Project of Fujian Educational Committee (JAT190051), Fuzhou University Testing Fund of precious apparatus (2020T008) and Research Initiation Funding of Fuzhou University (GXRC-19051). X. Lin also acknowledged the Award Program for Minjiang Scholar Professorship.

Polymeric ionic liquids (PILs) with high acid density: Tunable catalytic performance for biodiesel production

Xiaocheng Lin1, Youjie Huang1, Ling Li1, Changshen Ye1, Jie Chen1,2, Ting Qiu1   

  1. 1. Engineering Research Center of Reaction Distillation, Fujian Province University, College of Chemical Engineering, Fuzhou University, Fuzhou 350116, China;
    2. College of Environment and Resources, Fuzhou University, Fuzhou 350116, China
  • Received:2021-01-12 Revised:2021-04-08 Online:2021-10-28 Published:2021-12-02
  • Contact: Jie Chen, Ting Qiu
  • Supported by:
    We acknowledged the National Natural Science Foundation of China (21878054), Project on the Integration of Industry and Education of Fujian Province (2018Y4008), Science and Technology Project of Fujian Educational Committee (JAT190051), Fuzhou University Testing Fund of precious apparatus (2020T008) and Research Initiation Funding of Fuzhou University (GXRC-19051). X. Lin also acknowledged the Award Program for Minjiang Scholar Professorship.

摘要: A series of polymeric ionic liquids (PILs) used as effective heterogeneous catalysts for biodiesel production via esterification of free fatty acids (FFAs) were effectively prepared by the reaction of poly (ethylene imine) (PEI) polymers with different molecular weight and 1,3-propanesultone, followed by the further acidification with differential effective acids, i.e. H2SO4, CF3SO3H, CH3SO3H or p-toluenesulfonic acid (p-TSA). Ultrahigh acidity and catalytic performance were achieved and could be fine-tuned by simply adjusting the molecular weight of PEI and by further treatment of acids. Specifically, under the optimal conditions (i.e. reaction temperature was 70 ℃, reaction time was 2.0 h, catalyst dosage was 3.15% (mass), and alcohol/acid molar ratio was 14:1) acquired through the Box-BEHNKEN response surface methodology, a high oleic acid conversion of 98.42% could be obtained over the optimal PIL, PEI(70000)-PS-p-TSA. Additionally, our PILs also showed high generality for esterification of other FFAs, with general high conversion over 90% noted in each case even under much milder reaction conditions compared to other conventional catalysts.

关键词: Catalyst, Ionic liquids, Biodiesel, Poly (ethylene imine), Esterification

Abstract: A series of polymeric ionic liquids (PILs) used as effective heterogeneous catalysts for biodiesel production via esterification of free fatty acids (FFAs) were effectively prepared by the reaction of poly (ethylene imine) (PEI) polymers with different molecular weight and 1,3-propanesultone, followed by the further acidification with differential effective acids, i.e. H2SO4, CF3SO3H, CH3SO3H or p-toluenesulfonic acid (p-TSA). Ultrahigh acidity and catalytic performance were achieved and could be fine-tuned by simply adjusting the molecular weight of PEI and by further treatment of acids. Specifically, under the optimal conditions (i.e. reaction temperature was 70 ℃, reaction time was 2.0 h, catalyst dosage was 3.15% (mass), and alcohol/acid molar ratio was 14:1) acquired through the Box-BEHNKEN response surface methodology, a high oleic acid conversion of 98.42% could be obtained over the optimal PIL, PEI(70000)-PS-p-TSA. Additionally, our PILs also showed high generality for esterification of other FFAs, with general high conversion over 90% noted in each case even under much milder reaction conditions compared to other conventional catalysts.

Key words: Catalyst, Ionic liquids, Biodiesel, Poly (ethylene imine), Esterification