Quality Based Prioritized Sensor Fault Monitoring Methodology

›› 2008, Vol. 16 ›› Issue (4): 584-589.

Quality Based Prioritized Sensor Fault Monitoring Methodology

宋凯¹, 王海清², 李平², 冯志刚³

1. School of Chemical Engineering and Technology, Tianjin University, Tianjin 300072, China;
2. Institute of Industrial Process Control, Zhejiang University, Hangzhou 310027, China;
3. Hebei Zhongrun Pharmaceutical Co., Ltd., Shijiazhuang 050041, China

收稿日期:2007-07-28 修回日期:2008-03-25 出版日期:2008-08-28 发布日期:2008-08-28
通讯作者: WANG Haiqing, E-mail: hqwang@iipc.zju.edu.cn
基金资助:
the National Natural Science Foundation of China(20776128);the Natural Science Foundation of Zhejiang Province(Y107032)

Quality Based Prioritized Sensor Fault Monitoring Methodology

SONG Kai¹, WANG Haiqing², LI Ping², FENG Zhigang³

1. School of Chemical Engineering and Technology, Tianjin University, Tianjin 300072, China;
2. Institute of Industrial Process Control, Zhejiang University, Hangzhou 310027, China;
3. Hebei Zhongrun Pharmaceutical Co., Ltd., Shijiazhuang 050041, China

Received:2007-07-28 Revised:2008-03-25 Online:2008-08-28 Published:2008-08-28
Supported by:
the National Natural Science Foundation of China(20776128);the Natural Science Foundation of Zhejiang Province(Y107032)

摘要/Abstract

摘要： To improve the detection and identification performance of the Statistical Quality Monitoring (SQM) system, a novel quality based Prioritized Sensor-Fault Detection (PSFD) methodology is proposed. Weighted by the V_p (variable importance in projection) index, which indicates the importance of the sensor variables to the quality variables, the new monitoring statistic, Q_v, is developed to ensure that the most vital sensor faults be detected successfully. Subsequently, the ratio between the Detectable Minimum Faulty Magnitude (DMFM) of the most important sensor and of the least important sensor is only V_pmin/V_pmax<<1. The Structured Residuals are designed according to the V_p index to identify and then isolate them. The theoretical findings are fully supported by simulation studies performed on the Tennessee Eastman process.

关键词: partial least squares, statistical quality monitoring, Tennessee Eastman process

Abstract: To improve the detection and identification performance of the Statistical Quality Monitoring (SQM) system, a novel quality based Prioritized Sensor-Fault Detection (PSFD) methodology is proposed. Weighted by the V_p (variable importance in projection) index, which indicates the importance of the sensor variables to the quality variables, the new monitoring statistic, Q_v, is developed to ensure that the most vital sensor faults be detected successfully. Subsequently, the ratio between the Detectable Minimum Faulty Magnitude (DMFM) of the most important sensor and of the least important sensor is only V_pmin/V_pmax<<1. The Structured Residuals are designed according to the V_p index to identify and then isolate them. The theoretical findings are fully supported by simulation studies performed on the Tennessee Eastman process.

Key words: partial least squares, statistical quality monitoring, Tennessee Eastman process

宋凯, 王海清, 李平, 冯志刚. Quality Based Prioritized Sensor Fault Monitoring Methodology[J]. , 2008, 16(4): 584-589.

SONG Kai, WANG Haiqing, LI Ping, FENG Zhigang. Quality Based Prioritized Sensor Fault Monitoring Methodology[J]. , 2008, 16(4): 584-589.

参考文献

1 Venkatasubramanian, V., Rengaswamy, R., Kavuri, S.N., Yin, K., “A review of process fault detection and diagnosis (I) Quantitative model-based methods”, Comp. Chem. Eng., 27, 293-311 (2003).
2 Venkatasubramanian, V., Rengaswamy, R., Kavuri, S.N., Yin, K., “A review of process fault detection and diagnosis (II) Qualitative models and search strategies”, Comp. Chem. Eng., 27, 313-326 (2003).
3 Venkatasubramanian, V., Rengaswamy, R., Kavuri, S.N., Yin, K., “A review of process fault detection and diagnosis (Ⅲ) Process history based methods”, Comp. Chem. Eng., 27, 327-346 (2003).
4 MacGregor, J.F., “Using online process data to improve quality: Challenges for statisticians”, Int. Stat. Rev., 21, 875-890 (1997).
5 Gertler, J., Li, W., Huang, Y., McAvoy, T., “Isolation enhanced principal component analysis”, AIChE J., 45 (2), 323-334 (1999).
6 Song, K., Wang, H., Li., P., “VPLS based quality and cost control for Tennessee Eastman process”, Chin. J. Chem. Eng., 1, 61-66 (2005).
7 Wang, H., Song, Z., Wang, H., “Statistical process monitoring using improved PCA with optimized sensor locations”, Journal of Process Control, 12, 735-744 (2002).
8 Downs, J.J., Vogel, E.F., “A plant-wide industrial process control problem”, Comp. Chem. Eng., 17 (3), 245-255 (1993).
9 Wold, S., Sjostrom, M., Eriksson, L., “PLS-regression: A basic tool of chemometrics”, Chemometrics and Intelligent Laboratory Systems, 58, 109-130 (2001).
10 Hoskuldsson, A., “PLS regression methods”, J. Chemometrics, 2,211-228 (1988).
11 Song, K., Wang, H., Li, P., “Discounted-measurement RPLS algorithm and its application to quality control of the rubber mixing process”, Journal of Chemical Industry and Engineering, 6, 942-946 (2004). (in Chinese).
12 Qin, S.J., Li, W., “Detection, identification, and reconstruction of faulty sensors with maximized sensitivity”, AIChE J., 45 (9),1963-1976 (1999).
13 Dunia, R., Qin, S.J., “Subspace approach to multidimensional fault identification and reconstruction”, AIChE J., 44 (8), 1813-1831 (1998).
14 Gertler, J., Cao, J., “PCA-based fault diagnosis in the presence of control and dynamics”, AIChE J., 50 (2), 388-402 (2004).
15 Lyman, P.R., Georgakist, C., “Plant-wide control of the Tennessee Eastman problem”, Comp. Chem. Eng., 19, 321-331 (1995).

[1]	Shijin Ren, Zhihuan Song, Maoyun Yang, Jianguo Ren . A novel multimode processmonitoring method integrating LCGMMwith modified LFDA[J]. Chinese Journal of Chemical Engineering, 2015, 23(12): 1970-1980.
[2]	Huihui Gao, Yuan Xu, Xiangbai Gu, Xiaoyong Lin, Qunxiong Zhu. Systematic rationalization approach for multivariate correlated alarms based on interpretive structural modeling and Likert scale[J]. Chinese Journal of Chemical Engineering, 2015, 23(12): 1987-1996.
[3]	Jian Tang, Tianyou Chai, Zhuo Liu, Wen Yu. Selective ensemble modeling based on nonlinear frequency spectral feature extraction for predicting load parameter in ball mills[J]. Chinese Journal of Chemical Engineering, 2015, 23(12): 2020-2028.
[4]	Weiming Shao, Xuemin Tian, Ping Wang. Local Partial Least Squares Based Online Soft Sensing Method for Multi-output Processes with Adaptive Process States Division[J]. , 2014, 22(7): 828-836.
[5]	Qunxiong Zhu, Yiwen Jia, Di Peng, Yuan Xu. Study and Application of Fault Prediction Methods with Improved Reservoir Neural Networks[J]. , 2014, 22(7): 812-819.
[6]	王丽, 侍洪波. Improved Kernel PLS-based Fault Detection Approach for Nonlinear Chemical Processes[J]. Chinese Journal of Chemical Engineering, 2014, 22(6): 657-663.
[7]	姜庆超, 颜学峰. Statistical Monitoring of Chemical Processes Based on Sensitive Kernel Principal Components[J]. Chinese Journal of Chemical Engineering, 2013, 21(6): 633-643.
[8]	陈心怡, 颜学峰. Fault Diagnosis in Chemical Process Based on Self-organizing Map Integrated with Fisher Discriminant Analysis[J]. Chinese Journal of Chemical Engineering, 2013, 21(4): 382-387.
[9]	彭荻, 徐圆, 朱群雄. Study and Application of Case-based Extension Fault Diagnosis for Chemical Process[J]. Chinese Journal of Chemical Engineering, 2013, 21(4): 366-375.
[10]	方慧娟, 罗继亮, 王飞. Fast Learning in Spiking Neural Networks by Learning Rate Adaptation^*[J]. Chinese Journal of Chemical Engineering, 2012, 20(6): 1219-1224.
[11]	赵露平, 赵春晖, 高福荣. Phase Transition Analysis Based Quality Prediction for Multi-phase Batch Processes^*[J]. Chinese Journal of Chemical Engineering, 2012, 20(6): 1191-1197.
[12]	解翔, 侍洪波. Multimode Process Monitoring Based on Fuzzy C-means in Locality Preserving Projection Subspace^*[J]. Chinese Journal of Chemical Engineering, 2012, 20(6): 1174-1179.
[13]	费正顺, 胡斌, 叶鲁彬, 梁军. ARX-NNPLS Model Based Optimization Strategy and Its Application in Polymer Grade Transition Process^*[J]. Chinese Journal of Chemical Engineering, 2012, 20(5): 971-979.
[14]	叶鲁彬, 石向荣, 梁军. A Multi-level Approach for Complex Fault Isolation Based on Structured Residuals[J]. , 2011, 19(3): 462-472.
[15]	胡斌, 郑平友, 梁军. Multi-loop Internal Model Controller Design Based on a Dynamic PLS Framework[J]. , 2010, 18(2): 277-285.

Quality Based Prioritized Sensor Fault Monitoring Methodology

Quality Based Prioritized Sensor Fault Monitoring Methodology

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价