Multicomponent synthesis and designing of tetrasubstituted imidazole compounds catalyzed via ionic-liquid for acid steel corrosion protection: Experimental exploration and theoretical calculations

doi:10.1016/j.cjche.2022.05.025

中国化学工程学报 ›› 2023, Vol. 55 ›› Issue (3): 304-319.DOI: 10.1016/j.cjche.2022.05.025

• Full Length Article • 上一篇

Multicomponent synthesis and designing of tetrasubstituted imidazole compounds catalyzed via ionic-liquid for acid steel corrosion protection: Experimental exploration and theoretical calculations

Hany M. Abd El-Lateef^1,2, Mai M. Khalaf^1,2, K. Shalabi³, Antar A. Abdelhamid^2,4

1. Department of Chemistry, College of Science, King Faisal University, Al-Ahsa 31982, Saudi Arabia;
2. Department of Chemistry, Faculty of Science, Sohag University, Sohag 82524, Egypt;
3. Chemistry Department, Faculty of Science, Mansoura University, Mansoura, Egypt;
4. Chemistry Department, Faculty of Science, Albaha University, Albaha 1988, Saudi Arabia

收稿日期:2021-12-12 修回日期:2022-05-17 出版日期:2023-03-28 发布日期:2023-06-03
通讯作者: Hany M. Abd El-Lateef,E-mail:hmahmed@kfu.edu.sa,hany_shubra@science.sohag.edu.eg;K. Shalabi,E-mail:dr-kamal@mans.edu.eg
基金资助:
This work was supported through the Annual Funding track by the Deanship of Scientific Research, Vice Presidency for Graduate Studies and Scientific Research, King Faisal University, Saudi Arabia [GRANT-415].

Multicomponent synthesis and designing of tetrasubstituted imidazole compounds catalyzed via ionic-liquid for acid steel corrosion protection: Experimental exploration and theoretical calculations

Hany M. Abd El-Lateef^1,2, Mai M. Khalaf^1,2, K. Shalabi³, Antar A. Abdelhamid^2,4

1. Department of Chemistry, College of Science, King Faisal University, Al-Ahsa 31982, Saudi Arabia;
2. Department of Chemistry, Faculty of Science, Sohag University, Sohag 82524, Egypt;
3. Chemistry Department, Faculty of Science, Mansoura University, Mansoura, Egypt;
4. Chemistry Department, Faculty of Science, Albaha University, Albaha 1988, Saudi Arabia

Received:2021-12-12 Revised:2022-05-17 Online:2023-03-28 Published:2023-06-03
Contact: Hany M. Abd El-Lateef,E-mail:hmahmed@kfu.edu.sa,hany_shubra@science.sohag.edu.eg;K. Shalabi,E-mail:dr-kamal@mans.edu.eg
Supported by:
This work was supported through the Annual Funding track by the Deanship of Scientific Research, Vice Presidency for Graduate Studies and Scientific Research, King Faisal University, Saudi Arabia [GRANT-415].

摘要/Abstract

摘要： Five new tetrasubstituted imidazoles were designed with outstanding yields (83%-92%) in the occurrence of ionic liquid-based-pyridinium as a catalyst. The constructions of all synthesized derivatives were established by spectral tools and their purities were verified using thin-layer chromatography (TLC), displaying single-spot. The performance of corrosion protection of the prepared imidazole derivatives was examined theoretically and practically for acid steel corrosion. The experimental study was conducted by electrochemical (electrochemical impedance spectroscopy (EIS) and Tafel polarization (PPS)) tools. The findings from the used approaches concluded that the synthesized compounds were well-organized inhibitors with an efficiency of 90.7%-98.5% at 50 ℃ and 0.7 mmol·L^-1. The Tafel polarization results indicate the protective action of the additives was under mixed-monitoring. The additive adsorption on the electrode interface performed as a distinguished aspect for protection. The surface exploration on the blank and protected metal was completed by field emission scanning electron microscopy (FE-SEM). Computational studies by Monte Carlo (MC) simulation and quantum chemical calculation (DFT) were related to practical findings. The corrosion protection adsorption mechanism was reinforced by the preferable fitted Langmuir isotherm model. All findings from the applied-inspected approaches alternately confirm each other.

关键词: Adsorption, Ionic-liquid catalyst, Tetrasubstituted imidazoles, Corrosion, Pickling acid, Mathematical modeling

Abstract: Five new tetrasubstituted imidazoles were designed with outstanding yields (83%-92%) in the occurrence of ionic liquid-based-pyridinium as a catalyst. The constructions of all synthesized derivatives were established by spectral tools and their purities were verified using thin-layer chromatography (TLC), displaying single-spot. The performance of corrosion protection of the prepared imidazole derivatives was examined theoretically and practically for acid steel corrosion. The experimental study was conducted by electrochemical (electrochemical impedance spectroscopy (EIS) and Tafel polarization (PPS)) tools. The findings from the used approaches concluded that the synthesized compounds were well-organized inhibitors with an efficiency of 90.7%-98.5% at 50 ℃ and 0.7 mmol·L^-1. The Tafel polarization results indicate the protective action of the additives was under mixed-monitoring. The additive adsorption on the electrode interface performed as a distinguished aspect for protection. The surface exploration on the blank and protected metal was completed by field emission scanning electron microscopy (FE-SEM). Computational studies by Monte Carlo (MC) simulation and quantum chemical calculation (DFT) were related to practical findings. The corrosion protection adsorption mechanism was reinforced by the preferable fitted Langmuir isotherm model. All findings from the applied-inspected approaches alternately confirm each other.

Key words: Adsorption, Ionic-liquid catalyst, Tetrasubstituted imidazoles, Corrosion, Pickling acid, Mathematical modeling

Hany M. Abd El-Lateef, Mai M. Khalaf, K. Shalabi, Antar A. Abdelhamid. Multicomponent synthesis and designing of tetrasubstituted imidazole compounds catalyzed via ionic-liquid for acid steel corrosion protection: Experimental exploration and theoretical calculations[J]. 中国化学工程学报, 2023, 55(3): 304-319.

参考文献

[1] A.K. Singh, S. Thakur, B. Pani, E.E. Ebenso, M.A. Quraishi, A.K. Pandey, 2-hydroxy-N'-((thiophene-2-yl)methylene)benzohydrazide: Ultrasound-assisted synthesis and corrosion inhibition study, ACS Omega 3 (4) (2018) 4695–4705.
[2] H.M. Abd El-Lateef, A.O. Alnajjar, Enhanced the protection capacity of poly(o-toluidine) by synergism with zinc or lanthanum additives at C-steel/HCl interface: A combined DFT, molecular dynamic simulations and experimental methods, J. Mol. Liq. 303 (2020) 112641.http://dx.doi.org/10.1016/j.molliq.2020.112641
[3] P. Shaw, I.B. Obot, M. Yadav, Functionalized 2-hydrazinobenzothiazole with carbohydrates as a corrosion inhibitor: Electrochemical, XPS, DFT and Monte Carlo simulation studies, Mater. Chem. Front. 3 (5) (2019) 931–940.
[4] H.S. Gadow, M.M. Motawea, Investigation of the corrosion inhibition of carbon steel in hydrochloric acid solution by using ginger roots extract, RSC Adv. 7 (40) (2017) 24576–24588.
[5] M. Finšgar, J. Jackson, Application of corrosion inhibitors for steels in acidic media for the oil and gas industry: A review, Corros. Sci. 86 (2014) 17–41.http://dx.doi.org/10.1016/j.corsci.2014.04.044
[6] N. Chafai, S. Chafaa, K. Benbouguerra, A. Hellal, M. Mehri, Synthesis, spectral analysis, anti-corrosive activity and theoretical study of an aromatic hydrazone derivative, J. Mol. Struct. 1181 (2019) 83–92.http://dx.doi.org/10.1016/j.molstruc.2018.12.073
[7] A. Singh, K.R. Ansari, D.S. Chauhan, M.A. Quraishi, H. Lgaz, I.M. Chung, Comprehensive investigation of steel corrosion inhibition at macro/micro level by ecofriendly green corrosion inhibitor in 15% HCl medium, J. Colloid Interface Sci. 560 (2020) 225–236.http://dx.doi.org/10.1016/j.jcis.2019.10.040
[8] Z. Panossian, N.L. de Almeida, R.M.F. de Sousa, G. de Souza Pimenta, L.B.S. Marques, Corrosion of carbon steel pipes and tanks by concentrated sulfuric acid: A review, Corros. Sci. 58 (2012) 1–11.http://dx.doi.org/10.1016/j.corsci.2012.01.025
[9] D.S. Chauhan, M.A. Quraishi, A.A. Sorour, S.K. Saha, P. Banerjee, Triazole-modified chitosan: A biomacromolecule as a new environmentally benign corrosion inhibitor for carbon steel in a hydrochloric acid solution, RSC Adv. 9 (26) (2019) 14990–15003.
[10] I.B. Onyeachu, D.S. Chauhan, K.R. Ansari, I.B. Obot, M.A. Quraishi, A.H. Alamri, Hexamethylene-1, 6-bis(N-d-glucopyranosylamine) as a novel corrosion inhibitor for oil and gas industry: Electrochemical and computational analysis, New J. Chem. 43 (19) (2019) 7282–7293.
[11] R. Sadeghi Erami, M. Amirnasr, S. Meghdadi, M. Talebian, H. Farrokhpour, K. Raeissi, Carboxamide derivatives as new corrosion inhibitors for mild steel protection in hydrochloric acid solution, Corros. Sci. 151 (2019) 190–197.http://dx.doi.org/10.1016/j.corsci.2019.02.019
[12] B. Wang, M. Du, J. Zhang, C.J. Gao, Electrochemical and surface analysis studies on corrosion inhibition of Q235 steel by imidazoline derivative against CO₂ corrosion, Corros. Sci. 53 (1) (2011) 353–361.http://dx.doi.org/10.1016/j.corsci.2010.09.042
[13] I. Jevremović, M. Singer, M. Achour, D. Blumer, T. Baugh, V. Misković-Stanković, S. Nesić, A novel method to mitigate the top-of-the-line corrosion in wet gas pipelines by corrosion inhibitor within a foam matrix, Corrosion 69 (2) (2013) 186–192.
[14] S.H. Yoo, Y.W. Kim, K. Chung, S.Y. Baik, J.S. Kim, Synthesis and corrosion inhibition behavior of imidazoline derivatives based on vegetable oil, Corros. Sci. 59 (2012) 42–54.http://dx.doi.org/10.1016/j.corsci.2012.02.011
[15] W.H. Durnie, B.J. Kinsella, R. de Marco, A. Jefferson, A study of the adsorption properties of commercial carbon dioxide corrosion inhibitor formulations, J. Appl. Electrochem. 31 (2001) 1221–1226.
[16] L. K T, V.S. Thimmakondu, N. S, N. R, Corrosion inhibitive evaluation and DFT studies of 2-(Furan-2-yl)-4, 5-diphenyl-1H-imidazole on mild steel at 1.0M HCl, J. Indian Chem. Soc. 98 (9) (2021) 100121.http://dx.doi.org/10.1016/j.jics.2021.100121
[17] A.S. Fouda, M.A. Ismail, G.Y. EL-ewady, A.S. Abousalem, Evaluation of 4-amidinophenyl-2, 2'-bithiophene and its aza-analogue as novel corrosion inhibitors for CS in acidic media: Experimental and theoretical study, J. Mol. Liq. 240 (2017) 372–388.http://dx.doi.org/10.1016/j.molliq.2017.05.089
[18] C. Verma, E.E. Ebenso, M.A. Quraishi, Ionic liquids as green and sustainable corrosion inhibitors for metals and alloys: An overview, J. Mol. Liq. 233 (2017) 403–414.http://dx.doi.org/10.1016/j.molliq.2017.02.111
[19] A. Mishra, J. Aslam, C. Verma, M.A. Quraishi, E.E. Ebenso, Imidazoles as highly effective heterocyclic corrosion inhibitors for metals and alloys in aqueous electrolytes: A review, J. Taiwan Inst. Chem. Eng. 114 (2020) 341–358.http://dx.doi.org/10.1016/j.jtice.2020.08.034
[20] M.A. Quraishi, D.S. Chauhan, V.S. Saji, Heterocyclic biomolecules as green corrosion inhibitors, J. Mol. Liq. 341 (2021) 117265.http://dx.doi.org/10.1016/j.molliq.2021.117265
[21] A. Suhasaria, M. Murmu, S. Satpati, P. Banerjee, D. Sukul, Bis-benzothiazoles as efficient corrosion inhibitors for mild steel in aqueous HCl: Molecular structure-reactivity correlation study, J. Mol. Liq. 313 (2020) 113537.http://dx.doi.org/10.1016/j.molliq.2020.113537
[22] C. Verma, L.O. Olasunkanmi, E.E. Ebenso, M.A. Quraishi, Substituents effect on corrosion inhibition performance of organic compounds in aggressive ionic solutions: A review, J. Mol. Liq. 251 (2018) 100–118.http://dx.doi.org/10.1016/j.molliq.2017.12.055
[23] L. Guo, I.B. Obot, X.W. Zheng, X. Shen, Y.J. Qiang, S. Kaya, C. Kaya, Theoretical insight into an empirical rule about organic corrosion inhibitors containing nitrogen, oxygen, and sulfur atoms, Appl. Surf. Sci. 406 (2017) 301–306.http://dx.doi.org/10.1016/j.apsusc.2017.02.134
[24] H.M. Abd El-Lateef, A.R. Sayed, K. Shalabi, Synthesis and theoretical studies of novel conjugated polyazomethines and their application as efficient inhibitors for C1018 steel pickling corrosion behavior, Surf. Interfaces 23 (2021) 101037.
[25] H.M.A. El-Lateef, Z.A. Abdallah, M.S.M. Ahmed, Solvent-free synthesis and corrosion inhibition performance of Ethyl 2-(1, 2, 3, 6-tetrahydro-6-oxo-2-thioxopyrimidin-4-yl)ethanoate on carbon steel in pickling acids: Experimental, quantum chemical and Monte Carlo simulation studies, J. Mol. Liq. 296 (2019) 111800.
[26] R.G. Pearson, Absolute electronegativity and hardness: Application to inorganic chemistry, Inorg. Chem. 27 (4) (1988) 734–740.
[27] M. Abdallah, E.A.M. Gad, M. Sobhi, J.H. Al-Fahemi, M.M. Alfakeer, Performance of tramadol drug as a safe inhibitor for aluminum corrosion in 1.0 M HCl solution and understanding mechanism of inhibition using DFT, Egypt. J. Petroleum 28 (2) (2019) 173–181.
[28] Y.Y. Feng, S.H. Chen, W.J. Guo, Y.X. Zhang, G.Z. Liu, Inhibition of iron corrosion by 5, 10, 15, 20-tetraphenylporphyrin and 5, 10, 15, 20-tetra-(4-chlorophenyl)porphyrin adlayers in 0.5 M H₂SO₄ solutions, J. Electroanal. Chem. 602 (1) (2007) 115–122.
[29] S.S. Pujari, S.A. Kadam, Y.R. Ma, S.A. Khalate, P.K. Katkar, S.J. Marje, U.M. Patil, Highly sensitive hydrothermally prepared nickel phosphate electrocatalyst as non-enzymatic glucose sensing electrode, J. Porous Mater. 28 (2) (2021) 369–381.
[30] Q. Zhang, Z.N. Gao, F. Xu, S.X. Tai, X.G. Liu, S.B. Mo, F. Niu, Surface tension and aggregation properties of novel cationic gemini surfactants with diethylammonium headgroups and a diamido spacer, Langmuir 28 (33) (2012) 11979–11987.
[31] B. Cai, J.F. Dong, L. Cheng, Z. Jiang, Y. Yang, X.F. Li, Adsorption and micellization of gemini surfactants with pyrrolidinium head groups: Effect of the spacer length, Soft Matter 9 (31) (2013) 7637.
[32] D.K. Singh, S. Kumar, G. Udayabhanu, R.P. John, 4(N, N-dimethylamino) benzaldehyde nicotinic hydrazone as corrosion inhibitor for mild steel in 1 M HCl solution: An experimental and theoretical study, J. Mol. Liq. 216 (2016) 738–746.
[33] M. Benabdellah, R. Touzani, A. Aouniti, A. Dafali, S.E. Kadiri, B. Hammouti, M. Benkaddour, Inhibitive action of some bipyrazolic compounds on the corrosion of steel in 1 mol·L-1 HCl: Part I: Electrochemical study, Mater. Chem. Phys. 105 (2–3) (2007) 373–379.
[34] A.H. Tantawy, K.A. Soliman, H.M. Abd El-Lateef, Experimental and computational approaches of sustainable quaternary bisammonium fluorosurfactants for corrosion inhibition as protective films at mild steel/H₂SO₄ interface, Colloids Surf. A Physicochem. Eng. Aspects 614 (2021) 126141.
[35] X.H. Wang, A.L. Huang, D.Q. Lin, M. Talha, H. Liu, Y.H. Lin, Imidazolium-based ionic liquid as efficient corrosion inhibitor for AA 6061 alloy in HCl solution, Materials (Basel) 13 (20) (2020) 4672.
[36] K.F. Khaled, M.M. Al-Qahtani, The inhibitive effect of some tetrazole derivatives towards Al corrosion in acid solution: Chemical, electrochemical and theoretical studies, Mater. Chem. Phys. 113 (1) (2009) 150–158.
[37] X.K. He, Y.M. Jiang, C. Li, W.C. Wang, B.L. Hou, L.Y. Wu, Inhibition properties and adsorption behavior of imidazole and 2-phenyl-2-imidazoline on AA5052 in 1.0 M HCl solution, Corros. Sci. 83 (2014) 124–136.
[38] P. Rodič, I. Milošev, M. Lekka, F. Andreatta, L. Fedrizzi, Corrosion behaviour and chemical stability of transparent hybrid Sol-gel coatings deposited on aluminium in acidic and alkaline solutions, Prog. Org. Coat. 124 (2018) 286–295.
[39] S.D. Deng, X.H. Li, Inhibition by Jasminum nudiflorum Lindl. leaves extract of the corrosion of aluminium in HCl solution, Corros. Sci. 64 (2012) 253–262.
[40] M.M. Fares, A.K. Maayta, M.M. Al-Qudah, Pectin as promising green corrosion inhibitor of aluminum in hydrochloric acid solution, Corros. Sci. 60 (2012) 112–117.
[41] A.O. Alnajjar, H.M. Abd El-Lateef, M.M. Khalaf, I.M.A. Mohamed, Steel protection in acidified 3.5% NaCl by novel hybrid composite of CoCrO₃/polyaniline: Chemical fabrication, physicochemical properties, and corrosion inhibition performance, Constr. Build. Mater. 317 (2022) 125918.
[42] K.R. Ansari, M.A. Quraishi, A. Singh, S. Ramkumar, I.B. Obote, Corrosion inhibition of N80 steel in 15% HCl by pyrazolone derivatives: Electrochemical, surface and quantum chemical studies, RSC Adv. 6 (29) (2016) 24130–24141.
[43] M.M. Khalaf, A.H. Tantawy, K.A. Soliman, H.M. Abd El-Lateef, Cationic gemini-surfactants based on waste cooking oil as new ‘green’ inhibitors for N80-steel corrosion in sulphuric acid: A combined empirical and theoretical approaches, J. Mol. Struct. 1203 (2020) 127442.
[44] A. Singh, K.R. Ansari, M.A. Quraishi, H. Lgaz, Y.H. Lin, Synthesis and investigation of pyran derivatives as acidizing corrosion inhibitors for N80 steel in hydrochloric acid: Theoretical and experimental approaches, J. Alloys Compd. 762 (2018) 347–362.
[45] O. Dagdag, Z. Safi, R. Hsissou, H. Erramli, M. El Bouchti, N. Wazzan, L. Guo, C. Verma, E.E. Ebenso, A. El Harfi, Epoxy pre-polymers as new and effective materials for corrosion inhibition of carbon steel in acidic medium: Computational and experimental studies, Sci. Rep. 9 (2019) 11715
[46] H.M. Abd El-Lateef, I.M.A. Mohamed, J.H. Zhu, M.M. Khalaf, An efficient synthesis of electrospun TiO₂-nanofibers/Schiff base phenylalanine composite and its inhibition behavior for C-steel corrosion in acidic chloride environments, J. Taiwan Inst. Chem. Eng. 112 (2020) 306–321.
[47] J. Haque, K.R. Ansari, V. Srivastava, M.A. Quraishi, I.B. Obot, Pyrimidine derivatives as novel acidizing corrosion inhibitors for N80 steel useful for petroleum industry: A combined experimental and theoretical approach, J. Ind. Eng. Chem. 49 (2017) 176–188.
[48] F. Bentiss, M. Lebrini, M. Lagrenée, Thermodynamic characterization of metal dissolution and inhibitor adsorption processes in mild steel/2, 5-bis(n-thienyl)-1, 3, 4-thiadiazoles/hydrochloric acid system, Corros. Sci. 47 (12) (2005) 2915–2931.
[49] N.V. Likhanova, M.A. Domínguez-Aguilar, O. Olivares-Xometl, N. Nava-Entzana, E. Arce, H. Dorantes, The effect of ionic liquids with imidazolium and pyridinium cations on the corrosion inhibition of mild steel in acidic environment, Corros. Sci. 52 (6) (2010) 2088–2097.
[50] H.M. Abd El-Lateef, K. Shalabi, A.H. Tantawy, Corrosion inhibition and adsorption features of novel bioactive cationic surfactants bearing benzenesulphonamide on C1018-steel under sweet conditions: Combined modeling and experimental approaches, J. Mol. Liq. 320 (2020) 114564.
[51] N. Palaniappan, I.S. Cole, A.E. Kuznetsov, Experimental and computational studies of graphene oxide covalently functionalized by octylamine: Electrochemical stability, hydrogen evolution, and corrosion inhibition of the AZ13 Mg alloy in 3.5% NaCl, RSC Adv. 10 (19) (2020) 11426–11434.
[52] I.B. Obot, D.D. Macdonald, Z.M. Gasem, Density functional theory (DFT) as a powerful tool for designing new organic corrosion inhibitors. Part 1: An overview, Corros. Sci. 99 (2015) 1–30.
[53] I. Lukovits, E. Kálmán, F. Zucchi, Corrosion inhibitors—correlation between electronic structure and efficiency, CORROSION 57 (1) (2001) 3–8.
[54] S. Yesudass, L. Olasunkanmi, I. Bahadur, M.M. Kabanda, I.B. Obot, E. Ebenso, Experimental and theoretical studies on some selected ionic liquids with different cations/anions as corrosion inhibitors for mild steel in acidic medium, J. Taiwan Inst. Chem. Eng. 64 (2016) 252–268.
[55] H. Debab, Electrochemical and quantum chemical studies of adsorption and corrosion inhibition of two new schiff bases on carbon steel in hydrochloric acid media, Int. J. Electrochem. Sci. (2018) 6958–6977.
[56] G. Gao, C.H. Liang, Electrochemical and DFT studies of β-amino-alcohols as corrosion inhibitors for brass, Electrochimica Acta 52 (13) (2007) 4554–4559.
[57] H.M. Abd El-Lateef, K. Shalabi, A.H. Tantawy, Corrosion inhibition of carbon steel in hydrochloric acid solution using newly synthesized urea-based cationic fluorosurfactants: Experimental and computational investigations, New J. Chem. 44 (41) (2020) 17791–17814.
[58] G. Gece, S. Bilgiç, Quantum chemical study of some cyclic nitrogen compounds as corrosion inhibitors of steel in NaCl media, Corros. Sci. 51 (8) (2009) 1876–1878.
[59] L.H. Madkour, S. Kaya, I.B. Obot, Computational, Monte Carlo simulation and experimental studies of some arylazotriazoles (AATR) and their copper complexes in corrosion inhibition process, J. Mol. Liq. 260 (2018) 351–374.
[60] H.M.A. El-Lateef, S. Shaaban, K. Shalabi, M.M. Khalaf, Novel organoselenium-based N-mealanilic acids as efficacious corrosion inhibitors for 6061 aluminum alloy in molar HCl: In-silico modeling, electrochemical, and surface morphology studies, J. Taiwan Inst. Chem. Eng. 133 (2022) 104258.
[61] H.M. Abd El-Lateef, K. Shalabi, A.R. Sayed, S.M. Gomha, E.M. Bakir, The novel polythiadiazole polymer and its composite with α-Al(OH)3 as inhibitors for steel alloy corrosion in molar H₂SO₄: Experimental and computational evaluations, J. Ind. Eng. Chem. 105 (2022) 238–250.
[62] H. M. Abd El-Lateef, H. S. El-Beltagi, M. E. M. Mohamed, M. Kandeel, E. Bakir, A. Toghan. K. Shalabi, A. H. Tantawy, M. M. Khalaf, Novel natural surfactant-based fatty acids and their corrosion-inhibitive characteristics for carbon steel-induced sweet corrosion: detailed practical and computational explorations, Front. Mater. 9 (2022) 843438.
[63] A. Ghanbari, M.M. Attar, M. Mahdavian, Corrosion inhibition performance of three imidazole derivatives on mild steel in 1 M phosphoric acid, Mater. Chem. Phys. 124 (2–3) (2010) 1205–1209.
[64] M. Ouakki, M. Galai, M. Rbaa, A.S. Abousalem, B. Lakhrissi, E.H. Rifi, M. Cherkaoui, Quantum chemical and experimental evaluation of the inhibitory action of two imidazole derivatives on mild steel corrosion in sulphuric acid medium, Heliyon 5 (11) (2019) e02759.
[65] M. Yadav, S. Kumar, D. Sharma, P.N. Yadav, Experimental and quantum studies on adsorption and corrosion inhibition effect of imidazole derivatives on n80 steel in hydrochloric acid, Surf. Rev. Lett. 20 (6) (2013) 1350057.
[66] K. Chkirate, K. Azgaou, H. Elmsellem, B. El Ibrahimi, N.K. Sebbar, E.H. Anouar, M. Benmessaoud, S. El Hajjaji, E.M. Essassi, Corrosion inhibition potential of 2-[(5-methylpyrazol-3-yl)methyl]benzimidazole against carbon steel corrosion in 1 M HCl solution: Combining experimental and theoretical studies, J. Mol. Liq. 321 (2021) 114750.
[67] H.L. Zhu, X.J. Chen, X.F. Li, J.B. Wang, Z.Y. Hu, X.M. Ma, 2-aminobenzimidazole derivative with surface activity as corrosion inhibitor of carbon steel in HCl: Experimental and theoretical study, J. Mol. Liq. 297 (2020) 111720.

Multicomponent synthesis and designing of tetrasubstituted imidazole compounds catalyzed via ionic-liquid for acid steel corrosion protection: Experimental exploration and theoretical calculations

Multicomponent synthesis and designing of tetrasubstituted imidazole compounds catalyzed via ionic-liquid for acid steel corrosion protection: Experimental exploration and theoretical calculations

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	Yingli Li, Zhishuncheng Li, Guangfei Qu, Rui Li, Shuaiyu Liang, Junhong Zhou, Wei Ji, Huiming Tang. Mechanism, behaviour and application of iron nitrate modified carbon nanotube composites for the adsorption of arsenic in aqueous solutions[J]. 中国化学工程学报, 2023, 60(8): 26-36.
[2]	Jing Huang, Honghui Cai, Qian Zhao, Yunpeng Zhou, Haibo Liu, Jing Wang. Dual-functional pyrene implemented mesoporous silicon material used for the detection and adsorption of metal ions[J]. 中国化学工程学报, 2023, 60(8): 108-117.
[3]	Lingli Chen, Yueting Shi, Sijun Xu, Junle Xiong, Fang Gao, Shengtao Zhang, Hongru Li. Enhanced adsorption of target branched compounds including antibiotic norfloxacin frameworks on mild steel surface for efficient protection: An experimental and molecular modelling study[J]. 中国化学工程学报, 2023, 60(8): 212-227.
[4]	Hammad Saulat, Jianhua Yang, Tao Yan, Waseem Raza, Wensen Song, Gaohong He. Tungsten incorporated mobil-type eleven zeolite membranes: Facile synthesis and tuneable wettability for highly efficient separation of oil/water mixtures[J]. 中国化学工程学报, 2023, 60(8): 242-252.
[5]	Jindong Dai, Chi Zhai, Jiali Ai, Guangren Yu, Haichao Lv, Wei Sun, Yongzhong Liu. A cellular automata framework for porous electrode reconstruction and reaction-diffusion simulation[J]. 中国化学工程学报, 2023, 60(8): 262-274.
[6]	Alexander Nti Kani, Evans Dovi, Aaron Albert Aryee, Runping Han, Zhaohui Li, Lingbo Qu. Mechanisms and reusability potentials of zirconium-polyaziridine-engineered tiger nut residue towards anionic pollutants[J]. 中国化学工程学报, 2023, 60(8): 275-292.
[7]	Yuan Liu, Hanting Xiong, Jingwen Chen, Shixia Chen, Zhenyu Zhou, Zheling Zeng, Shuguang Deng, Jun Wang. One-step ethylene separation from ternary C₂ hydrocarbon mixture with a robust zirconium metal-organic framework[J]. 中国化学工程学报, 2023, 59(7): 9-15.
[8]	Hui Jiang, Zijian Zhao, Ning Yu, Yi Qin, Zhengwei Luo, Wenhua Geng, Jianliang Zhu. Synthesis, characterization, and performance comparison of boron using adsorbents based on N-methyl-D-glucosamine[J]. 中国化学工程学报, 2023, 59(7): 16-31.
[9]	Minjie Shi, Nianting Chen, Yue Zhao, Cheng Yang, Chao Yan. Facile wet-chemical fabrication of bi-functional coordination polymer nanosheets for high-performance energy storage and anti-corrosion engineering[J]. 中国化学工程学报, 2023, 59(7): 118-127.
[10]	Runze Chen, Yuran Chen, Xuemin Liang, Yapeng Kong, Yangyang Fan, Quan Liu, Zhenyu Yang, Feiying Tang, Johnny Muya Chabu, Maru Dessie Walle, Liqiang Wang. Oxidative exfoliation of spent cathode carbon: A two-in-one strategy for its decontamination and high-valued application[J]. 中国化学工程学报, 2023, 59(7): 262-269.
[11]	Shanghong Ma, Haitao Zhang, Jianbo Qu, Xiuzhong Zhu, Qingfei Hu, Jianyong Wang, Peng Ye, Futao Sai, Shiwei Chen. Preparation of waterborne polyurethane/β-cyclodextrin composite nanosponge by ion condensation method and its application in removing of dyes from wastewater[J]. 中国化学工程学报, 2023, 58(6): 124-136.
[12]	Danlei Chen, Yiqing Luo, Xigang Yuan. Cascade refrigeration system synthesis based on hybrid simulated annealing and particle swarm optimization algorithm[J]. 中国化学工程学报, 2023, 58(6): 244-255.
[13]	Yueting Shi, Junhai Zhao, Lingli Chen, Hongru Li, Shengtao Zhang, Fang Gao. Double open mouse-like terpyridine parts based amphiphilic ionic molecules displaying strengthened chemical adsorption for anticorrosion of copper in sulfuric acid solution[J]. 中国化学工程学报, 2023, 57(5): 233-246.
[14]	Jian Wang, Yuanhui Shen, Donghui Zhang, Zhongli Tang, Wenbin Li. Integrated vacuum pressure swing adsorption and Rectisol process for CO₂ capture from underground coal gasification syngas[J]. 中国化学工程学报, 2023, 57(5): 265-279.
[15]	Yujia Cui, Zhiqiang Tan, Yanan Wang, Shuxian Shi, Xiaonong Chen. One-step crosslinking preparation of tannic acid particles for the adsorption and separation of cationic dyes[J]. 中国化学工程学报, 2023, 57(5): 309-318.