Dual-functional pyrene implemented mesoporous silicon material used for the detection and adsorption of metal ions

doi:10.1016/j.cjche.2023.01.014

摘要/Abstract

摘要： A fluorescent active organic-inorganic hybrid material PyN-SBA-15 was synthesized by implementing pyrene derivatives into mesoporous SBA-15 silica. PyN-SBA-15 had detection and removal functionalities toward Al³⁺, Cu²⁺, and Hg²⁺. On the one hand, PyN-SBA-15 was used as a fluorescence sensor and displayed high sensitivity toward Al³⁺, Cu²⁺, and Hg²⁺ cations (limit of detection: 8.0×10^-7, 1.1×10^-7, and 2.9×10^-6 mol·L^-1, respectively) among various analytes with “turn-off” response. On the other hand, the adsorption studies for these toxic analytes (Cu²⁺, Hg²⁺, and Al³⁺) showed that the ion removal capacity could reach up to 45, 581, and 85 mg·g^-1, respectively. Moreover, the Langmuir isotherm models were better fitted with the adsorption data, indicating that the adsorption was mono-layer adsorption. Kinetic analysis revealed that the adsorption process was well described by the pseudo-second-order kinetic model for Cu²⁺ and Hg²⁺ and pseudo-first-order kinetic model for Al³⁺. The prepared silica material could be reused in four recycles without significantly decreasing its adsorption capacity. Therefore, the PyN-SBA-15 material can serve as a promising candidate for the simultaneous rapid detection and efficient adsorption of metal ions.

关键词: Dual function, Nanomaterials, Mesoporous silica, Metal ions, Detection and adsorption

Abstract: A fluorescent active organic-inorganic hybrid material PyN-SBA-15 was synthesized by implementing pyrene derivatives into mesoporous SBA-15 silica. PyN-SBA-15 had detection and removal functionalities toward Al³⁺, Cu²⁺, and Hg²⁺. On the one hand, PyN-SBA-15 was used as a fluorescence sensor and displayed high sensitivity toward Al³⁺, Cu²⁺, and Hg²⁺ cations (limit of detection: 8.0×10^-7, 1.1×10^-7, and 2.9×10^-6 mol·L^-1, respectively) among various analytes with “turn-off” response. On the other hand, the adsorption studies for these toxic analytes (Cu²⁺, Hg²⁺, and Al³⁺) showed that the ion removal capacity could reach up to 45, 581, and 85 mg·g^-1, respectively. Moreover, the Langmuir isotherm models were better fitted with the adsorption data, indicating that the adsorption was mono-layer adsorption. Kinetic analysis revealed that the adsorption process was well described by the pseudo-second-order kinetic model for Cu²⁺ and Hg²⁺ and pseudo-first-order kinetic model for Al³⁺. The prepared silica material could be reused in four recycles without significantly decreasing its adsorption capacity. Therefore, the PyN-SBA-15 material can serve as a promising candidate for the simultaneous rapid detection and efficient adsorption of metal ions.

Key words: Dual function, Nanomaterials, Mesoporous silica, Metal ions, Detection and adsorption

Jing Huang, Honghui Cai, Qian Zhao, Yunpeng Zhou, Haibo Liu, Jing Wang. Dual-functional pyrene implemented mesoporous silicon material used for the detection and adsorption of metal ions[J]. 中国化学工程学报, 2023, 60(8): 108-117.

参考文献

[1] H.B. Wan, Q.F. Xu, P.Y. Gu, H. Li, D.Y. Chen, N.J. Li, J.H. He, J.M. Lu, AIE-based fluorescent sensors for low concentration toxic ion detection in water, J. Hazard. Mater. 403 (2021) 123656.
[2] J. Li, X.X. Wang, G.X. Zhao, C.L. Chen, Z.F. Chai, A. Alsaedi, T. Hayat, X.K. Wang, Metal-organic framework-based materials: Superior adsorbents for the capture of toxic and radioactive metal ions, Chem. Soc. Rev. 47 (7) (2018) 2322-2356.
[3] E. Da'na, Adsorption of heavy metals on functionalized-mesoporous silica: A review, Microporous Mesoporous Mater. 247 (2017) 145-157.
[4] B. Kaur, N. Kaur, S. Kumar, Colorimetric metal ion sensors—A comprehensive review of the years 2011-2016, Coord. Chem. Rev. 358 (2018) 13-69.
[5] J. Liang, H.B. Liu, J. Wang, Pyrene-based ratiometric and fluorescent sensor for selective Al³⁺ detection, Inorganica Chimica Acta 489 (2019) 61-66.
[6] ], C. Rodrigues, F.R. Lapolli, I. Padilla, A. López-Delgado, Highly efficient removal of aluminum, iron, and manganese ions using Linde type-A zeolite obtained from hazardous waste, Chemosphere 267 (2021) 128919.
[7] J. Wang, J. Liang, X. Liu, H. Xiao, F.P. Dong, Y.L. Wang, X. Shu, F.R. Huang, H.B. Liu, Thiazoline-pyrene selective and sensitive fluorescence turn-on sensor for detection of Cu²⁺, Spectrochim. Acta A 215 (2019) 260-265.
[8] J.Y. Lee, C.H. Chen, S. Cheng, H.Y. Li, Adsorption of Pb(II) and Cu(II) metal ions on functionalized large-pore mesoporous silica, Int. J. Environ. Sci. Technol. 13 (1) (2016) 65-76.
[9] L.H. Zhi, W. Zuo, F.J. Chen, B.D. Wang, 3D MoS₂ composition aerogels as chemosensors and adsorbents for colorimetric detection and high-capacity adsorption of Hg²⁺, ACS Sustain. Chem. Eng. 4 (6) (2016) 3398-3408.
[10] EPA (US Environmental Protection Agency) established the mercury (II) limit on 2 ppb, EPA-HQ-OPPT-2005-0013, 2006.
[11] X.L. Liu, R. Ma, X.X. Wang, Y. Ma, Y.P. Yang, L. Zhuang, S. Zhang, R. Jehan, J.R. Chen, X.K. Wang, Graphene oxide-based materials for efficient removal of heavy metal ions from aqueous solution: A review, Environ. Pollut. 252 (2019) 62-73.
[12] Y.X. Li, J.Z. Hou, H.P. Zhou, M.Q. Jia, S.S. Chen, H. Huang, L. Zhang, C. Yu, A fluorescence sensor array based on perylene probe monomer-excimer emission transition for the highly efficient differential sensing of metal ions and drinking waters, Sens. Actuat. B Chem. 319 (2020) 128212.
[13] A. Lealem Berhanu, Gaurav, I. Mohiuddin, A.K. Malik, J.S. Aulakh, V. Kumar, K.H. Kim, A review of the applications of Schiff bases as optical chemical sensors, Trac. Trends Anal. Chem. 116 (2019) 74-91.
[14] H. Kim, B.A. Rao, J. Jeong, S. Angupillai, J.S. Choi, J.O. Nam, C.S. Lee, Y.A. Son, A rhodamine scaffold immobilized onto mesoporous silica as a fluorescent probe for the detection of Fe(III) and applications in bio-imaging and microfluidic chips, Sens. Actuat. B Chem. 224 (2016) 404-412.
[15] W.P. Lustig, S. Mukherjee, N.D. Rudd, A.V. Desai, J. Li, S.K. Ghosh, Metal-organic frameworks: Functional luminescent and photonic materials for sensing applications, Chem. Soc. Rev. 46 (11) (2017) 3242-3285.
[16] Y.M. Guo, L.F. Zhang, S.S. Zhang, Y. Yang, X.H. Chen, M.C. Zhang, Fluorescent carbon nanoparticles for the fluorescent detection of metal ions, Biosens. Bioelectron. 63 (2015) 61-71.
[17] S.Y. Ding, M. Dong, Y.W. Wang, Y.T. Chen, H.Z. Wang, C.Y. Su, W. Wang, Thioether-based fluorescent covalent organic framework for selective detection and facile removal of mercury(II), J. Am. Chem. Soc. 138 (9) (2016) 3031-3037.
[18] C.W. Abney, J.C. Gilhula, K. Lu, W. Lin, Metal-organic framework templated inorganic sorbents for rapid and efficient extraction of heavy metals, Adv. Mater. 26 (47) (2014) 7993-7997.
[19] H.M. Wu, Y. Xiao, Y. Guo, S.J. Miao, Q.Q. Chen, Z. Chen, Functionalization of SBA-15 mesoporous materials with 2-acetylthiophene for adsorption of Cr(III) ions, Microporous Mesoporous Mater. 292 (2020) 109754.
[20] B. Aguila, Q. Sun, J.A. Perman, L.D. Earl, C.W. Abney, R. Elzein, R. Schlaf, S.Q. Ma, Efficient mercury capture using functionalized porous organic polymer, Adv. Mater. 29 (31) (2017) 1700665.
[21] M. Zhao, S. Wang, H.S. Wang, P.R. Qin, D.J. Yang, Y.Y. Sun, F.L. Kong, Application of sodium titanate nanofibers as constructed wetland fillers for efficient removal of heavy metal ions from wastewater, Environ. Pollut. 248 (2019) 938-946.
[22] N.D. Rudd, H. Wang, E.M.A. Fuentes-Fernandez, S.J. Teat, F. Chen, G. Hall, Y.J. Chabal, J. Li, Highly efficient luminescent metal-organic framework for the simultaneous detection and removal of heavy metals from water, ACS Appl. Mater. Interfaces 8 (44) (2016) 30294-30303.
[23] Z.J. Li, H.D. Xue, Y.X. Ma, Q. Zhang, Y.C. Li, M. Xie, H.L. Qi, X.D. Zheng, Dual-functionalized fluorescent cationic organic network: Highly efficient detection and removal of dichromate from water, ACS Appl. Mater. Interfaces 11 (49) (2019) 46197-46204.
[24] X.L. Li, H. Lin, Q.L. Li, J.Y. Xue, Y. Xu, L. Zhuang, Recyclable magnetic fluorescent Fe₃O₄@SiO₂ core-shell nanoparticles decorated with carbon dots for fluoride ion removal, ACS Appl. Nano Mater. 4 (3) (2021) 3062-3074.
[25] W. Al Zoubi, M.P. Kamil, S. Fatimah, N. Nashrah, Y.G. Ko, Recent advances in hybrid organic-inorganic materials with spatial architecture for state-of-the-art applications, Prog. Mater. Sci. 112 (2020) 100663.
[26] D. Zhao, J. Feng, Q. Huo, N. Melosh, G.H. Fredrickson, B.F. Chmelka, G.D. Stucky, Triblock copolymer syntheses of mesoporous silica with periodic 50 to 300 angstrom pores, Science 279 (5350) (1998) 548-552.
[27] M. Gao, J. Zeng, K. Liang, D.Y. Zhao, B. Kong, Mesoporous silica materials: Interfacial assembly of mesoporous silica-based optical heterostructures for sensing applications, Adv. Funct. Mater. 30 (9) (2020) 2070057.
[28] N. Lashgari, A. Badiei, G. Mohammadi Ziarani, A novel functionalized nanoporous SBA-15 as a selective fluorescent sensor for the detection of multianalytes (Fe³⁺ and Cr₂O₇^2-) in water, J. Phys. Chem. Solids 103 (2017) 238-248.
[29] L.Y. Zhao, J.Y. Li, D. Sui, Y. Wang, Highly selective fluorescence chemosensors based on functionalized SBA-15 for detection of Ag+ in aqueous media, Sens. Actuat. B Chem. 242 (2017) 1043-1049.
[30] E. Da’na, A. Sayari, Adsorption of copper on amine-functionalized SBA-15 prepared by co-condensation: Equilibrium properties , Chem. Eng. J. 166 (1) (2011) 445 - 453.
[31] M.R. Awual, M. Ismael, T. Yaita, S.A. El-Safty, H. Shiwaku, Y. Okamoto, S. Suzuki, Trace copper(II) ions detection and removal from water using novel ligand modified composite adsorbent, Chem. Eng. J. 222 (2013) 67-76.
[32] S. Parambadath, A. Mathew, M.J. Barnabas, S.Y. Kim, C.S. Ha, Concentration-dependant selective removal of Cr(III), Pb(II) and Zn(II) from aqueous mixtures using 5-methyl-2-thiophenecarboxaldehyde Schiff base-immobilised SBA-15, J. Sol-Gel Sci. Technol. 79 (3) (2016) 426-439.
[33] J. Wang, X.M. Zhang, H.B. Liu, D. Zhang, H.T. Nong, P.Y. Wu, P.X. Chen, D. Li, Aggregation induced emission active fluorescent sensor for the sensitive detection of Hg²⁺ based on organic-inorganic hybrid mesoporous material, Spectrochim. Acta A 227 (2020) 117585.
[34] H.B. Liu, Y.H. Liang, J. Liang, J. Wang, Q.Y. Li, Y.Y. Liu, Q.L. Li, Y.Q. Zhu, F.P. Dong, Pyrene derivative-functionalized mesoporous silica-Cu²⁺ hybrid ensemble for fluorescence “turn-on” detection of H₂S and logic gate application in aqueous media, Anal. Bioanal. Chem. 412 (4) (2020) 905-913.
[35] D.L. Li, K.G. Chai, X.D. Yao, L.Q. Zhou, K.Y. Wu, Z.H. Huang, J.T. Yan, X.Z. Qin, W. Wei, H.B. Ji, β-Cyclodextrin functionalized SBA-15 via amide linkage as a super adsorbent for rapid removal of methyl blue, J. Colloid Interface Sci. 583 (2021) 100-112.
[36] H.Z. Cui, Y.L. Li, S. Liu, J.F. Zhang, Q. Zhou, R. Zhong, M.L. Yang, X.F. Hou, Novel Pb(II) ion-imprinted materials based on bis-pyrazolyl functionalized mesoporous silica for the selective removal of Pb(II) in water samples, Microporous Mesoporous Mater. 241 (2017) 165-177.
[37] J. Huang, H.B. Liu, J. Wang, Functionalized mesoporous silica as a fluorescence sensor for selective detection of Hg²⁺ in aqueous medium, Spectrochim. Acta A 246 (2021) 118974.
[38] M. Li, X.J. Jiang, H.H. Wu, H.L. Lu, H.Y. Li, H. Xu, S.Q. Zang, T.C.W. Mak, A dual functional probe for “turn-on” fluorescence response of Pb²⁺ and colorimetric detection of Cu²⁺ based on a rhodamine derivative in aqueous media, Dalton Trans. 44 (39) (2015) 17326-17334.
[39] Z.L. Gong, F. Ge, B.X. Zhao, Novel pyrazoline-based selective fluorescent sensor for Zn²⁺ in aqueous media, Sens. Actuat. B Chem. 159 (1) (2011) 148-153.
[40] T. Anand, S.K. Ashok Kumar, S.K. Sahoo, A new Al³⁺ selective fluorescent turn-on sensor based on hydrazide-naphthalic anhydride conjugate and its application in live cells imaging, Spectrochim. Acta A 204 (2018) 105-112.