Effective desalination and anti-biofouling performance via surface immobilized MWCNTs on RO membrane

doi:10.1016/j.cjche.2022.06.027

中国化学工程学报 ›› 2023, Vol. 56 ›› Issue (4): 33-45.DOI: 10.1016/j.cjche.2022.06.027

• Full Length Article • 上一篇下一篇

Effective desalination and anti-biofouling performance via surface immobilized MWCNTs on RO membrane

Aneela Sabir^1,3, Wail Falath^1,4, Muhammad Shafiq³, Nafisa Gull³, Maria Wasim³, Karl I. Jacob^1,2

1. School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, GA, USA;
2. G.W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA, USA;
3. Institute of Polymer of Textile Engineering, University of the Punjab, Lahore 54590, Pakistan;
4. Department of Mechanical Engineering, King Fahd University of Petroleum and Minerals, Dhahran 31261, Saudi Arabia

收稿日期:2022-03-22 修回日期:2022-05-26 出版日期:2023-04-28 发布日期:2023-06-13
通讯作者: Aneela Sabir,E-mail:aneela.ipte@pu.edu.pk

Effective desalination and anti-biofouling performance via surface immobilized MWCNTs on RO membrane

Aneela Sabir^1,3, Wail Falath^1,4, Muhammad Shafiq³, Nafisa Gull³, Maria Wasim³, Karl I. Jacob^1,2

1. School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, GA, USA;
2. G.W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA, USA;
3. Institute of Polymer of Textile Engineering, University of the Punjab, Lahore 54590, Pakistan;
4. Department of Mechanical Engineering, King Fahd University of Petroleum and Minerals, Dhahran 31261, Saudi Arabia

Received:2022-03-22 Revised:2022-05-26 Online:2023-04-28 Published:2023-06-13
Contact: Aneela Sabir,E-mail:aneela.ipte@pu.edu.pk

摘要/Abstract

摘要： Desalination is considered a viable method to overcome the issue of water scarcity either from waste water or seawater. For this purpose, this study employed a facile approach to develop surface immobilized oxidized-MWCNTs (o-MWCNTs) onto crosslinked polyvinyl alcohol (PVA) membrane. Firstly, modified polysulphone substrate was synthesized on to which crosslinked PVA layer was spread onto it. PVA layer act as active layer for surface immobilization of o-MWCNTs in varying concentration. The functional group analysis, morphology and roughness of membranes surface was conducted out using FTIR, SEM and AFM respectively. The results showed that modified membranes, immobilized o-MWCNTs enhanced the salt rejection (Na₂SO₄) upto 99.8%. After contacting with Escherichia coli and Staphylococcus aureus for 2.5 h the bacteria mortalities of the fabricated membrane could reach 96.9%. Furthermore, the anti-biofouling tests showed that OP-MWCNTs (1–5) modified membranes have higher anti-biofouling property than the control membrane.

关键词: Surface immobilized, Reverse osmosis, Multi walled carbon nanotubes, Nanomaterials

Abstract: Desalination is considered a viable method to overcome the issue of water scarcity either from waste water or seawater. For this purpose, this study employed a facile approach to develop surface immobilized oxidized-MWCNTs (o-MWCNTs) onto crosslinked polyvinyl alcohol (PVA) membrane. Firstly, modified polysulphone substrate was synthesized on to which crosslinked PVA layer was spread onto it. PVA layer act as active layer for surface immobilization of o-MWCNTs in varying concentration. The functional group analysis, morphology and roughness of membranes surface was conducted out using FTIR, SEM and AFM respectively. The results showed that modified membranes, immobilized o-MWCNTs enhanced the salt rejection (Na₂SO₄) upto 99.8%. After contacting with Escherichia coli and Staphylococcus aureus for 2.5 h the bacteria mortalities of the fabricated membrane could reach 96.9%. Furthermore, the anti-biofouling tests showed that OP-MWCNTs (1–5) modified membranes have higher anti-biofouling property than the control membrane.

Key words: Surface immobilized, Reverse osmosis, Multi walled carbon nanotubes, Nanomaterials

Aneela Sabir, Wail Falath, Muhammad Shafiq, Nafisa Gull, Maria Wasim, Karl I. Jacob. Effective desalination and anti-biofouling performance via surface immobilized MWCNTs on RO membrane[J]. 中国化学工程学报, 2023, 56(4): 33-45.

参考文献

[1] M. Elimelech, W.A. Phillip, The future of seawater desalination: Energy, technology, and the environment, Science 333 (6043) (2011) 712–717.
[2] G.D. Kang, Y.M. Cao, Development of antifouling reverse osmosis membranes for water treatment: A review, Water Res. 46 (3) (2012) 584–600.
[3] M. Wasim, A. Sabir, M. Shafiq, A. Islam, M. Azam, T. Jamil, Mixed matrix membranes: Two step process modified with electrospun (carboxy methylcellulose sodium salt/sepiolite) fibers for nanofiltration, J. Ind. Eng. Chem. 50 (2017) 172–182.
[4] L.F. Greenlee, D.F. Lawler, B.D. Freeman, B. Marrot, P. Moulin, Reverse osmosis desalination: Water sources, technology, and today's challenges, Water Res. 43 (9) (2009) 2317–2348.
[5] D. Larcher, J.M. Tarascon, Towards greener and more sustainable batteries for electrical energy storage, Nat. Chem. 7 (1) (2015) 19–29.
[6] N. Prihasto, Q.F. Liu, S.H. Kim, Pre-treatment strategies for seawater desalination by reverse osmosis system, Desalination 249 (1) (2009) 308–316.
[7] J. Mansouri, S. Harrisson, V. Chen, Strategies for controlling biofouling in membrane filtration systems: Challenges and opportunities, J. Mater. Chem. 20 (22) (2010) 4567.
[8] M. Wasim, A. Sabir, M. Shafiq, A. Islam, T. Jamil, Preparation and characterization of composite membrane via layer by layer assembly for desalination, Appl. Surf. Sci. 396 (2017) 259–268.
[9] X.L. Zhang, J.J. Jiang, F. Yuan, W. Song, J. Li, D.Y. Xing, L. Zhao, W.Y. Dong, X.H. Pan, X.L. Gao, Estimation of water footprint in seawater desalination with reverse osmosis process, Environ. Res. 204 (Pt D) (2022) 112374.
[10] A. Sabir, A. Islam, M. Shafiq, A. Shafeeq, M.T.Z. Butt, N.M. Ahmad, K. Sanaullah, T. Jamil, Novel polymer matrix composite membrane doped with fumed silica particles for reverse osmosis desalination, Desalination 368 (2015) 159–170.
[11] S. Asim, M. Wasim, A. Sabir, M. Shafiq, H. Andlib, S. Khuram, A. Ahmad, T. Jamil, The effect of Nanocrystalline cellulose/Gum Arabic conjugates in crosslinked membrane for antibacterial, chlorine resistance and boron removal performance, J. Hazard. Mater. 343 (2018) 68–77.
[12] D. Yong Lee, M.H. Lee, K.J. Kim, S. Heo, B.Y. Kim, S.J. Lee, Effect of multiwalled carbon nanotube (M-CNT) loading on M-CNT distribution behavior and the related electromechanical properties of the M-CNT dispersed ionomeric nanocomposites, Surf. Coat. Technol. 200 (5–6) (2005) 1920–1925.
[13] D. Saeki, S.Y. Nagao, I. Sawada, Y. Ohmukai, T. Maruyama, H. Matsuyama, Development of antibacterial polyamide reverse osmosis membrane modified with a covalently immobilized enzyme, J. Membr. Sci. 428 (2013) 403–409.
[14] A. Tayefeh, S.A. Mousavi, M. Wiesner, R. Poursalehi, Synthesis and surface characterization of magnetite-titania nanoparticles/polyamide nanocomposite smart RO membrane, Procedia Mater. Sci. 11 (2015) 342–346.
[15] L.Y. Jiang, Y. Wang, T.S. Chung, X.Y. Qiao, J.Y. Lai, Polyimides membranes for pervaporation and biofuels separation, Prog. Polym. Sci. 34 (11) (2009) 1135–1160.
[16] M. Wasim, M. Shafiq, R.U. Khan, A. Sabir, Crosslinked integrally skinned asymmetric composite membranes for dye rejection, Appl. Surf. Sci. 478 (2019) 514–521.
[17] J. Hasan, R.J. Crawford, E.P. Ivanova, Antibacterial surfaces: The quest for a new generation of biomaterials, Trends Biotechnol. 31 (5) (2013) 295–304.
[18] Y.H. Chen, E.J.L. Lu, Y.T. Chang, S.Y. Huang, RDF-Chord: A hybrid PDMS for P2P systems, Comput. Stand. Interfaces 43 (2016) 53–67.
[19] S.T. Mitrouli, M. Kostoglou, A.J. Karabelas, Calcium carbonate scaling of desalination membranes: Assessment of scaling parameters from dead-end filtration experiments, J. Membr. Sci. 510 (2016) 293–305.
[20] L.C. Huang, S. Zhao, Z. Wang, J.H. Wu, J.X. Wang, S.C. Wang, In situ immobilization of silver nanoparticles for improving permeability, antifouling and anti-bacterial properties of ultrafiltration membrane, J. Membr. Sci. 499 (2016) 269–281.
[21] N. Alghezawi, O. Şanlı, L. Aras, G. Asman, Separation of acetic acid-water mixtures through acrylonitrile grafted poly(vinyl alcohol) membranes by pervaporation, Chem. Eng. Process. Process. Intensif. 44 (1) (2005) 51–58.
[22] M.S. Gaur, P.K. Singh, Suruchi, R.S. Chauhan, Structural and thermal properties of polysulfone-ZnO nanocomposites, J. Therm. Anal. Calorim. 111 (1) (2013) 743–751.
[23] G.S. Ajmani, D. Goodwin, K. Marsh, D.H. Fairbrother, K.J. Schwab, J.G. Jacangelo, H. Huang, Modification of low pressure membranes with carbon nanotube layers for fouling control, Water Res. 46 (17) (2012) 5645–5654.
[24] A. Sabir, M. Shafiq, A. Islam, A. Sarwar, M.R. Dilshad, A. Shafeeq, M.T. Zahid Butt, T. Jamil, Fabrication of tethered carbon nanotubes in cellulose acetate/polyethylene glycol-400 composite membranes for reverse osmosis, Carbohydr. Polym. 132 (2015) 589–597.
[25] M. Ben-Sasson, X.L. Lu, E. Bar-Zeev, K.R. Zodrow, S. Nejati, G.G. Qi, E.P. Giannelis, M. Elimelech, In situ formation of silver nanoparticles on thin-film composite reverse osmosis membranes for biofouling mitigation, Water Res. 62 (2014) 260–270.
[26] S. Qiu, L.G. Wu, X.J. Pan, L. Zhang, H.L. Chen, C.J. Gao, Preparation and properties of functionalized carbon nanotube/PSF blend ultrafiltration membranes, J. Membr. Sci. 342 (1–2) (2009) 165–172.
[27] L. Brunet, D.Y. Lyon, K. Zodrow, J.C. Rouch, B. Caussat, P. Serp, J.C. Remigy, M.R. Wiesner, P.J.J. Alvarez, Properties of membranes containing semi-dispersed carbon nanotubes, Environ. Eng. Sci. 25 (4) (2008) 565–576.
[28] M.A. Aroon, A.F. Ismail, M.M. Montazer-Rahmati, T. Matsuura, Effect of chitosan as a functionalization agent on the performance and separation properties of polyimide/multi-walled carbon nanotubes mixed matrix flat sheet membranes, J. Membr. Sci. 364 (1–2) (2010) 309–317.
[29] T. Xia, M. Kovochich, J. Brant, M. Hotze, J. Sempf, T. Oberley, C. Sioutas, J.I. Yeh, M.R. Wiesner, A.E. Nel, Comparison of the abilities of ambient and manufactured nanoparticles to induce cellular toxicity according to an oxidative stress paradigm, Nano Lett. 6 (8) (2006) 1794–1807.
[30] K. Balasubramanian, M. Burghard, Chemically functionalized carbon nanotubes, Small 1 (2) (2005) 180–192.
[31] R.P. Castro, H.G. Monbouquette, Y. Cohen, Shear-induced permeability changes in a polymer grafted silica membrane, J. Membr. Sci. 179 (1–2) (2000) 207–220.
[32] S. Kim, L. Chen, J.K. Johnson, E. Marand, Polysulfone and functionalized carbon nanotube mixed matrix membranes for gas separation: Theory and experiment, J. Membr. Sci. 294 (1–2) (2007) 147–158.
[33] L. Cao, H.Z. Chen, M. Wang, J.Z. Sun, X.B. Zhang, F.Z. Kong, Photoconductivity study of modified carbon nanotube/oxotitanium phthalocyanine composites, J. Phys. Chem. B 106 (35) (2002) 8971–8975.
[34] V.T. Le, C.L. Ngo, Q.T. Le, T.T. Ngo, D.N. Nguyen, M.T. Vu, Surface modification and functionalization of carbon nanotube with some organic compounds, Adv. Nat. Sci: Nanosci. Nanotechnol. 4 (3) (2013) 035017.
[35] S. Indermun, Y.E. Choonara, P. Kumar, L.C. du Toit, G. Modi, R. Luttge, V. Pillay, An interfacially plasticized electro-responsive hydrogel for transdermal electro-activated and modulated (TEAM) drug delivery, Int. J. Pharm. 462 (1–2) (2014) 52–65.
[36] M.C.F. Soares, M.M. Viana, Z.L. Schaefer, V.S. Gangoli, Y.H. Cheng, V. Caliman, M.S. Wong, G.G. Silva, Surface modification of carbon black nanoparticles by dodecylamine: Thermal stability and phase transfer in brine medium, Carbon 72 (2014) 287–295.
[37] S.S. Kish, A. Rashidi, H.R. Aghabozorg, L. Moradi, Increasing the octane number of gasoline using functionalized carbon nanotubes, Appl. Surf. Sci. 256 (11) (2010) 3472–3477.
[38] A. Matin, Z. Khan, S.M.J. Zaidi, M.C. Boyce, Biofouling in reverse osmosis membranes for seawater desalination: Phenomena and prevention, Desalination 281 (2011) 1–16.
[39] F.A. Abuilaiwi, T. Laoui, M. Al-harthi, M.A. Atieh , Modification and functionalization of multiwalled carbon nanotube (MWCNT) via fischer esterification, Arab. J. Sci. Eng. 35 (2010) 37–48.
[40] B. Chakrabarty, A.K. Ghoshal, M.K. Purkait, Preparation, characterization and performance studies of polysulfone membranes using PVP as an additive, J. Membr. Sci. 315 (1–2) (2008) 36–47.
[41] Hideto Matsuyama, T.M., Masaaki Teramoto, Kiyotaka Kobayashi, Effect of PVP additive on porous polysulfone membrane formation by immersion recipitation method, Sep. Sci. Technol. 38 (2003) 3449–3458.
[42] Q.Z. Zheng, P. Wang, Y.N. Yang, D.J. Cui, The relationship between porosity and kinetics parameter of membrane formation in PSF ultrafiltration membrane, J. Membr. Sci. 286 (1–2) (2006) 7–11.
[43] M.M.A. Shirazi, A. Kargari, S. Bazgir, M. Tabatabaei, M.J.A. Shirazi, M.S. Abdullah, T. Matsuura, A.F. Ismail, Characterization of electrospun polystyrene membrane for treatment of biodiesel's water-washing effluent using atomic force microscopy, Desalination 329 (2013) 1–8.
[44] M.M.A. Shirazi, D. Bastani, A. Kargari, M. Tabatabaei, Characterization of polymeric membranes for membrane distillation using atomic force microscopy, Desalination Water Treat. 51 (31–33) (2013) 6003–6008.
[45] Y.Q. Wang, T. Wang, Y.L. Su, F.B. Peng, H. Wu, Z.Y. Jiang, Remarkable reduction of irreversible fouling and improvement of the permeation properties of poly(ether sulfone) ultrafiltration membranes by blending with pluronic F₁₂₇, Langmuir 21 (25) (2005) 11856–11862.
[46] F. Avilés, J.V. Cauich-Rodríguez, L. Moo-Tah, A. May-Pat, R. Vargas-Coronado, Evaluation of mild acid oxidation treatments for MWCNT functionalization, Carbon 47 (13) (2009) 2970–2975.
[47] M.J. Han, S.T. Nam, Thermodynamic and rheological variation in polysulfone solution by PVP and its effect in the preparation of phase inversion membrane, J. Membr. Sci. 202 (1–2) (2002) 55–61.
[48] I.M. Wienk, R.M. Boom, M.A.M. Beerlage, A.M.W. Bulte, C.A. Smolders, H. Strathmann, Recent advances in the formation of phase inversion membranes made from amorphous or semi-crystalline polymers, J. Membr. Sci. 113 (2) (1996) 361–371.
[49] C.R. Rong, G. Ma, S.L. Zhang, L. Song, Z. Chen, G.B. Wang, P.M. Ajayan, Effect of carbon nanotubes on the mechanical properties and crystallization behavior of poly(ether ether ketone), Compos. Sci. Technol. 70 (2) (2010) 380–386.
[50] M. Wasim, A. Sabir, M. Shafiq, R.U. Khan, Fractionation of direct dyes using modified vapor grown carbon nanofibers and zirconia in cellulose acetate blend membranes, Sci. Total Environ. 677 (2019) 194–204.
[51] M. Wasim, A. Sabir, R.U. Khan, Membranes with tunable graphene morphology prepared via Stöber method for high rejection of azo dyes, J. Environ. Chem. Eng. 9 (5) (2021) 106069.
[52] X.Y. Wei, Z. Wang, J.X. Wang, S.C. Wang, A novel method of surface modification to polysulfone ultrafiltration membrane by preadsorption of citric acid or sodium bisulfite, Membr. Water Treat. 3 (1) (2012) 35–49.
[53] M.J. O'Connell, P. Boul, L.M. Ericson, C. Huffman, Y.H. Wang, E. Haroz, C. Kuper, J. Tour, K.D. Ausman, R.E. Smalley, Reversible water-solubilization of single-walled carbon nanotubes by polymer wrapping, Chem. Phys. Lett. 342 (3–4) (2001) 265–271.
[54] J. Yin, G.C. Zhu, B.L. Deng, Multi-walled carbon nanotubes (MWNTs)/polysulfone (PSU) mixed matrix hollow fiber membranes for enhanced water treatment, J. Membr. Sci. 437 (2013) 237–248.
[55] V. Vatanpour, S.S. Madaeni, R. Moradian, S. Zinadini, B. Astinchap, Novel antibifouling nanofiltration polyethersulfone membrane fabricated from embedding TiO₂ coated multiwalled carbon nanotubes, Sep. Purif. Technol. 90 (2012) 69–82.
[56] Q. Shi, Y.L. Su, S.P. Zhu, C. Li, Y.Y. Zhao, Z.Y. Jiang, A facile method for synthesis of pegylated polyethersulfone and its application in fabrication of antifouling ultrafiltration membrane, J. Membr. Sci. 303 (1–2) (2007) 204–212.
[57] A.V.R. Reddy, H.R. Patel, Chemically treated polyethersulfone/polyacrylonitrile blend ultrafiltration membranes for better fouling resistance, Desalination 221 (1–3) (2008) 318–323.
[58] I.H. Huisman, P. Prádanos, A. Hernández, The effect of protein-protein and protein-membrane interactions on membrane fouling in ultrafiltration, J. Membr. Sci. 179 (1–2) (2000) 79–90.
[59] J.F. Blanco, J. Sublet, Q.T. Nguyen, P. Schaetzel, Formation and morphology studies of different polysulfones-based membranes made by wet phase inversion process, J. Membr. Sci. 283 (1–2) (2006) 27–37.
[60] D. Rana, T. Matsuura, Surface modifications for antifouling membranes, Chem. Rev. 110 (4) (2010) 2448–2471.
[61] Z. Spitalsky, D. Tasis, K. Papagelis, C. Galiotis, Carbon nanotube-polymer composites: Chemistry, processing, mechanical and electrical properties, Prog. Polym. Sci. 35 (3) (2010) 357–401.
[62] S. Bose, R.A. Khare, P. Moldenaers, Assessing the strengths and weaknesses of various types of pre-treatments of carbon nanotubes on the properties of polymer/carbon nanotubes composites: A critical review, Polymer 51 (5) (2010) 975–993.
[63] R. Andrews, M.C.Weisenberger, Carbon nanotube polymer composites, Curr. Opin. Solid State Mater. Sci. 8 (2004) 31–37. .
[64] M. Moniruzzaman, K.I. Winey, Polymer nanocomposites containing carbon nanotubes, Macromolecules 39 (16) (2006) 5194–5205.
[65] M.F. de Volder, S.H. Tawfick, R.H. Baughman, A.J. Hart, Carbon nanotubes: Present and future commercial applications, Science 339 (6119) (2013) 535–539.
[66] S. Kang, M. Pinault, L.D. Pfefferle, M. Elimelech, Single-walled carbon nanotubes exhibit strong antimicrobial activity, Langmuir 23 (17) (2007) 8670–8673.
[67] H.Q. Chen, B. Wang, D. Gao, M. Guan, L.N. Zheng, H. Ouyang, Z.F. Chai, Y.L. Zhao, W.Y. Feng, Broad-spectrum antibacterial activity of carbon nanotubes to human gut bacteria, Small 9 (16) (2013) 2735–2746.
[68] S. Kang, M. Herzberg, D.F. Rodrigues, M. Elimelech, Antibacterial effects of carbon nanotubes: Size does matter!, Langmuir 24 (13) (2008) 6409–6413.
[69] S. Aslan, C.Z. Loebick, S. Kang, M. Elimelech, L.D. Pfefferle, P.R. van Tassel, Antimicrobial biomaterials based on carbon nanotubes dispersed in poly(lactic-co-glycolic acid), Nanoscale 2 (9) (2010) 1789–1794.
[70] C. Yang, J. Mamouni, Y.A. Tang, L.J. Yang, Antimicrobial activity of single-walled carbon nanotubes: Length effect, Langmuir 26 (20) (2010) 16013–16019.
[71] C.D. Vecitis, K.R. Zodrow, S. Kang, M. Elimelech, Electronic-structure-dependent bacterial cytotoxicity of single-walled carbon nanotubes, ACS Nano 4 (9) (2010) 5471–5479.
[72] S. Liu, L. Wei, L. Hao, N. Fang, M.W. Chang, R. Xu, Y. Yang, Y. Chen, Sharper and faster “nano darts” kill more bacteria: A study of antibacterial activity of individually dispersed pristine single-walled carbon nanotube, ACS Nano 3 (12) (2009) 3891–3902.
[73] D.F. Rodrigues, M. Elimelech, Toxic effects of single-walled carbon nanotubes in the development of E. coli biofilm, Environ. Sci. Technol. 44 (12) (2010) 4583–4589.
[74] J.H. Choi, J. Jegal, W.N. Kim, Fabrication and characterization of multi-walled carbon nanotubes/polymer blend membranes, J. Membr. Sci. 284 (1–2) (2006) 406–415.
[75] E. Celik, H. Park, H. Choi, H. Choi, Carbon nanotube blended polyethersulfone membranes for fouling control in water treatment, Water Res. 45 (1) (2011) 274–282.
[76] Y. Medina-Gonzalez, J.C. Remigy, Sonication-assisted preparation of pristine MWCNT-polysulfone conductive microporous membranes, Mater. Lett. 65 (2) (2011) 229–232.
[77] H.Q. Wu, B.B. Tang, P.Y. Wu, Novel ultrafiltration membranes prepared from a multi-walled carbon nanotubes/polymer composite, J. Membr. Sci. 362 (1–2) (2010) 374–383.
[78] C. de Lannoy, D. Jassby, D.D. Davis, M.R. Wiesner, A highly electrically conductive polymer-multiwalled carbon nanotube nanocomposite membrane, J. Membr. Sci. 415-416 (2012) 718–724.
[79] C.F. de Lannoy, D.J., D.D. Davis, M.R. Wiesner, A highly electrically conductive polymer-multiwalled carbon nanotube nanocomposite membrane, J. Membr. Sci. 415–416 (2012) 718–724.
[80] C.-F. de Lannoy, E.Soyer, M. R. Wiesner, Optimizing carbon nanotube-reinforced polysulfone ultrafiltration membranes through carboxylic acid functionalization , J. Membr. Sci. 447 (2013) 395–402.

Effective desalination and anti-biofouling performance via surface immobilized MWCNTs on RO membrane

Effective desalination and anti-biofouling performance via surface immobilized MWCNTs on RO membrane

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	Wensheng Li, Liangyuan Qi, Daolin Ye, Wei Cai, Weiyi Xing. Facile modification of aluminum hypophosphate and its flame retardancy for polystyrene[J]. 中国化学工程学报, 2023, 60(8): 90-98.
[2]	Jing Huang, Honghui Cai, Qian Zhao, Yunpeng Zhou, Haibo Liu, Jing Wang. Dual-functional pyrene implemented mesoporous silicon material used for the detection and adsorption of metal ions[J]. 中国化学工程学报, 2023, 60(8): 108-117.
[3]	Sufei Wang, Mengjie Hao, Danyang Xiao, Tianmiao Zhang, Hua Li, Zhongshan Chen. Synthesis of porous carbon nanomaterials and their application in tetracycline removal from aqueous solutions[J]. 中国化学工程学报, 2023, 59(7): 200-209.
[4]	Shanghong Ma, Haitao Zhang, Jianbo Qu, Xiuzhong Zhu, Qingfei Hu, Jianyong Wang, Peng Ye, Futao Sai, Shiwei Chen. Preparation of waterborne polyurethane/β-cyclodextrin composite nanosponge by ion condensation method and its application in removing of dyes from wastewater[J]. 中国化学工程学报, 2023, 58(6): 124-136.
[5]	Shichao Tian, Yuming Tu, Rujie Li, Yufan Du, Zhiyong Zhou, Fan Zhang, Zhongqi Ren. Comprehensive treatment of latex wastewater and resource utilization of concentrated liquid[J]. 中国化学工程学报, 2023, 57(5): 183-192.
[6]	Kai Zhang, Huan-Huan Wu, Hui-Qian Huo, Yan-Li Ji, Yong Zhou, Cong-Jie Gao. Recent advances in nanofiltration, reverse osmosis membranes and their applications in biomedical separation field[J]. 中国化学工程学报, 2022, 49(9): 76-99.
[7]	Fu Yang, Ruyi Wang, Shijian Zhou, Xuyu Wang, Yan Kong, Shuying Gao. Mesopore-encaged V-Mn oxides: Progressive insertion approach triggering reconstructed active sites to enhance catalytic oxidative desulfuration[J]. 中国化学工程学报, 2022, 45(5): 182-193.
[8]	Jing Dou, Shuo Han, Saisai Lin, Zhikan Yao, Lian Hou, Lin Zhang. Highly permeable reverse osmosis membranes incorporated with hydrophilic polymers of intrinsic microporosity via interfacial polymerization[J]. 中国化学工程学报, 2022, 45(5): 194-202.
[9]	Mingxia Tian, Aili Wang, Hengbo Yin. Evolution of copper nanowires through coalescing of copper nanoparticles induced by aliphatic amines and their electrical conductivities in polyester films[J]. 中国化学工程学报, 2022, 44(4): 284-291.
[10]	Qi Liu, Gao Cheng, Ming Sun, Weixiong Yu, Xiaohong, Zeng, Shichang Tang, Yongfeng li, Lin Yu. A facile preparation of hausmannite as a high-performance catalyst for toluene combustion[J]. 中国化学工程学报, 2022, 44(4): 392-401.
[11]	Xiangzhao Hu, Junjie Sun, Wanzhen Zheng, Sixing Zheng, Yu Xie, Xiang Gao, Bin Yang, Zhongjian Li, Lecheng Lei, Yang Hou. Layered bismuth oxide/bismuth sulfide supported on carrageenan derived carbon for efficient carbon dioxide electroreduction to formate[J]. 中国化学工程学报, 2022, 43(3): 116-123.
[12]	Yixuan Gong, Jiasai Yao, Ping Wang, Zhenxing Li, Hongjun Zhou, Chunming Xu. Perspective of hydrogen energy and recent progress in electrocatalytic water splitting[J]. 中国化学工程学报, 2022, 43(3): 282-296.
[13]	Aisha Kanwal, Shamaila Sajjad, Sajjad Ahmed Khan Leghari, Muhammad Naeem Khan. Strong interfacial charge transfer between hausmannite manganese oxide and alumina for efficient photocatalysis[J]. 中国化学工程学报, 2021, 33(5): 147-159.
[14]	Trung Thanh Nguyen, Vu Anh Khoa Tran, Le Ba Tran, Phuoc Toan Phan, Minh Tan Nguyen, Long Giang Bach, Surapol Padungthon, Cong Khiem Ta, Nhat Huy Nguyen. Synthesis of cation exchange resin-supported iron and magnesium oxides/hydroxides composite for nitrate removal in water[J]. 中国化学工程学报, 2021, 32(4): 378-384.
[15]	Xiaosa Xu, Yuqian Qiu, Jianping Wu, Baichuan Ding, Qianhui Liu, Guangshen Jiang, Qiongqiong Lu, Jiangan Wang, Fei Xu, Hongqiang Wang. Porous nitrogen-enriched hollow carbon nanofibers as freestanding electrode for enhanced lithium storage[J]. 中国化学工程学报, 2021, 32(4): 416-422.