Porous nitrogen-enriched hollow carbon nanofibers as freestanding electrode for enhanced lithium storage

doi:10.1016/j.cjche.2020.09.055

中国化学工程学报 ›› 2021, Vol. 32 ›› Issue (4): 416-422.DOI: 10.1016/j.cjche.2020.09.055

• Energy, Resources and Environmental Technology • 上一篇下一篇

Porous nitrogen-enriched hollow carbon nanofibers as freestanding electrode for enhanced lithium storage

Xiaosa Xu¹, Yuqian Qiu¹, Jianping Wu¹, Baichuan Ding¹, Qianhui Liu¹, Guangshen Jiang¹, Qiongqiong Lu², Jiangan Wang¹, Fei Xu¹, Hongqiang Wang¹

1 State Key Laboratory of Solidification Processing, Center for Nano Energy Materials, School of Materials Science and Engineering, Northwestern Polytechnical University and Shaanxi Joint Laboratory of Graphene(NPU), Xi'an 710072, China;
2 Leibniz Institute for Solid State and Materials Research(IFW) Dresden e. V., Helmholtzstr 20, 01069 Dresden, Germany

收稿日期:2020-05-23 修回日期:2020-08-05 出版日期:2021-04-28 发布日期:2021-06-19
通讯作者: Fei Xu, Hongqiang Wang
基金资助:
This work was supported by the National Natural Science Foundation of China (51972270, 51702262, 51911530212, 51872240, 51672225, 61805201), the China Postdoctoral Science Foundation (2018T111093, 2018M643732, 2018BSHYDZZ57), the Natural Science Foundation of Shaanxi Province (2020JZ-07), the Key Research and Development Program of Shaanxi Province (2019TSLGY07-03), the Fundamental Research Funds for the Central Universities (3102019JC005 and 3102019ghxm004), and the Research Fund of the State Key Laboratory of Solidification Processing (NPU), China (2019-QZ-03). H. Wang acknowledges support from the 1000 Youth Talent Program of China. We would like to thank the Analytical & Testing Center of Northwestern Polytechnical University for XPS and TEM characterizations.

Porous nitrogen-enriched hollow carbon nanofibers as freestanding electrode for enhanced lithium storage

Xiaosa Xu¹, Yuqian Qiu¹, Jianping Wu¹, Baichuan Ding¹, Qianhui Liu¹, Guangshen Jiang¹, Qiongqiong Lu², Jiangan Wang¹, Fei Xu¹, Hongqiang Wang¹

1 State Key Laboratory of Solidification Processing, Center for Nano Energy Materials, School of Materials Science and Engineering, Northwestern Polytechnical University and Shaanxi Joint Laboratory of Graphene(NPU), Xi'an 710072, China;
2 Leibniz Institute for Solid State and Materials Research(IFW) Dresden e. V., Helmholtzstr 20, 01069 Dresden, Germany

Received:2020-05-23 Revised:2020-08-05 Online:2021-04-28 Published:2021-06-19
Contact: Fei Xu, Hongqiang Wang
Supported by:
This work was supported by the National Natural Science Foundation of China (51972270, 51702262, 51911530212, 51872240, 51672225, 61805201), the China Postdoctoral Science Foundation (2018T111093, 2018M643732, 2018BSHYDZZ57), the Natural Science Foundation of Shaanxi Province (2020JZ-07), the Key Research and Development Program of Shaanxi Province (2019TSLGY07-03), the Fundamental Research Funds for the Central Universities (3102019JC005 and 3102019ghxm004), and the Research Fund of the State Key Laboratory of Solidification Processing (NPU), China (2019-QZ-03). H. Wang acknowledges support from the 1000 Youth Talent Program of China. We would like to thank the Analytical & Testing Center of Northwestern Polytechnical University for XPS and TEM characterizations.

摘要/Abstract

摘要： One-dimensional porous carbons bearing high surface areas and sufficient heteroatom doped functionalities are essential for advanced electrochemical energy storage devices, especially for developing freestanding film electrodes. Here we develop a porous, nitrogen-enriched, freestanding hollow carbon nanofiber (PN-FHCF) electrode material via filtration of polypyrrole (PPy) hollow nanofibers formed by in situ self-degraded template-assisted strategy, followed by NH₃-assisted carbonization. The PN-FHCF retains the freestanding film morphology that is composed of three-dimensional networks from the entanglement of 1D nanofiber and delivers 3.7-fold increase in specific surface area (592 m²·g^-1) compared to the carbon without NH₃ treatment (FHCF). In spite of the enhanced specific surface area, PNFHCF still exhibits comparable high content of surface N functionalities (8.8%, atom fraction) to FHCF. Such developed hierarchical porous structure without sacrificing N doping functionalities together enables the achievement of high capacity, high-rate property and good cycling stability when applied as self-supporting anode in lithium-ion batteries, superior to those of FHCF without NH₃ treatment.

关键词: Energy, Electrochemistry, Nanomaterials, Hollow carbon nanofibers, Freestanding electrode, Lithium-ion batteries

Abstract: One-dimensional porous carbons bearing high surface areas and sufficient heteroatom doped functionalities are essential for advanced electrochemical energy storage devices, especially for developing freestanding film electrodes. Here we develop a porous, nitrogen-enriched, freestanding hollow carbon nanofiber (PN-FHCF) electrode material via filtration of polypyrrole (PPy) hollow nanofibers formed by in situ self-degraded template-assisted strategy, followed by NH₃-assisted carbonization. The PN-FHCF retains the freestanding film morphology that is composed of three-dimensional networks from the entanglement of 1D nanofiber and delivers 3.7-fold increase in specific surface area (592 m²·g^-1) compared to the carbon without NH₃ treatment (FHCF). In spite of the enhanced specific surface area, PNFHCF still exhibits comparable high content of surface N functionalities (8.8%, atom fraction) to FHCF. Such developed hierarchical porous structure without sacrificing N doping functionalities together enables the achievement of high capacity, high-rate property and good cycling stability when applied as self-supporting anode in lithium-ion batteries, superior to those of FHCF without NH₃ treatment.

Key words: Energy, Electrochemistry, Nanomaterials, Hollow carbon nanofibers, Freestanding electrode, Lithium-ion batteries

Xiaosa Xu, Yuqian Qiu, Jianping Wu, Baichuan Ding, Qianhui Liu, Guangshen Jiang, Qiongqiong Lu, Jiangan Wang, Fei Xu, Hongqiang Wang. Porous nitrogen-enriched hollow carbon nanofibers as freestanding electrode for enhanced lithium storage[J]. 中国化学工程学报, 2021, 32(4): 416-422.

参考文献

[1] W.J. Zhang, W.C. Shen, Y.Q. Weng, R.T. Lv, F.Y. Kang, Z.H. Huang, Steam selective etching:a strategy to effectively enhance the flexibility and suppress the volume change of carbonized paper-supported electrodes, ACS Nano 13(2019) 5731-5741.
[2] M. Inagaki, Y. Yang, F.Y. Kang, Carbon nanofibers prepared via electrospinning, Adv. Mater. 24(2012) 2547-2566.
[3] Y.R. Liang, W.C. Zhang, D.C. Wu, Q.Q. Ni, M.Q. Zhang, Interface engineering of carbon-based nanocomposites for advanced electrochemical energy storage, Adv. Mater. Interfaces 5(2018) 1800430.
[4] X.Y. Zheng, J.Y. Luo, W. Lv, D.W. Wang, Q.H. Yang, Two-dimensional porous carbon:synthesis and ion-transport properties, Adv. Mater. 27(2015) 5388-5395.
[5] C. Zhang, W. Lv, Y. Tao, Q.H. Yang, Towards superior volumetric performance:design and preparation of novel carbon materials for energy storage, Energy Environ. Sci. 8(2015) 1390-1403.
[6] N.Z. Shang, S.T. Gao, X.Y. Zhang, S.H. Zhang, C. Feng, Z. Wang, C. Wang, N, P dual-doped hierarchically porous carbon derived from a polyelectrolyte complex as high-performance electrodes for supercapacitors, Energy Technol. 7(2019) 1800641.
[7] C. Luo, S.Z. Niu, G.M. Zhou, W. Lv, B.H. Li, F.Y. Kang, Q.H. Yang, Dual-functional hard template directed one-step formation of a hierarchical porous carboncarbon nanotube hybrid for lithium-sulfur batteries, Chem. Commun. 52(2016) 12143-12146.
[8] L.B. Dong, C.J. Xu, Y. Li, Z.H. Huang, F.Y. Kang, Q.H. Yang, X. Zhao, Flexible electrodes and supercapacitors for wearable energy storage:A review by category, J. Mater. Chem. A 4(2016) 4659-4685.
[9] M.C. Wu, C.L. Li, R. Liu, Freestanding 1D hierarchical porous Fe-N-doped carbon nanofibers as efficient oxygen reduction catalysts for Zn-Air batteries, Energy Technol. 7(2019) 1800790.
[10] L.B. Dong, G.M. Liang, C.J. Xu, W.B. Liu, Z.Z. Pan, E.L. Zhou, F.Y. Kang, Q.H. Yang, Multi hierarchical construction-induced superior capacitive performances of flexible electrodes for wearable energy storage, Nano Energy 34(2017) 242-248.
[11] F. Xu, Z.W. Tang, S.Q. Huang, L.Y. Chen, Y.R. Liang, W.C. Mai, H. Zhong, R.W. Fu, D.C. Wu, Facile synthesis of ultrahigh-surface-area hollow carbon nanospheres for enhanced adsorption and energy storage, Nat. Commun. 6(2015) 7221.
[12] F. Xu, J. Xu, H.J. Xu, Y.H. Lu, H.Y. Yang, Z.W. Tang, Z.T. Lu, R.W. Fu, D.C. Wu, Fabrication of novel powdery carbon aerogels with high surface areas for superior energy storage, Energy Storage Mater. 7(2017) 8-16.
[13] J. Liu, N.P. Wickramaratne, S.Z. Qiao, M. Jaroniec, Molecular-based design and emerging applications of nanoporous carbon spheres, Nat. Mater. 14(2015) 763-774.
[14] F. Xu, Y.X. Zhai, E. Zhang, Q.H. Liu, G.S. Jiang, X.S. Xu, Y.Q. Qiu, X.M. Liu, H.Q. Wang, S. Kaskel, Ultrastable surface-dominated pseudocapacitive potassium storage enabled by edge-enriched N-doped porous carbon nanosheets, Angew. Chem. Int. Ed. 59(44) (2020) 19460-19467.
[15] F. Xu, Y.Q. Qiu, H.J. Han, G.S. Jiang, R.X. Zhao, E. Zhang, H.J. Li, H.Q. Wang, S. Kaskel, Manipulation of carbon framework from the microporous to nonporous via a mechanical-assisted treatment for structure-oriented energy storage, Carbon 159(2020) 140-148.
[16] F. Xu, B.C. Ding, Y.Q. Qiu, J.P. Wu, Z.R.Z. Cheng, G.S. Jiang, H.J. Li, X.R. Liu, B.Q. Wei, H.Q. Wang, Hollow carbon nanospheres with developed porous structure and retained N doping for facilitated electrochemical energy storage, Langmuir 35(2019) 12889-12897.
[17] X.Q. Yang, G.Q. Zhang, M.L. Zhong, D.C. Wu, R.W. Fu, Ammonia-assisted semicarbonization:a simple method to introduce micropores without damaging a 3D mesoporous carbon nanonetwork structure, Langmuir 30(2014) 9183-9189.
[18] Y. Liu, N. Zhang, L. Jiao, J. Chen, Tin nanodots encapsulated in porous nitrogendoped carbon nanofibers as a free-standing anode for advanced sodium-ion batteries, Adv. Mater. 27(2015) 6702-6707.
[19] J.B. Wu, X. Gao, H.M. Yu, T.P. Ding, Y.X. Yan, B. Yao, X. Yao, D.C. Chen, M.L. Liu, L. Huang, A scalable free-standing V₂O₅/CNT film electrode for supercapacitors with a wide operation voltage (1.6 V) in an aqueous electrolyte, Adv. Funct. Mater. 26(2016) 6114-6120.
[20] F.W. Liu, S.J. Luo, D. Liu, W. Chen, Y. Huang, L. Dong, L. Wang, Facile processing of free-standing polyaniline/SWCNT film as an integrated electrode for flexible supercapacitor application, ACS Appl. Mater. Interfaces 9(2017) 33791-33801.
[21] D. Ni, W. Sun, Z.H. Wang, Y. Bai, H.S. Lei, X.H. Lai, K.N. Sun, Heteroatom-doped mesoporous hollow carbon spheres for fast sodium storage with an ultralong cycle life, Adv. Energy Mater. 9(2019) 1900036.
[22] W.C. Zhang, C.W. Lan, X.H. Xie, Q.Y. Cao, M.T. Zheng, H.W. Dong, H. Hu, Y. Xiao, Y.L. Liu, Y.R. Liang, Facile construction of hollow carbon nanosphereinterconnected network for advanced sodium-ion battery anode, J. Colloid Interf. Sci. 546(2019) 53-59.
[23] F. Xu, Y.Q. Qiu, G.S. Jiang, B.C. Ding, J.Y. Li, Q.H. Liu, J.P. Wu, X.S. Xu, H.Q. Wang, Y.R. Liang, Unraveling the correlation between structures of carbon nanospheres derived from polymeric spheres and their electrochemical performance to achieve high-rate supercapacitors, Macromol. Rapid Comm. 40(17) (2019) 1800770.
[24] F. Xu, H.J. Han, B.C. Ding, Y.Q. Qiu, E. Zhang, H.J. Li, S. Kaskel, Engineering pore ratio in hierarchical porous carbons towards high-rate and large-volumetric performances, Micropor. Mesopor. Mater. 282(2019) 205-210.
[25] L. Qie, W.M. Chen, Z.H. Wang, Q.G. Shao, X. Li, L.X. Yuan, X.L. Hu, W.X. Zhang, Y. H. Huang, Nitrogen-doped porous carbon nanofiber webs as anodes for lithium ion batteries with a superhigh capacity and rate capability, Adv. Mater. 24(2012) 2047-2050.
[26] H. Liu, L.Y. Chen, Y.R. Liang, R.W. Fu, D.C. Wu, Multi-dimensional construction of a novel active yolk@conductive shell nanofiber web as a self-standing anode for high-performance lithium-ion batteries, Nanoscale 7(2015) 19930-19934.
[27] W.H. Choi, M.J. Choi, J.H. Bang, Nitrogen-doped carbon nanocoil array integrated on carbon nanofiber paper for supercapacitor electrodes, ACS Appl. Mater. Interfaces 7(2015) 19370-19381.
[28] G.C. Ye, X.Y. Zhu, S. Chen, D.H. Li, Y.F. Yin, Y. Lu, S. Komarneni, D.J. Yang, Nanoscale engineering of nitrogen-doped carbon nanofiber aerogels for enhanced lithium ion storage, J. Mater. Chem. A 5(2017) 8247-8254.
[29] Y. Liu, J.Y. Zhou, L.L. Chen, P. Zhang, W.B. Fu, H. Zhao, Y.F. Ma, X.J. Pan, Z.X. Zhang, W.H. Han, E.Q. Xie, Highly flexible freestanding porous carbon nanofibers for electrodes materials of high-performance all-carbon supercapacitors, ACS Appl. Mater. Interfaces 7(2015) 23515-23520.
[30] H.J. Liu, J. Wang, C.X. Wang, Y.Y. Xia, Ordered hierarchical msoporous/microporous carbon derived from mesoporous titanium-carbide/carbon composites and its electrochemical performance in supercapacitor, Adv. Energy Mater. 1(2011) 1101-1108.
[31] W.X. Yang, J.H. Zhou, S. Wang, W.Y. Zhang, Z.C. Wang, F. Lv, K. Wang, Q. Sun, S. J. Guo, Freestanding film made by necklace-like N-doped hollow carbon with hierarchical pores for high-performance potassium-ion storage, Energy Environ. Sci. 12(2019) 1605-1612.
[32] F. Xu, D.C. Wu, R.W. Fu, B.Q. Wei, Design and preparation of porous carbons from conjugated polymer precursors, Mater. Today 20(2017) 629-656.
[33] Q. Liu, Y.B. Wang, L.M. Dai, J.N. Yao, Scalable fabrication of nanoporous carbon fiber films as bifunctional catalytic electrodes for flexible Zn-Air batteries, Adv. Mater. 28(2016) 3000-3006.
[34] D.H. Li, C.X. Lv, L. Liu, Y.Z. Xia, X.L. She, S.J. Guo, D.J. Yang, Egg-box structure in cobalt alginate:a new approach to multifunctional hierarchical mesoporous N-doped carbon nanofibers for efficient catalysis and energy storage, ACS Cent. Sci. 1(2015) 261-269.
[35] S.X. Wang, L.P. Yang, L.P. Stubbs, X. Li, C.B. He, Lignin-derived fused electrospun carbon fibrous mats as high performance anode materials for lithium ion batteries, ACS Appl. Mater. Interfaces 5(2013) 12275-12282.
[36] X.M. Yang, Z.X. Zhu, T.Y. Dai, Y. Lu, Facile fabrication of functional polypyrrole nanotubes via a reactive self-degraded template, Macromol. Rapid Comm. 26(2005) 1736-1740.
[37] S.M. Shang, X.M. Yang, X.M. Tao, Easy synthesis of carbon nanotubes with polypyrrole nanotubes as the carbon precursor, Polymer 50(2009) 2815-2818.
[38] J.L. Wu, F. Xu, S.M. Li, P.W. Ma, X.C. Zhang, Q.H. Liu, R.W. Fu, D.C. Wu, Porous polymers as multifunctional material platforms toward task-specific applications, Adv. Mater. 31(2019) 1802922.
[39] M. Wei, T.Y. Dai, Y. Lu, Controlled fabrication of nanostructured polypyrrole on ion association template:Tubes, rods and networks, Synthetic Met. 160(2010) 849-854.
[40] F. Xu, R.J. Cai, Q.C. Zeng, C. Zou, D.C. Wu, F. Li, X.E. Lu, Y.R. Liang, R.W. Fu, Fast ion transport and high capacitance of polystyrene-based hierarchical porous carbon electrode material for supercapacitors, J. Mater. Chem. 21(2011) 1970-1976.
[41] H.W. Liang, Z.Y. Wu, L.F. Chen, C. Li, S.H. Yu, Bacterial cellulose derived nitrogen-doped carbon nanofiber aerogel:An efficient metal-free oxygen reduction electrocatalyst for zinc-air battery, Nano Energy 11(2015) 366-376.
[42] C.L. Mangun, K.R. Benak, J. Economy, K.L. Foster, Surface chemistry, pore sizes and adsorption properties of activated carbon fibers and precursors treated with ammonia, Carbon 39(2001) 1809-1820.
[43] H.W. Liang, X.D. Zhuang, S. Bruller, X.L. Feng, K. Mullen, Hierarchically porous carbons with optimized nitrogen doping as highly active electrocatalysts for oxygen reduction, Nat. Commun. 5(2014) 4973.
[44] D.S. Geng, C. Ying, Y.G. Chen, Y.L. Li, R.Y. Li, X.L. Sun, S.Y. Ye, S. Knights, High oxygen-reduction activity and durability of nitrogen-doped graphene, Energy Environ. Sci. 4(2011) 760-764.
[45] Y.Q. Ding, B.J. Yang, J.T. Chen, L. Zhang, J.S. Li, Y.L. Li, X.B. Yan, Nanotube-like hard carbon as high-performance anode material for sodium ion hybrid capacitors, Sci. China Mater. 61(2018) 285-295.
[46] Z.Y. Zhu, F. Liang, Z.R. Zhou, X.Y. Zeng, D. Wang, P. Dong, J.B. Zhao, S.G. Sun, Y.J. Zhang, X. Li, Expanded biomass-derived hard carbon with ultrastable performance in sodium-ion batteries, J. Mater. Chem. A 6(2018) 1513-1522.
[47] J.F. Cui, Y.L. Xi, S. Chen, D.H. Li, X.L. She, J. Sun, W. Han, D.J. Yang, S.J. Guo, Prolifera-green-tide as sustainable source for carbonaceous aerogels with hierarchical pore to achieve multiple energy storage, Adv. Funct. Mater. 26(2016) 8487-8495.
[48] D. Nan, Z.H. Huang, R.T. Lv, L. Yang, J.G. Wang, W.C. Shen, Y.X. Lin, X.L. Yu, L. Ye, H.Y. Sun, F.Y. Kang, Nitrogen-enriched electrospun porous carbon nanofiber networks as high-performance free-standing electrode materials, J. Mater. Chem. A 2(2014) 19678-19684.
[49] X.S. Xu, Y.X. Xu, F. Xu, G.S. Jiang, J. Jian, H.W. Yu, E.M. Zhang, D. Shchukin, S. Kaskel, H.Q. Wang, Black BiVO₄:Size tailored synthesis, rich oxygen vacancies, and sodium storage performance, J. Mater. Chem. A 8(2020) 1636-1645.
[50] G.S. Jiang, H. Han, W.Q. Zhuang, X.S. Xu, S. Kaskel, F. Xu, H.Q. Wang, Threedimensional ordered mesoporous cobalt nitride for fast-kinetics and stablecycling lithium storage, J. Mater. Chem. A 7(2019) 17561-17569.

Porous nitrogen-enriched hollow carbon nanofibers as freestanding electrode for enhanced lithium storage

Porous nitrogen-enriched hollow carbon nanofibers as freestanding electrode for enhanced lithium storage

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	Chuang Liang, Zhihao Liu, Baochang Sun, Haikui Zou, Guangwen Chu. Improvement in discharge characteristics and energy yield of ozone generation via configuration optimization of a coaxial dielectric barrier discharge reactor[J]. 中国化学工程学报, 2023, 60(8): 61-68.
[2]	Wensheng Li, Liangyuan Qi, Daolin Ye, Wei Cai, Weiyi Xing. Facile modification of aluminum hypophosphate and its flame retardancy for polystyrene[J]. 中国化学工程学报, 2023, 60(8): 90-98.
[3]	Jing Huang, Honghui Cai, Qian Zhao, Yunpeng Zhou, Haibo Liu, Jing Wang. Dual-functional pyrene implemented mesoporous silicon material used for the detection and adsorption of metal ions[J]. 中国化学工程学报, 2023, 60(8): 108-117.
[4]	Jindong Dai, Chi Zhai, Jiali Ai, Guangren Yu, Haichao Lv, Wei Sun, Yongzhong Liu. A cellular automata framework for porous electrode reconstruction and reaction-diffusion simulation[J]. 中国化学工程学报, 2023, 60(8): 262-274.
[5]	Minjie Shi, Nianting Chen, Yue Zhao, Cheng Yang, Chao Yan. Facile wet-chemical fabrication of bi-functional coordination polymer nanosheets for high-performance energy storage and anti-corrosion engineering[J]. 中国化学工程学报, 2023, 59(7): 118-127.
[6]	Sufei Wang, Mengjie Hao, Danyang Xiao, Tianmiao Zhang, Hua Li, Zhongshan Chen. Synthesis of porous carbon nanomaterials and their application in tetracycline removal from aqueous solutions[J]. 中国化学工程学报, 2023, 59(7): 200-209.
[7]	Shanghong Ma, Haitao Zhang, Jianbo Qu, Xiuzhong Zhu, Qingfei Hu, Jianyong Wang, Peng Ye, Futao Sai, Shiwei Chen. Preparation of waterborne polyurethane/β-cyclodextrin composite nanosponge by ion condensation method and its application in removing of dyes from wastewater[J]. 中国化学工程学报, 2023, 58(6): 124-136.
[8]	Ruicheng Shen, Shaojun Niu, Guobin Zhu, Kai Wu, Honghe Zheng. Mechanical behavior analysis of high power commercial lithium-ion batteries[J]. 中国化学工程学报, 2023, 58(6): 315-322.
[9]	Yanli Zhang, Zhengkun Hou, Dong Yao, Xiaomin Qiu, Hongru Zhang, Peizhe Cui, Yinglong Wang, Jun Gao, Zhaoyou Zhu, Limei Zhong. Energy, exergy, economic and environmental comprehensive analysis and multi-objective optimization of a sustainable zero liquid discharge integrated process for fixed-bed coal gasification wastewater[J]. 中国化学工程学报, 2023, 58(6): 341-354.
[10]	Kai Xue, Yanchun Xue, Jing Wang, Shuya Zhang, Xingmei Guo, Xiangjun Zheng, Fu Cao, Qinghong Kong, Junhao Zhang, Zhong Jin. KOH-assisted aqueous synthesis of ZIF-67 with high-yield and its derived cobalt selenide/carbon composites for high-performance Li-ion batteries[J]. 中国化学工程学报, 2023, 57(5): 214-223.
[11]	Yueting Shi, Junhai Zhao, Lingli Chen, Hongru Li, Shengtao Zhang, Fang Gao. Double open mouse-like terpyridine parts based amphiphilic ionic molecules displaying strengthened chemical adsorption for anticorrosion of copper in sulfuric acid solution[J]. 中国化学工程学报, 2023, 57(5): 233-246.
[12]	Aneela Sabir, Wail Falath, Muhammad Shafiq, Nafisa Gull, Maria Wasim, Karl I. Jacob. Effective desalination and anti-biofouling performance via surface immobilized MWCNTs on RO membrane[J]. 中国化学工程学报, 2023, 56(4): 33-45.
[13]	Xia Xiong, Zuohua Liu, Changyuan Tao, Yundong Wang, Fangqin Cheng, Hong Li. Reduced power consumption in stirred vessel with high solid loading by equipping punched baffles[J]. 中国化学工程学报, 2023, 56(4): 203-214.
[14]	Tinghao Jia, Yunbo Yu, Qing Liu, Yao Yang, Ji-Jun Zou, Xiangwen Zhang, Lun Pan. Theoretical and experimental study on the inhibition of jet fuel oxidation by diarylamine[J]. 中国化学工程学报, 2023, 56(4): 225-232.
[15]	Xinhao Li, Qing Ye, Jinlong Li, Lingqiang Yan, Xue Jian, Licheng Xie, Jianyu Zhang. Investigation of energy-efficient heat pump assisted heterogeneous azeotropic distillation for separating of acetonitrile/ethyl acetate/n-hexane mixture[J]. 中国化学工程学报, 2023, 55(3): 20-33.