工业级催化重整装置的全流程模拟与优化

• SYSTEM ENGINEERING • 上一篇下一篇

工业级催化重整装置的全流程模拟与优化

侯卫锋; 苏宏业; 胡永有; 褚健

National Laboratory of Industrial Control Technology, Institute of Advanced Process Control, Zhejiang University, Hangzhou 310027, China

收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2006-10-28 发布日期:2006-10-28
通讯作者: 侯卫锋

Modeling, Simulation and Optimization of a Whole Industrial Cata-lytic Naphtha Reforming Process on Aspen Plus Platform

HOUWeifeng; SUHongye; HUYongyou; CHUJian

National Laboratory of Industrial Control Technology, Institute of Advanced Process Control, Zhejiang University, Hangzhou 310027, China

Received:1900-01-01 Revised:1900-01-01 Online:2006-10-28 Published:2006-10-28
Contact: HOU Weifeng

摘要/Abstract

摘要： A new 18-lump kinetic model for naphtha catalytic reforming reactions is discussed. By developing this model as a user module, a whole industrial continuous catalytic reforming process is simulated on Aspen plus platform. The technique utilizes the strong databases, complete sets of modules, and flexible simulation tools of the Aspen plus system and retains the characteristics of the proposed kinetic model. The calculated results are in fair agreement with the actual operating data. Based on the model of the whole reforming process, the process is optimized and the optimization results are tested in the actual industrial unit for about two months. The test shows that the process profit increases about 1000yuan•h－1 averagely, which is close to the calculated result.

关键词: catalytic reforming;kinetic model;Aspen plus;computer simulation;process optimization

Abstract: A new 18-lump kinetic model for naphtha catalytic reforming reactions is discussed. By developing this model as a user module, a whole industrial continuous catalytic reforming process is simulated on Aspen plus platform. The technique utilizes the strong databases, complete sets of modules, and flexible simulation tools of the Aspen plus system and retains the characteristics of the proposed kinetic model. The calculated results are in fair agreement with the actual operating data. Based on the model of the whole reforming process, the process is optimized and the optimization results are tested in the actual industrial unit for about two months. The test shows that the process profit increases about 1000yuan•h－1 averagely, which is close to the calculated result.

Key words: catalytic reforming, kinetic model, Aspen plus, computer simulation, process optimization

侯卫锋, 苏宏业, 胡永有, 褚健. 工业级催化重整装置的全流程模拟与优化[J]. , DOI: .

HOUWeifeng, SUHongye, HUYongyou, CHUJian. Modeling, Simulation and Optimization of a Whole Industrial Cata-lytic Naphtha Reforming Process on Aspen Plus Platform[J]. , DOI: .

参考文献

1    Hu, Y.Y., Su, H.Y., Chu, J., “The research summarize of catalytic reforming unit simulation”, Contr. Instrum. Chem. Ind., 29(2), 19—23(2002). (in Chinese)
2    Ye, Q.L., Ying, W.Y., Fang, D.Y., “Simulation and design optimization of ammonia synthesis converter”, Chin. J. Chem. Eng., 9(4), 441—446(2001).
3    Mu, S.J., Su, H.Y., Gu, Y., Chu, J., “Multi-objective op-timization of industrial purified terephthalic acid oxida-tion process”, Chin. J. Chem. Eng., 11(5), 536—541(2003).
4    Smith, R.B., “Kinetic analysis of naphtha reforming with platinum catalyst”, Chem. Eng. Progress, 55(6), 76—80(1959).
5    Ramage, M.P., Graziani, K.R., Krambeck, F.J., “Devel-opment of Mobil’s kinetic reforming model”, Chem. Eng. Sci., 35, 41—48(1980).
6    Padmavathi, G., Chaudhuri, K.K., “Modeling and si- mulation of commercial catalytic naphtha reformers”, Can. J. Chem. Eng., 50, 930—937(1997).
7    Taskar, U., Riggs, J.B., “Modeling and optimization of a semiregenerative catalytic naphtha reformer”, AIChE J., 43, 740—753(1997).
8    Ancheyta-Juárez, J., Villafuerte-Macías, E., “Kinetic modeling of naphtha catalytic reforming reactions”, En-ergy Fuels, 14, 1032—1037(2000).
9    Rahimpour, M.R., Esmaili, S., Bagheri, G.N.A., “Kinetic and deactivation model for industrial catalytic naphtha reforming”, Iran. J. Sci. Tech., Trans. B: Tech., 27, 279—290(2003).
10    Weng, H.X., Sun, S.Z., Jiang, H.B., “Lumped model for catalytic reforming (Ⅰ) Establishment of the model”, J.  Chem. Ind. Eng., 45(4), 407—412(1994). (in Chinese)
11    Weng, H.X., Jiang, H.B., Chen, J., “Lumped model for catalytic reforming (Ⅱ) Experiment design and kinetic parameter estimation”, J. Chem. Ind. Eng., 45(5), 531—537(1994). (in Chinese)
12    Xie, X.A., Peng, S.H., Liu, T.J., “Establishment and commercial application of kinetics models for catalytic reforming reactions (1) —Establishment of physical model”, Petro. Ref. Eng., 25(6), 49—51(1995). (in Chi-nese)
13    Zhou, Q.H., Hu, S.Y., Li, Y.R., Shen, J.Z., Wei, Z.W., “Molecular modeling and optimization for catalytic re-forming”, Comput. Appl. Chem., 21(3), 447—452(2004). (in Chinese)
14    Hu, Y.Y., Su, H.Y., Chu, J, “Modeling and simulation of commercial catalytic reformers”, J. Chem. Eng. Chin. Univ., 17, 418—424(2003). (in Chinese)
15    Marin, G.B., Froment, G.F., “Reforming of C6 hydrocar-bons on a Pt/Al2O3 catalyst”, Chem. Eng. Sci., 37(5),  759—773(1982)
16    Trimpont, P.A.V., Marin, G.B., Froment, G.F., “Reform-ing of C7 hydrocarbons on a sulfided commercial Pt/Al2O3 catalyst”, Ind. Eng. Chem. Res., 27, 51—57(1988).
17    Lenkins, J.H., Stephens, T.W., “Kinetics of cat reform-ing”, Hydrocarbon Process., 163—167(1980).
18    Hu, Y.Y., Xu, W.H., Hou, W.F., Su, H.Y., Chu, J, “Dy-namic modeling and simulation of a commercial naphtha catalytic reforming process”, Chin. J. Chem. Eng., 13(1), 74—80(2005).
19    Deng, Z.L., Optimization Method in Chemical Engi-neering, Chemical Industry Press, Beijing (1992).