一种用于显著误差检测与数据校正的NT-MT组合算法

• SYSTEM ENGINEERING • 上一篇下一篇

一种用于显著误差检测与数据校正的NT-MT组合算法

梅从立^a,b;苏宏业^a; 褚健^a

^a National Laboratory of Industry Technology, Institute of Advanced Process Control, Zhejiang University, Hang-zhou 310027, China
^b Jiangsu University, Zhenjiang 212013, China

收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2006-10-28 发布日期:2006-10-28
通讯作者: 梅从立

An NT-MT Combined Method for Gross Error Detection and Data Reconciliation

MEICongli^a,b;SUHongye^a; CHUJian^a

^a National Laboratory of Industry Technology, Institute of Advanced Process Control, Zhejiang University, Hang-zhou 310027, China
^b Jiangsu University, Zhenjiang 212013, China

Received:1900-01-01 Revised:1900-01-01 Online:2006-10-28 Published:2006-10-28
Contact: MEI Congli

摘要/Abstract

摘要： An NT-MT combined method based on nodal test (NT) and measurement test (MT) is developed for gross error detection and data reconciliation for industrial application. The NT-MT combined method makes use of both NT and MT tests and this combination helps to overcome the defects in the respective methods. It also avoids any artificial manipulation and eliminates the huge combinatorial problem that is created in the combined method based on the nodal test in the case of more than one gross error for a large process system. Serial compensation strategy is also used to avoid the decrease of the coefficient matrix rank during the computation of the proposed method. Simulation results show that the proposed method is very effective and possesses good performance.

关键词: data reconciliation;gross error detection;measurement test;nodal test

Abstract: An NT-MT combined method based on nodal test (NT) and measurement test (MT) is developed for gross error detection and data reconciliation for industrial application. The NT-MT combined method makes use of both NT and MT tests and this combination helps to overcome the defects in the respective methods. It also avoids any artificial manipulation and eliminates the huge combinatorial problem that is created in the combined method based on the nodal test in the case of more than one gross error for a large process system. Serial compensation strategy is also used to avoid the decrease of the coefficient matrix rank during the computation of the proposed method. Simulation results show that the proposed method is very effective and possesses good performance.

Key words: data reconciliation, gross error detection, measurement test, nodal test

梅从立,苏宏业, 褚健. 一种用于显著误差检测与数据校正的NT-MT组合算法[J]. , DOI: .

MEICongli,SUHongye, CHUJian. An NT-MT Combined Method for Gross Error Detection and Data Reconciliation[J]. , DOI: .

参考文献

1    Relly, P., Carpani, R., “Application if statistical theory of adjustments to material balances”, In: Proceedings of the 13th Canadian Chemical Engineering Conference, Mont-real Qebec (1963).
2    Mah, R.S.H., Tamhane, A.C., “Detection of gross errors in process data” , AIChE J., 28, 828—830(1982).
3    Mah, R.S.H., Staneley, G., Downing, D., “Reconciliation and rectification of process flow and inventory data”, Ind. Eng. Chem. Process Des. Dev., 15, 175—183(1976).
4    Narasimhan, S., Mah, R.S.H., “Generalized likelihood ratio method for gross error identification”, AIChE J., 33, 1514—1521(1987).
5    Tong, H., Crowe, C. M., “Detection of gross errors in reconciliation by principal component analysis”,  AIChE J., 41(7), 1712—1722(1995).
6    Crowe, C. M., “The maximum-power test for gross er-rors in original constraints in data reconciliation”, Can. J. Chem. Eng., 70(10), 1030—1036(1992).
7    Yang, Y., Teng, R., “Gross error detection and data rec-onciliation in process industrial”, J. Chem. Ind. Eng., 47(2), 248—253(1996). (in Chinese)
8    Wang, F., Jia, X., Zheng, S., Yue, J., “An improved MT-NT method for gross error detection and data recon-ciliation.”, Comput. Chem. Eng., 28, 2189—2192(2004).
9    Crowe, C.M, Garcia Campos, Y.A., Hrymak. A., “Rec-onciliation of process flow rates by matrix projection (Ⅰ) linear case”,  AIChE J., 29(6), 881—888(1983).
10    Serth, R., Hennan, W., “Gross error detection and data reconciliation in steam metering system”, AIChE J., 32, 733—742(1986).
11    Kim, I., Kang, M., Park, S., Edgar, T., “Robust data rec-onciliation and gross error detection: the modified MIMT using NLP”, Comput. Chem. Eng., 21(7), 775—782(1997).
12    Sanchez, M., Romagnoli, J., Jiang, Q., Bagajewicz, M., “Simultaneous estimation of biases and leak in process plants ”, Comput. Chem. Eng., 23, 841—857(1999).