[1] B.A. Toms, Some observation on the flow of linear polymer solutions through straight tubes at large Reynolds number, Proc. 1st. Int. Congr. on Rheology, Pt. 2, North Holland, Amsterdam1948. [2] D. Mowla, M.S. Hatamipour, M. Moshfeghian, The effect of polymer solutions on drag reduction in horizontal two-phase flow, Int. J. Eng. Anal. Des. 2 (1995) 97-105. [3] D. Mowla, A. Naderi, Experimental study of drag reduction by a polymeric additive in slug two-phase flow of crude oil and air in horizontal pipes, Chem. Eng. Sci. 61 (2006) 1549-1554. [4] D. Mowla, M.S. Hatamipour, M. Moshfeghian, The effect of dilute polymer solutions on drag reduction in single phase flow, Int. J. Sci.Tech. 16 (1) (1991) 97-104. [5] M. Dass, C. Kang, W.P. Jepson, Quantitative analysis of drag reduction in horizontal slug flow, SPE, 2000. 62944. [6] S.Q. Yang, G. Dou, Turbulent drag reduction with polymer additive in rough pipes, J. Fluid Mech. 642 (2010) 279-294. [7] F.C. Li, Y. Kawaguchi, B. Yu, J.J.Wei, K. Hishida, Experimental study of drag reduction mechanism for a dilute surfactant solution flow, Int. J. Heat Mass Transfer 51 (2008) 835-843. [8] A. Gyr, J. Bühler, Secondary flows in turbulent surfactant solutions atmaximum drag reduction, J. Non-Newtonian Fluid Mech. 165 (2010) 672-675. [9] R.D. Liu, X.C.Wei, D.H. Tao, Y. Zhao, Study of preparation and tribological properties of rare earth nanoparticles in lubricating oil, Tribol. Int. 43 (2010) 1082-1086. [10] H. Garbacz, M. Gradzka-Dahlke, K.J. Kurzydłowski, The tribological properties of nano-titanium obtained by hydrostatic extrusion, Wear 263 (2007) 572-578. [11] K.H. Hu, J.Wang, S. Schraube, Y.F. Xu, X.G. Hu, R. Stengler, Tribological properties of MoS2 nano-balls as filler in polyoxymethylene-based composite layer of three-layer self-lubrication bearing materials, Wear 266 (2009) 1198-1207. [12] Y.Y. Wu, W.C. Tsui, T.C. Liu, Experimental analysis of tribological properties of lubricating oils with nanoparticle additives, Wear 262 (2007) 819-825. [13] K.H. Hu, J.Wang, S. Schraube, Y.F. Xu, X.G. Hu, R. Stengler, Tribological properties of MoS2 nano-balls as filler in polyoxymethylene-based composite layer of three-layer self-lubrication bearing materials, Wear 266 (2009) 1198-1207. [14] X.H. Li, Z. Cao, Z.J. Zhang, H.X. Dang, Surface-modification in situ of nano-SiO2 and its structure and tribological properties, Appl. Surf. Sci. 252 (2006) 7856-7861. [15] D.X. Peng, Y. Kang, R.M. Hwang, S.S. Shyr, Y.P. Chang, Tribological properties of diamond and SiO2 nanoparticles added in paraffin, Tribol. Int. 42 (2009) 911-917. [16] M. Drzazga, A. Gierczycki, G. Dzido,M. Lemanowicz, Influence of nonionic surfactant addition on drag reduction ofwater based nanofluid in a small diameter pipe, Chin. J. Chem. Eng. 21 (1) (2013) 104-108. [17] M.S. Hosseini, A. Mohebbi, S. Ghader, Correlation of shear viscosity of nanofluids using the local composition theory, Chin. J. Chem. Eng. 18 (1) (2010) 102-107. [18] H. Xie, H. Lee,W. Youn, M. Choi, Nanofluids containing multi-walled carbon nanotubes and their enhanced thermal conductivities, J. Appl. Phys. 94 (2003) 4967-4972. [19] G.S.Wang, R. Bao, Two-phase flow patterns of nitrogen and nanofluids in a vertically capillary tubes, Int. J. Therm. Sci. 48 (2009) 2074-2079. |