Determination of physical properties for the mixtures of [BMIM]Cl with different organic solvents

doi:10.1016/j.cjche.2014.06.039

摘要/Abstract

摘要： Physical properties including refractive index, density, viscosity and conductivity for binary mixtures of 1-butyl-3-methyl imidazolium chloride ([BMIM]Cl) and different organic solvents at 298.15 K have been investigated. Excess molar volumes have been calculated and obtained data has been fitted by the Redlich-Kister equation. The density and refractive index were found to increase with increasing concentration of [BMIM]Cl, however, exceptions do exist as in the case of dimethyl sulfoxide (DMSO)/[BMIM]Cl. For DMSO/[BMIM]Cl, the density decreases with increasing concentration. The addition of different organic solvents was able to disrupt the interactions within mixtures, leading to freemobility of ions. The freemobility of ions has been found to enhance conductivity and decrease viscosity to varying extents in allmixtures studied. It has been observed that solubility parameters, dielectric constants and composition of the solvents used play a vital role in determining the resultant properties. The data obtainedwill play an important role in understanding the effect of the addition of organic solvents in ILs to enhance their applicability.

关键词: Ionic liquid, Viscosity, Conductivity, Refractive index, Density, Binary mixtures, Organic solvents

Abstract: Physical properties including refractive index, density, viscosity and conductivity for binary mixtures of 1-butyl-3-methyl imidazolium chloride ([BMIM]Cl) and different organic solvents at 298.15 K have been investigated. Excess molar volumes have been calculated and obtained data has been fitted by the Redlich-Kister equation. The density and refractive index were found to increase with increasing concentration of [BMIM]Cl, however, exceptions do exist as in the case of dimethyl sulfoxide (DMSO)/[BMIM]Cl. For DMSO/[BMIM]Cl, the density decreases with increasing concentration. The addition of different organic solvents was able to disrupt the interactions within mixtures, leading to freemobility of ions. The freemobility of ions has been found to enhance conductivity and decrease viscosity to varying extents in allmixtures studied. It has been observed that solubility parameters, dielectric constants and composition of the solvents used play a vital role in determining the resultant properties. The data obtainedwill play an important role in understanding the effect of the addition of organic solvents in ILs to enhance their applicability.

Key words: Ionic liquid, Viscosity, Conductivity, Refractive index, Density, Binary mixtures, Organic solvents

Hina Saba, Xinjun Zhu, Ye Chen, Yumei Zhang. Determination of physical properties for the mixtures of [BMIM]Cl with different organic solvents[J]. Chinese Journal of Chemical Engineering, 2015, 23(5): 804-811.

Hina Saba, Xinjun Zhu, Ye Chen, Yumei Zhang. Determination of physical properties for the mixtures of [BMIM]Cl with different organic solvents[J]. Chin.J.Chem.Eng., 2015, 23(5): 804-811.

参考文献

[1] B. Kirchner, Ionic Liquids, Springer, New York, 2010.

[2] R.D. Rogers, K.R. Seddon, Ionic liquids. Industrial applications to green chemistry, American Chemical Society Symposium Series 818, 2002 (USA).

[3] T. Welton, Room-temperature ionic liquids. Solvents for synthesis and catalysis, Chem. Rev. 99 (1999) 2071-2084.

[4] P. Wasserscheid, W. Keim, Ionic liquids—New solutions for transition metal catalysis, Angew. Chem. Int. Ed. 39 (2000) 3772-3789.

[5] C.M. Gordon, New developments in catalysis using ionic liquids, Appl. Catal. A 222 (2001) 101-117.

[6] D. Zhao, M.Wu, Y. Kou, E.Min, Ionic liquids: Applications in catalysis, Catal. Today 74 (2002) 157-189.

[7] J. Dupont, R.F. de Souza, P.A.Z. Suarez, Ionic liquid (molten salt) phase organometallic catalysis, Chem. Rev. 102 (2002) 3667-3692.

[8] N.V. Plechkova, R.D. Rogers, K.R. Seddon, Ionic Liquids: From Knowledge to Application, Oxford University Press, USA, 2010.

[9] M.J. Earle, K.R. Seddon, Ionic liquids. Green solvents for the future, Pure Appl. Chem. 72 (2000) 1391-1398.

[10] K.R. Seddon, A. Stark, M.J. Torres, Influence of chloride, water, and organic solvents on the physical properties of ionic liquids, Pure Appl. Chem. 72 (2000) 2275-2287.

[11] S. Zhang, X. Li, H. Chen, J. Wang, J. Zhang, M. Zhang, Determination of physical properties for the binary system of 1-ethyl-3-methylimidazolium tetrafluoroborate + H₂O, J. Chem. Eng. Data 49 (2004) 760-764.

[12] D.Wu, B.Wu, Y.M. Zhang, H.P. Wang, Chloride + water mixture, J. Chem. Eng. Data 55 (2010) 621-624.

[13] H. Xu, D. Zhao, P. Xu, F. Liu, G. Gao, Conductivity and viscosity of 1-allyl-3-methylimidazolium chloride + water and +ethanol from 293.15 K to 333.15 K, J. Chem. Eng. Data 50 (2005) 133-135.

[14] E. Gómez, B. González, Á. Domínguez, E. Tojo, J. Tojo, Dynamic viscosities of a series of 1-alkyl-3-methylimidazolium chloride ionic liquids and their binary mixtures with water at several temperatures, J. Chem. Eng. Data 51 (2006) 696-701.

[15] H. Shekaari, F. Jebali, Densities, viscosities, electrical conductances, and refractive indices of amino acid + ionic liquid ([BMIM]Br) + water mixtures at 298.15 K, J. Chem. Eng. Data 55 (2010) 2517-2523.

[16] W. Liu, L. Cheng, Y. Zhang, H.Wang,M. Yu, The physical properties of aqueous solution of room temperature ionic liquids based on imidazolium: Database and evaluation, J. Mol. Liq. 140 (2008) 68-72.

[17] A. Heintz, D. Klasen, J.K. Lehmann, Excess molar volumes and viscosities of binary mixtures of methanol and the ionic liquid 4-methyl-n-butylpyridinium tetrafluoroborate at 25, 40, and 50 ℃, J. Solut. Chem. 31 (2002) 467-476.

[18] E.J. González, L. Alonso, A. Domínguez, Physical properties of binary mixtures of the ionic liquid 1-methyl-3-octylimidazolium chloride with methanol, ethanol, and 1-propanol at T = (298.15, 313.15, and 328.15) K and at P = 0.1 MPa, J. Chem. Eng. Data 51 (2006) 1446-1452.

[19] J. Wang, Y. Tian, K. Zhuo, A volumetric and viscosity study for the mixtures of 1-nbutyl-3-methylimidazolium tetrafluoroborate ionic liquid with acetonitrile, dichloromethane, 2-butanone and N,N-dimethylformamide, Green Chem. 5 (2003) 618-622.

[20] A. Arce, E. Rodil, A. Soto, Physical and excess properties for binary mixtures of 1-methyl-3-octylimidazoliumtetrafluoroborate, [OMIM][BF₄], ionic liquid with different alcohols, J. Solut. Chem. 35 (2006) 63-78.

[21] C. Comminges, R. Barhdadi, M. Laurent,M. Troupel, Determination of viscosity, ionic conductivity, and diffusion coefficients in some binary systems: Ionic liquids +molecular solvents, J. Chem. Eng. Data 51 (2006) 680-685.

[22] Y. Geng, T. Wang, D. Yu, C. Peng, H. Liu, Y. HU, Densities and viscosities of the ionic liquid [C₄MIM][PF₆] + N,N-dimethylformamide binary mixtures at 293.15 K to 318.15 K, Chin. J. Chem. Eng. 16 (2008) 256-262.

[23] M.G. Rybczyńska, A. Heintz, J.K. Lehmann, A. Golus, Volumetric properties of binary mixtures containing ionic liquids and some aprotic solvents, J. Chem. Eng. Data 55 (2010) 4114-4120.

[24] M.A. Iglesias-Otero, J. Troncoso, E. Carballo, L. Romaný, Density and refractive index in mixtures of ionic liquids and organic solvents: Correlations and predictions, J. Chem. Thermodyn. 40 (2008) 949-956.

[25] Y. Umebayashi, J.C. Jiang, K.H. Lin, Y.L. Shan, K. Fujii, S. Seki, S.I. Ishiguro, S.H. Lin, H.C. Chang, Solvation and microscopic properties of ionic liquid/acetonitrile mixtures probed by high-pressure infrared spectroscopy, J. Chem. Phys. 131 (2009) 234502-1-234502-7.

[26] K.N. Marsh, J.A. Boxall, R. Lichtenthaler, Room temperature ionic liquids and their mixtures—A review, Fluid Phase Equilib. 219 (2004) 93-98.

[27] K.N. Marsh, A. Deer, A.C.T.Wu, E. Tran, A. Klamt, Room temperature ionic liquids as replacements for conventional solvents—A review, Korean J. Chem. Eng. 19 (2002) 357-362.

[28] C. Chiappe, D. Pieraccini, Ionic liquids: Solvent properties and organic reactivity, J. Phys. Org. Chem. 18 (2005) 275-297.

[29] J.L. Wertz, O. Bédué, J.P. Mercier, Cellulose Science and Technology, EPFL Press, 2010.

[30] J.G. Huddleston, A.E. Visser, W.M. Reichert, H.D. Willauer, G.A. Broker, R.D. Rogers, Characterization and comparison of hydrophilic and hydrophobic roomtemperature ionic liquids incorporating the imidazolium cation, Green Chem. 3 (2001) 156-164.

[31] J. Jacquemin, P. Husson, A.A.H. Padua, V.Majer, Density and viscosity of several pure and water-saturated ionic liquids, Green Chem. 8 (2006) 172-180.

[32] A.B. Pereiro, E. Tojo, A. Rodríguez, J. Canosa, J. Tojo, Properties of ionic liquid HMIMPF6 with carbonates, ketones and alkyl acetates, J. Chem. Thermodyn. 38 (2006) 651-661.

[33] K.A. Kurnia, B. Ariwahjoedi, M.I. Abdul Mutalib, T. Murugesan, Density and excess molar volume of the protic ionic liquid bis(2-hydroxyethyl)ammonium acetate with alcohols, J. Solut. Chem. 40 (2004) 470-480.

[34] O. Iulian, O. Ciocirlan, Volumetric properties of binary mixtures of two 1 alkyl-3-methylimidazolium tetrafluoroborate ionic liquids with molecular solvents, J. Chem. Eng. Data 57 (2012) 2640-2646.

[35] Q. Zhou, Y. Song, Y. Yu, H. He, S. Zhang, Density and excess molar volume for binary mixtures of naphthenic acid ionic liquids and ethanol, J. Chem. Eng. Data 55 (2010) 1105-1108.

[36] P. Bhujrajh, N. Deenadayalu, Liquid densities and excess molar volumes for binary systems (ionic liquids + methanol or water) at 298.15, 303.15 and 313.15 K and at atmospheric pressure, J. Solut. Chem. 36 (2007) 631-642.

[37] T.Y. Wu, B.K. Chen, L. Hao, Y.C. Lin, H.P. Wang, C.W. Kuo, I.W. Sun, Physicochemical properties of glycine-based ionic liquid [QuatGly-OEt][EtOSO₃](2-ethoxy-1-ethyl-1,1-dimethyl-2-oxoethanaminium ethyl sulfate) and its binary mixtures with poly(ethylene glycol) (M_w = 200) at various temperatures, Int. J. Mol. Sci. 12 (2011) 8750-8772.

[38] U.S. Vural, V. Muradoglu, S. Vural, Excess molar volumes, and refractive index of binary mixtures of glycerol + methanol and glycerol + water at 298.15 K and 303.15 K, Bull. Chem. Soc. Ethiop. 25 (2011) 111-118.

[39] S.C. Bhatia, J. Sangwan, R. Rani, R. Bhatia, Densities, viscosities, speeds of sound, and refractive indices of binary mixtures of 2-octanol with chlorobenzenes, Int. J. Thermophys. 32 (2011) 2027-2039.

[40] W. Li, Z. Zhang, J. Zhang, B. Han, B.Wang, M. Hou, Y. Xie,Micropolarity and aggregation behavior in ionic liquid + organic solvent solutions, Fluid Phase Equilib. 248 (2006) 211-216.

[41] K.A. Kurnia, M.M. Taib, M.I. Abdul Mutalib, T. Murugesan, Densities, refractive indices and excess molar volumes for binarymixtures of protic ionic liquids with methanol at T = 293.15 to 313.15 K, J. Mol. Liq. 159 (2011) 211-219.

[42] M. Anouti, A. Vigeant, J. Jacquemin, C. Brigouleix, D. Lemordant, Volumetric properties, viscosity and refractive index of the protic ionic liquid, pyrrolidiniumoctanoate, in molecular solvents, J. Chem. Thermodyn. 42 (2010) 834-845.

[43] Q.G. Zhang, S.S. Sun, S. Pitula, Q.S. Liu, U. Welz-Biermann, J.J. Zhang, Electrical conductivity of solutions of ionic liquids with methanol, ethanol, acetonitrile, and propylene carbonate, J. Chem. Eng. Data 56 (2011) 4659-4664.

[44] A. Stoppa, J. Hunger, R. Buchner, Conductivities of binary mixtures of ionic liquids with polar solvents, J. Chem. Eng. Data 54 (2009) 472-479.

[45] H. Every, A.G. Bishop, M. Forsyth, D.R. MacFarlane, Ion diffusion in molten salt mixtures, Electrochim. Acta 45 (2000) 1279-1284.

[46] O. Ciocirlan, O. Croitoru, O. Iulian, Densities and viscosities for binary mixtures of 1-butyl-3-methylimidazolium tetrafluoroborate ionic liquid with molecular solvents, J. Chem. Eng. Data 56 (2011) 1526-1534.

[47] M.T. Zafarani-Moattar, R. Majdan-Cegincara, Viscosity, density, speed of sound, and refractive index of binary mixtures of organic solvent + ionic liquid, 1-butyl-3-methylimidazolium hexafluorophosphate at 298.15 K, J. Chem. Eng. Data 52 (2007) 2359-2364.

[48] J.O.M. Bockris, A.K.N. Reddy, Modern Electrochemistry I, Plenum Press, New York, 1998.

[49] E.O. Croitoru, O. Ciocîrlan, O. Iulian, Transport properties of binary mixtures of 1-butyl-3-methylimidazolium tetrafluoroborate with some organic solvents at 298.15 K, U. P. B. Sci. Bull. Ser. B 73 (2011) 85-92.

[50] H.A. Zarei, M.Z. Lavasani, H. Iloukhani, Densities and volumetric properties of binary and ternary liquid mixtures of water (1) + acetonitrile (2) + dimethyl sulfoxide (3) at temperatures from (293.15 to 333.15) K and at ambient pressure (81.5 kPa), J. Chem. Eng. Data 53 (2008) 578-585.

[51] A.Z. Tasic, D.K. Grozdanib, B.D. Djordjevib, S.P. Serbanovib, Refractive indices and densities of the system acetone + benzene + cyclohexane at 298.15 K, J. Chem. Eng. Data 40 (1995) 586-588.

[52] C. Gonzalez, M. Iglesias, J. Lanz, G. Marino, B. Orge, J.M. Resa, Temperature influence on refractive indices and isentropic compressibilities of alcohol (C2-C4) + olive oil mixtures, J. Food Chem. 50 (2001) 29-40.

[53] K.A. Kurnia,M.I. Abdul Mutalib, T. Murugesan, B. Ariwahjoedi, Physicochemical properties of binarymixtures of the protic ionic liquid bis(2-hydroxyethyl)methylammonium formate with methanol, ethanol, and 1-propanol, J. Solut. Chem. 40 (2011) 818-831.

[54] C.M. Kinart, W.J. Kinart, A.C.Wiklińska, Density and viscosity at various temperatures for 2-methoxyethanol + acetone mixtures, J. Chem. Eng. Data 47 (2002) 76-78.

[55] C.M. Hansen, The Three Dimensional Solubility Parameter and Solvent Diffusion Coefficient: Their Importance in Surface Coating Formulation, Copenhagen Danish Technical Press, 1967.