SCI和EI收录∣中国化工学会会刊

中国化学工程学报 ›› 2020, Vol. 28 ›› Issue (5): 1250-1259.DOI: 10.1016/j.cjche.2019.01.035

• Separation Science and Engineering • 上一篇    下一篇

Performance evaluation of a bubble generator and a bubble separator designed for the gas removal system of a small thorium molten salt reactor

Licheng Sun, Liang Zhao, Min Du, Zhengyu Mo, Jiguo Tang, Guo Xie   

  1. State Key Laboratory of Hydraulics and Mountain River Engineering, College of Water Resource&Hydropower, Sichuan University, Chengdu 610065, China
  • 收稿日期:2018-12-16 修回日期:2019-01-29 出版日期:2020-05-28 发布日期:2020-07-29
  • 通讯作者: Liang Zhao
  • 基金资助:
    We are grateful to financial support from the National Natural Science Foundation of China (51706149, 51709191, 51606130), and the China Postdoctoral Science Foundation (2018M643474).

Performance evaluation of a bubble generator and a bubble separator designed for the gas removal system of a small thorium molten salt reactor

Licheng Sun, Liang Zhao, Min Du, Zhengyu Mo, Jiguo Tang, Guo Xie   

  1. State Key Laboratory of Hydraulics and Mountain River Engineering, College of Water Resource&Hydropower, Sichuan University, Chengdu 610065, China
  • Received:2018-12-16 Revised:2019-01-29 Online:2020-05-28 Published:2020-07-29
  • Contact: Liang Zhao
  • Supported by:
    We are grateful to financial support from the National Natural Science Foundation of China (51706149, 51709191, 51606130), and the China Postdoctoral Science Foundation (2018M643474).

摘要: In the present study, a bubble generator and a bubble separator were designed and evaluated for an independent off-gas removal system of a small thorium molten salt reactor (TMSR) with reference to the design of the Oak Ridge National Laboratory (ONRL). The bubble generator employed a Venturi tube as its main body owing to its simplicity and highly reliable structure. A centrifugal separator was used as the bubble separator, taking advantage of the kinetic energy of fluid to create a centrifugal force to separate gas bubbles from the mixture flow. Both the bubble generator and the separator were demonstrated to have good potential to meet the performance requirements of an off-gas removal system for a small TMSR. With water and air as the working fluids, for the final designs of the two key pieces of equipment, a liquid flow rate exceeding 15 m3·h-1 can essentially make their performance meet the requirements of the off-gas removal system in terms of the average size of the generated bubbles and gas separation efficiency.

关键词: Bubble generator, Venturi, Bubble separator, Off-gas removal, TMSR

Abstract: In the present study, a bubble generator and a bubble separator were designed and evaluated for an independent off-gas removal system of a small thorium molten salt reactor (TMSR) with reference to the design of the Oak Ridge National Laboratory (ONRL). The bubble generator employed a Venturi tube as its main body owing to its simplicity and highly reliable structure. A centrifugal separator was used as the bubble separator, taking advantage of the kinetic energy of fluid to create a centrifugal force to separate gas bubbles from the mixture flow. Both the bubble generator and the separator were demonstrated to have good potential to meet the performance requirements of an off-gas removal system for a small TMSR. With water and air as the working fluids, for the final designs of the two key pieces of equipment, a liquid flow rate exceeding 15 m3·h-1 can essentially make their performance meet the requirements of the off-gas removal system in terms of the average size of the generated bubbles and gas separation efficiency.

Key words: Bubble generator, Venturi, Bubble separator, Off-gas removal, TMSR