Research on cigarette during smoking based on reverse engineering and numerical simulation

doi:10.1016/j.cjche.2019.04.020

中国化学工程学报 ›› 2019, Vol. 27 ›› Issue (10): 2359-2375.DOI: 10.1016/j.cjche.2019.04.020

• Fluid Dynamics and Transport Phenomena • 上一篇下一篇

Research on cigarette during smoking based on reverse engineering and numerical simulation

Darong Tang¹, Junzhang Wu², Jinsong Zeng¹, Wenhua Gao¹, Liang Du¹

1 State Key Laboratory of Pulp and Paper Engineering, Plant Micro/Nano Fiber Research Center, South China University of Technology, Guangzhou 510640, China;
2 China Tobacco Guangdong Industrial Co. Ltd., Guangzhou 510385, China

收稿日期:2018-03-27 修回日期:2019-04-09 出版日期:2019-10-28 发布日期:2020-01-17
通讯作者: Jinsong Zeng
基金资助:
Supported by the National Key Research and Development Program of China (2017YFB0307902) and Science and Technology Planning Project of Guangdong Province (2015B020241001).

Research on cigarette during smoking based on reverse engineering and numerical simulation

Darong Tang¹, Junzhang Wu², Jinsong Zeng¹, Wenhua Gao¹, Liang Du¹

1 State Key Laboratory of Pulp and Paper Engineering, Plant Micro/Nano Fiber Research Center, South China University of Technology, Guangzhou 510640, China;
2 China Tobacco Guangdong Industrial Co. Ltd., Guangzhou 510385, China

Received:2018-03-27 Revised:2019-04-09 Online:2019-10-28 Published:2020-01-17
Contact: Jinsong Zeng
Supported by:
Supported by the National Key Research and Development Program of China (2017YFB0307902) and Science and Technology Planning Project of Guangdong Province (2015B020241001).

摘要/Abstract

摘要： The three-dimensional (3D) model of cigarette was accurately constructed through reverse engineering as the research object of numerical simulation. The combustion process of cigarette was studied with computational fluid dynamics (CFD). Standard Laminar models with species transport approach were applied, and numerical simulation of the cigarette was analyzed with semi-implicit method for pressure-velocity coupling. The results showed that the model could predict velocity of cigarette smoke, the distributions of temperature and pressure at different times. In order to verify the correctness of model, it was found that the relationship between the velocity of smoke and pressure according to Darcy's law on z position (x=4 mm, y=0, 0 mm ≤ z ≤ 50.61 mm).

关键词: Cigarette, Reverse engineering, Computational fluid dynamics

Abstract: The three-dimensional (3D) model of cigarette was accurately constructed through reverse engineering as the research object of numerical simulation. The combustion process of cigarette was studied with computational fluid dynamics (CFD). Standard Laminar models with species transport approach were applied, and numerical simulation of the cigarette was analyzed with semi-implicit method for pressure-velocity coupling. The results showed that the model could predict velocity of cigarette smoke, the distributions of temperature and pressure at different times. In order to verify the correctness of model, it was found that the relationship between the velocity of smoke and pressure according to Darcy's law on z position (x=4 mm, y=0, 0 mm ≤ z ≤ 50.61 mm).

Key words: Cigarette, Reverse engineering, Computational fluid dynamics

Darong Tang, Junzhang Wu, Jinsong Zeng, Wenhua Gao, Liang Du. Research on cigarette during smoking based on reverse engineering and numerical simulation[J]. 中国化学工程学报, 2019, 27(10): 2359-2375.

Darong Tang, Junzhang Wu, Jinsong Zeng, Wenhua Gao, Liang Du. Research on cigarette during smoking based on reverse engineering and numerical simulation[J]. Chinese Journal of Chemical Engineering, 2019, 27(10): 2359-2375.

参考文献

[1] D.Y. Deng, X. Zheng, S.J. Chen, Indoor smoke pollution in the different burning patterns, Environmental Science & Technology 29(12) (2006) 26-27.
[2] X.C. Shen, X.J. Liu, Y.D. Zhang, et al., Influence of cut rag distribution in cigarette on deliveries of ammonia and tar in mainstream smoke, Tobacco Science & Technology 2(6) (2013) 000037-000039.
[3] J.M. Jones, D.K. Walters, Development and initial validation of a two-equation transition sensitive turbulence model for CFD simulations, ASME 2006 International Mechanical Engineering Congress and Exposition 2006, pp. 389-398.
[4] Y.J. Hu, Finite Element Analysis and Application. Tsinghua University Press, 2009. (in Chinese)
[5] J.Y. Tu, G.H. Yeoh, C.Q. Liu, Computational Fluid Dynamics, Northeastern University Press, UK, 2004.
[6] P. Wesseling, Principles of Computational Fluid Dynamics, 22(1), Springer, 20093-9.
[7] F.J. Wang, Computational Fluid Dynamics Analysis:Principles and Applications of CFD Software, Tsinghua University Press, 2004(in Chinese).
[8] A.A. Rostami, M.R. Hajaligol, Modeling the diffusion of carbon monoxide and other gases from the paper wrapper of a cigarette during puffing, Journal of Analytical & Applied Pyrolysis 66(1) (2003) 263-280.
[9] A. Rostami, J. Murthy, M. Hajaligol, Modeling of a smoldering cigarette, Journal of Analytical & Applied Pyrolysis 66(1) (2003) 281-301.
[10] C. Yan, W. Xie, F.Y. Li, et al., Numerical simulation of cigarette smoldering, Tobacco Science & Technology 6(2014) 17-2239(in Chinese).
[11] Q.C. Yu, J.Z. Wu, Y.F. Huang, et al., Factors influencing diffusion process of cigarette smoke by CFD-based simulation[J], Tobacco Science & Technology 50(5) (2017) 79-84(in Chinese).
[12] B. Eitzinger, S. Pirker, Numerical simulation of a cigarette during smoking, Beiträge Zur Tabakforschung 21(7) (2014) 403-416.
[13] M.S. Saidi, M.R. Hajaligol, A. Mhaisekar, et al., A 3D modeling of static and forward smoldering combustion in a packed bed of materials, Appl. Math. Model. 31(9) (2007) 1970-1996.
[14] R.R. Baker, Gas velocities inside a burning cigarette, Nature 264(5582) (1976) 167-169.
[15] T. Várady, R.R. Martin, J. Cox, Reverse engineering of geometric models-An introduction, Comput. Aided Des. 29(4) (1997) 255-268.
[16] P. Huang, G. Yin, Y.U. Zhen, et al., The application of reverse engineering and numerical simulation in innovating design of the automotive panel die, Machine Tool & Hydraulics 10(64) (2007) 72-74(in Chinese).
[17] Y. Li, Numerical Simulation of Cerebrospinal Fluid Based on Reverse Engineering, PhD Thesis Dalian University of Technology, 2014.
[18] G.J. Xiu, Three-Dimensional Flow Numerical Simulation and Rapid Manufacturing for Toilet on RE, PhD Thesis South China University of Technology, 2011.
[19] D.T. Li, W.J. Deng, X.Y. Wang, et al., Research on resistance characteristic of fan bike based on reverse engineering and numerical simulation, Manufacturing Automation 37(15) (2015) 48-50.
[20] Y. Zhang, Y.J. Gong, B.P. Zeng, et al., Three-dimensional modeling and numerical simulation of centrifugal pump based on reverse engineering, Ship Sci. Technol. 38(12) (2016) 94-97.
[21] T. Jin, S.G. Tong, Reverse Engineering, China Machine Press, Beijing, 2003(in Chinese).
[22] H.J. Zhu, Y.H. Lin, L.H. Xie, FLUENT-Fluid Analysis and Simulation of Practical Tutorials, Posts & Telecom Press, Beijing, 2010(in Chinese).
[23] FLUENT 15.0 User's Guide Z., FLUENT Inc., 2013
[24] L. Wang, B. Li, D.F. LU, et al., Numerical simulation of dynamic ventilation characteristics of cigarette at different puff profiles, Tobacco Science & Technology 49(1) (2016) 74-79.

Research on cigarette during smoking based on reverse engineering and numerical simulation

Research on cigarette during smoking based on reverse engineering and numerical simulation

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	Lijuan Zhao, Zhe Tan, Xiaoguang Zhang, Qijun Zhang, Wei Wang, Qiang Deng, Jie Ma, De'an Pan. Research on process modeling and simulation of spent lead paste desulfurization enhanced reactor[J]. 中国化学工程学报, 2023, 60(8): 293-303.
[2]	Chengang Yang, Huaizhi Han, Quan Zhu, Xiangyuan Li. Cracking and buoyancy effect on hydrocarbon endothermic and heat transfer characteristics in rectangular mini-channel[J]. 中国化学工程学报, 2023, 56(4): 242-254.
[3]	Shuangfei Zhao, Yingying Nie, Wenyan Zhang, Runze Hu, Lianzhu Sheng, Wei He, Ning Zhu, Yuguang Li, Dong Ji, Kai Guo. Microfluidic field strategy for enhancement and scale up of liquid–liquid homogeneous chemical processes by optimization of 3D spiral baffle structure[J]. 中国化学工程学报, 2023, 56(4): 255-265.
[4]	Qi Han, Xin-Yuan Zhang, Hai-Bo Wu, Xian-Tai Zhou, Hong-Bing Ji. Different efficiency toward the biomimetic aerobic oxidation of benzyl alcohol in microchannel and bubble column reactors: Hydrodynamic characteristics and gas–liquid mass transfer[J]. 中国化学工程学报, 2023, 55(3): 84-92.
[5]	Songsong Wang, Hong Li, Changyuan Tao, Renlong Liu, Yundong Wang, Zuohua Liu. Study on cavern evolution and performance of three mixers in agitation of yield-pseudoplastic fluids[J]. 中国化学工程学报, 2023, 55(3): 111-122.
[6]	Yongbo Zhou, Yang Jin, Jun Li, Qinyan Wang, Ming Chen. Numerical study on the hydrodynamics behavior of a central insert microchannel[J]. 中国化学工程学报, 2023, 53(1): 361-373.
[7]	Tianpeng LiZhou, Jiajia Luo, Tiefeng Wang. Enhancement of acetylene and ethylene yields in partially decoupled oxidation of ethane by changing the composition of heat carrier[J]. 中国化学工程学报, 2022, 47(7): 71-78.
[8]	Zewen Chen, Yongjun Wu, Jian Wang, Peicheng Luo. Study on the solid–liquid suspension behavior in a tank stirred by the long-short blades impeller[J]. 中国化学工程学报, 2022, 47(7): 79-88.
[9]	Liying Chen, Junheng Guo, Wenpeng Li, Shuchun Zhao, Wei Li, Jinli Zhang. A numerical study of mixing intensification for highly viscous fluids in multistage rotor–stator mixers[J]. 中国化学工程学报, 2022, 47(7): 218-230.
[10]	Zijun Li, Shubo Wang, Sai Yao, Xueke Wang, Weiwei Li, Tong Zhu, Xiaofeng Xie. Experimental and numerical study on improvement performance by wave parallel flow field in a proton exchange membrane fuel cell[J]. 中国化学工程学报, 2022, 45(5): 90-102.
[11]	Yongjun Wu, Pan You, Peicheng Luo. Effect of pitched short blades on the flow characteristics in a stirred tank with long-short blades impeller[J]. 中国化学工程学报, 2022, 45(5): 143-152.
[12]	Ning Liu, Xingping Liu, Fumin Wang, Feng Xin, Mingshuai Sun, Yi Zhai, Xubin Zhang. CFD simulation study of the effect of baffles on the fluidized bed for hydrogenation of silicon tetrachloride[J]. 中国化学工程学报, 2022, 45(5): 219-228.
[13]	Narjes Hemati Alam, Eslam Kashi, Razieh Habibpour. Computational fluid dynamics simulation of gas dispersion in complex facilities using Kit Fox field experiments: Validation and statistical evaluation[J]. 中国化学工程学报, 2022, 44(4): 412-423.
[14]	Huina Wang, Xiaoxia Duan, Xin Feng, Zai-Sha Mao, Chao Yang. Effect of impeller type and scale-up on spatial distribution of shear rate in a stirred tank[J]. 中国化学工程学报, 2022, 42(2): 351-363.
[15]	Anshi Hong, Zisheng Zhang, Xingang Li, Xin Gao. A generalized CFD model for evaluating catalytic separation process in structured porous materials[J]. 中国化学工程学报, 2022, 51(11): 168-177.