A Numerical Method on Inverse Determination of Heat Transfer Coefficient Based on Thermographic Temperature Measurement

›› 2008, Vol. 16 ›› Issue (6): 901-908.

A Numerical Method on Inverse Determination of Heat Transfer Coefficient Based on Thermographic Temperature Measurement

范春利, 孙丰瑞, 杨立

Department of Power Engineering, Naval University of Engineering, Wuhan 430033, China

收稿日期:2008-03-30 修回日期:2008-09-20 出版日期:2008-12-28 发布日期:2008-12-28
通讯作者: FAN Chunl,E-mail:chlfan@163.com

A Numerical Method on Inverse Determination of Heat Transfer Coefficient Based on Thermographic Temperature Measurement

FAN Chunli, SUN Fengrui, YANG Li

Department of Power Engineering, Naval University of Engineering, Wuhan 430033, China

Received:2008-03-30 Revised:2008-09-20 Online:2008-12-28 Published:2008-12-28

摘要/Abstract

摘要： The heat transfer coefficient in a multidimensional heat conduction problem is obtained from the solution of the inverse heat conduction problem based on the thermographic temperature measurement.The modified one-dimensional correction method(MODCM),along with the finite volume method,is employed for both two-and three-dimensional inverse problems.Aseries of numerical experiments are conducted in order to verify the effectiveness of the method.In addition,the effect of the temperature measurement error,the ending criterion of the iteration,etc.on the result of the inverse problem is investigated.It is proved that the method is a simple,stable and accurate one that can solve successfully the inverse heat conduction problem.

关键词: inverse heat conduction problem, heat transfer coefficient, finite volume method, modified one-dimensional correction method, measurement error

Abstract: The heat transfer coefficient in a multidimensional heat conduction problem is obtained from the solution of the inverse heat conduction problem based on the thermographic temperature measurement.The modified one-dimensional correction method(MODCM),along with the finite volume method,is employed for both two-and three-dimensional inverse problems.Aseries of numerical experiments are conducted in order to verify the effectiveness of the method.In addition,the effect of the temperature measurement error,the ending criterion of the iteration,etc.on the result of the inverse problem is investigated.It is proved that the method is a simple,stable and accurate one that can solve successfully the inverse heat conduction problem.

Key words: inverse heat conduction problem, heat transfer coefficient, finite volume method, modified one-dimensional correction method, measurement error

范春利, 孙丰瑞, 杨立. A Numerical Method on Inverse Determination of Heat Transfer Coefficient Based on Thermographic Temperature Measurement[J]. , 2008, 16(6): 901-908.

FAN Chunli, SUN Fengrui, YANG Li. A Numerical Method on Inverse Determination of Heat Transfer Coefficient Based on Thermographic Temperature Measurement[J]. , 2008, 16(6): 901-908.

参考文献

1 Beck, J.V., Blackwell, B., “Inverse problems”, In:Minkowycz, W.J., Schneider, G.E., Pletcher, R.H., eds., Handbook of Numerical Heat Transfer, Wiley Interscience, New York(1988).
2 Tikhonov, A.N., Arnold, K.J., Solution of Ill-Posed Problems, Winston & Sons, Washington(1977).
3 Tikhonov, A.N., “Regularization of incorrectly posed problems”, Soviet Math. Dokl., 4, 1624-1627(1963).
4 Alifanov, O.M., Inverse Heat Transfer Problems, Springer-Verlag, New York(1994).
5 Alifanov, O.M., “Solution of an inverse problem of heat-conduction by iterative methods”, J. Eng. Phys., 26, 471-476(1974).
6 Alifanov, O.M., Mikhailov, V.V., “Solution of the overdetermined inverse problem of thermal conductivity involving inaccurate data”, High Temp., 23, 112-117(1985).
7 Beck, J.V., Blackwell, B., Clair, C.R., Inverse Heat Conduction:Ill-Posed Problems, Wiley Interscience, New York(1985).
8 Beck, J.V., “Calculation of surface heat flux from an internal temperature history”, ASME Paper, 62-HT-46(1962).
9 Ozisik, M.N., Oriande, H.R.B., Inverse Heat Transfer, Fundamentals and Applications, Taylor & Francis, New York(2000).
10 Huang, C.H., Wang, S.P., “A three-dimensional inverse heat conduction problem in estimating surface heat flux by conjugate gradient method”, Int. J. Heat Mass Transfer, 42, 3387-3403(1999).
11 Wu, S.K., Chu, H.S., “Inverse determination of surface temperature in thin-film/substrate systems with interface thermal resistance”, Int. J. Heat Mass Transfer, 47, 3507-3515(2004).
12 Fan, C.L., Sun, F.R., Yang, L., “An algorithm study on the identification of pipeline's irregular inner boundary based on thermographic temperature measurement”, Meas. Sci. Technol., 18, 2170-2177(2007).
13 Fan, C.L., Sun, F.R., Yang, L., “A new computational scheme on quantitative inner pipe boundary identification based on the estimation of effective thermal conductivity”, J. Phys. D Appl. Phys., 41, 205501(2008).
14 Osman, A.M., Beck, J.V., “Investigation of transient heat transfer coefficient in quenching experiments”, J. Heat Transfer, 112, 843-848(1990).
15 Xu, J., Chen, T., “A nonlinear solution of inverse heat conduction problem for obtaining the inner heat transfer coefficient”, Heat Transfer Eng., 19, 45-53(1998).
16 Martin, T.J., Dulikravich, G.S., “Inverse determination of steady heat convection coefficient distributions”, J. Heat Transfer, 120, 328-334(1998).
17 Chantasiriwan, S., “Inverse heat conduction problem of determining time-dependent heat transfer coefficient”, Int. J. Heat Mass Transfer, 42, 4275-4285(2000).
18 Chantasiriwan, S., “Inverse determination of steady-state heat transfer coefficient”, Int. Comm. Heat Mass Transfer, 27, 1155-1164(2000).
19 Fan, C. L., Sun, F.R., Yang, L., “A numerical method for determining thermal conductivity distribution of the interlayer of a sandwich plate based on thermographic temperature measurement”, J. Phys. D Appl. Phys., 41, 135501(2008).
20 Yang, L., Geng, W., Jiang, L., Zou, L., Hong, J., “Profile identification in dynamic infrared thermography:Adaptability and stability”, Int. J. Infrared Millimeter Waves, 20, 623-634(1999).
21 Huang, R., “Some inequalities for the Hadamard product and the Fan product of matrices”, Linear Algebra its Appl., 428, 1551-1559(2008).
22 Yang, L., “Calculation and error analysis of temperature measurement using thermal imager”, Infrared Technol., 21, 20-24(1999).(in Chinese)
23 Kou, W., Yang, L., “Error analysis of infrared measurement”, Infrared Technol., 23, 32-35(2001).(in Chinese)

[1]	Qingsheng Liu, Youqiong Liu, Chuntao Jiang. Modeling and simulation of material distribution in the sequential co-injection molding process[J]. 中国化学工程学报, 2022, 44(4): 507-520.
[2]	Sajad Mir, Omid Ali Akbari, Davood Toghraie, Ghanbarali Sheikhzadeh, Ali Marzban, Saeid Mir, Pouyan Talebizadehsardari. A comprehensive study of two-phase flow and heat transfer of water/Ag nanofluid in an elliptical curved minichannel[J]. 中国化学工程学报, 2020, 28(2): 383-402.
[3]	Jiajun Song, Dongyan Han, Qinqin Xu, Dan Zhou, Jianzhong Yin. Heat transfer model of two-phase flow across tube bundle in submerged combustion vaporizer[J]. Chinese Journal of Chemical Engineering, 2019, 27(3): 613-619.
[4]	Jianyang Zhou, Xiaoping Luo, Cong Deng, Mingyu Xie, Lin Zhang, Di Wu, Feng Guo. Influence of nanoparticle concentrations on flow boiling heat transfer coefficients of Al₂O₃/R141b in micro heat exchanger by direct metal laser sintering[J]. Chinese Journal of Chemical Engineering, 2017, 25(12): 1714-1726.
[5]	H. R. Jin, H. Lim, D. H. Lim, Y. Kang, Ki-Won Jun. Heat Transfer in a Liquid-Solid Circulating Fluidized Bed Reactor with Low Surface Tension Media[J]. Chinese Journal of Chemical Engineering, 2013, 21(8): 844-849.
[6]	Ajmal Shah, Imran Rafiq Chughtai, Mansoor Hameed Inayat. Numerical Simulation of Direct-contact Condensation from a Supersonic Steam Jet in Subcooled Water[J]. , 2010, 18(4): 577-587.
[7]	阮春蕾, 欧阳洁. Numerical Simulation of the Non-isothermal Viscoelastic Flow Past a Confined Cylinder[J]. , 2010, 18(2): 177-184.
[8]	S. A. Alavi Fazel, A. A. Safekordi, M. Jamialahmadi. Pool Boiling Heat Transfer in Dilute Water/Triethyleneglycol Solutions[J]. , 2009, 17(4): 552-561.

A Numerical Method on Inverse Determination of Heat Transfer Coefficient Based on Thermographic Temperature Measurement

A Numerical Method on Inverse Determination of Heat Transfer Coefficient Based on Thermographic Temperature Measurement

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 8

编辑推荐

Metrics

本文评价