Modeling on a Modified Feeding Mode of Simulated Moving Bed for Improving Productivity

›› 2010, Vol. 18 ›› Issue (2): 239-243.

Modeling on a Modified Feeding Mode of Simulated Moving Bed for Improving Productivity

危凤¹, 沈波¹, 陈明杰¹, 赵迎宪¹, 邵立平²

1. Ningbo Institute of Technology, Zhejiang University, Ningbo 315100, China;
2. Zhejiang NHU Company Ltd., Xinchang 312500, China

收稿日期:2009-08-12 修回日期:2009-12-26 出版日期:2010-04-28 发布日期:2010-04-28
通讯作者: WEI Feng,E-mail:weifeng@nit.net.cn
基金资助:
Supported by the Natural Science Foundation of Ningbo(2009A610153)

Modeling on a Modified Feeding Mode of Simulated Moving Bed for Improving Productivity

WEI Feng¹, SHEN Bo¹, CHEN Mingjie¹, ZHAO Yingxian¹, SHAO Liping²

1. Ningbo Institute of Technology, Zhejiang University, Ningbo 315100, China;
2. Zhejiang NHU Company Ltd., Xinchang 312500, China

Received:2009-08-12 Revised:2009-12-26 Online:2010-04-28 Published:2010-04-28
Supported by:
Supported by the Natural Science Foundation of Ningbo(2009A610153)

摘要/Abstract

摘要： A new feeding mode for a simulated moving bed(SMB) is proposed.The outlet stream from zone Ⅱ is collected at regular intervals.The concentration of the solution is increased by dissolving raw materials and then fed to zone Ⅲ as the feed stream during the next collection interval.In this feeding mode,the concentration of the stream fed to zone Ⅲ is identical to that of original feed,while in a conventional SMB,the feed is diluted by mix-ing with the outlet stream of zone Ⅱ before feeding to zone III.The new feeding mode increases the inlet concentra-tion of zone Ⅲ.A modeling investigation shows that higher inlet concentration of zone Ⅲ increases the height of concentration band in SMB,improving the separation performance significantly.In comparison with the traditonal feeding mode,the new feeding mode increases the productivity by 23.52% and decreases the solvent consumption by 22.56%,so as to increase the raffinate and extract concentrations by 53.17% and 20.38%,respectively.The col-lection interval for the outlet stream from zone Ⅱ has no effect on the separation performance after reaching the steady state,so that the collection interval can be increased to make the operation more convenient.

关键词: simulated moving bed, feeding mode, modified operation, simulation

Abstract: A new feeding mode for a simulated moving bed(SMB) is proposed.The outlet stream from zone Ⅱ is collected at regular intervals.The concentration of the solution is increased by dissolving raw materials and then fed to zone Ⅲ as the feed stream during the next collection interval.In this feeding mode,the concentration of the stream fed to zone Ⅲ is identical to that of original feed,while in a conventional SMB,the feed is diluted by mix-ing with the outlet stream of zone Ⅱ before feeding to zone III.The new feeding mode increases the inlet concentra-tion of zone Ⅲ.A modeling investigation shows that higher inlet concentration of zone Ⅲ increases the height of concentration band in SMB,improving the separation performance significantly.In comparison with the traditonal feeding mode,the new feeding mode increases the productivity by 23.52% and decreases the solvent consumption by 22.56%,so as to increase the raffinate and extract concentrations by 53.17% and 20.38%,respectively.The col-lection interval for the outlet stream from zone Ⅱ has no effect on the separation performance after reaching the steady state,so that the collection interval can be increased to make the operation more convenient.

Key words: simulated moving bed, feeding mode, modified operation, simulation

危凤, 沈波, 陈明杰, 赵迎宪, 邵立平. Modeling on a Modified Feeding Mode of Simulated Moving Bed for Improving Productivity[J]. , 2010, 18(2): 239-243.

WEI Feng, SHEN Bo, CHEN Mingjie, ZHAO Yingxian, SHAO Liping. Modeling on a Modified Feeding Mode of Simulated Moving Bed for Improving Productivity[J]. , 2010, 18(2): 239-243.

参考文献

1 Broughton, D.B., Gerhold, C.G., “Continuous sorption process employing fixed bed of sorbent and moving inlets outlets”, U.S. Patent, 2985589 (1961).
2 Rajendran, A., Paredes, G., Mazzotti, M., “Simulated moving bed chromatography for the separation of enantiomers”, J. Chromatogr. A, 1216, 709-738 (2009).
3 Seidel-Morgenstern, A., Keβler, L.C., Kaspereit, M., “New developments in simulated moving bed chromatography”, Chem. Eng. Technol., 31 (6), 826-837 (2008).
4 Gomes, P.S., Minceva, M., Rodrigues, A.E., “Simulated moving bed technology:old and new”, Adsorption, 12, 375-392 (2006).
5 Zhang, W., Lin, B.C., “Separation of ginsenoside Rb1 by simulated moving bed chromatography”, Fine Chemicals, 24 (6), 554-558 (2007). (in Chinese)
6 Wei, F., Zhao, Y.X., “Separation of capsaicin from capsaicinoids by simulated moving bed chromatography”, J. Chromatogr. A, 1187, 281-284 (2008).
7 Wei, F., Shen, B., Chen, M.J., “From analytical chromatography to simulated moving bed chromatography:Resolution of omeprazole enantiomers”, Ind. Eng. Chem. Res., 45,1420-1425 (2006).
8 Jupke, A., Epping, A., Schmidt-Traub, H., “Optimal design of batch and simulated moving bed chromatographic separation processes”, J. Chromatogr. A, 944, 93-117 (2002).
9 Giddings, J.C., Unified Separation Science, John Wiley & Sons, Inc. NewYork (1991).
10 Schramm, H., Kienle, A., Kaspereit, M., Seidel-Morgenstern, A., “Improved operation of simulated moving bed processes through cyclic modulation of feed flow and feed concentration”, Chem. Eng. Sci., 58, 5217-5227 (2003).
11 Zhang, Z., Morbedelli, M., Mazzotti, M., “Experimental assessment of PowerFeed chromatography”, AIChE J., 50 (3), 625-632 (2004).
12 Lübke, R., Seidel-Morgenstern, A., Tobiska, L., “Numerical method for accelerated calculation of cyclic steady state of ModiCon-SMBprocesses”, Comput. Chem. Eng., 31, 258-267 (2007).
13 Wei, F., Zhao, Y.X., “Modeling comparison between novel and traditional feed modes of simulated moving bed”, Ind. Eng. Chem. Res., 47, 3200-3206 (2008).
14 Haag, J., Vande Wouwer, A., Lehoucq, S., Saucez, P., “Modeling and simulation of a SMB chromatographic process designed for enantioseparation”, Control Eng. Pract., 9, 921-928 (2001).
15 Vande Wouwer, A., Saucez, P., Schinesser, W.E., “Simulated of distributed parameter systems using a matlab-based method of lines toolbox:chemical engineering applications”, Ind. Eng. Chem. Res., 43, 3469-3477 (2004).
16 Dünnebier, G., Weirich, I., Klatt, K.U., “Computationally efficient dynamic modelling and simulation of simulated moving bed chromatographic processes with linear isotherms”, Chem. Eng. Sci., 53, 2537-2546 (1998).
17 Pais, L.S., Loureiro, J.M., Rodrigues, A.E., “Modeling strategies for enantiomers separation by SMB chromatography”, AIChE J., 44, 561-569 (1998).
18 Migliorini, C., Mazzotti, M., Morbidelli, M., “Simulated moving-bed units with extra-column dead volume”, AIChE J., 45, 1411-1421(1999).
19 Lu, J.G., “A non-linear non-ideal model of simulated moving bed chromatography for chiral separations”, Chin. J. Chem. Eng., 11, 234-239 (2003).
20 Lü, Y.B., Wei, F., Shen, B., Ren, Q.L., Wu, P.D., “Modeling, simulation of a simulated moving bed for separation of phosphatidylcholine from soybean phospholipids”, Chin. J. Chem. Eng., 14, 171-177 (2006).
21 Wang, S., Ma, Z.F., Yao, H.Q., “Modeling of simulated moving-bed adsorption”, Chem. Eng., 34 (2), 8-12 (2006). (in Chinese)
22 Mazzotti, M., Storti, G., Morbidelli, M., “Optimal operation of simulated moving bed units for nonlinear chromatographic separations”, J. Chromatogr. A, 769, 3-24 (1997).
23 Migliorini, C., Mazzotti, M., Morbidelli, M., “Continuous chromatographic separation through simulated moving bed under linear and nonlinear conditions”, J. Chromatogr. A, 827, 161-173 (1998).

[1]	Jiahao Xing, Huaizhi Han, Ruitian Yu, Wen Luo. Numerical simulation of flow and heat transfer of n-decane in sub-millimeter spiral tube at supercritical pressure[J]. 中国化学工程学报, 2023, 60(8): 173-185.
[2]	Jindong Dai, Chi Zhai, Jiali Ai, Guangren Yu, Haichao Lv, Wei Sun, Yongzhong Liu. A cellular automata framework for porous electrode reconstruction and reaction-diffusion simulation[J]. 中国化学工程学报, 2023, 60(8): 262-274.
[3]	Lijuan Zhao, Zhe Tan, Xiaoguang Zhang, Qijun Zhang, Wei Wang, Qiang Deng, Jie Ma, De'an Pan. Research on process modeling and simulation of spent lead paste desulfurization enhanced reactor[J]. 中国化学工程学报, 2023, 60(8): 293-303.
[4]	Jian Han, Xinhua Liu, Shanwei Hu, Nan Zhang, Jingjing Wang, Bin Liang. Optimization of decoupling combustion characteristics of coal briquettes and biomass pellets in household stoves[J]. 中国化学工程学报, 2023, 59(7): 182-192.
[5]	Wende Tian, Jiawei Zhang, Zhe Cui, Haoran Zhang, Bin Liu. Microscopic mechanism study and process optimization of dimethyl carbonate production coupled biomass chemical looping gasification system[J]. 中国化学工程学报, 2023, 58(6): 291-305.
[6]	Huan-Huan Yin, Yin-Lei Han, Xiao Yan, Yi-Xin Guan. Proanthocyanidins prevent tau protein aggregation and disintegrate tau filaments[J]. 中国化学工程学报, 2023, 57(5): 63-71.
[7]	Jixiang Liu, Xin Zhou, Gengfei Yang, Hui Zhao, Zhibo Zhang, Xiang Feng, Hao Yan, Yibin Liu, Xiaobo Chen, Chaohe Yang. Conceptual carbon-reduction process design and quantitative sustainable assessment for concentrating high purity ethylene from wasted refinery gas[J]. 中国化学工程学报, 2023, 57(5): 290-308.
[8]	Shengfeng Luo, Song Zhang, Yiping Zeng, Hui Zhang, Lili Zheng, Zhaopeng Xu. Study on oxygen transport and titanium oxidation in coating cracks under parallel gas flow based on LBM modelling[J]. 中国化学工程学报, 2023, 56(4): 15-24.
[9]	Jikai Dong, Bing Wang, Xinjie Wang, Chenxi Cao, Shikuan Chen, Wenli Du. Optimization of sensor deployment sequences for hazardous gas leakage monitoring and source term estimation[J]. 中国化学工程学报, 2023, 56(4): 169-179.
[10]	Shuangfei Zhao, Yingying Nie, Wenyan Zhang, Runze Hu, Lianzhu Sheng, Wei He, Ning Zhu, Yuguang Li, Dong Ji, Kai Guo. Microfluidic field strategy for enhancement and scale up of liquid–liquid homogeneous chemical processes by optimization of 3D spiral baffle structure[J]. 中国化学工程学报, 2023, 56(4): 255-265.
[11]	Qiaoqiao Liu, Guihong Lin, Jian Zhou, Liangliang Huang, Chang Liu. Hydrogen-bond mediated and concentrate-dependent NaHCO₃ crystal morphology in NaHCO₃–Na₂CO₃ aqueous solution: Experiments and computer simulations[J]. 中国化学工程学报, 2023, 55(3): 49-58.
[12]	Fufeng Liu, Luying Jiang, Jingcheng Sang, Fuping Lu, Li Li. Molecular basis of cross-interactions between Aβ and Tau protofibrils probed by molecular simulations[J]. 中国化学工程学报, 2023, 55(3): 173-180.
[13]	Pan Huang, Zekai Zhang, Yuxin Chen, Changwei Liu, Yong Zhang, Cheng Lian, Yajun Ding, Honglai Liu. Multi-scale simulation of diffusion behavior of deterrent in propellant[J]. 中国化学工程学报, 2023, 54(2): 29-35.
[14]	Jialei Sha, Chenyi Liu, Zhihong Ma, Weizhong Zheng, Weizhen Sun, Ling Zhao. Understanding the interfacial behaviors of benzene alkylation with butene using chloroaluminate ionic liquid catalyst: A molecular dynamics simulation[J]. 中国化学工程学报, 2023, 54(2): 44-52.
[15]	Baodong Zhao, Yinglei Wang, Fulei Gao, Yajing Liu, Weixiao Liu, Feng Ding. Understanding the alkyl effect of geminal dinitropropyl ester energetic plasticizers on hydroxyl terminated polybutadiene (HTPB): Simultaneous tuning on low temperature behavior and processability[J]. 中国化学工程学报, 2023, 54(2): 364-371.

Modeling on a Modified Feeding Mode of Simulated Moving Bed for Improving Productivity

Modeling on a Modified Feeding Mode of Simulated Moving Bed for Improving Productivity

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价