Modeling of Mass Transfer in Nonideal Multicomponent Mixture with Maxwell-Stefan Approach

›› 2010, Vol. 18 ›› Issue (3): 362-371.

Modeling of Mass Transfer in Nonideal Multicomponent Mixture with Maxwell-Stefan Approach

宋一鸣, 宋金荣, 龚明, 曹彬, 杨燕红, 马晓迅

1. School of Chemical Engineering, Northwest University, Xi'an 710069, China;
2. Chemical Engineering Research Center of the Ministry of Education for Advanced Use Technology of Shanbei Energy, Xi'an 710069, China

收稿日期:2009-12-24 修回日期:2010-03-29 出版日期:2010-06-28 发布日期:2010-06-28
通讯作者: MA Xiaoxun,E-mail:maxym@nwu.edu.cn
基金资助:
Supported by the National Natural Science Foundation of China(20776118);Science&Technology Bureau of Xi'an[CXY09019(1)];Innovation Foundation for Graduated Student of Northwest University(08YJC21);Shaanxi Research Centerof Engineering Technology for Clean Coal Conversion(2008ZDGC-13)

Modeling of Mass Transfer in Nonideal Multicomponent Mixture with Maxwell-Stefan Approach

SONG Yiming, SONG Jinrong, GONG Ming, CAO Bin, YANG Yanhong, MA Xiaoxun

1. School of Chemical Engineering, Northwest University, Xi'an 710069, China;
2. Chemical Engineering Research Center of the Ministry of Education for Advanced Use Technology of Shanbei Energy, Xi'an 710069, China

Received:2009-12-24 Revised:2010-03-29 Online:2010-06-28 Published:2010-06-28
Supported by:
Supported by the National Natural Science Foundation of China(20776118);Science&Technology Bureau of Xi'an[CXY09019(1)];Innovation Foundation for Graduated Student of Northwest University(08YJC21);Shaanxi Research Centerof Engineering Technology for Clean Coal Conversion(2008ZDGC-13)

摘要/Abstract

摘要： The Intalox metal tower packing was used to simulate an industrial relevant extractive distillation column for purifying azeotropic multicomponent mixture.In order to explain the inconsistencies in the modeling of transfer process in nonideal multicomponent distillation column,a method was developed with equilibrium stage models(EQ)and non-equilibrium model(NEQ)incorporated with Maxwell-Stefan diffusion equations in the framework of AspenONE simulator.Dortmund Modified UNIFAC(UNIFAC-DMD)thermodynamic model was employed to estimate activity coefficients.In addition,to understand the reason for the diffusion against driving force and the different results by EQ and NEQ models,explicit investigations were made on diffusion coefficients, component Murphree efficiency and mass transfer coefficients.The results provide valuable information for basic design and applications associated with extractive distillation.

关键词: rate based model, equilibrium model, mass transfer coefficient, Murphree efficiency, extractive distillation, simulation

Abstract: The Intalox metal tower packing was used to simulate an industrial relevant extractive distillation column for purifying azeotropic multicomponent mixture.In order to explain the inconsistencies in the modeling of transfer process in nonideal multicomponent distillation column,a method was developed with equilibrium stage models(EQ)and non-equilibrium model(NEQ)incorporated with Maxwell-Stefan diffusion equations in the framework of AspenONE simulator.Dortmund Modified UNIFAC(UNIFAC-DMD)thermodynamic model was employed to estimate activity coefficients.In addition,to understand the reason for the diffusion against driving force and the different results by EQ and NEQ models,explicit investigations were made on diffusion coefficients, component Murphree efficiency and mass transfer coefficients.The results provide valuable information for basic design and applications associated with extractive distillation.

Key words: rate based model, equilibrium model, mass transfer coefficient, Murphree efficiency, extractive distillation, simulation

宋一鸣, 宋金荣, 龚明, 曹彬, 杨燕红, 马晓迅. Modeling of Mass Transfer in Nonideal Multicomponent Mixture with Maxwell-Stefan Approach[J]. , 2010, 18(3): 362-371.

SONG Yiming, SONG Jinrong, GONG Ming, CAO Bin, YANG Yanhong, MA Xiaoxun. Modeling of Mass Transfer in Nonideal Multicomponent Mixture with Maxwell-Stefan Approach[J]. , 2010, 18(3): 362-371.

参考文献

1 Billet, R., Industrielle Destillation, Chemie Verlag, Weinheim(1995).(in German)
2 Düssel, R., Stichlmair, J., “Separation of azeotropic mixtures by batch distillation using an entrainer”, Comput. Chem. Eng., 19, 113-118(1995).
3 Castillo, F.J.L., Towler, G.P., “Influence of mlulticomponent mass transfer on homogeneous azeotropic distillation”, Chem. Eng. Sci., 53(5), 963-976(1999).
4 Langston, P., Hilal, N., Shingfield, S., Webb, S., “Simulation and optimization of extractive distillation with water as solvent”, Chem. Eng. Process, 44, 345-351(2005).
5 Jiménez, L., Wanhschafft, O.M., Julka, V., “Analysis of residue curve maps of reactive and extractive distillation units”, Comput. Chem. Eng., 25, 635-642(2001).
6 Lei, Z.G., Zhou, R.Q., Duan, Z.T., “Process improvement on separating C₄ by extractive distillation”, Chem. Eng. J., 85, 379-386(2002).
7 Repke, J.U., Ausner, I., Paschke, S., Hoffmann, A., Wozny, G., “On the track to understanding three phases in one tower”, Trans IChemE, Part A, Chem. Eng. R. & D., 85(A1), 50-58(2007).
8 Thomsen, K., Iliuta, M.C., Rasmussen, P., “Extended UNIQUAC model for correlation and prediction of vapor-liquid-liquid-solid equilibria in aqueous salt systems containing non-electrolytes. Part b:alcohol(ethanol, propanols, butanols)-water-salt systems”, Chem. Eng. Sci., 59, 3631-3647(2004).
9 Eckert, E., Vaněk, T., “Some aspects of rate-based modeling and simulation of three-phase distillation columns”, Comput. Chem. Eng., 25, 603-612(2001).
10 Kewis, W.K., Seader, J.D., “The rate-based approach for modeling staged separations”, Chem. Eng. Prog., 85, 41-49(1989).
11 Higler, A., Chande, R., Taylor, R., Baur, R., Krishna, R., “Nonequilibrium modeling of three-phase distillation”, Comput. Chem. Eng., 28, 2021-2036(2004).
12 Yang, X.J., Yin, X., Ouyang, P.K., “Simulation of 1,3-butadiene production process by dimethylfomamide extractive distillation”, Chin. J. Chem. Eng., 17(1), 27-35(2009).
13 Eckert, J.S., “Trays and packings:Selecting the proper distillation column packing”, Chem. Eng. Prog., 66, 39-44(1970).
14 Fullarton, D., “Selektivit t und übertragungsleitstung”, Chem. Eng. Proc., 20, 255-263(1986).(in German)
15 Higler, A., Krishna, R., Taylor, R., “Nonequilibrium cell model for multicomponent(reactive) separation processes”, AIChE J., 45(11), 2357-2370(1999).
16 Kooijman, H.A., Taylor, R., “Modeling mass transfer in multicomponent distillation”, Chem. Eng. J., 57, 177-188(1995).
17 Krishna, R., Wesselingh, J.A., “The Maxwell-Stefan approach to mass transfer”, Chem. Eng. Sci., 52(6), 861-911(1997).
18 Toor, H.L., “Diffusion in three-component gas mixtures”, AIChE J., 3, 198-207(1957).
19 Zimmerman, A., Joulia, X., Gourdon, C., Gorak, A., “Maxwell-Stefan approach in extractor design”, Chem. Eng. J., 57, 229-236(1995).
20 Lao, M., Taylor, R., “Modeling mass transfer in three-phase distillation”, Ind. Eng. Chem. Res., 33, 2637-2650(1994).
21 Wesselingh, J.A., “Non-equilibrium modeling of distillation”, Trans IChemE., 75(A), 529-538(1997).
22 Krishna, R., Standart, G.L., “A multicomponent film model incorporating an exact matrix method of solution to the Maxwell-Stefan equations”, AIChE J., 22, 383-389(1976).
23 Krishna, R., Martinez, H.F., Sreedhar, R., Standart, G.L., “Murphree point efficiencies in multicomponent mixtures”, Trans. Inst. Chem. Eng., 55, 178-186(1977).
24 Krishna, R., Taylor, R., Multicomponent Mass Transfer, John Wiley & Sons, New York(1993).
25 Walter, G.W., “The two-film theory of gas absorption”, Chemical and Metallurgical Engineering, 29(4), 146-148(1923).
26 Krishnamurthy, R., Taylor, R., “A nonequilibrium stage model of multicomponent separation processes. Part I:model”, AIChE J., 3, 449-461(1985).
27 Baehr, H.D., Thermodynamik 11. Auflage, Springer-Verlag, Berlin(2002).(in German)
28 Seader, J.D., “The rate-based approach for modeling staged separations”, Chem. Eng. Prog., 85, 41-49(1989).
29 Springer, P.A.M., Krishna, R., “Crossing of boundaries in ternary azeotropic distillation:influence of interphase mass transfer”, Int. Comm. Heat & Mass Transfer, 28(3), 347-356(2001).
30 Springer, P.A.M., van der Molen, S., Krishna, R., “The need for using rigorous rate-based models for simulations of ternary azeotropic distillation”, Comput. Chem. Eng., 26, 1265-1279(2002).
31 Springer, P.A.M., van der Molen, S., Baur, R., Krishna, R., “Experimental verification of the Maxwell-Stefan formulation in describing composition trajectories during azeotropic distillation”, Trans IChemE., 80(A), 654-666(2002).
32 Springer, P.A.M., Baur, R., Krishna, R., “Composition trajectories for heterogeneous azeotropic distillation in a bubble-cap tray column”, Trans IChemE., 81(A), 413-426(2003).
33 Mersmann, A., Thermische Verfahrenstechnik, Springer Verlag, Berlin(1980).(in German)
34 Ojeda Nava, J.A., Krishna, R., “Influence of unequal component efficiencies on trajectories during distillation of a homogeneous azeotropic mixture”, Chem. Eng. Process, 43, 305-316(2004).
35 Oluji,., “Development of a complete simulation model for predicting the hydraulic and separation performance of distillation columns equipped with structured packings”, Chem. Biochem. Eng., 11(1), 31-46(1997).
36 Stichlmair, J., Bravo, J.L., Fair, J.R., “General model for prediction of pressure drop and capacity of countercurrent gas:liquid packed columns”, Gas Sep. Purif., 3, 19-28(1989).
37 Rehfeldt, S., Stichlmair, J., “Measurement and calculation of multicomponent diffusion coefficients in liquids”, Fluid Phase Equilibria, 256, 99-104(2007).
38 Billet, R., Schultes, M., “Prediction of mass transfer columns with dumped and arranged packings”, Trans IChemE., 77(A), 498-504(1999).
39 Baur, R., Taylor, R., Krishna, R., Copati, J.A., “Influence of mass transfer in distillation of mixtures with a distillation boundary”, Trans IChemE., 77(A), 561-565(1999).
40 Antonio Rocha, J., Bravo, J.L., Fair, J.R., “Distillation columns containing structured packings:a comprehensive model for their performance(II) mass-transfer model”, Ind. Eng. Chem. Res., 35(5), 1660-1667(1996).
41 Zeck, S., “Einfluβ von thermophysikalischen soffdaten auf die auslegung und den betrieb von destillationskolonnen”, Chem. Ing. Teck., 62(9), 707-717(1990).(in German)
42 Xu, Z.P., Afacan, A., Chuang, K.T., “Predicting mass transfer in packed columns containing structured packings”, Trans IChemE., 78(A), 91-98(2000).
43 Aspen Technology, AspenONE 2006 Reference Manual, Aspen Technology Inc., Cambridge, MA(2008).
44 Onda, K., Akeuchi, H.T., Okumoto, Y., “Mass transfer coefficients between gas and liquid phases in packed columns”, J. Chem. Eng. Jpn., 1(1), 56-61(1968).
45 Billet, R., Schultes, M., “Predicting mass transfer in packed columns”, Chem. Eng. Technol., 16, 1-9(1993).
46 Gorak, A., “Simulation thermischer trennverfahren fluider vielkomponentengemische”, Prozesssimulation, Schuler, H., eds., Wiley-VCH, Germany, 349-408(2002).(in German)
47 Lucia, A., Amale, A., Taylor, R., “Distillation pinch points and more”, Comput. Chem. Eng., 32, 1342-1364(2008).
48 Rao, D.P., Prem Kumar, R.S., Pandit, P., Das, T.C.T., “Multicomponent tray efficiencies accounting for entrainment”, Chem. Eng. J., 57, 237-246(1995).
49 Strigle, R. F. Jr., Rukovena, F., “Packed distillation column design”, Chem. Eng. Progr., 75(3), 86-91(1979).
50 Strigle, R.F., Jr, Random Packing and Packed Towers, Design and Applications, GPC, Houston(1988).
51 Vogelpohl, A., “Murphree efficiencies in multicomponent systems”, Ins. Chem. Eng. Symp. Ser., 56, 25-31(1979).
52 Olano, S., Nagura, S., Kosuge. H., Asano, K., “Mass transfer in binary and ternary distillation by a packed column with structured packing”, J. Chem. Eng. Jpn., 28, 750-757(1995).
53 Gao, X.Q., Ma, Y.G., Zhu, C.Y., Yu, G.C., “Towards the mechanism of mass transfer of a single bubble”, Chin. J. Chem. Eng., 14(2), 158-163(2006).
54 Yuan, X.G., Yu, G.C., “Computational mass transfer method for chemical process simulation”, Chin. J. Chem. Eng., 16(4), 497-502(2008).

[1]	Jiahao Xing, Huaizhi Han, Ruitian Yu, Wen Luo. Numerical simulation of flow and heat transfer of n-decane in sub-millimeter spiral tube at supercritical pressure[J]. 中国化学工程学报, 2023, 60(8): 173-185.
[2]	Jindong Dai, Chi Zhai, Jiali Ai, Guangren Yu, Haichao Lv, Wei Sun, Yongzhong Liu. A cellular automata framework for porous electrode reconstruction and reaction-diffusion simulation[J]. 中国化学工程学报, 2023, 60(8): 262-274.
[3]	Lijuan Zhao, Zhe Tan, Xiaoguang Zhang, Qijun Zhang, Wei Wang, Qiang Deng, Jie Ma, De'an Pan. Research on process modeling and simulation of spent lead paste desulfurization enhanced reactor[J]. 中国化学工程学报, 2023, 60(8): 293-303.
[4]	Jian Han, Xinhua Liu, Shanwei Hu, Nan Zhang, Jingjing Wang, Bin Liang. Optimization of decoupling combustion characteristics of coal briquettes and biomass pellets in household stoves[J]. 中国化学工程学报, 2023, 59(7): 182-192.
[5]	Wende Tian, Jiawei Zhang, Zhe Cui, Haoran Zhang, Bin Liu. Microscopic mechanism study and process optimization of dimethyl carbonate production coupled biomass chemical looping gasification system[J]. 中国化学工程学报, 2023, 58(6): 291-305.
[6]	Huan-Huan Yin, Yin-Lei Han, Xiao Yan, Yi-Xin Guan. Proanthocyanidins prevent tau protein aggregation and disintegrate tau filaments[J]. 中国化学工程学报, 2023, 57(5): 63-71.
[7]	Jixiang Liu, Xin Zhou, Gengfei Yang, Hui Zhao, Zhibo Zhang, Xiang Feng, Hao Yan, Yibin Liu, Xiaobo Chen, Chaohe Yang. Conceptual carbon-reduction process design and quantitative sustainable assessment for concentrating high purity ethylene from wasted refinery gas[J]. 中国化学工程学报, 2023, 57(5): 290-308.
[8]	Shengfeng Luo, Song Zhang, Yiping Zeng, Hui Zhang, Lili Zheng, Zhaopeng Xu. Study on oxygen transport and titanium oxidation in coating cracks under parallel gas flow based on LBM modelling[J]. 中国化学工程学报, 2023, 56(4): 15-24.
[9]	Jikai Dong, Bing Wang, Xinjie Wang, Chenxi Cao, Shikuan Chen, Wenli Du. Optimization of sensor deployment sequences for hazardous gas leakage monitoring and source term estimation[J]. 中国化学工程学报, 2023, 56(4): 169-179.
[10]	Shuangfei Zhao, Yingying Nie, Wenyan Zhang, Runze Hu, Lianzhu Sheng, Wei He, Ning Zhu, Yuguang Li, Dong Ji, Kai Guo. Microfluidic field strategy for enhancement and scale up of liquid–liquid homogeneous chemical processes by optimization of 3D spiral baffle structure[J]. 中国化学工程学报, 2023, 56(4): 255-265.
[11]	Qiaoqiao Liu, Guihong Lin, Jian Zhou, Liangliang Huang, Chang Liu. Hydrogen-bond mediated and concentrate-dependent NaHCO₃ crystal morphology in NaHCO₃–Na₂CO₃ aqueous solution: Experiments and computer simulations[J]. 中国化学工程学报, 2023, 55(3): 49-58.
[12]	Fufeng Liu, Luying Jiang, Jingcheng Sang, Fuping Lu, Li Li. Molecular basis of cross-interactions between Aβ and Tau protofibrils probed by molecular simulations[J]. 中国化学工程学报, 2023, 55(3): 173-180.
[13]	Pan Huang, Zekai Zhang, Yuxin Chen, Changwei Liu, Yong Zhang, Cheng Lian, Yajun Ding, Honglai Liu. Multi-scale simulation of diffusion behavior of deterrent in propellant[J]. 中国化学工程学报, 2023, 54(2): 29-35.
[14]	Jialei Sha, Chenyi Liu, Zhihong Ma, Weizhong Zheng, Weizhen Sun, Ling Zhao. Understanding the interfacial behaviors of benzene alkylation with butene using chloroaluminate ionic liquid catalyst: A molecular dynamics simulation[J]. 中国化学工程学报, 2023, 54(2): 44-52.
[15]	Qinggang Xu, Yasen Dai, Qing Zhao, Zhengrun Chen, Peizhe Cui, Zhaoyou Zhu, Yinglong Wang, Jun Gao, Yixin Ma. Economy, environmental assessment and energy conservation for separation of isopropanol/diisopropyl ether/water multi-azeotropes via extractive distillation coupled pervaporation process[J]. 中国化学工程学报, 2023, 54(2): 353-363.

Modeling of Mass Transfer in Nonideal Multicomponent Mixture with Maxwell-Stefan Approach

Modeling of Mass Transfer in Nonideal Multicomponent Mixture with Maxwell-Stefan Approach

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价