Pressure-volume-temperature and excess molar volume prediction of amorphous and crystallizable polymer blends by equation of state

doi:10.1016/j.cjche.2013.12.002

摘要/Abstract

摘要： In this work the statistical mechanical equation of state was developed for volumetric properties of crystalline and amorphous polymer blends. The Ihm-Song-Mason equations of state (ISMEOS) based on temperature and density at melting point (T_m and ρ_m) as scaling constants were developed for crystalline polymers such as poly(propylene glycol)+poly(ethylene glycol)-200 (PPG+PEG-200), poly(ethylene glycol) methyl ether-300 (PEGME-350)+PEG-200 and PEGME-350+PEG-600. Furthermore, for amorphous polymer blends containing poly(2,6-dimethyl-1,4-phenylene oxide) (PPO)+polystyrene (PS) and PS+poly(vinylmethylether) (PVME), the density and surface tension at glass transition (ρ_g and γ_g) were used for estimation of second Virial coefficient. The calculation of second Virial coefficients (B₂), effective van derWaals co-volume (b) andcorrection factor (α) was required for judgment about applicability of this model. The obtained results by ISMEOS for crystalline and amorphous polymer blends were in good agreement with the experimental data with absolute average deviations of 0.84% and 1.04%, respectively.

关键词: Amorphous polymer, Crystalline polymer, Equation of state, Second Virial coefficient

Abstract: In this work the statistical mechanical equation of state was developed for volumetric properties of crystalline and amorphous polymer blends. The Ihm-Song-Mason equations of state (ISMEOS) based on temperature and density at melting point (T_m and ρ_m) as scaling constants were developed for crystalline polymers such as poly(propylene glycol)+poly(ethylene glycol)-200 (PPG+PEG-200), poly(ethylene glycol) methyl ether-300 (PEGME-350)+PEG-200 and PEGME-350+PEG-600. Furthermore, for amorphous polymer blends containing poly(2,6-dimethyl-1,4-phenylene oxide) (PPO)+polystyrene (PS) and PS+poly(vinylmethylether) (PVME), the density and surface tension at glass transition (ρ_g and γ_g) were used for estimation of second Virial coefficient. The calculation of second Virial coefficients (B₂), effective van derWaals co-volume (b) andcorrection factor (α) was required for judgment about applicability of this model. The obtained results by ISMEOS for crystalline and amorphous polymer blends were in good agreement with the experimental data with absolute average deviations of 0.84% and 1.04%, respectively.

Key words: Amorphous polymer, Crystalline polymer, Equation of state, Second Virial coefficient

Fakhri Yousefi, Hajir Karimi, Maryam Gomar. Pressure-volume-temperature and excess molar volume prediction of amorphous and crystallizable polymer blends by equation of state[J]. , 2015, 23(3): 541-551.

参考文献

[1] P.G. Tait, Physics and Chemistry of the Voyage of H.M. S. Challenger, HMSO, London, England, 1888.
[2] P.A. Rodgers, Pressure-volume-temperature relation for polymeric liquids: A review of equation of state and their characteristic parameters for 56 polymers, J. Appl. Polym. Sci. 48 (1993) 1061-1080.
[3] G.R. Brannock, I.C. Sanchez, Off-lattice van derWaals equations of state for polymer liquids, Macromolecules 26 (1993) 4970-4972.
[4] Y. Sato, H. Hashiguchi, S. Takishima, H. Masuoka, Prediction of pVT properties of polymer melts with a new group-contribution equation of state, Fluid Phase Equilib. 144 (1998) 427-440.
[5] M.M. Papari, M. Kiani, R. Behjatmanesh-Ardakani, J. Moghadasi, A. Campo, Equation of state and p-V-T properties of polymer melts based on glass transition data, J. Mol. Liq. 161 (2011) 148-152.
[6] M.M. Papari, R. Behjatmanesh-Ardakani, M. Kiani, J. Moghadasi, A. Campo, Equation of state for polymers based on glass transition data, Colloid Polym. Sci. 289 (2011) 1081-1087.
[7] S.M. Hosseini,M.M. Papari, J.A. Moghadasi, Simplified equation of state for polymer melts from perturbed Yukawa hard-sphere chain, Polym. Bull. 69 (2012) 219-225.
[8] F. Yousefi, H. Karimi, pVT properties of polymermelts based on equation of state and neural network, Eur. Polym. J. 48 (2012) 1135-1143.
[9] F. Yousefi, H. Karimi, Application of equation of state and artificial neural network to prediction of volumetric properties of polymer melts, J. Ind. Eng. Chem. 19 (2013) 498-507.
[10] G. Bogdanic, A. Fredenslund, Revision of the group contribution Flory equation of state for phase equilibria calculations in mixtures with polymers. 1. Prediction of vapor-liquid equilibria for polymer solutions, Ind. Eng. Chem. Res. 33 (1994) 1331-1340.
[11] C.P. Bokis, M.D. Donohue, C.K. Hall, Application of a modified generalized Flory dimer theory to normal alkanes, Ind. Eng. Chem. Res. 33 (1994) 1290-1298.
[12] R.B. Gupta, J.M. Prausnitz, Vapor-liquid equilibria for copolymer/solvent systems: effect of “intramolecular repulsion”, Fluid Phase Equilib. 117 (1996) 77-83.
[13] G. Ihm, Y. Song, E.A. Mason, A new strong principle of corresponding states for nanpolar fluids, J. Chem. Phys. 94 (1991) 3839-3848.
[14] D.A. McQuarrie, Statistical Mechanics, Harper and Row, New York, 1976.
[15] J.D. Weeks, D. Chandler, H.C. Anderson, Role of repulsive forces in determining the equilibrium structure of simple liquids, J. Chem. Phys. 54 (1971) 5237-5247.
[16] Y. Song, E.A. Mason, Statistical mechanical theory of a new analytical equation of state, J. Chem. Phys. 91 (1989) 7840-7853.
[17] N.F. Carnahan, K.E.J. Starling, Equation of state for nonattracting rigid spheres, Chem. Phys. 51 (1969) 635-636.
[18] G. Ihm, Y. Song, E.A. Mason, Equation of state for mixtures of non-polar molecular fluids, Mol. Phys. 75 (1992) 897-915.
[19] F.M. Tao, E.A. Mason, Equation of state for mixtures of nonpolar fluids: Prediction from experimental constants of the components, Int. J. Thermophys. 13 (1992) 1053-1060.
[20] A. Boushehri, E.A. Mason, Equation of state for compressed liquids and their mixtures from the cohesive energy density, Int. J. Thermophys. 14 (1993) 685-697.
[21] M.H. Ghatee, A. Boushehri, Equation of state for compressed liquids from surface tension, Int. J. Thermophys. 17 (1996) 945-957.
[22] H. Eslami, Equation of state for nonpolar fluid mixtures: Prediction from boiling point constants, Int. J. Thermophys. 22 (2001) 1781-1793.
[23] S. Sheikh, M.M. Papari, A. Boushehri, Equation of state and pressure-volume-temperature properties of refrigerants based on speed of sound data, Ind. Eng. Chem. Res. 41 (2002) 3274-3281.
[24] M.M. Papari, A. Razavizadeh, F.Mokhberi, A. Boushehri, Equation of state and p-V-T-x properties of refrigerant mixtures based on speed of sound data, Ind. Eng. Chem. Res. 42 (2003) 3802-3808.
[25] M.J. Lee, C.K. Lo, H.M. Lin, pVT measurements for mixtures of poly(ethylene glycol methyl ether) with poly(ethylene glycol) from 298 K to 338 K and pressures up to 30 MPa, J. Chem. Eng. Data 43 (1998) 1076-1081.
[26] P. Zoller, D.J. Walsh, Standard Pressure-Volume-Temperature Data for Polymers, Technomic Publishing, Lancaster, Pa, 1995.
[27] F. Sabzi, A. Boushehri, Application of the ISMEOS for polymermelts, Eur. Polym. J. 40 (2004) 1105-1110.
[28] J.E. Mark, Polymer Data Handbook, Oxford University Press, New York, 1999.
[29] J. Brandrup, E.H. Immergut, E.A. Grulke, Polymer Handbook, JohnWiley & Sons, New York, 2005.
[30] J.E. Mark, Physical Properties of Polymers Handbook, Springer, New York, 2007.