Effects of porous oxide layer on performance of Pd-based monolithic catalysts for 2-ethylanthraquinone hydrogenation

doi:10.1016/j.cjche.2016.04.032

Chinese Journal of Chemical Engineering ›› 2016, Vol. 24 ›› Issue (11): 1570-1576.DOI: 10.1016/j.cjche.2016.04.032

• 第25届中国过程控制会议专栏 • 上一篇下一篇

Effects of porous oxide layer on performance of Pd-based monolithic catalysts for 2-ethylanthraquinone hydrogenation

Xin Shi¹, Enxian Yuan¹, Guozhu Liu^1,2, Li Wang^1,2

1 Key Laboratory for Green Chemical Technology of the Ministry of Education, School of Chemical Engineering and Technology, Tianjin University, Tianjin 300072, China;
2 Collaborative Innovation Center of Chemical Science and Engineering(Tianjin), Tianjin 300072, China

收稿日期:2016-03-12 修回日期:2016-04-24 出版日期:2016-11-28 发布日期:2016-12-06
通讯作者: Li Wang
基金资助:
Supported by the Sinopec Corp. Scientific Research Projects (414076).

Effects of porous oxide layer on performance of Pd-based monolithic catalysts for 2-ethylanthraquinone hydrogenation

Xin Shi¹, Enxian Yuan¹, Guozhu Liu^1,2, Li Wang^1,2

1 Key Laboratory for Green Chemical Technology of the Ministry of Education, School of Chemical Engineering and Technology, Tianjin University, Tianjin 300072, China;
2 Collaborative Innovation Center of Chemical Science and Engineering(Tianjin), Tianjin 300072, China

Received:2016-03-12 Revised:2016-04-24 Online:2016-11-28 Published:2016-12-06
Contact: Li Wang
Supported by:
Supported by the Sinopec Corp. Scientific Research Projects (414076).

摘要/Abstract

摘要： Pd/oxide/cordieritemonolithic catalysts (oxide=Al₂O₃, SiO₂ and SiO₂-Al₂O₃)were prepared by the impregnation method. The results of ICP, XRD, SEM-EDX, XPS and N₂ adsorption-desorption measurements revealed that the Pd penetration depth increased with increasing the thickness of oxide layer, and the catalysts with Al₂O₃ layers had the larger pore size than those with SiO₂ and SiO₂-Al₂O₃ layers. Catalytic hydrogenation of 2-ethylanthraquinone (eAQ), a key step of the H₂O₂ production by the anthraquinone process, over the various monolithic catalysts (60℃, atmosphere pressure) showed that themonolithic catalystwith the moderate thickness of Al₂O₃ layer (about 6 μm) exhibited the highest conversion of eAQ (99.1%) and hydrogenation efficiency (10.0 g·L^-1). This could be ascribed to the suitable Pd penetration depth and the larger pore size,which provides a balance between the distribution of Pd and accessibility of active sites by the reactants.

关键词: Monolith, Catalyst, Hydrogenation, Anthraquinone, Hydrogen peroxide, Pd

Abstract: Pd/oxide/cordieritemonolithic catalysts (oxide=Al₂O₃, SiO₂ and SiO₂-Al₂O₃)were prepared by the impregnation method. The results of ICP, XRD, SEM-EDX, XPS and N₂ adsorption-desorption measurements revealed that the Pd penetration depth increased with increasing the thickness of oxide layer, and the catalysts with Al₂O₃ layers had the larger pore size than those with SiO₂ and SiO₂-Al₂O₃ layers. Catalytic hydrogenation of 2-ethylanthraquinone (eAQ), a key step of the H₂O₂ production by the anthraquinone process, over the various monolithic catalysts (60℃, atmosphere pressure) showed that themonolithic catalystwith the moderate thickness of Al₂O₃ layer (about 6 μm) exhibited the highest conversion of eAQ (99.1%) and hydrogenation efficiency (10.0 g·L^-1). This could be ascribed to the suitable Pd penetration depth and the larger pore size,which provides a balance between the distribution of Pd and accessibility of active sites by the reactants.

Key words: Monolith, Catalyst, Hydrogenation, Anthraquinone, Hydrogen peroxide, Pd

Xin Shi, Enxian Yuan, Guozhu Liu, Li Wang. Effects of porous oxide layer on performance of Pd-based monolithic catalysts for 2-ethylanthraquinone hydrogenation[J]. Chinese Journal of Chemical Engineering, 2016, 24(11): 1570-1576.

Xin Shi, Enxian Yuan, Guozhu Liu, Li Wang. Effects of porous oxide layer on performance of Pd-based monolithic catalysts for 2-ethylanthraquinone hydrogenation[J]. Chin.J.Chem.Eng., 2016, 24(11): 1570-1576.

参考文献

[1] V. Russo, R. Tesser, E. Santacesaria, M. Di Serio, Chemical and technical aspects of propene oxide production via hydrogen peroxide (HPPO process), Ind. Eng. Chem. Res. 52(3) (2013) 1168-1178.
[2] A. Okninski, B. Bartkowiak, K. Sobczak, D. Kublik, P. Surmacz, G. Rarata, B.Marciniak, P.Wolanski, Development of a small green bipropellant rocket engine using hydrogen peroxide as oxidizer, 50th AIAA/ASME/SAE/ASEE joint propulsion conference, American, 2014.
[3] H.M. Chen, D.P. Huang, X.Y. Su, J.L. Huang, X.L. Jing,M.M. Du, D.H. Sun, L.S. Jia, Q.B. Li, Fabrication of Pd/γ-Al₂O₃ catalysts for hydrogenation of 2-ethyl-9,10-anthraquinone assisted by plant-mediated strategy, Chem. Eng. J. 262(2015) 356-363.
[4] Y.X. Cheng, L.Wang, S.X. Lü, Y.Q.Wang, Z.T. Mi, Gas-liquid-liquid three-phase reactive extraction for the hydrogen peroxide, Ind. Eng. Chem. Res. 47(2008) 7414-7418.
[5] G.Z. Liu, Y. Duan, Y.Q. Wang, L.Wang, Z.T. Mi, Periodically operated trickle-bed reactor for EAQs hydrogenation:Experiments and modeling, Chem. Eng. Sci. 60(22) (2005) 6270-6278.
[6] J. Petr, L. Kurc, Z. Bělohlav, L. Červený, Catalytic hydrogenation of 2-ethyl-9,10-anthrahydroquinone, Chem. Eng. Process. 43(7) (2004) 887-894.
[7] A. Drelinkiewicz, A. Pukkinen, R. Kangas, R. Laitinen, Hydrogenation of 2-ethylanthraquinone over Pd-SiO₂ and Pd-Al₂O₃ in the fixed-bed reactor. The effect of the type of support, Catal. Lett. 94(2004) 157-170.
[8] A. Drelinkiewicz, Kinetic aspects in the selectivity of deep hydrogenation of 2-ethylanthraquinone over Pd-SiO₂, J. Mol. Catal. A Chem. 101(2004) 61-74.
[9] R. Kosydar, A. Drelinkiewicz, J.P. Ganhy, Degradation reactions in anthraquinone process of hydrogen peroxide synthesis, Catal. Lett. 139(3-4) (2010) 105-113.
[10] E. Santacesaria, M. Di Serio, A. Russo, U. Leone, R. Velotti, Kinetic and catalytic aspects in the hydrogen peroxide production via anthraquinone, Chem. Eng. Sci. 54(1999) 2799-2806.
[11] J. Tan, J.S. Zhang, Y.C. Lu, J.H. Xu, G.S. Luo, Process intensification of catalytic hydrogenation of ethylanthraquinone with gas-liquid microdispersion, AIChE J 58(5) (2012) 1326-1335.
[12] C.N. Dai, Z.G. Lei, Y.L. Wang, R.D. Zhang, B.H. Chen, Transfer and reaction performances of selective catalytic reduction of N₂O with CO over monolith catalysts, Chin. J. Chem. Eng. 21(8) (2013) 835-843.
[13] D.I. Enache, P.E. Landon, M.V. Lok, S.D. Pollington, E.H. Stitt, Direct comparison of a trickle bed and a monolith for hydrogenation of pyrolysis gasoline, Ind. Eng. Chem. Res. 44(2005) 9431-9439.
[14] R.M. Machado, R.R. Broekhuis, A.F. Nordquist, B.P. Roy, S.R. Carney, Applying monolith reactors for hydrogenations in the production of specialty chemicals-process and economic considerations, Catal. Today 105(3-4) (2005) 305-317.
[15] S. Roy, T. Bauer,M. Al-Dahhan, P. Lehner, T. Turek,Monoliths as multiphase reactors:A review, AIChE J 50(2004) 2918-2938.
[16] S. Roy, A.K. Heibel,W. Liu, T. Boger, Design ofmonolithic catalysts formultiphase reactions, Chem. Eng. Sci. 59(5) (2004) 957-966.
[17] P. Avila, M. Montes, E.E. Miró, Monolithic reactors for environmental applications, Chem. Eng. J. 109(1-3) (2005) 11-36.
[18] J.C. Zhou, D.F. Wu, W. Jiang, Y.D. Li, Catalytic combustion of toluene over a copper-manganese-silver mixed-oxide catalyst supported on a washcoated ceramicmonolith, Chem. Eng. Technol. 32(10) (2009) 1520-1526.
[19] C.N. Dai, Z.G. Lei, J. Zhang, Y.X. Li, B.H. Chen, Monolith catalysts for the alkylation of benzene with propylene, Chem. Eng. Sci. 100(2013) 342-351.
[20] Q.Y. Li, P.Y. Wu, L. Lan, H. Liu, F. Ji, The effect of Ca on structure and performance of hydrodesulfurization of Ca-Ni₂P/SBA-15/cord monolithic catalysts, Catal. Today 216(2013) 38-43.
[21] N. Wei, S.F. Ji, P.Y. Wu, Y.A. Guo, H. Liu, J.Q. Zhu, C.Y. Li, Preparation of nickel phosphide/SBA-15/cordierite monolithic catalysts and catalytic activity for hydrodesulfurization of dibenzothiophene, Catal. Today 147(2009) S66-S70.
[22] W. Liu, Y. Wang, W. Wayne, L. Shari, A compact and high throughput reactor of monolithic-structured catalyst bed for conversion of syngas to liquid fuels, AIChE J 58(9) (2012) 2820-2829.
[23] L.Wang, D.D. Zhao, S.J. Pu, G.Z. Liu, Remarkable catalytic activities of hydrothermally synthesized bilayered HZSM-5 coatings with additional nonzeolite pores, Ind. Eng. Chem. Res. 54(19) (2015) 5246-5253.
[24] M.L. Ji, G.Z. Liu, L.Wang, X.W. Zhang, Controllable fabrication and catalytic activity of highlyb-oriented HZSM-5 coatings, AIChE J 60(6) (2014) 1964-1968.
[25] A. Devard, M.A. Ulla, F.A. Marchesini, Synthesis of Pd/Al₂O₃ coating onto a cordierite monolith and its application to nitrite reduction in water, Catal. Commun. 34(2013) 26-29.
[26] Z.W. Liu, Q.F. Zhu, N. Hou, Y. Fu, L.X.Wen, J.F. Chen, Development of novelmonolithic catalyst with porous hollow silica nanoparticles for selective hydrogenation reactions, Catal. Today 216(2013) 205-210.
[27] J. Zhu, F. Wu, M.S. Li, J.J. Zhu, J.G. van Ommen, L. Lefferts, Influence of internal diffusion on selective hydrogenation of 4-carboxybenzaldehyde over palladium catalysts supported on carbon nanofiber coated monolith, Appl. Catal. A Gen. 498(2015) 222-229.
[28] S. Irandoust, B. Andersson, E. Bengtsson, M. Siverstrom, Scaling up of a monolithic catalyst reactor with two-phase flow, Ind. Eng. Chem. Res. 28(1989) 1489-1493.
[29] D.S. Liu, J.G. Zhang, D.F. Li, Q.D. Kong, T. Zhang, S.D. Wang, Hydrogenation of 2-ethylanthraquinone under Taylor flow in single square channel monolith reactors, AIChE J 55(3) (2009) 726-736.
[30] J.G. Zhang, D.F. Li, Y.J. Zhao, Q.D. Kong, S.D. Wang, A Pd/Al₂O₃/cordierite monolithic catalyst for hydrogenation of 2-ethylanthraquinone, Catal. Commun. 9(15) (2008) 2565-2569.
[31] X.T. Li, H.J. Su, G.Y. Ren, S.D. Wang, A highly stable Pd/SiO₂/cordierite monolith catalyst for 2-ethyl-anthraquinone hydrogenation, RSC Adv. 5(122) (2015) 100968-100977.
[32] R.E. Albers, M. Nyström, M. Siverström, A. Sellin, A.-C. Dellve, U. Andersson, W. Herrmann, T. Berglin, Development of a monolith-based process for H₂O₂ production-from idea to large-scale implementation, Catal. Today 69(2001) 247-252.
[33] A. Drelinkiewicz, R. Kangas, R. Laitinen, A. Pukkinen, J. Pursiainen, Hydrogenation of 2-ethylanthraquinone on alumina-supported palladium catalysts, Appl. Catal. A Gen. 263(1) (2004) 71-82.
[34] A.S. Ivanova, E.M. Slavinskaya, R.V. Gulyaev, V.I. Zaikovskii, O.A. Stonkus, I.G. Danilova, L.M. Plyasova, I.A. Polukhina, A.I. Boronin, Metal-support interactions in Pt/Al₂O₃ and Pd/Al₂O₃ catalysts for CO oxidation, Appl. Catal. B Environ. 97(1-2) (2010) 57-71.
[35] M. Thommes, K.A. Cychosz, Physical adsorption characterization of nanoporous materials:Progress and challenges, Adsorption 20(2-3) (2014) 233-250.
[36] H. Shang, H.J. Zhou, Z.H. Zhu,W.H. Zhang, Study on the new hydrogenation catalyst and processes for hydrogen peroxide through anthraquinone route, J. Ind. Eng. Chem. 18(5) (2012) 1851-1857.
[37] J.T. Feng, H.Y. Wang, G.E. David, X. Duan, D.Q. Li, Catalytic hydrogenation of ethylanthraquinone over highly dispersed eggshell Pd/SiO₂-Al₂O₃ spherical catalysts, Appl. Catal. A Gen. 382(2) (2010) 240-245.
[38] F. Sheng, C.X. Zhao, C.H. He, J.Q. Liu, J.H. Sun, Densities and viscosities of binary mixtures of tris(2-ethylhexyl) phosphate + cyclohexane or n-hexane at T=(293.15, 298.15, and 303.15) K and p=0.1 MPa, J. Chem. Eng. Data 53(2008) 2718-2720.
[39] M.I. Aralaguppi, C.V. Jadar, T.M. Aminabhavi, Density, refractive index, viscosity, and speed of sound in binary mixtures of cyclohexanone with benzene, methylbenzene, 1,4-dimethylbenzene, 1,3,5-trimethylbenzene, and methoxybenzene in the temperature interval (298.15 to 308.15) K, J. Chem. Eng. Data 44(1999) 446-450.

Effects of porous oxide layer on performance of Pd-based monolithic catalysts for 2-ethylanthraquinone hydrogenation

Effects of porous oxide layer on performance of Pd-based monolithic catalysts for 2-ethylanthraquinone hydrogenation

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	Jinlong Liu, Chenye Wang, Xingrui Wang, Chen Zhao, Huiquan Li, Ganyu Zhu, Jianbo Zhang. Reconstruction and recovery of anatase TiO₂ from spent selective catalytic reduction catalyst by NaOH hydrothermal method[J]. 中国化学工程学报, 2023, 60(8): 53-60.
[2]	Yifan Jiang, Bingqi Xie, Jisong Zhang. Highly reactive and reusable heterogeneous activated carbons-based palladium catalysts for Suzuki-Miyaura reaction[J]. 中国化学工程学报, 2023, 60(8): 165-172.
[3]	Peipei Ai, Huiqing Jin, Jie Li, Xiaodong Wang, Wei Huang. Ultra-stable Cu-based catalyst for dimethyl oxalate hydrogenation to ethylene glycol[J]. 中国化学工程学报, 2023, 60(8): 186-193.
[4]	Xiaolin Guo, Zhaoyang Zhang, Pengfei Xing, Shuai Wang, Yibing Guo, Yanxin Zhuang. Kinetic mechanism of copper extraction from methylchlorosilane slurry residue using hydrogen peroxide as oxidant[J]. 中国化学工程学报, 2023, 60(8): 228-234.
[5]	Yuehua Liu, Lili Chen, Shoujun Liu, Song Yang, Ju Shangguan. Role of iron-based catalysts in reducing NO_x emissions from coal combustion[J]. 中国化学工程学报, 2023, 59(7): 1-8.
[6]	Fei Li, Xuemei Wang, Pengze Zhang, Qinqin Wang, Mingyuan Zhu, Bin Dai. Nitrogen and phosphorus co-doped activated carbon induces high density Cu⁺ active center for acetylene hydrochlorination[J]. 中国化学工程学报, 2023, 59(7): 193-199.
[7]	Qunfeng Zhang, Bingcheng Li, Yuan Zhou, Deshuo Zhang, Chunshan Lu, Feng Feng, Jinghui Lv, Qingtao Wang, Xiaonian Li. Regulation of the selective hydrogenation performance of sulfur-doped carbon-supported palladium on chloronitrobenzene[J]. 中国化学工程学报, 2023, 58(6): 69-75.
[8]	Bing Liu, Yingjiao Li, Moses Arowo, Guangwen Chu, Yong Luo, Liangliang Zhang, Haikui Zou, Baochang Sun. Sulfonation of 1, 4-diaminoanthraquinone leuco by chlorosulfonic acid: Kinetics and process intensification[J]. 中国化学工程学报, 2023, 58(6): 163-169.
[9]	Jiajia Chen, Xinyu Lu, Dandan Wang, Pengcheng Xiu, Xiaoli Gu. Effective depolymerization of alkali lignin using an attapulgite-Ce_0.75Zr_0.25O₂(ATP-CZO)-supported cobalt catalyst in ethanol/isopropanol media[J]. 中国化学工程学报, 2023, 57(5): 50-62.
[10]	Bin Gao, Junwen Chen, Qi Zuo, Hongyan Wang, Wenlin Li. The critical role of Zr in controlling the activity of Pd/Beta on the hydrogenation of phenol to cyclohexanone[J]. 中国化学工程学报, 2023, 57(5): 79-87.
[11]	Linlin Su, Meijun Chen, Li Gong, Hua Yang, Chao Chen, Jun Wu, Ling Luo, Gang Yang, Lulu Long. Boost activation of peroxymonosulfate by iron doped K_2-xMn₈O₁₆: Mechanism and properties[J]. 中国化学工程学报, 2023, 57(5): 88-97.
[12]	Qi Yang, Weikang Dai, Maoshuai Li, Jie Wei, Yi Feng, Cheng Yang, Wanxin Yang, Ying Zheng, Jie Ding, Mei-Yan Wang, Xinbin Ma. Enhanced selective hydrogenation of glycolaldehyde to ethylene glycol over Cu⁰-Cu⁺ sites[J]. 中国化学工程学报, 2023, 57(5): 141-150.
[13]	Bingxiao Feng, Lining Hao, Chaoting Deng, Jiaqiang Wang, Hongbing Song, Meng Xiao, Tingting Huang, Quanhong Zhu, Hengjun Gai. A highly hydrothermal stable copper-based catalyst for catalytic wet air oxidation of m-cresol in coal chemical wastewater[J]. 中国化学工程学报, 2023, 57(5): 338-348.
[14]	Shujun Peng, Song Lei, Sisi Wen, Jian Xue, Haihui Wang. A Ruddlesden–Popper oxide as a carbon dioxide tolerant cathode for solid oxide fuel cells that operate at intermediate temperatures[J]. 中国化学工程学报, 2023, 56(4): 25-32.
[15]	Da Ke, Minjia Wang, Jiancheng Ruan, Xinzhi Chen, Shaodong Zhou. Efficient, continuous oxidation of durene to pyromellitic dianhydride mediated by a V-Ti-P ternary catalyst: The remarkable doping effect[J]. 中国化学工程学报, 2023, 55(3): 156-164.