[1] J.J. Chalmers, Mixing, aeration and cell damage, 30+ years later:What we learned, how it affected the cell culture industry and what we would like to know more about, Curr. Opin. Chem. Eng. 10(2015) 94-102.[2] M.P. Dudukovic, Frontiers in reactor engineering, Science 325(2009) 698-701.[3] M.-L. Collignon, A. Delafosse, M. Crine, D. Toye, Axial impeller selection for anchorage dependent animal cell culture in stirred bioreactors:Methodology based on the impeller comparison at just-suspended speed of rotation, Chem. Eng. Sci. 65(2010) 5929-5941.[4] C. Haringa, W. Tang, A.T. Deshmukh, J. Xia, M. Reuss, J.J. Heijnen, R.F. Mudde, H.J. Noorman, Euler-Lagrange computational fluid dynamics for (bio)reactor scale down:An analysis of organism lifelines, Eng. Life Sci. 16(2016) 652-663.[5] R.M. Shenkman, R. Godoy-Silva, K.K. Papas, J.J. Chalmers, Effects of energy dissipation rate on islets of langerhans:Implications for isolation and transplantation, Biotechnol. Bioeng. 103(2009) 413-423.[6] A. Shaikh, M. Al-Dahhan, Scale-up of bubble column reactors:A review of current state-of-the-art, Ind. Eng. Chem. Res. 52(2013) 8091-8108.[7] A. Cruz, L. Couto, S. Esplugas, C. Sans, Study of the contribution of homogeneous catalysis on heterogeneous Fe(Ⅲ)/alginate mediated photo-Fenton process, Chem. Eng. J. 318(2017272-280.[8] K. Guo, T. Wang, G. Yang, J. Wang, Distinctly different bubble behaviors in a bubble column with pure liquids and alcohol solutions, J. Chem. Technol. Biotechnol. 92(2017) 432-441.[9] G. Besagni, F. Inzoli, G. de Guido, L.A. Pellegrini, Experimental investigation on the influence of ethanol on bubble column hydrodynamics, Chem. Eng. Res. Des. 112(2016) 1-15.[10] M. Moo-Young, M. Butler, C. Webb, A. Moreira, B. Grodzinski, Z.F. Cui, S. Agathos, Comprehensive Biotechnology, 2nd ed. Elsevier, 2011.[11] S. Laorrattanasak, W. Rongsayamanont, N. Khondee, N. Paorach, S. Soonglerdsongpha, O. Pinyakong, E. Luepromchai, Production and application of Gordonia westfalica GY40 biosurfactant for remediation of fuel oil spill, Water Air Soil Pollut. (2016227-325.[12] S. Yao, S. Zhao, Z. Lu, Y. Gao, F. Lv, X. Bie, Control of agitation and aeration rates in the production of surfactin in foam overflowing fed-batch culture with industrial fermentation, Rev. Argent. Microbiol. 47(2015) 344-349.[13] V. Rangarajan, R. Sen, An inexpensive strategy for facilitated recovery of metals and fermentation products by foam fractionation process, Colloids Surf. B 104(2013) 99-106.[14] S. Chenikher, J.S. Guez, F. Coutte, M. Pekpe, P. Jacques, J.P. Cassar, Control of the specific growth rate of Bacillus Subtilis for the production of biosurfactant lipopeptides in bioreactors with foam overflow, Process Biochem. 45(2010) 1800-1807.[15] J.S. Guez, S. Chenikher, J.P. Cassar, P. Jacques, Setting up and modelling of overflowing fed-batch cultures of Bacillus Subtilis for the production and continuous removal of lipopeptides, J. Biotechnol. 131(2007) 67-75.[16] M. Vesvikar, M.H. Al-Dahhan, Hydrodynamics investigation of laboratory-scale internal gas-lift loop anaerobic digester using non-invasive CAPRT technique, Biomass Bioenergy 84(2016) 98-106.[17] G. Salierno, M. Maestri, S. Piovano, M. Cassanello, M.A. Cardona, D. Hojman, H. Somacal, Calcium alginate beads motion in a foaming three-phase bubble column, Chem. Eng. J. 324(2017) 358-369.[18] B. Lee, P. Ravindra, E. Chan, Size and shape of calcium alginate beads produced by extrusion dripping, Chem. Eng. Technol. 36(2013) 1627-1642.[19] N.E. Holden, Neutron Capture Cross Section Standards for BNL 325, 4th edition National Nuclear Data Center. Brookhaven National Laboratory, 1981.[20] G. Salierno, Caracterización de equipos y medios multifásicos con métodos que emplean fuentes radiactivas PhD Thesis, Universidad de Buenos Aires, Argentina, 2016(http://digital.bl.fcen.uba.ar/Download/Tesis/Tesis_5951_Salierno.pdf).[21] J. Chaouki, F. Larachi, M.P. Dudukovic (Eds.), Non-Invasive Monitoring of Multiphase Flows, Elsevier, Amsterdam, 1997.[22] F. Larachi, M. Cassanello, J. Chaouki, C. Guy, Flow structure of the solids in a 3-D gas-liquid-solid fluidized bed, AICHE J. 42(19962439-2452.[23] S. Degaleesan, M.P. Dudukovic, Y. Pan, Experimental study of gas-induced liquidflow structures in bubble columns, AICHE J. 47(2001) 1913-1931.[24] S.S. Barretto, F. Michoux, K. Hellgardt, P.J. Nixon, Pneumatic hydrodynamics influence transplastomic protein yields and biological responses during in vitro shoot regeneration of Nicotiana tabacum callus:Implications for bioprocess routes to plant-made biopharmaceuticals, Biochem. Eng. J. 117((2017) 73-81.[25] Y. Liu, Z.-J. Wang, J.-Y. Xia, C. Haringa, Y.-P. Liu, J. Chu, Y.-P. Zhuang, S.-L. Zhanga, Application of Euler-Lagrange CFD for quantitative evaluating the effect of shear force on Carthamus tinctorius L. cell in a stirred tank bioreactor, Biochem. Eng. J. 114(2016209-217.[26] A. Braga, D.P. Mesquita, A.L. Amaral, E.C. Ferreira, I. Belo, Aroma production by Yarrowia lipolytica in airlift and stirred tank bioreactors:Differences in yeast metabolism and morphology, Biochem. Eng. J. 93(2015) 55-62.[27] C. Zhong, Y.-J. Yuan, Responses of Taxus cuspidata to hydrodynamics inbubblecolumn bioreactors with different sparging nozzle sizes, Biochem. Eng. J. 45(2009) 100-106.[28] G. Salierno, M. Maestri, S. Piovano, M. Cassanello, M.A. Cardona, D. Hojman, H. Somacal, Discrete axial motion of a radioactive tracer reconstructed from the response of axially aligned detectors:Application to the analysis of a bubble column dynamics, Chem. Eng. Sci. 100(2013) 402-412.[29] A. Ben-Naim, Statistical Thermodynamics Based on Information, World Scientific Publishing Co. Pte. Ltd., Singapore, 2008.[30] G. Besagni, F. Inzoli, The effect of liquid phase properties on bubble column fluid dynamics:Gas holdup, flow regime transition, bubble size distributions and shapes, interfacial areas and foaming phenomena, Chem. Eng. Sci. 170(2017270-296.[31] D. Rudkevitch, A. Macchi, Hydrodynamics of a high pressure three-phase fluidized bed subject to foaming, Can. J. Chem. Eng. 86(2008293-301. |