Modeling of thermal conductivity and density of alumina/silica in water hybrid nanocolloid by the application of Artificial Neural Networks

doi:10.1016/j.cjche.2018.07.018

中国化学工程学报 ›› 2019, Vol. 27 ›› Issue (3): 726-736.DOI: 10.1016/j.cjche.2018.07.018

• Materials and Product Engineering • 上一篇

Modeling of thermal conductivity and density of alumina/silica in water hybrid nanocolloid by the application of Artificial Neural Networks

Sathishkumar Kannaiyan¹, Chitra Boobalan¹, Fedal Castro Nagarajan², Srinivas Sivaraman¹

1 Department of Chemical Engineering, Sri Sivasubramaniya Nadar College of Engineering, Kalavakkam, Chennai 603 110, India;
2 Department of Mechanical Engineering, Aarupadai Veedu Institute of Technology, Paiyanoor, India

收稿日期:2018-03-30 修回日期:2018-07-02 出版日期:2019-03-28 发布日期:2019-04-25
通讯作者: Chitra Boobalan,E-mail address:chitrab@ssn.edu.in

Modeling of thermal conductivity and density of alumina/silica in water hybrid nanocolloid by the application of Artificial Neural Networks

Sathishkumar Kannaiyan¹, Chitra Boobalan¹, Fedal Castro Nagarajan², Srinivas Sivaraman¹

1 Department of Chemical Engineering, Sri Sivasubramaniya Nadar College of Engineering, Kalavakkam, Chennai 603 110, India;
2 Department of Mechanical Engineering, Aarupadai Veedu Institute of Technology, Paiyanoor, India

Received:2018-03-30 Revised:2018-07-02 Online:2019-03-28 Published:2019-04-25
Contact: Chitra Boobalan,E-mail address:chitrab@ssn.edu.in

摘要/Abstract

摘要： In this research work, the thermal conductivity and density of alumina/silica (Al₂O₃/SiO₂) in water hybrid nanofluids at different temperatures and volume concentrations have been modeled using the artificial neural networks (ANN). The nanocolloid involved in the study was synthesized by the two-step method and characterized by XRD, TEM, SEM-EDX and zeta potential analysis. The properties of the synthesized nanofluid were measured at various volume concentrations (0.05%, 0.1% and 0.2%) and temperatures (20 to 60℃). Established on the observational data and ANN, the optimum neural structure was suggested for predicting the thermal conductivity and density of the hybrid nanofluid as a function of temperature and solid volume concentrations. The results indicate that a neural network with 2 hidden layers and 10 neurons have the lowest error and a highest fitting coefficient of thermal conductivity, whereas in the case of density, the structure with 1 hidden layer consisting of 4 neurons proved to be the optimal structure.

关键词: Thermal conductivity, Modeling, hybrid nanocolloids, ANN, thermal energy

Abstract: In this research work, the thermal conductivity and density of alumina/silica (Al₂O₃/SiO₂) in water hybrid nanofluids at different temperatures and volume concentrations have been modeled using the artificial neural networks (ANN). The nanocolloid involved in the study was synthesized by the two-step method and characterized by XRD, TEM, SEM-EDX and zeta potential analysis. The properties of the synthesized nanofluid were measured at various volume concentrations (0.05%, 0.1% and 0.2%) and temperatures (20 to 60℃). Established on the observational data and ANN, the optimum neural structure was suggested for predicting the thermal conductivity and density of the hybrid nanofluid as a function of temperature and solid volume concentrations. The results indicate that a neural network with 2 hidden layers and 10 neurons have the lowest error and a highest fitting coefficient of thermal conductivity, whereas in the case of density, the structure with 1 hidden layer consisting of 4 neurons proved to be the optimal structure.

Key words: Thermal conductivity, Modeling, hybrid nanocolloids, ANN, thermal energy

Sathishkumar Kannaiyan, Chitra Boobalan, Fedal Castro Nagarajan, Srinivas Sivaraman. Modeling of thermal conductivity and density of alumina/silica in water hybrid nanocolloid by the application of Artificial Neural Networks[J]. 中国化学工程学报, 2019, 27(3): 726-736.

参考文献 21

[1]	Y. Xuan, Q. Li, Heat transfer enhancement of nanofluids, Int. J. Heat Fluid Flow 21(2000) 58-64.
[2]	C.T. Nguyen, G. Roy, C. Gauthier, N. Galanis, Heat transfer enhancement using Al2O3-water nanofluid for an electronic liquid cooling system, Appl. Therm. Eng. 27(2007) 1501-1506.
[3]	M. Nazari, M. Karami, M. Ashouri, Comparing the thermal performance of water, ethylene glycol, alumina and CNT nanofluids in CPU cooling:experimental study, Exp. Thermal Fluid Sci. 57(2014) 371-377.
[4]	M.R. Sohel, S.S. Khaleduzzaman, R. Saidur, A. Hepbasli, M.F.M. Sabri, I.M. Mahbubul, An experimental investigation of heat transfer enhancement of a minichannel heat sink using Al2O3-H2O nanofluid, Int. J. Heat Mass Transf. 74(2014) 164-172.
[5]	S.N. Shoghl, J. Jamali, M.K. Moraveji, Electrical conductivity, viscosity, and density of different nanofluids:an experimental study, Exp. Thermal Fluid Sci. 74(2016) 339-346.
[6]	J.V. Tu, Advantages and disadvantages of using artificial neural networks versus logistic regression for predicting medical outcomes, J. Clin. Epidemiol. 49(1996) 1225-1231.
[7]	E. Ahmadloo, S. Azizi, Prediction of thermal conductivity of various nanofluids using artificial neural network, Int. Commun. Heat Mass Transf. 74(2016) 69-75.
[8]	G.A. Longo, C. Zilio, E. Ceseracciu, M. Reggiani, Application of artificial neural network (ANN) for the prediction of thermal conductivity of oxide-water nanofluids, Nano Energy 1(2012) 290-296.
[9]	M.A. Ariana, B. Vaferi, G. Karimi, Prediction of thermal conductivity of alumina water-based nanofluids by artificial neural networks, Powder Technol. 278(2015) 1-10.
[10]	A. Aminian, Predicting the effective thermal conductivity of nanofluids for intensification of heat transfer using artificial neural network, Powder Technol. 301(2016) 288-309.
[11]	M.H. Esfe, S. Saedodin, N. Sina, M. Afrand, S. Rostami, Designing an artificial neural network to predict thermal conductivity and dynamic viscosity of ferromagnetic nanofluid, Int. Commun. Heat Mass Transf. 68(2015) 50-57.
[12]	M.H. Esfe, M. Afrand, W.M. Yan, M. Akbari, Applicability of artificial neural network and nonlinear regression to predict thermal conductivity modeling of Al2O3-water nanofluids using experimental data, Int. Commun. Heat Mass Transf. 66(2015) 246-249.
[13]	M. Hojjat, S.G. Etemad, R. Bagheri, J. Thibault, Thermal conductivity of non-Newtonian nanofluids:experimental data and modeling using neural network, Int. J. Heat Mass Transf. 54(2011) 1017-1023.
[14]	H. Kurt, M. Kayfeci, Prediction of thermal conductivity of ethylene glycol-water solutions by using artificial neural networks, Appl. Energy 86(2009) 2244-2248.
[15]	H. Karimi, F. Yousefi, Application of artificial neural network-genetic algorithm (ANN-GA) to correlation of density in nanofluids, Fluid Phase Equilib. 336(2012) 79-83.
[16]	M.H. Esfe, S. Wongwises, A. Naderi, A. Asadi, M.R. Safaei, H. Rostamian, A. Karimipour, Thermal conductivity of Cu/TiO2-water/EG hybrid nanofluid:experimental data and modeling using artificial neural network and correlation, Int. Commun. Heat Mass Transf. 66(2015) 100-104.
[17]	T. Hayat, S. Nadeem, Heat transfer enhancement with Ag-CuO/water hybrid nanofluid, Results Phys. 7(2017) 2317-2324.
[18]	Kota Sreenivasa Rao, Khalil El-Hami, Tsutomu Kodaki, Kazumi Matsushige, Keisuke Makino, A novel method for synthesis of silica nanoparticles, J. Colloid Interface Sci. 289(2005) 125-131.
[19]	Akanksha Paraye, S.R Mote, Synthesis of alumina nano-particles and study of heat transfer enhancement, Int. J. Eng. Econ. Manag. 3(2) (2015) 1-3.
[20]	Rajesh Choudhary, Deepak Khurana, Aditya Kumar, Sudhakar Subudhi, Stability analysis of Al2O3/water nanofluids, J. Exp. Nanosci. 12(2017) 140-151.
[21]	Ningbo Zhao, Zhiming Li, Experimental and artificial neural network prediction of thermal conductivity and viscosity for alumina-water nanofluids, Materials 10(2017) 552.

Modeling of thermal conductivity and density of alumina/silica in water hybrid nanocolloid by the application of Artificial Neural Networks

Modeling of thermal conductivity and density of alumina/silica in water hybrid nanocolloid by the application of Artificial Neural Networks

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献 21

相关文章 15

编辑推荐

Metrics

本文评价

[1]	Jindong Dai, Chi Zhai, Jiali Ai, Guangren Yu, Haichao Lv, Wei Sun, Yongzhong Liu. A cellular automata framework for porous electrode reconstruction and reaction-diffusion simulation[J]. 中国化学工程学报, 2023, 60(8): 262-274.
[2]	Borui Liu, Tao Zhang, Yi Zheng, Kailong Li, Hui Pan, Hao Ling. A dynamic control structure of liquid-only transfer stream distillation column[J]. 中国化学工程学报, 2023, 59(7): 135-145.
[3]	Danlei Chen, Yiqing Luo, Xigang Yuan. Cascade refrigeration system synthesis based on hybrid simulated annealing and particle swarm optimization algorithm[J]. 中国化学工程学报, 2023, 58(6): 244-255.
[4]	Guangyuan Chen, Tong Zhou, Meng Zhang, Zhongxiang Ding, Zhikun Zhou, Yuanhui Ji, Haiying Tang, Changsong Wang. Effects of heavy metal ions Cu²⁺/Pb²⁺/Zn²⁺ on kinetic rate constants of struvite crystallization[J]. 中国化学工程学报, 2023, 57(5): 10-16.
[5]	Haike Li, Xindong Li, Guozai Ouyang, Lang Li, Zhaohuang Zhong, Meng Cai, Wenhao Li, Wanfu Huang. Tannic acid/Fe³⁺ interlayer for preparation of high-permeability polyetherimide organic solvent nanofiltration membranes for organic solvent separation[J]. 中国化学工程学报, 2023, 57(5): 17-29.
[6]	Yujia Cui, Zhiqiang Tan, Yanan Wang, Shuxian Shi, Xiaonong Chen. One-step crosslinking preparation of tannic acid particles for the adsorption and separation of cationic dyes[J]. 中国化学工程学报, 2023, 57(5): 309-318.
[7]	Ming Chen, Huiyan Jiao, Jun Li, Zhibin Wang, Feng He, Yang Jin. Liquid–liquid two-phase flow in a wire-embedded concentric microchannel: Flow pattern and mass transfer performance[J]. 中国化学工程学报, 2023, 56(4): 281-289.
[8]	Qi Han, Xin-Yuan Zhang, Hai-Bo Wu, Xian-Tai Zhou, Hong-Bing Ji. Different efficiency toward the biomimetic aerobic oxidation of benzyl alcohol in microchannel and bubble column reactors: Hydrodynamic characteristics and gas–liquid mass transfer[J]. 中国化学工程学报, 2023, 55(3): 84-92.
[9]	Chunxin Fan, Zini Guo, Jianhong Luo. Study on an improved rotating microchannel separator in the intensification for demulsification and separation process[J]. 中国化学工程学报, 2023, 55(3): 181-191.
[10]	Bowen Jiang, Jia Liu, Guoqiang Yang, Zhibing Zhang. Efficient conversion of CO₂ into cyclic carbonates under atmospheric by halogen and metal-free poly(ionic liquid)s[J]. 中国化学工程学报, 2023, 55(3): 202-211.
[11]	Hany M. Abd El-Lateef, Mai M. Khalaf, K. Shalabi, Antar A. Abdelhamid. Multicomponent synthesis and designing of tetrasubstituted imidazole compounds catalyzed via ionic-liquid for acid steel corrosion protection: Experimental exploration and theoretical calculations[J]. 中国化学工程学报, 2023, 55(3): 304-319.
[12]	Jianhui Zhou, Guohao Du, Jianfeng Hu, Xin Lai, Shan Liu, Zhengguo Zhang. The establishment of Boron nitride@sodium alginate foam/polyethyleneglycol composite phase change materials with high thermal conductivity, shape stability, and reusability[J]. 中国化学工程学报, 2023, 54(2): 11-21.
[13]	Qinyan Wang, Yang Jin, Jun Li, Yongbo Zhou, Ming Chen. Study on liquid–liquid two-phase mass transfer characteristics in the microchannel with deformed insert[J]. 中国化学工程学报, 2023, 54(2): 114-126.
[14]	Jian Tian, Gen Li, Wang He, Kok Bing Tan, Daohua Sun, Junfu Wei, Qingbiao Li. Insight into the dynamic adsorption behavior of graphene oxide multichannel architecture toward contaminants[J]. 中国化学工程学报, 2023, 53(1): 124-132.
[15]	Xibao Zhang, Zhenghong Luo. Bubble size modeling approach for the simulation of bubble columns[J]. 中国化学工程学报, 2023, 53(1): 194-200.