SCI和EI收录∣中国化工学会会刊

中国化学工程学报 ›› 2019, Vol. 27 ›› Issue (4): 811-817.DOI: 10.1016/j.cjche.2018.05.009

• Separation Science and Engineering • 上一篇    下一篇

Separation of methyl linolenate and its analogues by functional mixture of imidazolium based ionic liquid-organic solvent-cuprous salt

Xianghong Lu, Jiajian Zhu, Xing Qian, Jianbing Ji   

  1. Zhejiang Provincial Key Laboratory of Biofuel, College of Chemical Engineering, Zhejiang University of Technology, Hangzhou 310014, China
  • 收稿日期:2018-03-08 修回日期:2018-05-07 出版日期:2019-04-28 发布日期:2019-06-14
  • 通讯作者: Xianghong Lu, Jianbing Ji

Separation of methyl linolenate and its analogues by functional mixture of imidazolium based ionic liquid-organic solvent-cuprous salt

Xianghong Lu, Jiajian Zhu, Xing Qian, Jianbing Ji   

  1. Zhejiang Provincial Key Laboratory of Biofuel, College of Chemical Engineering, Zhejiang University of Technology, Hangzhou 310014, China
  • Received:2018-03-08 Revised:2018-05-07 Online:2019-04-28 Published:2019-06-14
  • Contact: Xianghong Lu, Jianbing Ji

摘要: Methyl linolenate was separated from its analogues by a new extraction system constructed by solvent, imidazolium based ionic liquids and cuprous salt. Firstly, the effect of ionic liquid on the dissolution of CuCl in acetonitrile, N,N-dimethylformamide (DMF), methanol and water was evaluated by visual observation.[C4Mim] [Cl] can improve the dissolution of CuCl in acetonitrile. Then, for the new system as acetonitrile-ILs-CuCl, extraction equilibrium, distribution ratio and selectivity of methyl linolenate and its analogues were determined by gas chromatography analysis and the mass balance. The extraction time, IL structures and CuCl concentrations were investigated. Distribution ratio decreased slightly, but selectivity increased significantly with the addition of CuCl,[C4Mim] [Cl] or[C4Vim] [NTF2] into acetonitrile.[C4Vim] [NTF2] had higher selectivity than[C4Mim] [Cl]. But the selectivity of the system combining CuCl with[C4Vim] [NTF2] was much lower than with[C4Mim] [Cl]. For the CuCl-[C4Mim] [Cl]-acetonitrile, the extraction efficiency was better than CuCl-acetonitrile, increasing Cu+ concentration effectively improved the separation selectivity when ratio of CuCl/[C4Mim] [Cl] was less than 1. Compared with previous aqueous AgNO3 extractions, the method of using CuCl is a much cheaper and practical way to enrich unsaturated fatty acid.

关键词: Methyl linolenate, Cuprous salt, Ionic liquid, Cosolvent, Extraction

Abstract: Methyl linolenate was separated from its analogues by a new extraction system constructed by solvent, imidazolium based ionic liquids and cuprous salt. Firstly, the effect of ionic liquid on the dissolution of CuCl in acetonitrile, N,N-dimethylformamide (DMF), methanol and water was evaluated by visual observation.[C4Mim] [Cl] can improve the dissolution of CuCl in acetonitrile. Then, for the new system as acetonitrile-ILs-CuCl, extraction equilibrium, distribution ratio and selectivity of methyl linolenate and its analogues were determined by gas chromatography analysis and the mass balance. The extraction time, IL structures and CuCl concentrations were investigated. Distribution ratio decreased slightly, but selectivity increased significantly with the addition of CuCl,[C4Mim] [Cl] or[C4Vim] [NTF2] into acetonitrile.[C4Vim] [NTF2] had higher selectivity than[C4Mim] [Cl]. But the selectivity of the system combining CuCl with[C4Vim] [NTF2] was much lower than with[C4Mim] [Cl]. For the CuCl-[C4Mim] [Cl]-acetonitrile, the extraction efficiency was better than CuCl-acetonitrile, increasing Cu+ concentration effectively improved the separation selectivity when ratio of CuCl/[C4Mim] [Cl] was less than 1. Compared with previous aqueous AgNO3 extractions, the method of using CuCl is a much cheaper and practical way to enrich unsaturated fatty acid.

Key words: Methyl linolenate, Cuprous salt, Ionic liquid, Cosolvent, Extraction