Study on an improved rotating microchannel separator in the intensification for demulsification and separation process

doi:10.1016/j.cjche.2022.05.002

中国化学工程学报 ›› 2023, Vol. 55 ›› Issue (3): 181-191.DOI: 10.1016/j.cjche.2022.05.002

• Full Length Article • 上一篇下一篇

Study on an improved rotating microchannel separator in the intensification for demulsification and separation process

Chunxin Fan¹, Zini Guo², Jianhong Luo²

1. Nuclear Power Institute of China, Chengdu 610213, China;
2. Department of Chemical Engineering, Sichuan University, Chengdu 610065, China

收稿日期:2022-02-23 修回日期:2022-05-10 出版日期:2023-03-28 发布日期:2023-06-03
通讯作者: Jianhong Luo,E-mail:luojianhong@scu.edu.cn

Study on an improved rotating microchannel separator in the intensification for demulsification and separation process

Chunxin Fan¹, Zini Guo², Jianhong Luo²

1. Nuclear Power Institute of China, Chengdu 610213, China;
2. Department of Chemical Engineering, Sichuan University, Chengdu 610065, China

Received:2022-02-23 Revised:2022-05-10 Online:2023-03-28 Published:2023-06-03
Contact: Jianhong Luo,E-mail:luojianhong@scu.edu.cn

摘要/Abstract

摘要： An improved rotating microchannel (IRM) separator was further explored in the intensification for demulsification and separation process. Oil-in-water (O/W) emulsion system of 2-ethylhexyl phosphoric acid-2-ethylhexyl ester (P507)–water without emulsifier was employed toevaluate the performance of the new equipment. In this experiment, the influence on demulsification separation process was explored by changing the geometrical structure and channel height of the microchannel and combining the liquid–liquid two-phase flow pattern, and the correlation general graph between demulsification efficiency and dimensionless parameters was established. The total demulsification effect of the IRM and the separation capacity of the clear organic phase recovered from demulsification are significantly improved. In addition, the liquid–liquid two-phase flow pattern of the clear organic phase after demulsification and the remaining emulsion in the IRM are observed and recorded by high-speed photography. The separation ability of organic phase from the upper outlet can be significantly improved when the total demulsification rate of IRM is up to 90%. There are 3 types and 6 kinds of flow patterns observed. The results demonstrated that the suitable demulsification performance is obtained when the liquid–liquid two-phase inside the IRM is in a parallel pattern. Finally, the relation map between total demulsification efficiency and the universal flow is drawn, which provides a basis for the accurate control of the IRM device.

关键词: Improved rotating microchannel (IRM), Enhanced demulsification and separation process, Liquid–liquid two-phase flow pattern

Abstract: An improved rotating microchannel (IRM) separator was further explored in the intensification for demulsification and separation process. Oil-in-water (O/W) emulsion system of 2-ethylhexyl phosphoric acid-2-ethylhexyl ester (P507)–water without emulsifier was employed toevaluate the performance of the new equipment. In this experiment, the influence on demulsification separation process was explored by changing the geometrical structure and channel height of the microchannel and combining the liquid–liquid two-phase flow pattern, and the correlation general graph between demulsification efficiency and dimensionless parameters was established. The total demulsification effect of the IRM and the separation capacity of the clear organic phase recovered from demulsification are significantly improved. In addition, the liquid–liquid two-phase flow pattern of the clear organic phase after demulsification and the remaining emulsion in the IRM are observed and recorded by high-speed photography. The separation ability of organic phase from the upper outlet can be significantly improved when the total demulsification rate of IRM is up to 90%. There are 3 types and 6 kinds of flow patterns observed. The results demonstrated that the suitable demulsification performance is obtained when the liquid–liquid two-phase inside the IRM is in a parallel pattern. Finally, the relation map between total demulsification efficiency and the universal flow is drawn, which provides a basis for the accurate control of the IRM device.

Key words: Improved rotating microchannel (IRM), Enhanced demulsification and separation process, Liquid–liquid two-phase flow pattern

Chunxin Fan, Zini Guo, Jianhong Luo. Study on an improved rotating microchannel separator in the intensification for demulsification and separation process[J]. 中国化学工程学报, 2023, 55(3): 181-191.

Chunxin Fan, Zini Guo, Jianhong Luo. Study on an improved rotating microchannel separator in the intensification for demulsification and separation process[J]. Chinese Journal of Chemical Engineering, 2023, 55(3): 181-191.

参考文献

[1] D.S. Ma, H. Yi, C. Lai, X.G. Liu, X.Q. Huo, Z.W. An, L. Li, Y.K. Fu, B.S. Li, M.M. Zhang, L. Qin, S.Y. Liu, L. Yang, Critical review of advanced oxidation processes in organic wastewater treatment, Chemosphere 275 (2021) 130104.
[2] J.J. Rueda-Marquez, I. Levchuk, P. Fernández Ibañez, M. Sillanpää, A critical review on application of photocatalysis for toxicity reduction of real wastewaters, J. Clean. Prod. 258 (2020) 120694.
[3] Y.Q. Yang, J.X. Guo, Z.F. Cheng, W.M. Wu, J.J. Zhang, J.W. Zhang, Z.G. Yang, D.S. Zhang, New composite viscosity reducer with both asphaltene dispersion and emulsifying capability for heavy and ultraheavy crude oils, Energy Fuels 31 (2) (2017) 1159–1173.
[4] P. Kundu, V. Paul, V. Kumar, I.M. Mishra, Formulation development, modeling and optimization of emulsification process using evolving RSM coupled hybrid ANN-GA framework, Chem. Eng. Res. Des. 104 (2015) 773–790.
[5] K. Wang, G.S. Luo, Microflow extraction: A review of recent development, Chem. Eng. Sci. 169 (2017) 18–33.
[6] P.L. Mills, D.J. Quiram, J.F. Ryley, Microreactor technology and process miniaturization for catalytic reactions—A perspective on recent developments and emerging technologies, Chem. Eng. Sci. 62 (24) (2007) 6992–7010.
[7] J. Tan, J.H. Xu, S.W. Li, G.S. Luo, Drop dispenser in a cross-junction microfluidic device: Scaling and mechanism of break-up, Chem. Eng. J. 136 (2–3) (2008) 306–311.
[8] G.F. Christopher, S.L. Anna, Microfluidic methods for generating continuous droplet streams, J. Phys. D: Appl. Phys. 40 (19) (2007) R319–R336.
[9] F.Y. Ushikubo, F.S. Birribilli, D.R.B. Oliveira, R.L. Cunha, Y- and T-junction microfluidic devices: Effect of fluids and interface properties and operating conditions, Microfluid. Nanofluidics 17 (4) (2014) 711–720.
[10] T. Roques-Carmes, H. Monnier, J.F. Portha, P. Marchal, L. Falk, Influence of the plate-type continuous micro-separator dimensions on the efficiency of demulsification of oil-in-water emulsion, Chem. Eng. Res. Des. 92 (11) (2014) 2758–2769.
[11] Z.D. Ma, Y.D. Pu, D. Hamiti, M.X. Wei, X. Chen, Elaboration of the demulsification process of W/O emulsion with three-dimensional electric spiral plate-type microchannel, Micromachines 10 (11) (2019) 751.
[12] E. Kolehmainen, I. Turunen, Micro-scale liquid–liquid separation in a plate-type coalescer, Chem. Eng. Process. Process. Intensif. 46 (9) (2007) 834–839.
[13] D. Ciceri, J.M. Perera, G.W. Stevens, The use of microfluidic devices in solvent extraction, J. Chem. Technol. Biotechnol. 89 (6) (2014) 771–786.
[14] C.X. Fan, R. Ma, Y.B. Wang, J.H. Luo, Demulsification of oil-in-water emulsions in a novel rotating microchannel, Ind. Eng. Chem. Res. 59 (17) (2020) 8335–8345.
[15] H. Wang, B.X. Quan, X.Q. An, Y. Yang, C. Tian, Advanced decomposition of coking wastewater in relation to total organic carbon using an electrochemical system, Pol. J. Environ. Stud. 26 (2) (2017) 941–947.
[16] B. Chakrabarty, A.K. Ghoshal, M.K. Purkait, Cross-flow ultrafiltration of stable oil-in-water emulsion using polysulfone membranes, Chem. Eng. J. 165 (2) (2010) 447–456.
[17] M. Hlavacek, Break-up of oil-in-water emulsions induced by permeation through a microfiltration membrane, J. Membr. Sci. 102 (1995) 1–7.
[18] S. Kasemset, A. Lee, D.J. Miller, B.D. Freeman, M.M. Sharma, Effect of polydopamine deposition conditions on fouling resistance, physical properties, and permeation properties of reverse osmosis membranes in oil/water separation, J. Membr. Sci. 425-426 (2013) 208–216.
[19] G.L. Mo, H. Liu, S. Dai, Y.B. Wang, J. Li, J.H. Luo, Extraction of Fe³⁺ from NaH₂PO₄ solution in a spiral microchannel device, Chem. Eng. Process. Process. Intensif. 144 (2019) 107654.
[20] F. Kubota, M. Goto, F. Nakashio, Extraction of rare earth metals with 2-ethylhexyl phosphonic acid mono-2-ethylhexyl ester in the presence of diethylenetriaminepentaacetic acid in aqueous phase, Solvent Extr. Ion Exch. 11 (3) (1993) 437–453.
[21] Z. Chen, W.T. Wang, F.N. Sang, J.H. Xu, G.S. Luo, Y.D. Wang, Fast extraction and enrichment of rare earth elements from waste water via microfluidic-based hollow droplet, Sep. Purif. Technol. 174 (2017) 352–361.
[22] M.A. Rother, R.H. Davis, Simplified model for droplet growth in shear flow, AIChE J. 49 (2) (2003) 546–548.
[23] B.E. Priore, L.M. Walker, Coalescence analysis through small-angle light scattering, AIChE J. 47 (12) (2001) 2644–2652.
[24] S.P. Lyu, F.S. Bates, C.W. Macosko, Coalescence in polymer blends during shearing, AIChE J. 46 (2) (2000) 229–238.
[25] Y.C. Zhao, G.W. Chen, Q. Yuan, Liquid–liquid two-phase flow patterns in a rectangular microchannel, AIChE J. 52 (12) (2006) 4052–4060.
[26] F.N. Sang, Z. Chen, Y.D. Wang, J.H. Xu, Dynamic formation and scaling law of hollow droplet with gas/oil/water system in dual-coaxial microfluidic devices, AIChE J. 64 (2) (2018) 730–739.
[27] F. Scheiff, M. Mendorf, D. Agar, N. Reis, M. Mackley, The separation of immiscible liquid slugs within plastic microchannels using a metallic hydrophilic sidestream, Lab Chip 11 (6) (2011) 1022–1029.
[28] C. Chao, G.W. Xu, X.F. Fan, Effect of surface tension, viscosity, pore geometry and pore contact angle on effective pore throat, Chem. Eng. Sci. 197 (2019) 269–279.
[29] A.L. Dessimoz, L. Cavin, A. Renken, L. Kiwi-Minsker, Liquid–liquid two-phase flow patterns and mass transfer characteristics in rectangular glass microreactors, Chem. Eng. Sci. 63 (16) (2008) 4035–4044.
[30] M. N Kashid, A. Renken, L. Kiwi-Minsker, Influence of flow regime on mass transfer in different types of microchannels, Ind. Eng. Chem. Res. 50 (11) (2011) 6906–6914.
[31] E. Buckingham, On physically similar systems; Illustrations of the use of dimensional equations, Phys. Rev. 4 (4) (1914) 345–376.
[32] S.K.R. Cherlo, S. Kariveti, S. Pushpavanam, Experimental and numerical investigations of two-phase (liquid–liquid) flow behavior in rectangular microchannels, Ind. Eng. Chem. Res. 49 (2) (2010) 893–899.
[33] A.V. Minakov, A.A. Shebeleva, A.A. Yagodnitsyna, A.V. Kovalev, A.V. Bilsky, Flow regimes of viscous immiscible liquids in T-type microchannels, Chem. Eng. Technol. 42 (5) (2019) 1037–1044.
[34] M. Darekar, K.K. Singh, S. Mukhopadhyay, K.T. Shenoy, Liquid–liquid two-phase flow patterns in Y-junction microchannels, Ind. Eng. Chem. Res. 56 (42) (2017) 12215–12226.

Study on an improved rotating microchannel separator in the intensification for demulsification and separation process

Study on an improved rotating microchannel separator in the intensification for demulsification and separation process

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价