A master–slave generalized predictive synchronization control for preheating process of multi-cavity hot runner system

doi:10.1016/j.cjche.2023.03.024

中国化学工程学报 ›› 2023, Vol. 62 ›› Issue (10): 270-280.DOI: 10.1016/j.cjche.2023.03.024

• Full Length Article • 上一篇下一篇

A master–slave generalized predictive synchronization control for preheating process of multi-cavity hot runner system

Hongyi Qu¹, Shengyong Mo², Ke Yao², Zhao-Xia Huang⁴, Zhihao Xu¹, Furong Gao^2,3

1. Institute of Intelligent Manufacturing, Guangdong Academy of Sciences, Guangdong Key Laboratory of Modern Control Technology, Guangzhou 510070, China;
2. Fok Ying Tung Graduate School, The Hong Kong University of Science and Technology, Guangzhou 511442, China;
3. Department of Chemical and Biological Engineering, The Hong Kong University of Science and Technology, Hong Kong 999077, China;
4. National Engineering Research Center of Novel Equipment for Polymer Processing, Department of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou 510641, China

收稿日期:2022-08-23 修回日期:2023-03-24 出版日期:2023-10-28 发布日期:2023-12-23
通讯作者: Hongyi Qu,E-mail:hy.qu@giim.ac.cn
基金资助:
This project is supported in part by National Natural Science Foundation of China (62203127), Basic and Applied Basic Research Project of Guangzhou City (2023A04J1712), The Foshan-HKUST Projects Program (FSUST19-FYTRI01) and GDAS’ Project of Science and Technology Development (2020GDASYL-20200202001).

A master–slave generalized predictive synchronization control for preheating process of multi-cavity hot runner system

Hongyi Qu¹, Shengyong Mo², Ke Yao², Zhao-Xia Huang⁴, Zhihao Xu¹, Furong Gao^2,3

1. Institute of Intelligent Manufacturing, Guangdong Academy of Sciences, Guangdong Key Laboratory of Modern Control Technology, Guangzhou 510070, China;
2. Fok Ying Tung Graduate School, The Hong Kong University of Science and Technology, Guangzhou 511442, China;
3. Department of Chemical and Biological Engineering, The Hong Kong University of Science and Technology, Hong Kong 999077, China;
4. National Engineering Research Center of Novel Equipment for Polymer Processing, Department of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou 510641, China

Received:2022-08-23 Revised:2023-03-24 Online:2023-10-28 Published:2023-12-23
Contact: Hongyi Qu,E-mail:hy.qu@giim.ac.cn
Supported by:
This project is supported in part by National Natural Science Foundation of China (62203127), Basic and Applied Basic Research Project of Guangzhou City (2023A04J1712), The Foshan-HKUST Projects Program (FSUST19-FYTRI01) and GDAS’ Project of Science and Technology Development (2020GDASYL-20200202001).

摘要/Abstract

摘要： As a key component of injection molding, multi-cavity hot runner (MCHR) system faces the crucial problem of polymer melt filling imbalance among the cavities. The thermal imbalance in the system has been considered as the leading cause. Hence, the solution may rest with the synchronization of those heating processes in MCHR system. This paper proposes a ‘Master-Slave’ generalized predictive synchronization control (MS-GPSC) method with ‘Mr. Slowest’ strategy for preheating stage of MCHR system. The core of the proposed method is choosing the heating process with slowest dynamics as the ‘Master’ to track the setpoint, while the other heating processes are treated as ‘Slaves’ tracking the output of ‘Master’. This proposed method is shown to have the good ability of temperature synchronization. The corresponding analysis is conducted on parameters tuning and stability, simulations and experiments show the strategy is effective.

关键词: Process control, Thermodynamics process, Model-predictive control, Multi-cavity hot runner system, Master-Slave synchronization, Mr. Slowest

Abstract: As a key component of injection molding, multi-cavity hot runner (MCHR) system faces the crucial problem of polymer melt filling imbalance among the cavities. The thermal imbalance in the system has been considered as the leading cause. Hence, the solution may rest with the synchronization of those heating processes in MCHR system. This paper proposes a ‘Master-Slave’ generalized predictive synchronization control (MS-GPSC) method with ‘Mr. Slowest’ strategy for preheating stage of MCHR system. The core of the proposed method is choosing the heating process with slowest dynamics as the ‘Master’ to track the setpoint, while the other heating processes are treated as ‘Slaves’ tracking the output of ‘Master’. This proposed method is shown to have the good ability of temperature synchronization. The corresponding analysis is conducted on parameters tuning and stability, simulations and experiments show the strategy is effective.

Key words: Process control, Thermodynamics process, Model-predictive control, Multi-cavity hot runner system, Master-Slave synchronization, Mr. Slowest

Hongyi Qu, Shengyong Mo, Ke Yao, Zhao-Xia Huang, Zhihao Xu, Furong Gao. A master–slave generalized predictive synchronization control for preheating process of multi-cavity hot runner system[J]. 中国化学工程学报, 2023, 62(10): 270-280.

参考文献

[1] J. Chen, C.Y. Shen, H. Yokoi, A study on influence of resin temperature on filling balance of multi-cavity molds, Adv. Mater. Res. 87-88 (2009) 550–554.
[2] L. Reifschneider, Documenting and simulating flow segregation in geometrically balanced runners, J. Inject. Molding Technol. 5 (2001) 208–223.
[3] J. Beaumont, J.H. Young, M. Jaworski, Mold filling imbalances in geometrically balanced runner systems, J. Reinf. Plast. Compos. 18 (1999) 572–590.
[4] J. Beaumont, Runner and Gating Design Handbook: Tools for Successful Injection Molding, Hanser Publishers, Munich, Germany,2004.
[5] K. Wilczyński, P. Narowski, Experimental and theoretical study on filling imbalance in geometrically balanced injection molds, Polym. Eng. Sci. 59 (2) (2019) 233–245.
[6] K. Wilczyński, P. Narowski, A strategy for problem solving of filling imbalance in geometrically balanced injection molds, Polymers 12 (4) (2020) 805.
[7] M. I. Stein, On hot-runner temperature control, Modern Plastics, 61(1)(1984) 8.
[8] Y.F. Lv, Mathematical model and simulation analysis of hot runner temperature field, in: 3rd International Conference on Manufacturing Science and Engineering (ICMSE 2012), Sanya, China, 2012.
[9] Q. C. Hu, L. M. Wang, M. Z. Tang, Y. S. Wang, “Thermal analysis of a hot runner system in injection mold, Advanced Materials Research, 346(2012)564-571.
[10] R.J. Chen, B.X. Hua, H.W. Liu, B.M. Gong, Finite element analysis of temperature field for valve gated hot runner plate with a large group of cavity, Machiery Design & Manufacture, 42(6) (2013) 90–93.
[11] X. Jiang, D. Wang, Z. Yan, A. Guan, Analysis of hot runner temperature control system, China Plastics Industry, 39(6)(2011)27-31.
[12] M.X. Cheng, The design on hot runner control system based on single-chip, Modern Manufacturing Engineering, (12)(2009)136-140.
[13] C. Jiang, H. Jin, Q. Niu, Z. Shen, M. Li, “Design of temperature controller based on the microprocessor for hot runner mould, Journal of Guilin Institute of Technology, 24(2)(2004) 235-240.
[14] H. Liang, Z.K. Sang, Y.Z. Wu, Y.H. Zhang, R. Zhao, High precision temperature control performance of a PID neural network-controlled heater under complex outdoor conditions, Appl. Therm. Eng. 195 (2021) 117234.
[15] S. Wakitani, T. Yamamoto, B. Gopaluni, Design and application of a database-driven PID controller with data-driven updating algorithm, Ind. Eng. Chem. Res. 58 (26) (2019) 11419–11429.
[16] C. Jiang, H. Qian, Y.K. Pan, T.T. Chai, The research of superheated steam temperature control based on generalized predictive control algorithm and adaptive forgetting factor, Int. J. Adapt. Control Signal Process. 34 (1) (2020) 15–31.
[17] Z. Zhen, G. Yan, Design of the fuzzy PID controller for the hot runner temperature control system, in: Proceedings of the 32nd Chinese Control Conference, Xi'an, China. IEEE, 2013, 3464 – 3469 .
[18] F. Zhou, Y. Yang, F. Gao, GPC control of hot-runner temperature in injection molding, in: Annual technical conference of the Society of Plastics Engineers, Boston, MA(US), 2011.
[19] D.W. Clarke, C. Mohtadi, P.S.Tuffs, Generalized predictive control—part I. The basic algorithm, Automatica 23 (2) (1987) 137–148.
[20] D.W. Clarke, C. Mohtadi, P.S. Tuffs, Generalized predictive control—part II. Extensions and interpretations, Autom. J. IFAC 23 (2) (1987) 149–160.
[21] E.F. Camacho, C.Bordons, Introduction to model predictive control. Model Predictive control. London: Springer London, 2007: 1–11.
[22] Q.N. Tran, L. Özkan, A.C.P.M.Backx, Generalized predictive control tuning by controller matching, J. Process. Control 25 (2015) 1–18.
[23] M. Alhajeri, M. Soroush, Tuning guidelines for model-predictive control, Industrial & Engineering Chemistry Research, 59(10)(2020)4177-4191.
[24] B. Peyman, Pole-zero assignment in model predictive control, using analytical tuning approach, Optim. Control Appl. Methods 42 (5) (2021) 1253–1268.

A master–slave generalized predictive synchronization control for preheating process of multi-cavity hot runner system

A master–slave generalized predictive synchronization control for preheating process of multi-cavity hot runner system

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	Xiongzhuo Zhu, Dali Gao, Chong Yang, Chunjie Yang. A blast furnace fault monitoring algorithm with low false alarm rate: Ensemble of greedy dynamic principal component analysis-Gaussian mixture model[J]. 中国化学工程学报, 2023, 57(5): 151-161.
[2]	Supeng Yu, Ting Xiang, Njud S. Alharbi, Bothaina A. Al-aidaroos, Changlun Chen. Recent development of catalytic strategies for sustainable ammonia production[J]. 中国化学工程学报, 2023, 62(10): 65-113.
[3]	Jia Ren, Zengqiang Chen, Mingwei Sun, Qinglin Sun, Zenghui Wang. Proportion integral-type active disturbance rejection generalized predictive control for distillation process based on grey wolf optimization parameter tuning[J]. 中国化学工程学报, 2022, 49(9): 234-244.
[4]	Xiang Wu, Yuzhou Hou, Kanjian Zhang, Ming Cheng. Dynamic optimization of 1,3-propanediol fermentation process: A switched dynamical system approach[J]. 中国化学工程学报, 2022, 44(4): 192-204.
[5]	Gabriel Khew Mun Hong, Mohd Azlan Hussain, Ahmad Khairi Abdul Wahab. Fuzzy logic controller implementation on a microbial electrolysis cell for biohydrogen production and storage[J]. 中国化学工程学报, 2021, 40(12): 149-159.
[6]	Yang Yuan, Kejin Huang, Xing Qian, Haisheng Chen, Lijing Zang, Liang Zhang. Enhanced temperature difference control of distillation columns based on the averaged absolute variation magnitude[J]. 中国化学工程学报, 2021, 29(1): 266-278.
[7]	Feng Pan, Zhan Du, Shaofu Li, Jun Li, Meiju Zhang, Maoqiao Xiang, Qingshan Zhu. Preparation of nano-sized tungsten carbide via fluidized bed[J]. 中国化学工程学报, 2020, 28(3): 923-932.
[8]	Shutian Chen, Qingchao Jiang, Xuefeng Yan. Multimodal process monitoring based on transition-constrained Gaussian mixture model[J]. 中国化学工程学报, 2020, 28(12): 3070-3078.
[9]	Minyan Zhu, Yafei Hou, Na Yu, Mengqi Chen, Zhanhua Ma, Lanyi Sun. Design and control of a middle-vessel batch distillation for separating DMC-EMC-DEC mixture[J]. Chinese Journal of Chemical Engineering, 2018, 26(9): 1837-1844.
[10]	Shengkun Jia, Xing Qian, Xigang Yuan, Sigurd Skogestad. Control structure comparison for three-product Petlyuk column[J]. Chinese Journal of Chemical Engineering, 2018, 26(8): 1621-1630.
[11]	Xiaolong Ge, Botong Liu, Xigang Yuan, Yiqing Luo, Kuo-Ksong Yu. Application of the dividing wall column to olefin separation in fluidization methanol to propylene (FMTP) process[J]. , 2017, 25(8): 1069-1078.
[12]	Mahmoud M. Saafan, Mohamed M. Abdelsalam, Mohamed S. Elksas, Sabry F. Saraya, Fayez F. G. Areed. An adaptive neuro-fuzzy sliding mode controller for MIMO systems with disturbance[J]. , 2017, 25(4): 463-476.
[13]	Liangliang Sun, Jianghua Wu, Haiqi Jia, Xuebin Liu. Research on fault detection method for heat pump air conditioning system under cold weather[J]. Chinese Journal of Chemical Engineering, 2017, 25(12): 1812-1819.
[14]	Kejin Huang, Yang Yuan, Liang Zhang, Haisheng Chen, Shaofeng Wang, Nian Liu. Unique influences of reboiler inventory control on the operation of totally reboiled reactive distillation columns[J]. , 2017, 25(1): 103-115.
[15]	Yang Yuan, Liang Zhang, Haisheng Chen, Shaofeng Wang, Kejin Huang, Huan Shao. Interpreting the dynamic effect of internal heat integration on reactive distillation columns[J]. , 2017, 25(1): 89-102.