SCI和EI收录∣中国化工学会会刊

Chinese Journal of Chemical Engineering ›› 2012, Vol. 20 ›› Issue (5): 889-894.

• • 上一篇    下一篇

AmmAmmoximation of Cyclohexanone to Cyclohexanone Oxime Catalyzed by Titanium Silicalite-1 Zeolite in Three-phase System*

刘国清1,2, 吴剑2, 罗和安2   

  1. 1. School of Chemistry and Chemical Engineering, Hunan University of Science and Technology, Xiangtan 411201, China;
    2. School of Chemical Engineering, Xiangtan University, Xiangtan 411105, China
  • 收稿日期:2011-06-09 修回日期:2011-12-15 出版日期:2012-10-28 发布日期:2012-11-06
  • 通讯作者: LUO He'an,E-mail:hluo@xtu.edu.cn
  • 基金资助:
    Supported by the National Natural Science Foundation of China and Sinopec (20736009)

AmmAmmoximation of Cyclohexanone to Cyclohexanone Oxime Catalyzed by Titanium Silicalite-1 Zeolite in Three-phase System*

LIU Guoqing1,2, WU Jian2, LUO He'an2   

  1. 1. School of Chemistry and Chemical Engineering, Hunan University of Science and Technology, Xiangtan 411201, China;
    2. School of Chemical Engineering, Xiangtan University, Xiangtan 411105, China
  • Received:2011-06-09 Revised:2011-12-15 Online:2012-10-28 Published:2012-11-06
  • Supported by:
    Supported by the National Natural Science Foundation of China and Sinopec (20736009)

摘要: An innovative green process of producing ε-caprolactam was proposed by integrating ammoximation and Beckmann rearrangement effectively. As a first part of the new process, TS-1 molecular sieve-catalyzed synthesis of cyclohexanone oxime from cyclohexanone, ammonia and hydrogen peroxide was carried out in a batch plant. Cyclohexane was used as the solvent in the three-phase reaction system. The influences of essential process parameters on ammoximation were investigated. Under the reaction conditions as catalyst content of 2.5% (by mass); H2O2/yclohexanone molar ratio of 1.10; NH3/cyclohexanone molar ratio of 2.20; reaction temperature of 343 K; reaction time of 5 h, high conversion of cyclohexanone and selectivity to oxime (both>99%) were obtained. Thus, the three-phase ammoximation process showed equal catalytic activity as TS-1 but much more convenient and simpler for the separation of catalyst in comparison to the industrial two-phase system with t-butanol used as solvent.

关键词: ammoximation, molecular sieve TS-1, cyclohexanone oxime, cyclohexane, three-phase system

Abstract: An innovative green process of producing ε-caprolactam was proposed by integrating ammoximation and Beckmann rearrangement effectively. As a first part of the new process, TS-1 molecular sieve-catalyzed synthesis of cyclohexanone oxime from cyclohexanone, ammonia and hydrogen peroxide was carried out in a batch plant. Cyclohexane was used as the solvent in the three-phase reaction system. The influences of essential process parameters on ammoximation were investigated. Under the reaction conditions as catalyst content of 2.5% (by mass); H2O2/yclohexanone molar ratio of 1.10; NH3/cyclohexanone molar ratio of 2.20; reaction temperature of 343 K; reaction time of 5 h, high conversion of cyclohexanone and selectivity to oxime (both>99%) were obtained. Thus, the three-phase ammoximation process showed equal catalytic activity as TS-1 but much more convenient and simpler for the separation of catalyst in comparison to the industrial two-phase system with t-butanol used as solvent.

Key words: ammoximation, molecular sieve TS-1, cyclohexanone oxime, cyclohexane, three-phase system