SCI和EI收录∣中国化工学会会刊

Chinese Journal of Chemical Engineering ›› 2018, Vol. 26 ›› Issue (5): 1213-1218.DOI: 10.1016/j.cjche.2017.12.015

• Materials and Product Engineering • 上一篇    下一篇

Thermal conductivity of PVDF/PANI-nanofiber composite membrane aligned in an electric field

Hong Guo1,2,3,4, Xin Li1,2,3,4, Ziyi Wang1,2,3,4, Bao'an Li1,2,3,4, Jixiao Wang1,2,3,4, Shichang Wang1,3   

  1. 1 Chemical Engineering Research Center, School of Chemical Engineering and Technology, Tianjin University, Tianjin 300072, China;
    2 State Key Laboratory of Chemical Engineering, Tianjin University, Tianjin 300072, China;
    3 Tianjin Key Laboratory of Membrane Science and Desalination Technology, Tianjin University, Tianjin 300072, China;
    4 Tianjin Collaborative Innovation Center for Chemistry & Chemical Engineering, Tianjin 300072, China
  • 收稿日期:2017-09-15 修回日期:2017-12-25 出版日期:2018-05-28 发布日期:2018-06-29
  • 通讯作者: Bao'an Li,E-mail address:libaoan@tju.edu.cn
  • 基金资助:

    Supported by the Science and Technology Project of Tianjin (Grant No. 12ZCZDSF02200) and the Innovation Service Platform Project of Desalination and Comprehensive Utilization (Grant No. CXSF2014-34-C).

Thermal conductivity of PVDF/PANI-nanofiber composite membrane aligned in an electric field

Hong Guo1,2,3,4, Xin Li1,2,3,4, Ziyi Wang1,2,3,4, Bao'an Li1,2,3,4, Jixiao Wang1,2,3,4, Shichang Wang1,3   

  1. 1 Chemical Engineering Research Center, School of Chemical Engineering and Technology, Tianjin University, Tianjin 300072, China;
    2 State Key Laboratory of Chemical Engineering, Tianjin University, Tianjin 300072, China;
    3 Tianjin Key Laboratory of Membrane Science and Desalination Technology, Tianjin University, Tianjin 300072, China;
    4 Tianjin Collaborative Innovation Center for Chemistry & Chemical Engineering, Tianjin 300072, China
  • Received:2017-09-15 Revised:2017-12-25 Online:2018-05-28 Published:2018-06-29
  • Contact: Bao'an Li,E-mail address:libaoan@tju.edu.cn
  • Supported by:

    Supported by the Science and Technology Project of Tianjin (Grant No. 12ZCZDSF02200) and the Innovation Service Platform Project of Desalination and Comprehensive Utilization (Grant No. CXSF2014-34-C).

摘要: Poly(vinylidene fluoride) (PVDF) is a semi-crystalline thermoplastic polymer with excellent thermal stability, electrochemical stability and corrosion resistance, which has been widely studied and applied in industrial nonmetallic heat exchanger and piezoelectric-film sensor. In this study, polyaniline (PANI) nanofibers were synthesized using dodecylbenzene sulfonic acid as the surfactant. The obtained PANI nanofibers were blended in PVDF matrix to enhance thermal conductivity and tensile strength of composite materials. Electric field was applied for the orientation of membrane structure during membrane formation. Scanning electron microscope (SEM) images exhibited that the PANI nanofibers were well-dispersed in the composite membranes. The structure of composite membranes was more orderly after alignment. X-ray diffraction (XRD) and differential scanning calorimetry (DSC) indicated that the content of PANI nanofibers contributed to the transformation of PVDF from α-phase to β-phase. Both the tensile strength and thermal conductivity of composite membranes were significantly improved. This tendency was further enhanced by the application of electric field. The maximum tensile strength was obtained when the content of PANI nanofibers was 3 wt%, which was 46.44% higher than that of pure PVDF membrane. The maximum thermal conductivity of composite membranes after alignment was 84.5% greater than that of pure PVDF membrane when the content of PANI nanofibers was 50 wt%. The composite membrane is a promising new potential material in heat transfer field and the mechanism explored in this study would be informative for further development of similar thermal conductive polymeric materials.

关键词: Poly (vinylidene fluoride), Polyaniline nanofibers, Composite membrane, Thermal conductivity

Abstract: Poly(vinylidene fluoride) (PVDF) is a semi-crystalline thermoplastic polymer with excellent thermal stability, electrochemical stability and corrosion resistance, which has been widely studied and applied in industrial nonmetallic heat exchanger and piezoelectric-film sensor. In this study, polyaniline (PANI) nanofibers were synthesized using dodecylbenzene sulfonic acid as the surfactant. The obtained PANI nanofibers were blended in PVDF matrix to enhance thermal conductivity and tensile strength of composite materials. Electric field was applied for the orientation of membrane structure during membrane formation. Scanning electron microscope (SEM) images exhibited that the PANI nanofibers were well-dispersed in the composite membranes. The structure of composite membranes was more orderly after alignment. X-ray diffraction (XRD) and differential scanning calorimetry (DSC) indicated that the content of PANI nanofibers contributed to the transformation of PVDF from α-phase to β-phase. Both the tensile strength and thermal conductivity of composite membranes were significantly improved. This tendency was further enhanced by the application of electric field. The maximum tensile strength was obtained when the content of PANI nanofibers was 3 wt%, which was 46.44% higher than that of pure PVDF membrane. The maximum thermal conductivity of composite membranes after alignment was 84.5% greater than that of pure PVDF membrane when the content of PANI nanofibers was 50 wt%. The composite membrane is a promising new potential material in heat transfer field and the mechanism explored in this study would be informative for further development of similar thermal conductive polymeric materials.

Key words: Poly (vinylidene fluoride), Polyaniline nanofibers, Composite membrane, Thermal conductivity