Pore-level numerical simulation of methane-air combustion in a simplified two-layer porous burner

doi:10.1016/j.cjche.2020.09.061

中国化学工程学报 ›› 2021, Vol. 34 ›› Issue (6): 87-96.DOI: 10.1016/j.cjche.2020.09.061

• Catalysis, Kinetics and Reaction Engineering • 上一篇下一篇

Pore-level numerical simulation of methane-air combustion in a simplified two-layer porous burner

Yang Liu¹, Yangbo Deng^1,2, Junrui Shi³, Rujie Xiao², Houping Li³

1 Marine Engineering College, Dalian Maritime University, Dalian 116026, China;
2 Naval Architecture and Ocean Engineering College, Dalian Maritime University, Dalian 116026, China;
3 School of Transportation and Vehicle Engineering, Shandong University of Technology, Zibo 255049, China

收稿日期:2020-04-11 修回日期:2020-08-12 出版日期:2021-06-28 发布日期:2021-08-30
通讯作者: Yangbo Deng
基金资助:
The authors wish to acknowledge the support to this work by the National Natural Science Foundation of China (No. 51876107).

Pore-level numerical simulation of methane-air combustion in a simplified two-layer porous burner

Yang Liu¹, Yangbo Deng^1,2, Junrui Shi³, Rujie Xiao², Houping Li³

1 Marine Engineering College, Dalian Maritime University, Dalian 116026, China;
2 Naval Architecture and Ocean Engineering College, Dalian Maritime University, Dalian 116026, China;
3 School of Transportation and Vehicle Engineering, Shandong University of Technology, Zibo 255049, China

Received:2020-04-11 Revised:2020-08-12 Online:2021-06-28 Published:2021-08-30
Contact: Yangbo Deng
Supported by:
The authors wish to acknowledge the support to this work by the National Natural Science Foundation of China (No. 51876107).

摘要/Abstract

摘要： A simplified two-dimensional model of two-layer porous burner based on pore level is developed. The heat transfer of solid phase in porous burner is seen as the synergistic effects of conduction through connecting bridges and surface radiation between the solid particles in the model. A numerical simulation study on the characteristics of flow, combustion and heat transfer in the two-layer porous burner is carried out using the pore level model, and the effects of the control parameters such as the inlet velocity and solid thermal conductivity on thermal non-equilibrium are investigated. The results show that the flame structure is highly two-dimensional based on pore level. Obvious thermal non-equilibrium in the burner for the two phases and solid phase are observed, the largest temperature difference between the gas and solid phases is observed in combustion zone, while the temperature difference inside the solid particles is largest near the flame front. The results also reveal that thermal non-equilibrium of porous burner is much affected by the inlet velocity and solid thermal conductivity.

关键词: Numerical simulation, Porous media, Thermal non-equilibrium, Heat transfer, Thermal conductivity

Abstract: A simplified two-dimensional model of two-layer porous burner based on pore level is developed. The heat transfer of solid phase in porous burner is seen as the synergistic effects of conduction through connecting bridges and surface radiation between the solid particles in the model. A numerical simulation study on the characteristics of flow, combustion and heat transfer in the two-layer porous burner is carried out using the pore level model, and the effects of the control parameters such as the inlet velocity and solid thermal conductivity on thermal non-equilibrium are investigated. The results show that the flame structure is highly two-dimensional based on pore level. Obvious thermal non-equilibrium in the burner for the two phases and solid phase are observed, the largest temperature difference between the gas and solid phases is observed in combustion zone, while the temperature difference inside the solid particles is largest near the flame front. The results also reveal that thermal non-equilibrium of porous burner is much affected by the inlet velocity and solid thermal conductivity.

Key words: Numerical simulation, Porous media, Thermal non-equilibrium, Heat transfer, Thermal conductivity

Yang Liu, Yangbo Deng, Junrui Shi, Rujie Xiao, Houping Li. Pore-level numerical simulation of methane-air combustion in a simplified two-layer porous burner[J]. 中国化学工程学报, 2021, 34(6): 87-96.

Yang Liu, Yangbo Deng, Junrui Shi, Rujie Xiao, Houping Li. Pore-level numerical simulation of methane-air combustion in a simplified two-layer porous burner[J]. Chinese Journal of Chemical Engineering, 2021, 34(6): 87-96.

参考文献

[1] S.N. Hoda, S.A.G. Nassab, J.J. Ebrahim, Three dimensional numerical simulation of combustion and heat transfer in porous radiant burners, In. J. Therm. Sci. 145(2019) 106024.
[2] F. Mousazadeh, H.E.A. Akker, R.F. Mudde, Direct numerical simulation of an exothermic gas-phase reaction in a packed bed with random particle distribution, Chem. Eng. Sci. 100(2013) 259-265.
[3] S.M. Hashemi, S.A. Hashemi, Flame stability analysis of the premixed methaneair combustion in a two-layer porous media burner by numerical simulation, Fuel 202(2017) 56-65.
[4] H.B. Gao, Z.G. Qu, Y.L. He, W.Q. Tao, Experimental study of combustion in a double-layer burner packed with alumina pellets of different diameters, Appl. Energy 100(2012) 295-302.
[5] H.B. Gao, Z.G. Qu, W.Q. Tao, Y.L. He, J. Zhou, Experimental study of biogas combustion in a two-layer packed bed burner, Energy & Fuels 25(2011) 2887-2895.
[6] H.B. Gao, Z.G. Qu, X.B. Feng, W.Q. Tao, Methane/air premixed combustion in a two-layer porous burner with different foam materials, Fuel 115(2014) 154-161.
[7] V. Bubnovich, M. Toledo, L. Henríquez, C. Rosas, J. Romero, Flame stabilization between two beds of alumina balls in a porous burner, Appl. Therm. Eng. 30(2010) 92-95.
[8] C.H. Zheng, L.M. Cheng, A. Saveliev, Z.Y. Luo, K.F. Cen, Gas and solid phase temperatures measurements of porous media combustion, Proc. Combust. Inst. 33(2010) 3301-3308.
[9] A.W. Fan, L.H. Li, W. Yang, Z.L. Yuan, Comparison of combustion efficiency between micro combustors with single-and double-layered walls:a numerical study, Chem. Eng. Process. 137(2019) 39-47.
[10] Y. Liu, J. Zhang, A.W. Fan, J.L. Wan, H. Yao, W. Liu, Numerical investigation of CH₄/O₂ mixing in Y-shaped mesoscale combustors with/without porous media, Chem. Eng. Process. 79(2014) 7-13.
[11] J. Li, Q.Q. Li, J.R. Shi, X.L. Liu, Z.L. Guo, Numerical study on heat recirculation in a porous micro-combustor, Combust. Flame 171(2016) 152-161.
[12] H. Liu, S. Dong, B.W. Li, H.G. Chen, Parametric investigations of premixed methane-air combustion in two-section porous media by numerical simulation, Fuel 89(2010) 1736-1742.
[13] G.N. Li, H. Zhou, X.P. Qian, K.F. Cen, Determination of hydrogen production from Rich filtration combustion with detailed kinetics based CFD method, Chin. J. Chem. Eng. 16(2) (2008) 292-298.
[14] M.J.S. Lemos, J.E.A. Coutinho, Turbulent flow in porous combustor using the thermal non-equilibrium hypothesis and radiation boundary condition, Int. J. Heat Mass Transfer 115(2017) 1043-1054.
[15] X.P. Wen, T.F. Su, Z.G. Liu, M.Z. Xie, F.H. Wang, Z.C. Liu, Numerical investigation on porous media quenching behaviors of premixed deflagrating flame using RANS/LES model, J. Therm. Sci. 28(2019) 780-788.
[16] N. Djordjevic, P. Habisreuther, N. Zarzalis, A numerical investigation of the flame stability in porous burners employing various ceramic sponge-like structures, Chem. Eng. Sci. 66(2011) 682-688.
[17] H.Y. Zeng, Y.Q. Wang, Y.X. Shi, M. Ni, N.S. Cai, Syngas production from CO₂/CH₄ rich combustion in a porous media burner:experimental characterization and elementary reaction model, Fuel 199(2017) 413-419.
[18] L.S. Jiang, H.S. Liu, S.Y. Suo, M.Z. Xie, M.L. Bai, Simulation of propane-air premixed combustion process in randomly packed beds, Appl. Therm. Eng. 141(2018) 153-163.
[19] J.R. Shi, H.X. Xiao, J. Li, N. Li, Y.F. Xia, Y.N. Xu, Two-dimensional pore-level simulation of low-velocity filtration combustion in a packed bed with staggered arrangements of discrete, Combust. Sci. Techno. 189(2017) 1260-1276.
[20] Z.S. Chen, M.Z. Xie, H.S. Liu, M. Yue, Numerical investigation on the thermal non-equilibrium in low-velocity reacting flow within porous media, Int. J. Heat Mass Transfer 77(2014) 585-599.
[21] L. Lu, X.P. Du, C.Y. Xin, Modeling and simulation of local thermal nonequilibrium effects in porous media with small thermal conductivity, Transport Porous Med. 124(2018) 553-575.
[22] C.Y. Xin, L. Lu, B.B. Shi, Z.X. Liu, Numerical investigation of local thermal nonequilibrium effects in coal porous media with cryogenic nitrogen injection, Int. J. Therm. Sci. 133(2018) 32-40.
[23] I. Yakovlev, S. Zambalov, Three-dimensional pore-scale numerical simulation of methane-air combustion in inert porous media under the conditions of upstream and downstream combustion wave propagation through the media, Combust. Flame 209(2019) 74-98.
[24] A.G. Dixon, M. Nijemeisland, E.H. Stitt, Systematic mesh development for 3D CFD simulation of fixed beds:contact points study, Comput. Chem. Eng. 48(2013) 135-153.
[25] M. Sahraoui, M. Kaviany, Direct simulation vs volume-averaged treatment of adiabatic, premixed flame in a porous medium, Int. J. Heat Mass Transfer 37(1994) 2817-2834.
[26] F. Contarin, A.V. Saveliev, A.A. Fridman, L.A. Kennedy, A reciprocal flow filtration combustor with embedded heat exchangers:numerical study, Int. J. Heat Mass Transfer 46(2003) 949-961.
[27] M. Munro, Evaluated material properties for a sintered alpha-alumina, J. Am. Ceram. Soc. 80(2010) 1919-1928.

Pore-level numerical simulation of methane-air combustion in a simplified two-layer porous burner

Pore-level numerical simulation of methane-air combustion in a simplified two-layer porous burner

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	Xuejing He, Zhenlin Li, Ji Wang, Hai Yu. Effects of tube cross-sectional shapes on flow pattern, liquid film and heat transfer of n-pentane across tube bundles[J]. 中国化学工程学报, 2023, 60(8): 16-25.
[2]	Jiahao Xing, Huaizhi Han, Ruitian Yu, Wen Luo. Numerical simulation of flow and heat transfer of n-decane in sub-millimeter spiral tube at supercritical pressure[J]. 中国化学工程学报, 2023, 60(8): 173-185.
[3]	Jian Han, Xinhua Liu, Shanwei Hu, Nan Zhang, Jingjing Wang, Bin Liang. Optimization of decoupling combustion characteristics of coal briquettes and biomass pellets in household stoves[J]. 中国化学工程学报, 2023, 59(7): 182-192.
[4]	Shengfeng Luo, Song Zhang, Yiping Zeng, Hui Zhang, Lili Zheng, Zhaopeng Xu. Study on oxygen transport and titanium oxidation in coating cracks under parallel gas flow based on LBM modelling[J]. 中国化学工程学报, 2023, 56(4): 15-24.
[5]	Jikai Dong, Bing Wang, Xinjie Wang, Chenxi Cao, Shikuan Chen, Wenli Du. Optimization of sensor deployment sequences for hazardous gas leakage monitoring and source term estimation[J]. 中国化学工程学报, 2023, 56(4): 169-179.
[6]	Chengang Yang, Huaizhi Han, Quan Zhu, Xiangyuan Li. Cracking and buoyancy effect on hydrocarbon endothermic and heat transfer characteristics in rectangular mini-channel[J]. 中国化学工程学报, 2023, 56(4): 242-254.
[7]	Shuangfei Zhao, Yingying Nie, Wenyan Zhang, Runze Hu, Lianzhu Sheng, Wei He, Ning Zhu, Yuguang Li, Dong Ji, Kai Guo. Microfluidic field strategy for enhancement and scale up of liquid–liquid homogeneous chemical processes by optimization of 3D spiral baffle structure[J]. 中国化学工程学报, 2023, 56(4): 255-265.
[8]	Jianhui Zhou, Guohao Du, Jianfeng Hu, Xin Lai, Shan Liu, Zhengguo Zhang. The establishment of Boron nitride@sodium alginate foam/polyethyleneglycol composite phase change materials with high thermal conductivity, shape stability, and reusability[J]. 中国化学工程学报, 2023, 54(2): 11-21.
[9]	Xibao Zhang, Zhenghong Luo. Bubble size modeling approach for the simulation of bubble columns[J]. 中国化学工程学报, 2023, 53(1): 194-200.
[10]	Kang Wang, Wei Tan, Liyan Liu. “Relay-mode” promoting permeation of water-based fire extinguishing agent in granular materials porous media stacks[J]. 中国化学工程学报, 2022, 47(7): 98-112.
[11]	Kuo Lin, Zhongjie Shen, Qinfeng Liang, Jianliang Xu, Haifeng Liu. The study of the effect of gas-phase fluctuation on slag flow and refractory brick corrosion in the slag tapping hole of an entrained-flow gasifier[J]. 中国化学工程学报, 2022, 47(7): 271-281.
[12]	Pan Zhang, Guanghui Chen, Weiwen Wang, Guodong Zhang, Huaming Wang. Analysis of the nutation and precession of the vortex core and the influence of operating parameters in a cyclone separator[J]. 中国化学工程学报, 2022, 46(6): 1-10.
[13]	Feng Jiang, Di Xu, Ruijia Li, Guopeng Qi, Xiulun Li. Particle collision behavior and heat transfer performance in a Na₂SO₄ circulating fluidized bed evaporator[J]. 中国化学工程学报, 2022, 46(6): 40-52.
[14]	Ye Zhang, Yong Gao, Peng Wang, Duo Na, Zhenming Yang, Jinsong Zhang. Solvent extraction with a three-dimensional reticulated hollow-strut SiC foam microchannel reactor[J]. 中国化学工程学报, 2022, 46(6): 53-62.
[15]	Younki Cho, Ryan Lo, Keerthana Krishnan, Xiaolong Yin, Hossein Kazemi. Measuring absolute adsorption in porous rocks using oscillatory motions of a spring-mass system[J]. 中国化学工程学报, 2022, 44(4): 131-139.