Computational fluid dynamic simulation of gas-liquid flow in rotating packed bed: A review

doi:10.1016/j.cjche.2021.09.024

中国化学工程学报 ›› 2022, Vol. 41 ›› Issue (1): 85-108.DOI: 10.1016/j.cjche.2021.09.024

Computational fluid dynamic simulation of gas-liquid flow in rotating packed bed: A review

Wen-Cong Chen¹, Ya-Wei Fan¹, Liang-Liang Zhang¹, Bao-Chang Sun¹, Yong Luo¹, Hai-Kui Zou¹, Guang-Wen Chu^1,2, Jian-Feng Chen^1,2

1 Research Center of the Ministry of Education for High Gravity Engineering and Technology, Beijing University of Chemical Technology, Beijing 100029, China;
2 StateKey Laboratory of Organic-Inorganic Composites, Beijing University of Chemical Technology, Beijing 100029, China

收稿日期:2021-06-04 修回日期:2021-09-26 出版日期:2022-01-28 发布日期:2022-02-25
通讯作者: Liang-Liang Zhang,E-mail address:zhll@mail.buct.edu.cn;Guang-Wen Chu,E-mail address:chugw@mail.buct.edu.cn
基金资助:
This work was financially supported by the National Natural Science Foundation of China (21978011 and 21725601).

Computational fluid dynamic simulation of gas-liquid flow in rotating packed bed: A review

Wen-Cong Chen¹, Ya-Wei Fan¹, Liang-Liang Zhang¹, Bao-Chang Sun¹, Yong Luo¹, Hai-Kui Zou¹, Guang-Wen Chu^1,2, Jian-Feng Chen^1,2

1 Research Center of the Ministry of Education for High Gravity Engineering and Technology, Beijing University of Chemical Technology, Beijing 100029, China;
2 StateKey Laboratory of Organic-Inorganic Composites, Beijing University of Chemical Technology, Beijing 100029, China

Received:2021-06-04 Revised:2021-09-26 Online:2022-01-28 Published:2022-02-25
Contact: Liang-Liang Zhang,E-mail address:zhll@mail.buct.edu.cn;Guang-Wen Chu,E-mail address:chugw@mail.buct.edu.cn
Supported by:
This work was financially supported by the National Natural Science Foundation of China (21978011 and 21725601).

摘要/Abstract

摘要： The rotating packed bed (RPB) has been widely used in gas-liquid flow systems as a process intensification device, exhibiting excellent mass transfer enhancement characteristics. However, the complex internal structure and the high-speed rotation of the rotor in RPB bring significant challenges to study the intensification mechanism by experiment methods. In the past two decades, Computational fluid dynamics (CFD) has been gradually applied to simulate the hydrodynamics and mass transfer characteristics in RPB and instruct the reactor design. This article covers the development of the CFD simulation of gasliquid flow in RPB. Firstly, the improvement of the simulation method in the aspect of mathematical models, geometric models, and solving methods is introduced. Secondly, new progress of CFD simulation about hydrodynamic and mass transfer characteristics in RPB is reviewed, including pressure drop, velocity distribution, flow pattern, and concentration distribution, etc. Some new phenomena such as the end effect area with the maximum turbulent have been revealed by this works. In addition, the exploration of developing new reactor structures by CFD simulation is introduced and it is proved that such new structures are competitive to different applications. The defects of current research and future development directions are also discussed at last.

关键词: Rotating packed bed, Computational fluid dynamics, Simulation, Hydrodynamics, Mass transfer

Abstract: The rotating packed bed (RPB) has been widely used in gas-liquid flow systems as a process intensification device, exhibiting excellent mass transfer enhancement characteristics. However, the complex internal structure and the high-speed rotation of the rotor in RPB bring significant challenges to study the intensification mechanism by experiment methods. In the past two decades, Computational fluid dynamics (CFD) has been gradually applied to simulate the hydrodynamics and mass transfer characteristics in RPB and instruct the reactor design. This article covers the development of the CFD simulation of gasliquid flow in RPB. Firstly, the improvement of the simulation method in the aspect of mathematical models, geometric models, and solving methods is introduced. Secondly, new progress of CFD simulation about hydrodynamic and mass transfer characteristics in RPB is reviewed, including pressure drop, velocity distribution, flow pattern, and concentration distribution, etc. Some new phenomena such as the end effect area with the maximum turbulent have been revealed by this works. In addition, the exploration of developing new reactor structures by CFD simulation is introduced and it is proved that such new structures are competitive to different applications. The defects of current research and future development directions are also discussed at last.

Key words: Rotating packed bed, Computational fluid dynamics, Simulation, Hydrodynamics, Mass transfer

Wen-Cong Chen, Ya-Wei Fan, Liang-Liang Zhang, Bao-Chang Sun, Yong Luo, Hai-Kui Zou, Guang-Wen Chu, Jian-Feng Chen. Computational fluid dynamic simulation of gas-liquid flow in rotating packed bed: A review[J]. 中国化学工程学报, 2022, 41(1): 85-108.

参考文献

[1] C. Ramshaw, H.R. Mallinson, Mass transfer process, US Patent 05/963886(1981).
[2] D.P. Rao, A. Bhowal, P.S. Goswami, Process intensification in rotating packed beds (HIGEE):an appraisal, Ind. Eng. Chem. Res. 43(4)(2004)1150-1162.
[3] H. Zhao, L. Shao, J.F. Chen, High-gravity process intensification technology and application, Chem. Eng. J. 156(3)(2010)588-593.
[4] F. Visscher, J. van der Schaaf, T.A. Nijhuis, J.C. Schouten, Rotating reactors-A review, Chem. Eng. Res. Des. 91(10)(2013)1923-1940.
[5] S.Y. Wu, L.L. Zhang, B.C. Sun, H.K. Zou, X.F. Zeng, Y. Luo, Q. Li, J.F. Chen, Masstransfer performance for CO₂ absorption by 2-(2-aminoethylamino) ethanol solution in a rotating packed bed, Energy Fuels 31(12)(2017)14053-14059.
[6] S.B. Cao, P. Liu, L.L. Zhang, B.C. Sun, J.F. Chen, Mass transfer study of dehydration by triethylene glycol in rotating packed bed for natural gas processing, Ind. Eng. Chem. Res. 57(15)(2018)5394-5400.
[7] L.L. Zhang, J.X. Wang, Z.P. Liu, Y. Lu, G.W. Chu, W.C. Wang, J.F. Chen, Efficient capture of carbon dioxide with novel mass-transfer intensification device using ionic liquids, AIChE J. 59(8)(2013)2957-2965.
[8] C.X. Xie, Y.N. Dong, L.L. Zhang, G.W. Chu, Y. Luo, B.C. Sun, X.F. Zeng, J.F. Chen, Low-concentration CO₂ capture from natural gas power plants using a rotating packed bed reactor, Energy Fuels 33(3)(2019)1713-1721.
[9] A. Mondal, A. Pramanik, A. Bhowal, S. Datta, Distillation studies in rotating packed bed with split packing, Chem. Eng. Res. Des. 90(4)(2012)453-457.
[10] X.P. Li, Y.Z. Liu, Z.Q. Li, X.L. Wang, Continuous distillation experiment with rotating packed bed, Chin. J. Chem. Eng. 16(4)(2008)656-662.
[11] G.W. Chu, X. Gao, Y. Luo, H.K. Zou, L. Shao, J.F. Chen, Distillation studies in a two-stage counter-current rotating packed bed, Sep. Purif. Technol. 102(2013) 62-66.
[12] M.H. Yuan, Y.H. Chen, J.Y. Tsai, C.Y. Chang, Ammonia removal from ammoniarich wastewater by air stripping using a rotating packed bed, Process. Saf. Environ. Prot. 102(2016)777-785.
[13] M.H. Yuan, Y.H. Chen, J.Y. Tsai, C.Y. Chang, Removal of ammonia from wastewater by air stripping process in laboratory and pilot scales using a rotating packed bed at ambient temperature, J. Taiwan Inst. Chem. Eng. 60(2016)488-495.
[14] H.X. Gui, X.P. Li, Removing ammonia from skim by air stripping with rotating packed bed, Chin. J. Chem. Eng. 27(3)(2019)528-533.
[15] J.F. Chen, Y. Liu, Y. Zhang, Control of product distribution of Fischer-tropsch synthesis with a novel rotating packed-bed reactor:from diesel to light olefin, Ind. Eng. Chem. Res. 51(25)(2012)8700-8703.
[16] J.N. Leng, J.Y. Chen, D. Wang, J.X. Wang, Y. Pu, J.F. Chen, Scalable preparation of Gd₂O₃:Yb³⁺/Er³⁺ upconversion nanophosphors in a high-gravity rotating packed bed reactor for transparent upconversion luminescent films, Ind. Eng. Chem. Res. 56(28)(2017)7977-7983.
[17] M. Emami-Meibodi, M. Soleimani, S. Bani-Najarian, Toward enhancement of rotating packed bed (RPB) reactor for CaCO₃ nanoparticle synthesis, Int. Nano Lett. 8(3)(2018)189-199.
[18] S. Shao, D. Lei, Y. Song, L. Zhang, Y. Liu, W. Jiao, Cu-MnO_X·γ-Al₂O₃ Catalyzed ozonation of nitrobenzene in a high-gravity rotating packed bed, Ind. Eng. Chem. Res. 60(2021)2123-2135.
[19] L.L. Zhang, S.Y. Wu, Y. Gao, B.C. Sun, Y. Luo, H.K. Zou, G.W. Chu, J.F. Chen, Absorption of SO₂ with calcium-based solution in a rotating packed bed, Sep. Purif. Technol. 214(2019)148-155.
[20] L.L. Zhang, J.X. Wang, Y. Xiang, X.F. Zeng, J.F. Chen, Absorption of carbon dioxide with ionic liquid in a rotating packed bed contactor:mass transfer study, Ind. Eng. Chem. Res. 50(11)(2011)6957-6964.
[21] B.C. Sun, H.J. Zhou, M. Arowo, J.M. Chen, J.F. Chen, L. Shao, Preparation of basic magnesium carbonate by simultaneous absorption of NH₃ and CO₂ into MgCl₂ solution in an RPB, Powder Technol. 284(2015)57-62.
[22] Y.S. Chen, H.S. Liu, C.C. Lin, W.T. Liu, Micromixing in a rotating packed bed, J. Chem. Eng. Japan 37(9)(2004)1122-1128.
[23] Y.C. Yang, Y. Xiang, C. Pan, H.K. Zou, G.W. Chu, M. Arowo, J.F. Chen, Influence of viscosity on micromixing efficiency in a rotating packed bed with premixed liquid distributor, J. Chem. Eng. Japan 48(1)(2015)72-79.
[24] H.J. Yang, G.W. Chu, J.W. Zhang, Z.G. Shen, J.F. Chen, Micromixing efficiency in a rotating packed bed:experiments and simulation, Ind. Eng. Chem. Res. 44(20)(2005)7730-7737.
[25] H.J. Yang, G.W. Chu, Y. Xiang, J.F. Chen, Characterization of micromixing efficiency in rotating packed beds by chemical methods, Chem. Eng. J. 121(2-3)(2006)147-152.
[26] A. Kundu, L. Shakira Hassan, G. Redzwan, D. Robinson, M. Ali Hashim, B. SenGupta, Application of a rotating packed bed contactor for removal of Direct Red 23 by adsorption, Desalination Water Treat. 57(29)(2016)13518-13526.
[27] C.F. Chang, S.C. Lee, Adsorption behavior of pesticide methomyl on activated carbon in a high gravity rotating packed bed reactor, Water Res. 46(9)(2012) 2869-2880.
[28] K. Guo, F. Guo, Y.D. Feng, J.F. Chen, C. Zheng, N.C. Gardner, Synchronous visual and RTD study on liquid flow in rotating packed-bed contactor, Chem. Eng. Sci. 55(9)(2000)1699-1706.
[29] J.R. Burns, C. Ramshaw, Process intensification:Visual study of liquid maldistribution in rotating packed beds, Chem. Eng. Sci. 51(8)(1996) 1347-1352.
[30] A. Bašić, M.P. Duduković, Liquid holdup in rotating packed beds:Examination of the film flow assumption, AIChE J. 41(2)(1995)301-316.
[31] Y.C. Yang, Y. Xiang, G.W. Chu, H.K. Zou, Y. Luo, M. Arowo, J.F. Chen, A noninvasive X-ray technique for determination of liquid holdup in a rotating packed bed, Chem. Eng. Sci. 138(2015)244-255.
[32] X.Y. Gao, G.W. Chu, Y. Ouyang, H.K. Zou, Y. Luo, Y. Xiang, J.F. Chen, Gas flow characteristics in a rotating packed bed by particle image velocimetry measurement, Ind. Eng. Chem. Res. 56(48)(2017)14350-14361.
[33] L. Sang, Y. Luo, G.W. Chu, J.P. Zhang, Y. Xiang, J.F. Chen, Liquid flow pattern transition, droplet diameter and size distribution in the cavity zone of a rotating packed bed:a visual study, Chem. Eng. Sci. 158(2017)429-438.
[34] H.H. Tung, R.S.H. Mah, Modeling liquid mass transfer in higee separation process, Chem. Eng. Commun. 39(1-6)(1985)147-153.
[35] S. Munjal, M.P. Dudukovć, P. Ramachandran, Mass-transfer in rotating packed beds-I. Development of gas-liquid and liquid-solid mass-transfer correlations, Chem. Eng. Sci. 44(10)(1989)2245-2256.
[36] S. Munjal, M.P. Duduković, P. Ramachandran, Mass-transfer in rotating packed beds-II. Experimental results and comparison with theory and gravity flow, Chem. Eng. Sci. 44(10)(1989)2257-2268.
[37] A. Das, A. Bhowal, S. Datta, Continuous biosorption in rotating packed-bed contactor, Ind. Eng. Chem. Res. 47(12)(2008)4230-4235.
[38] Y.S. Chen, C.C. Lin, H.S. Liu, Mass transfer in a rotating packed bed with various radii of the bed, Ind. Eng. Chem. Res. 44(20)(2005)7868-7875.
[39] L. Sang, Y. Luo, G.W. Chu, Y.Z. Liu, X.Z. Liu, J.F. Chen, Modeling and experimental studies of mass transfer in the cavity zone of a rotating packed bed, Chem. Eng. Sci. 170(2017)355-364.
[40] D. Sebastia-Saez, S. Gu, P. Ranganathan, K. Papadikis, Micro-scale CFD modeling of reactive mass transfer in falling liquid films within structured packing materials, Int. J. Greenh. Gas Control. 33(2015)40-50.
[41] Z.H. Guo, Z.N. Sun, N. Zhang, M. Ding, S. Shi, CFD analysis of fluid flow and particle-to-fluid heat transfer in packed bed with radial layered configuration, Chem. Eng. Sci. 197(2019)357-370.
[42] A. Motamed Dashliborun, F. Larachi, Hydrodynamics of gas-liquid cocurrent downflow in floating packed beds, Chem. Eng. Sci. 137(2015) 665-676.
[43] A.M. Dashliborun, M. Hamidipour, F. Larach, Hydrodynamics of inclined packed beds under flow modulation-CFD simulation and experimental validation, AIChE J. 63(9)(2017)4161-4176.
[44] R. Rahimi, M.R. Rahimi, M. Zivdar, Efficiencies of sieve tray distillation columns by CFD simulation, Chem. Eng. Technol. 29(3)(2006)326-335.
[45] J.M. van Baten, J. Ellenberger, R. Krishna, Hydrodynamics of reactive distillation tray column with catalyst containing envelopes:experiments vs. CFD simulations, Catal. Today 66(2-4)(2001)233-240.
[46] A. Zarei, S.H. Hosseini, R. Rahimi, CFD and experimental studies of liquid weeping in the circular sieve tray columns, Chem. Eng. Res. Des. 91(12)(2013) 2333-2345.
[47] V.V. Buwa, V.V. Ranade, Dynamics of gas-liquid flow in a rectangular bubble column:experiments and single/multi-group CFD simulations, Chem. Eng. Sci. 57(22-23)(2002)4715-4736.
[48] M.V. Tabib, S.A. Roy, J.B. Joshi, CFD simulation of bubble column-An analysis of interphase forces and turbulence models, Chem. Eng. J. 139(3)(2008)589-614.
[49] M. Gholamzadehdevin, L. Pakzad, Hydrodynamic characteristics of an activated sludge bubble column through computational fluid dynamics (CFD) and response surface methodology (RSM), Can. J. Chem. Eng. 97(4) (2019)967-982.
[50] F. Kerdouss, A. Bannari, P. Proulx, CFD modeling of gas dispersion and bubble size in a double turbine stirred tank, Chem. Eng. Sci. 61(10)(2006)3313-3322.
[51] D.Y. Gu, Z.H. Liu, F.C. Qiu, J. Li, C.Y. Tao, Y.D. Wang, Design of impeller blades for efficient homogeneity of solid-liquid suspension in a stirred tank reactor, Adv. Powder Technol. 28(10)(2017)2514-2523.
[52] I.A. Escamilla-Ruiz, F.Z. Sierra-Espinosa, J.C. Garcia, A. Valera-Medina, F. Carrillo, Experimental data and numerical predictions of a single-phase flow in a batch square stirred tank reactor with a rotating cylinder agitator, Heat Mass Transf. 53(9)(2017)2933-2949.
[53] Y.F. Chen, B.Y. Dong, W.J. Qin, D.G. Xiao, Xylose and cellulose fractionation from corncob with three different strategies and separate fermentation of them to bioethanol, Bioresour. Technol. 101(18)(2010)7005-7010.
[54] G.R. Kasat, A.R. Khopkar, V.V. Ranade, A.B. Pandit, CFD simulation of liquidphase mixing in solid-liquid stirred reactor, Chem. Eng. Sci. 63(15)(2008) 3877-3885.
[55] H. Llerena-Chavez, F. Larachi, Analysis of flow in rotating packed beds via CFD simulations-Dry pressure drop and gas flow maldistribution, Chem. Eng. Sci. 64(9)(2009)2113-2126.
[56] W.J. Yang, Y.D. Wang, J.F. Chen, W.Y. Fei, Computational fluid dynamic simulation of fluid flow in a rotating packed bed, Chem. Eng. J. 156(3)(2010) 582-587.
[57] E.L. Martínez, R. Jaimes, J.L. Gomez, R.M. Filho, CFD simulation of threedimensional multiphase flow in a rotating packed bed. Computer Aided Chemical Engineering. Amsterdam:Elsevier (2012)1158-1162.
[58] X. Shi, Y. Xiang, L.X. Wen, J.F. Chen, CFD analysis of liquid phase flow in a rotating packed bed reactor, Chem. Eng. J. 228(2013)1040-1049.
[59] Y.C. Yang, Y. Xiang, Y.G. Li, G.W. Chu, H.K. Zou, M. Arowo, J.F. Chen, 3D CFD modelling and optimization of single-phase flow in rotating packed beds, Can. J. Chem. Eng. 93(6)(2015)1138-1148.
[60] Y.C. Yang, Y. Xiang, G.W. Chu, H.K. Zou, B.C. Sun, M. Arowo, J.F. Chen, CFD modeling of gas-liquid mass transfer process in a rotating packed bed, Chem. Eng. J. 294(2016)111-121.
[61] T.Y. Guo, K.P. Cheng, L.X. Wen, R. Andersson, J.F. Chen, Three-dimensional simulation on liquid flow in a rotating packed bed reactor, Ind. Eng. Chem. Res. 56(28)(2017)8169-8179.
[62] Y. Liu, Y. Luo, G.W. Chu, J.Z. Luo, M. Arowo, J.F. Chen, 3D numerical simulation of a rotating packed bed with structured stainless steel wire mesh packing, Chem. Eng. Sci. 170(2017)365-377.
[63] P. Xie, X.S. Lu, X. Yang, D. Ingham, L. Ma, M. Pourkashanian, Characteristics of liquid flow in a rotating packed bed for CO₂ capture:a CFD analysis, Chem. Eng. Sci. 172(2017)216-229.
[64] X. Lu, P. Xie, D.B. Ingham, L. Ma, M. Pourkashanian, A porous media model for CFD simulations of gas-liquid two-phase flow in rotating packed beds, Chem. Eng. Sci. 189(2018)123-134.
[65] Y. Ouyang, S.W. Wang, Y. Xiang, Z.M. Zhao, J.X. Wang, L. Shao, CFD analyses of liquid flow characteristics in a rotor-stator reactor, Chem. Eng. Res. Des. 134(2018)186-197.
[66] Y. Ouyang, H.K. Zou, X.Y. Gao, G.W. Chu, Y. Xiang, J.F. Chen, Computational fluid dynamics modeling of viscous liquid flow characteristics and end effect in rotating packed bed, Chem. Eng. Process.-Process. Intensif. 123(2018)185-194.
[67] W. Wu, Y. Luo, G.W. Chu, Y. Liu, H.K. Zou, J.F. Chen, Gas flow in a multiliquidinlet rotating packed bed:three-dimensional numerical simulation and internal optimization, Ind. Eng. Chem. Res. 57(6)(2018)2031-2040.
[68] X. Lu, P. Xie, D.B. Ingham, L. Ma, M. Pourkashanian, Modelling of CO₂ absorption in a rotating packed bed using an Eulerian porous media approach, Chem. Eng. Sci. 199(2019)302-318.
[69] P. Xie, X.S. Lu, H.B. Ding, X. Yang, D. Ingham, L. Ma, M. Pourkashanian, A mesoscale 3D CFD analysis of the liquid flow in a rotating packed bed, Chem. Eng. Sci. 199(2019)528-545.
[70] Y. Liu, W. Wu, Y. Luo, G.W. Chu, W. Liu, B.C. Sun, J.F. Chen, CFD Simulation and high-speed photography of liquid flow in the outer cavity zone of a rotating packed bed reactor, Ind. Eng. Chem. Res. 58(2019)5280-5290.
[71] W. Wu, Y. Luo, G.W. Chu, M.J. Su, Y. Cai, H.K. Zou, J.F. Chen, Liquid flow behavior in a multiliquid-inlet rotating packed bed reactor with threedimensional printed packing, Chem. Eng. J. 386(2020)121537.
[72] Y.C. Xu, Y.B. Li, Y.Z. Liu, Y. Luo, G.W. Chu, L.L. Zhang, J.F. Chen, Liquid jet impaction on the single-layer stainless steel wire mesh in a rotating packed bed reactor, AIChE J. 65(6)(2019) e16597.
[73] Y. Liu, Y. Luo, G.W. Chu, F. Larachi, H.K. Zou, J.F. Chen, Liquid microflow inside the packing of a rotating packed bed reactor:Computational, observational and experimental studies, Chem. Eng. J. 386(2020)121134.
[74] W. Zhang, P. Xie, Y.X. Li, L. Teng, J.L. Zhu, CFD analysis of the hydrodynamic characteristics in a rotating packed bed with multi-nozzles, Chem. Eng. Process.-Process. Intensif. 158(2020)108107.
[75] Y. Wang, Y.B. Li, M.J. Su, G.W. Chu, B.C. Sun, Y. Luo, Liquid droplet dispersion in a rotating packed bed:Experimental and numerical studies, Chem. Eng. Sci. 240(2021)116675.
[76] Y.S. Chen, F.Y. Lin, C.C. Lin, C.Y.D. Tai, H.S. Liu, Packing characteristics for mass transfer in a rotating packed bed, Ind. Eng. Chem. Res. 45(20)(2006)6846-6853.
[77] Y. Luo, J.Z. Luo, G.W. Chu, Z.Q. Zhao, M. Arowo, J.F. Chen, Investigation of effective interfacial area in a rotating packed bed with structured stainless steel wire mesh packing, Chem. Eng. Sci. 170(2017)347-354.
[78] X.H. Zheng, G.W. Chu, D.J. Kong, Y. Luo, J.P. Zhang, H.K. Zou, L.L. Zhang, J.F. Chen, Mass transfer intensification in a rotating packed bed with surfacemodified nickel foam packing, Chem. Eng. J. 285(2016)236-242.
[79] M.J. Su, Y. Luo, G.W. Chu, W. Liu, X.H. Zheng, J.F. Chen, Gas-side mass transfer in a rotating packed bed with structured nickel foam packing, Ind. Eng. Chem. Res. 57(13)(2018)4743-4747.
[80] K. Mohammadpour, A. Alkhalaf, E. Specht, CFD simulation of cross-flow mixing in a packed bed using porous media model and experimental validation, Comput. Part. Mech. 6(2)(2019)157-162.
[81] A. Atta, S. Roy, K.D.P. Nigam, Investigation of liquid maldistribution in tricklebed reactors using porous media concept in CFD, Chem. Eng. Sci. 62(24) (2007)7033-7044.
[82] A. Atta, S. Roy, K.D.P. Nigam, Prediction of pressure drop and liquid holdup in trickle bed reactor using relative permeability concept in CFD, Chem. Eng. Sci. 62(21)(2007)5870-5879.
[83] J.G. Wang, P. Rubini, Q. Qin, Application of a porous media model for the acoustic damping of perforated plate absorbers, Appl. Acoust. 127(2017)324-335.
[84] A. Narasimhan, K.S. Raju, Effect of variable permeability porous medium inter-connectors on the thermo-hydraulics of heat exchanger modelled as porous media, Int. J. Heat Mass Transf. 50(19-20)(2007)4052-4062.
[85] S. Ergun, Fluid flow through packed column, J. Mater. Sci. Chem. Eng. 48(2) (1952)89-94.
[86] H.S. Liu, C.C. Lin, S.C. Wu, H.W. Hsu, Characteristics of a rotating packed bed, Ind. Eng. Chem. Res. 35(10)(1996)3590-3596.
[87] S.K. Achwal, J.B. Stepanek, An alternative method of determining hold-up in gas-liquid systems, Chem. Eng. Sci. 30(11)(1975)1443-1444.
[88] J.R. Burns, J.N. Jamil, C. Ramshaw, Process intensification:operating characteristics of rotating packed beds-determination of liquid hold-up for a high-voidage structured packing, Chem. Eng. Sci. 55(13)(2000)2401-2415.
[89] A. Attou, C. Boyer, G. Ferschneider, Modelling of the hydrodynamics of the cocurrent gas-liquid trickle flow through a trickle-bed reactor, Chem. Eng. Sci. 54(6)(1999)785-802.
[90] K. Lappalainen, V. Alopaeus, M. Manninen, J. Aittamaa, Improved hydrodynamic model for wetting efficiency, pressure drop, and liquid holdup in trickle-bed reactors, Ind. Eng. Chem. Res. 47(21)(2008)8436-8444.
[91] I. Iliuta, C.F. Petre, F. Larachi, Hydrodynamic continuum model for two-phase flow structured-packing-containing columns, Chem. Eng. Sci. 59(4)(2004) 879-888.
[92] C. Zhang, A. Bokil, A quasi-three-dimensional approach to simulate the twophase fluid flow and heat transfer in condensers, Int. J. Heat Mass Transf. 40(15)(1997)3537-3546.
[93] P. Xie, X.S. Lu, D. Ingham, L. Ma, M. Pourkashanian, Mass transfer characteristics of the liquid film flow in a rotating packed bed for CO₂ capture:a micro-scale CFD analysis, Energy Procedia 142(2017)3407-3414.
[94] P. Sandilya, D.P. Rao, A. Sharma, G. Biswas, Gas-phase mass transfer in a centrifugal contactor, Ind. Eng. Chem. Res. 40(1)(2001)384-392.
[95] C. Zheng, K. Guo, Y.D. Feng, C. Yang, N.C. Gardner, Pressure drop of centripetal gas flow through rotating beds, Ind. Eng. Chem. Res. 39(3)(2000)829-834.
[96] G.W. Chu, Y.H. Song, H.J. Yang, J.M. Chen, H. Chen, J.F. Chen, Micromixing efficiency of a novel rotor-stator reactor, Chem. Eng. J. 128(2-3)(2007)191-196.
[97] Q.Y. Chen, G.W. Chu, Y. Luo, L. Sang, L.L. Zhang, H.K. Zou, J.F. Chen, Polytetrafluoroethylene wire mesh packing in a rotating packed bed:masstransfer studies, Ind. Eng. Chem. Res. 55(44)(2016)11606-11613.
[98] W. Liu, G.W. Chu, Y. Luo, Y.Z. Liu, F.Y. Meng, B.C. Sun, J.F. Chen, Mass transfer in a rotating packed bed reactor with a mesh-pin rotor:Modeling and experimental studies, Chem. Eng. J. 369(2019)600-610.
[99] A. Chandra, P.S. Goswami, D.P. Rao, Characteristics of flow in a rotating packed bed (HIGEE) with split packing, Ind. Eng. Chem. Res. 44(11)(2005) 4051-4060.
[100] Z.Q. Pan, X.H. Deng, Y.J. Zhang, Heat transfer between liquid and gas in multistage-spraying rotating packed bed, J. Chem. Ind. Eng. China 56(3) (2005)430-434.
[101] Y. Luo, G.W. Chu, H.K. Zou, F. Wang, Y. Xiang, L. Shao, J.F. Chen, Mass transfer studies in a rotating packed bed with novel rotors:chemisorption of CO₂, Ind. Eng. Chem. Res. 51(26)(2012)9164-9172.
[102] Y.B. Li, X.S. Wu, Y.Z. Liu, G.W. Chu, B.C. Sun, Y. Luo, J.F. Chen, Threedimensional large eddy simulation of wave characteristics of liquid film flow in a spinning disk reactor, AIChE J. 66(4)(2020) e16894.

Computational fluid dynamic simulation of gas-liquid flow in rotating packed bed: A review

Computational fluid dynamic simulation of gas-liquid flow in rotating packed bed: A review

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	Bo Yu, Guang Fu, Xinpei Li, Libo Zhang, Jing Li, Hongtao Qu, Dongbin Wang, Qingfeng Dong, Mengmeng Zhang. Arsenic removal from acidic industrial wastewater by ultrasonic activated phosphorus pentasulfide[J]. 中国化学工程学报, 2023, 60(8): 46-52.
[2]	Jiahao Xing, Huaizhi Han, Ruitian Yu, Wen Luo. Numerical simulation of flow and heat transfer of n-decane in sub-millimeter spiral tube at supercritical pressure[J]. 中国化学工程学报, 2023, 60(8): 173-185.
[3]	Jindong Dai, Chi Zhai, Jiali Ai, Guangren Yu, Haichao Lv, Wei Sun, Yongzhong Liu. A cellular automata framework for porous electrode reconstruction and reaction-diffusion simulation[J]. 中国化学工程学报, 2023, 60(8): 262-274.
[4]	Lijuan Zhao, Zhe Tan, Xiaoguang Zhang, Qijun Zhang, Wei Wang, Qiang Deng, Jie Ma, De'an Pan. Research on process modeling and simulation of spent lead paste desulfurization enhanced reactor[J]. 中国化学工程学报, 2023, 60(8): 293-303.
[5]	Anjun Liu, Jie Chen, Meng Guo, Chengmin Chen, Meihong Yang, Chao Yang. The internal circulations on internal mass transfer rate of a single drop in nonlinear uniaxial extensional flow[J]. 中国化学工程学报, 2023, 59(7): 51-60.
[6]	Jian Han, Xinhua Liu, Shanwei Hu, Nan Zhang, Jingjing Wang, Bin Liang. Optimization of decoupling combustion characteristics of coal briquettes and biomass pellets in household stoves[J]. 中国化学工程学报, 2023, 59(7): 182-192.
[7]	Bing Liu, Yingjiao Li, Moses Arowo, Guangwen Chu, Yong Luo, Liangliang Zhang, Haikui Zou, Baochang Sun. Sulfonation of 1, 4-diaminoanthraquinone leuco by chlorosulfonic acid: Kinetics and process intensification[J]. 中国化学工程学报, 2023, 58(6): 163-169.
[8]	Wende Tian, Jiawei Zhang, Zhe Cui, Haoran Zhang, Bin Liu. Microscopic mechanism study and process optimization of dimethyl carbonate production coupled biomass chemical looping gasification system[J]. 中国化学工程学报, 2023, 58(6): 291-305.
[9]	Huan-Huan Yin, Yin-Lei Han, Xiao Yan, Yi-Xin Guan. Proanthocyanidins prevent tau protein aggregation and disintegrate tau filaments[J]. 中国化学工程学报, 2023, 57(5): 63-71.
[10]	Jixiang Liu, Xin Zhou, Gengfei Yang, Hui Zhao, Zhibo Zhang, Xiang Feng, Hao Yan, Yibin Liu, Xiaobo Chen, Chaohe Yang. Conceptual carbon-reduction process design and quantitative sustainable assessment for concentrating high purity ethylene from wasted refinery gas[J]. 中国化学工程学报, 2023, 57(5): 290-308.
[11]	Shengfeng Luo, Song Zhang, Yiping Zeng, Hui Zhang, Lili Zheng, Zhaopeng Xu. Study on oxygen transport and titanium oxidation in coating cracks under parallel gas flow based on LBM modelling[J]. 中国化学工程学报, 2023, 56(4): 15-24.
[12]	Jikai Dong, Bing Wang, Xinjie Wang, Chenxi Cao, Shikuan Chen, Wenli Du. Optimization of sensor deployment sequences for hazardous gas leakage monitoring and source term estimation[J]. 中国化学工程学报, 2023, 56(4): 169-179.
[13]	Chengang Yang, Huaizhi Han, Quan Zhu, Xiangyuan Li. Cracking and buoyancy effect on hydrocarbon endothermic and heat transfer characteristics in rectangular mini-channel[J]. 中国化学工程学报, 2023, 56(4): 242-254.
[14]	Shuangfei Zhao, Yingying Nie, Wenyan Zhang, Runze Hu, Lianzhu Sheng, Wei He, Ning Zhu, Yuguang Li, Dong Ji, Kai Guo. Microfluidic field strategy for enhancement and scale up of liquid–liquid homogeneous chemical processes by optimization of 3D spiral baffle structure[J]. 中国化学工程学报, 2023, 56(4): 255-265.
[15]	Ming Chen, Huiyan Jiao, Jun Li, Zhibin Wang, Feng He, Yang Jin. Liquid–liquid two-phase flow in a wire-embedded concentric microchannel: Flow pattern and mass transfer performance[J]. 中国化学工程学报, 2023, 56(4): 281-289.