SCI和EI收录∣中国化工学会会刊

中国化学工程学报 ›› 2022, Vol. 52 ›› Issue (12): 146-153.DOI: 10.1016/j.cjche.2022.01.004

• Full Length Article • 上一篇    下一篇

Preparation of lithium carbonate by microwave assisted pyrolysis

Shen Wang1,2, Xiaokang Pei1,2, Yong Luo1,2, Guangwen Chu1,2, Haikui Zou2, Baochang Sun1,2   

  1. 1. State Key Laboratory of Organic-Inorganic Composites, Beijing University of Chemical Technology, Beijing 100029, China;
    2. Research Center of the Ministry of Education for High Gravity Engineering and Technology, Beijing University of Chemical Technology, Beijing 100029, China
  • 收稿日期:2021-08-03 修回日期:2022-01-04 出版日期:2022-12-28 发布日期:2023-01-31
  • 通讯作者: Guangwen Chu,E-mail:chugw@mail.buct.edu.cn;Baochang Sun,E-mail:sunbc@mail.buct.edu.cn
  • 基金资助:
    This work was supported by the National Natural Science Foundation of China (Nos. U1607114, 21878009, 21725601).

Preparation of lithium carbonate by microwave assisted pyrolysis

Shen Wang1,2, Xiaokang Pei1,2, Yong Luo1,2, Guangwen Chu1,2, Haikui Zou2, Baochang Sun1,2   

  1. 1. State Key Laboratory of Organic-Inorganic Composites, Beijing University of Chemical Technology, Beijing 100029, China;
    2. Research Center of the Ministry of Education for High Gravity Engineering and Technology, Beijing University of Chemical Technology, Beijing 100029, China
  • Received:2021-08-03 Revised:2022-01-04 Online:2022-12-28 Published:2023-01-31
  • Contact: Guangwen Chu,E-mail:chugw@mail.buct.edu.cn;Baochang Sun,E-mail:sunbc@mail.buct.edu.cn
  • Supported by:
    This work was supported by the National Natural Science Foundation of China (Nos. U1607114, 21878009, 21725601).

摘要: Investigations were conducted to purify crude Li2CO3 via direct carbonation with CO2 at atmospheric pressure and pyrolysis with both water bath heating method and microwave heating method. The reaction kinetics of LiHCO3 pyrolysis was studied and the effect of different operating conditions including initial concentration of LiHCO3 solution, pyrolysis temperature and stirring speed on the purity of Li2CO3 was investigated to obtain the optimal operating conditions. Results showed that the effect law is similar in the two pyrolysis processes. The purity of the Li2CO3 increases firstly and then decreases with the increase of the initial concentration of LiHCO3 solution and the stirring speed, while the purity of Li2CO3 first decreases and then increases with the increase of pyrolysis temperature. The product yield increases with the increase of initial concentration of LiHCO3 solution and pyrolysis temperature and is essentially unaffected by the stirring speed. Under the optimal operating conditions, the purity of Li2CO3 can reach up to 99.86% and 99.81% in water bath heating and microwave heating process, respectively. In addition, the pyrolysis rate of microwave assisted pyrolysis is 6 times that of water bath heating process, indicating that the microwave heating technology can significantly improve pyrolysis efficiency and reduce energy consumption.

关键词: Lithium bicarbonate, Pyrolysis process, Traditional heating, Microwave heating, Product yield

Abstract: Investigations were conducted to purify crude Li2CO3 via direct carbonation with CO2 at atmospheric pressure and pyrolysis with both water bath heating method and microwave heating method. The reaction kinetics of LiHCO3 pyrolysis was studied and the effect of different operating conditions including initial concentration of LiHCO3 solution, pyrolysis temperature and stirring speed on the purity of Li2CO3 was investigated to obtain the optimal operating conditions. Results showed that the effect law is similar in the two pyrolysis processes. The purity of the Li2CO3 increases firstly and then decreases with the increase of the initial concentration of LiHCO3 solution and the stirring speed, while the purity of Li2CO3 first decreases and then increases with the increase of pyrolysis temperature. The product yield increases with the increase of initial concentration of LiHCO3 solution and pyrolysis temperature and is essentially unaffected by the stirring speed. Under the optimal operating conditions, the purity of Li2CO3 can reach up to 99.86% and 99.81% in water bath heating and microwave heating process, respectively. In addition, the pyrolysis rate of microwave assisted pyrolysis is 6 times that of water bath heating process, indicating that the microwave heating technology can significantly improve pyrolysis efficiency and reduce energy consumption.

Key words: Lithium bicarbonate, Pyrolysis process, Traditional heating, Microwave heating, Product yield