Liquid–liquid two-phase flow in a wire-embedded concentric microchannel: Flow pattern and mass transfer performance

doi:10.1016/j.cjche.2022.07.013

中国化学工程学报 ›› 2023, Vol. 56 ›› Issue (4): 281-289.DOI: 10.1016/j.cjche.2022.07.013

• Full Length Article • 上一篇下一篇

Liquid–liquid two-phase flow in a wire-embedded concentric microchannel: Flow pattern and mass transfer performance

Ming Chen¹, Huiyan Jiao¹, Jun Li¹, Zhibin Wang², Feng He², Yang Jin¹

1. Engineering Research Center of Comprehensive Utilization and Clean Processing of Phosphorus Resources, School of Chemical Engineering, Sichuan University, Chengdu 610065, China;
2. The Key Laboratory of Fine Chemical Application Technology of Luzhou, Sichuan Vocational College of Chemical Technology, Luzhou 646300, China

收稿日期:2022-01-12 修回日期:2022-07-07 出版日期:2023-04-28 发布日期:2023-06-13
通讯作者: Yang Jin,E-mail:jinyangyoung@126.com
基金资助:
Financial supports from the following programs: the National Natural Science Foundation of China (21776180, 22108177), and the open project of the Key Laboratory of Fine Chemical Application Technology of Luzhou (HYJH-2102-A).

Liquid–liquid two-phase flow in a wire-embedded concentric microchannel: Flow pattern and mass transfer performance

Ming Chen¹, Huiyan Jiao¹, Jun Li¹, Zhibin Wang², Feng He², Yang Jin¹

1. Engineering Research Center of Comprehensive Utilization and Clean Processing of Phosphorus Resources, School of Chemical Engineering, Sichuan University, Chengdu 610065, China;
2. The Key Laboratory of Fine Chemical Application Technology of Luzhou, Sichuan Vocational College of Chemical Technology, Luzhou 646300, China

Received:2022-01-12 Revised:2022-07-07 Online:2023-04-28 Published:2023-06-13
Contact: Yang Jin,E-mail:jinyangyoung@126.com
Supported by:
Financial supports from the following programs: the National Natural Science Foundation of China (21776180, 22108177), and the open project of the Key Laboratory of Fine Chemical Application Technology of Luzhou (HYJH-2102-A).

摘要/Abstract

摘要： In this work, flow pattern and mass transfer of liquid–liquid two-phase flow in a wire-embedded concentric microchannel are studied using toluene–water system. Droplet flow, slug flow, oval flow and annular flow are observed in the wire-embedded concentric microchannel. The effects of embedded wires and physical properties on flow patterns are investigated. The embedded wire insert is conducive to the formation of annular flow. The flow pattern distribution regions are distinguished by the Ca_aq (capillary number)–We_org (Weber number) flow pattern map. When We_org<0.001, slug flow is the main flow pattern, and when We_org>0.1, annular flow is the main flow pattern. Oval flow and droplet flow are between We_org = 0.001–0.1, and oval flow is transformed into droplet flow with the increase of Ca_aq. The effect of flow rate, phase ratio, initial acetic acid concentration, insert shape and flow patterns on mass transfers are studied. Mass transfer process is enhanced under annular flow conditions, the volumetric mass transfer coefficient is up to 0.36 s^-1 because of the high interfacial area and interface renewal rate of annular flow.

关键词: Flow pattern, Mass transfer, Microchannels, Two-phase flow

Abstract: In this work, flow pattern and mass transfer of liquid–liquid two-phase flow in a wire-embedded concentric microchannel are studied using toluene–water system. Droplet flow, slug flow, oval flow and annular flow are observed in the wire-embedded concentric microchannel. The effects of embedded wires and physical properties on flow patterns are investigated. The embedded wire insert is conducive to the formation of annular flow. The flow pattern distribution regions are distinguished by the Ca_aq (capillary number)–We_org (Weber number) flow pattern map. When We_org<0.001, slug flow is the main flow pattern, and when We_org>0.1, annular flow is the main flow pattern. Oval flow and droplet flow are between We_org = 0.001–0.1, and oval flow is transformed into droplet flow with the increase of Ca_aq. The effect of flow rate, phase ratio, initial acetic acid concentration, insert shape and flow patterns on mass transfers are studied. Mass transfer process is enhanced under annular flow conditions, the volumetric mass transfer coefficient is up to 0.36 s^-1 because of the high interfacial area and interface renewal rate of annular flow.

Key words: Flow pattern, Mass transfer, Microchannels, Two-phase flow

Ming Chen, Huiyan Jiao, Jun Li, Zhibin Wang, Feng He, Yang Jin. Liquid–liquid two-phase flow in a wire-embedded concentric microchannel: Flow pattern and mass transfer performance[J]. 中国化学工程学报, 2023, 56(4): 281-289.

参考文献

[1] J.Y. Qian, X.J. Li, Z. Wu, Z.J. Jin, B. Sunden, A comprehensive review on liquid–liquid two-phase flow in microchannel: Flow pattern and mass transfer, Microfluid. Nanofluid. 23 (10) (2019) 1–30.
[2] D. Tsaoulidis, V. Dore, P. Angeli, N.V. Plechkova, K.R. Seddon, Dioxouranium(VI) extraction in microchannels using ionic liquids, Chem. Eng. J. 227 (2013) 151–157.
[3] N. Taarji, S. Vodo, M. Bouhoute, N. Khalid, A. Hafidi, I. Kobayashi, M.A. Neves, H. Isoda, M. Nakajima, Preparation of monodisperse O/W emulsions using a crude surface-active extract from argan by-products in microchannel emulsification, Colloids Surf. A Physicochem. Eng. Aspects 585 (2020) 124050.
[4] C.X. Fan, R. Ma, Y.B. Wang, J.H. Luo, Demulsification of oil-in-water emulsions in a novel rotating microchannel, Ind. Eng. Chem. Res. 59 (17) (2020) 8335–8345.
[5] D. Cheng, F.E. Chen, Experimental and numerical studies of the phase-transfer-catalyzed Wittig reaction in liquid–liquid slug-flow microchannels, Ind. Eng. Chem. Res. 59 (10) (2020) 4397–4410.
[6] N.D.M. Raimondi, L. Prat, Numerical study of the coupling between reaction and mass transfer for liquid–liquid slug flow in square microchannels, AIChE J. 57 (7) (2011) 1719–1732.
[7] Y.H. Li, D.G. Yamane, S.N. Li, S. Biswas, R.K. Reddy, J.S. Goettert, K. Nandakumar, C.S.S.R. Kumar, Geometric optimization of liquid–liquid slug flow in a flow-focusing millifluidic device for synthesis of nanomaterials, Chem. Eng. J. 217 (2013) 447–459.
[8] J. Gómez-Pastora, C. González-Fernández, M. Fallanza, E. Bringas, I. Ortiz, Flow patterns and mass transfer performance of miscible liquid–liquid flows in various microchannels: Numerical and experimental studies, Chem. Eng. J. 344 (2018) 487–497.
[9] P. Plouffe, D.M. Roberge, J. Sieber, M. Bittel, A. Macchi, Liquid–liquid mass transfer in a serpentine micro-reactor using various solvents, Chem. Eng. J. 285 (2016) 605–615.
[10] N.D.M. Raimondi, L. Prat, C. Gourdon, J. Tasselli, Experiments of mass transfer with liquid–liquid slug flow in square microchannels, Chem. Eng. Sci. 105 (2014) 169–178.
[11] F.T. Kanizawa, G. Ribatski, Two-phase flow patterns and pressure drop inside horizontal tubes containing twisted-tape inserts, Int. J. Multiph. Flow 47 (2012) 50–65.
[12] A. Salim, M. Fourar, J. Pironon, J. Sausse, Oil–water two-phase flow in microchannels: Flow patterns and pressure drop measurements, Can. J. Chem. Eng. 86 (6) (2008) 978–988.
[13] O.S. Osundare, G. Falcone, L.Y. Lao, A. Elliott, Liquid–liquid flow pattern prediction using relevant dimensionless parameter groups, Energies 13 (17) (2020) 4355.
[14] A. Matsuoka, K. Mae, Design strategy of a microchannel device for liquid–liquid extraction based on the relationship between mass transfer rate and two-phase flow pattern, Chem. Eng. Process. Process. Intensif. 160 (2021) 108297
[15] R.K. Verma, S. Ghosh, Effect of phase properties on liquid–liquid two-phase flow patterns and pressure drop in serpentine mini geometry, Chem. Eng. J. 397 (2020) 125443.
[16] P.S. Sarkar, K.K. Singh, K.T. Shenoy, A. Sinha, H. Rao, S.K. Ghosh, Liquid–liquid two-phase flow patterns in a serpentine microchannel, Ind. Eng. Chem. Res. 51 (13) (2012) 5056–5066.
[17] M. Darekar, K.K. Singh, S. Mukhopadhyay, K.T. Shenoy, Liquid–liquid two-phase flow patterns in Y-junction microchannels, Ind. Eng. Chem. Res. 56 (42) (2017) 12215–12226.
[18] A.A. Yagodnitsyna, A.V. Kovalev, A.V. Bilsky, Flow patterns of immiscible liquid–liquid flow in a rectangular microchannel with T-junction, Chem. Eng. J. 303 (2016) 547–554.
[19] A.V. Kovalev, A.A. Yagodnitsyna, A.V. Bilsky, Flow hydrodynamics of immiscible liquids with low viscosity ratio in a rectangular microchannel with T-junction, Chem. Eng. J. 352 (2018) 120–132.
[20] Y.C. Zhao, Y.H. Su, G.W. Chen, Q. Yuan, Effect of surface properties on the flow characteristics and mass transfer performance in microchannels, Chem. Eng. Sci. 65 (5) (2010) 1563–1570.
[21] P. Plouffe, D.M. Roberge, A. Macchi, Liquid–liquid flow regimes and mass transfer in various micro-reactors, Chem. Eng. J. 300 (2016) 9–19.
[22] M. Kashid, L. Kiwi-Minsker, Quantitative prediction of flow patterns in liquid–liquid flow in micro-capillaries, Chem. Eng. Process. Process. Intensif. 50 (10) (2011) 972–978.
[23] A.L. Dessimoz, L. Cavin, A. Renken, L. Kiwi-Minsker, Liquid–liquid two-phase flow patterns and mass transfer characteristics in rectangular glass microreactors, Chem. Eng. Sci. 63 (16) (2008) 4035–4044.
[24] Y.P. Chen, X.D. Liu, M.H. Shi, Hydrodynamics of double emulsion droplet in shear flow, Appl. Phys. Lett. 102 (5) (2013) 051609.
[25] X.D. Liu, C.Y. Wang, Y.J. Zhao, Y.P. Chen, Passing-over motion during binary collision between double emulsion droplets under shear, Chem. Eng. Sci. 183 (2018) 215–222.
[26] U. Novak, A. Pohar, I. Plazl, P. Žnidaršič-Plazl, Ionic liquid-based aqueous two-phase extraction within a microchannel system, Sep. Purif. Technol. 97 (2012) 172–178.
[27] M. Darekar, N. Sen, K.K. Singh, S. Mukhopadhyay, K.T. Shenoy, S.K. Ghosh, Liquid–liquid extraction in microchannels with zinc-D2EHPA system, Hydrometallurgy 144-145 (2014) 54–62.
[28] K.K. Singh, A.U. Renjith, K.T. Shenoy, Liquid–liquid extraction in microchannels and conventional stage-wise extractors: A comparative study, Chem. Eng. Process. Process. Intensif. 98 (2015) 95–105.
[29] J. Jovanović, E.V. Rebrov, T.A.X. Nijhuis, M.T. Kreutzer, V. Hessel, J.C. Schouten, Liquid–liquid flow in a capillary microreactor: Hydrodynamic flow patterns and extraction performance, Ind. Eng. Chem. Res. 51 (2) (2012) 1015–1026.
[30] Y. He, S.H. Guo, M.I. Khan, K.H. Chen, S.W. Li, L.B. Zhang, S.H. Yin, Liquid–liquid extraction of yttrium(III) using 2-ethylhexyl phosphonic acid mono-2-ethylhexyl (EHEHPA) in a microreactor: A comparative study, ACS Sustain. Chem. Eng. 7 (1) (2019) 1616–1621.
[31] T. Shimanouchi, Y. Kataoka, T. Tanifuji, Y. Kimura, S. Fujioka, K. Terasaka, Chemical conversion and liquid–liquid extraction of 5-hydroxymethylfurfural from fructose by slug flow microreactor, AIChE J. 62 (6) (2016) 2135–2143.
[32] A. Gupta, R. Kumar, Flow regime transition at high capillary numbers in a microfluidic T-junction: Viscosity contrast and geometry effect, Phys. Fluids 22 (12) (2010) 122001.
[33] X.Y. Wang, K. Wang, A. Riaud, X. Wang, G.S. Luo, Experimental study of liquid/liquid second-dispersion process in constrictive microchannels, Chem. Eng. J. 254 (2014) 443–451.
[34] Z.H. Qiao, Z. Wang, C.X. Zhang, S.J. Yuan, Y.Q. Zhu, J.X. Wang, S.C. Wang, PVAm-PIP/PS composite membrane with high performance for CO₂/N₂ separation, AIChE J. 59 (1) (2013) 215–228.
[35] S.K.R. Cherlo, S. Kariveti, S. Pushpavanam, Experimental and numerical investigations of two-phase (liquid–liquid) flow behavior in rectangular microchannels, Ind. Eng. Chem. Res. 49 (2) (2010) 893–899.

Liquid–liquid two-phase flow in a wire-embedded concentric microchannel: Flow pattern and mass transfer performance

Liquid–liquid two-phase flow in a wire-embedded concentric microchannel: Flow pattern and mass transfer performance

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	Xuejing He, Zhenlin Li, Ji Wang, Hai Yu. Effects of tube cross-sectional shapes on flow pattern, liquid film and heat transfer of n-pentane across tube bundles[J]. 中国化学工程学报, 2023, 60(8): 16-25.
[2]	Bo Yu, Guang Fu, Xinpei Li, Libo Zhang, Jing Li, Hongtao Qu, Dongbin Wang, Qingfeng Dong, Mengmeng Zhang. Arsenic removal from acidic industrial wastewater by ultrasonic activated phosphorus pentasulfide[J]. 中国化学工程学报, 2023, 60(8): 46-52.
[3]	Anjun Liu, Jie Chen, Meng Guo, Chengmin Chen, Meihong Yang, Chao Yang. The internal circulations on internal mass transfer rate of a single drop in nonlinear uniaxial extensional flow[J]. 中国化学工程学报, 2023, 59(7): 51-60.
[4]	Wen Tian, Junyi Ji, Hongjiao Li, Changjun Liu, Lei Song, Kui Ma, Siyang Tang, Shan Zhong, Hairong Yue, Bin Liang. Measurements of the effective mass transfer areas for the gas–liquid rotating packed bed[J]. 中国化学工程学报, 2023, 55(3): 13-19.
[5]	Qi Han, Xin-Yuan Zhang, Hai-Bo Wu, Xian-Tai Zhou, Hong-Bing Ji. Different efficiency toward the biomimetic aerobic oxidation of benzyl alcohol in microchannel and bubble column reactors: Hydrodynamic characteristics and gas–liquid mass transfer[J]. 中国化学工程学报, 2023, 55(3): 84-92.
[6]	Chunxin Fan, Zini Guo, Jianhong Luo. Study on an improved rotating microchannel separator in the intensification for demulsification and separation process[J]. 中国化学工程学报, 2023, 55(3): 181-191.
[7]	Qinyan Wang, Yang Jin, Jun Li, Yongbo Zhou, Ming Chen. Study on liquid–liquid two-phase mass transfer characteristics in the microchannel with deformed insert[J]. 中国化学工程学报, 2023, 54(2): 114-126.
[8]	Zhiwei Wang, Yu Zhang, Zhi Zhang, Daowei Zhou, Zhikai Cao, Yong Sha. Investigation on catalytic distillation for ethyl acetate production with different catalytic packing structures[J]. 中国化学工程学报, 2023, 53(1): 63-72.
[9]	Yongbo Zhou, Yang Jin, Jun Li, Qinyan Wang, Ming Chen. Numerical study on the hydrodynamics behavior of a central insert microchannel[J]. 中国化学工程学报, 2023, 53(1): 361-373.
[10]	Ting He, Songhong Yu, Jinhui He, Dejian Chen, Jie Li, Hongjun Hu, Xingrui Zhong, Yawei Wang, Zhaohui Wang, Zhaoliang Cui. Membranes for extracorporeal membrane oxygenator (ECMO): History, preparation, modification and mass transfer[J]. 中国化学工程学报, 2022, 49(9): 46-75.
[11]	Zhi-Guo Yuan, Yu-Xia Wang, You-Zhi Liu, Dan Wang, Wei-Zhou Jiao, Peng-Fei Liang. Research and development of advanced structured packing in a rotating packed bed[J]. 中国化学工程学报, 2022, 49(9): 178-186.
[12]	Xing Su, Ning Qiao, Bao-Chang Sun. A route for the study on mass transfer enhancement by adding particles in liquid phase[J]. 中国化学工程学报, 2022, 48(8): 158-165.
[13]	Zewen Chen, Yongjun Wu, Jian Wang, Peicheng Luo. Study on the solid–liquid suspension behavior in a tank stirred by the long-short blades impeller[J]. 中国化学工程学报, 2022, 47(7): 79-88.
[14]	Ye Zhang, Yong Gao, Peng Wang, Duo Na, Zhenming Yang, Jinsong Zhang. Solvent extraction with a three-dimensional reticulated hollow-strut SiC foam microchannel reactor[J]. 中国化学工程学报, 2022, 46(6): 53-62.
[15]	Youfang Ma, Youfu Ma, Junfu Lyu, Weiye Liu. Experimental study on prediction model of wet gas pressure drop across single-orifice plate in horizontal pipes in the low gas phase Froude number region[J]. 中国化学工程学报, 2022, 46(6): 63-72.