[1] M. Koor, A. Vassiljev, T. Koppel, Optimization of pump efficiencies with different pumps characteristics working in parallel mode, Adv. Eng. Softw. 101(2016)69-76. [2] S.Q. Liu, J.C. Song, J. Shi, B. Yang, An improved series-parallel optimization approach for cooling water system, Appl. Therm. Eng. 154(2019)368-379. [3] K.V. Gololo, T. Majozi, On synthesis and optimization of cooling water systems with multiple cooling towers, Ind. Eng. Chem. Res. 50(7)(2011)3775-3787. [4] P.S. Varbanov, X.X. Jia, D.J. Kukulka, X. Liu, J.J. Kleme s, Emission minimisation by improving heat transfer, energy conversion, CO2 integration and effective training, Appl. Therm. Eng. 131(2018)531-539. [5] C.B. Carvalho, M.A.S.S. Ravagnani, M.J. Bagajewicz, A.L.H. Costa, Globally optimal design of air coolers considering fan performance, Appl. Therm. Eng. 161(2019)114188. [6] J.R. Liang, L.H. Li, Y.G. Li, Y.F. Wang, X. Feng, Operation optimization of existing industrial circulating water system considering variable frequency drive, Chem. Eng. Res. Des. 186(2022)387-397. [7] R.F.F. Pontes, J.M. Pinto, E.K.G. Silva, Optimal design and operation of cooling water pumping systems, Comput. Chem. Eng. 157(2022)107581. [8] J.K. Kim, R. Smith, Cooling water system design, Chem. Eng. Sci. 56(12)(2001)3641-3658. [9] J.M. Ponce-Ortega, M. Serna-Gonzalez, A. Jim enez-Guti errez, MINLP synthesis of optimal cooling networks, Chem. Eng. Sci. 62(21)(2007)5728-5735. [10] J. Berce, M. Zupan ci c, M. Mo ze, I. Golobi c, A review of crystallization fouling in heat exchangers, Processes 9(8)(2021)1356. [11] R. Steinhagen, H. Müller-Steinhagen, K. Maani, Problems and costs due to heat exchanger fouling in New Zealand industries, Heat Transf. Eng. 14(1)(1993)19-30. [12] M. Awais, A.A. Bhuiyan, Recent advancements in impedance of fouling resistance and particulate depositions in heat exchangers, Int. J. Heat Mass Transf. 141(2019)580-603. [13] D. Kern, R. Seaton, A theoretical analysis of thermal surface fouling, Br. Chem. Eng. 4(1959)258-262. [14] O.P. Arsenyeva, B. Crittenden, M.Y. Yang, P.O. Kapustenko, Accounting for the thermal resistance of cooling water fouling in plate heat exchangers, Appl. Therm. Eng. 61(1)(2013)53-59. [15] C. Shen, C. Cirone, X.L. Wang, A method for developing a prediction model of water-side fouling on enhanced tubes, Int. J. Heat Mass Transf. 85(2015)336-342. [16] Y.F. Wang, S.H. Zhan, X. Feng, Optimization of velocity for energy saving and mitigating fouling in a crude oil preheat train with fixed network structure, Energy 93(2015)1478-1488. [17] R. Gao, C. Shen, X.L. Wang, Y. Yao, Experimental study on the sticking probability and deposit bond strength of fouling in enhanced tubes, Int. Commun. Heat Mass Transf. 103(2019)17-23. [18] M.Z. Abedin, N.H. Kim, An experimental study on accelerated fouling of aluminum oxide and ferric oxide particles in internally enhanced tubes, J. Mech. Sci. Technol. 30(12)(2016)5707-5714. [19] K. Rahmani, Reducing water consumption by increasing the cycles of concentration and Considerations of corrosion and scaling in a cooling system, Appl. Therm. Eng. 114(2017)849-856. [20] W. Ebert, C.B. Panchal, Analysis of Exxon Crude-Oil-Slip Stream Coking Data, Argonne National Lab.(ANL), Argonne, IL (United States), 1995[2023-02-21], https://www.osti.gov/biblio/453433. [21] E.M. Ishiyama, W.R. Paterson, D.I. Wilson, Platform for techno-economic analysis of fouling mitigation options in refinery preheat trains, Energy Fuels 23(3)(2009)1323-1337. [22] C. Rodriguez, R. Smith, Optimization of operating conditions for mitigating fouling in heat exchanger networks, Chem. Eng. Res. Des. 85(6)(2007)839-851. [23] L. Cremaschi, X.X. Wu, Effect of fouling on the thermal performance of condensers and on the water consumption in cooling tower systems, Heat Transf. Eng. 36(7-8)(2015)663-675. [24] A.R.C. Souza, L.H. Costa, Modeling and simulation of cooling water systems subjected to fouling, Chem. Eng. Res. Des. 141(2019)15-31. [25] J.Y. Tian, Y.F. Wang, X. Feng, Simultaneous optimization of flow velocity and cleaning schedule for mitigating fouling in refinery heat exchanger networks, Energy 109(2016)1118-1129. [26] E. Diaz-Bejarano, F. Coletti, S. Macchietto, Thermo-hydraulic analysis of refinery heat exchangers undergoing fouling, AlChE. J. 63(3)(2017)984-1001. [27] Y.I. Cho, W.T. Kim, D.C. Kim, Fouling mitigation in a heat exchanger:High cycles of concentration for a cooling-tower application, Exp. Heat Transf. 19(2)(2006)113-128. [28] J.Z. Ma, Y.F. Wang, X. Feng, D.M. Xu, Synthesis cooling water system with air coolers, Chem. Eng. Res. Des. 131(2018)643-655. [29] M.H. Panjeshahi, A. Ataei, M. Gharaie, R. Parand, Optimum design of cooling water systems for energy and water conservation, Chem. Eng. Res. Des. 87(2)(2009)200-209. [30] J.Z. Ma, Y.F. Wang, X. Feng, Optimization of multi-plants cooling water system, Energy 150(2018)797-815. |