1 Matarrese, S., Rossi, G.A., Consolo, M.L., Cigna, G., Borghi, I., “Process for the continuous production in solution of styrene thermoplastic resins”, Eur. Pat., 0286071 (1988). 2 Feres, V., “Thin-film evaporators”, U.S. Pat., 4707220 (1986). 3 Parrillo, D., Singh, P., “Method for isolating polyphenylene ether polymer resins from solution”, U.S. Pat., 6860966 (2001). 4 Xi, Z.H., Zhao, L., Liu, Z.Y., “New falling film reactor for melt polycondensation process”, Macromol. Symp., 259, 10-16 (2007). 5 Hasson, A., Gerhart, R.J., “Method for removing volatile substances from polyphenylene ether resin blends”, U.S. Pat., 5102591 (1989). 6 Khanin, D., Scarola, L.S., “A process for devolatilization”, Eur. Pat., 0920966 (1998). 7 Schmidt, L.R., Caraher, J.M., Maxam, J.L., “Method for extruder devolatilization of spiro(bis)indane polycarbonates”, U.S. Pat., 4980105 (1989). 8 Tukachinsky, A., Talmon Y., Tadmor, Z., “Foam-enhanced devolatilization of polystyrene melt in a vented extruder”, AIChE J., 40 (4), 670-675 (1994). 9 Roberts, G.W., “A surface renewal model for the drying of polymers during screw extrusion”, AIChE J., 16 (5), 878-882 (1970). 10 Biesenberger, J.A., “Polymer devolatilization:Theory of equipment”, Polym. Eng. Sci., 20 (15), 1015-1022 (1980). 11 Secor, R.M., “A mass transfer model for a twin-screw extruder”, Polym. Eng. Sci., 26 (9), 647-652 (1986). 12 Han, H.P., Han, C.D., “The mechanism of foam devolatilization in partially filled screw devolatilizers”, Polym. Eng. Sci., 26 (10), 673-681 (1986). 13 Albalak, R.J., Tadmor, Z., Talmon, Y., “Scanning electron microscopy studies of polymer melt devolatilization”, AIChE J., 33 (5), 808-818 (1987). 14 Albalak, R.J., Tadmor, Z., Talmon, Y., “Polymer melt devolatilization mechanisms”, AIChE J., 36 (9), 1313-1320 (1990). 15 Biesenberger, J.A., Lee, S.T., “A fundamental study of polymer melt devolatilization (I) Some experiments on foam-enhanced devolatilization”, Polym. Eng. Sci., 26 (14), 982-988 (1986). 16 Biesenberger, J.A., Lee, S.T., “A fundamental study of polymer melt devolatilization (Ⅲ) More experiments on foam-enhanced DV”, Polym. Eng. Sci., 27 (7), 510-517 (1987). 17 Lee, S.T., Biesenberger, J.A., “A fundamental study of polymer melt devolatilization (Ⅳ) Some theories and models for foam-enhanced devolatilization”, Polym. Eng. Sci., 29 (12), 782-790 (1989). 18 Yang, C.T., Smith, T.G., Bigio, D.I., Anolick, C., “A model for foam devolatilization in an extruder”, Ind. Eng. Chem. Res., 37, 1464-1472 (1998). 19 Wang, M., Zou, H.K., Shao, L., Chen, J.F., “Controlling factors and mechanism of preparing needlelike CaCO3 under high-gravity environment”, Powder Technol., 142, 166-174 (2004). 20 Chen, J.F., Shao, L., Zhang, C.G., Chen, J.M., Chu, G.W., “Preparation of TiO2 nanoparticles by a rotating packed bed reactor”, J. Mater. Sci. Lett., 22:437-439 (2003). 21 Chen, J.F., Shao, L., Guo, F., Wang, X.M., “Synthesis of nano-fibers of aluminum hydroxide in novel rotating packed bed reactor”, Chem. Eng. Sci., 58, 569-575 (2003). 22 Wang, D.G., Guo, F., Chen, J.F., Liu, H., Zhang, Z.T., “Preparation of nano aluminium trihydroxide by high gravity reactive precipitation”, Chem. Eng. J., 121, 109-114 (2006). 23 Lin, C.C., Su, Y.R., “Performance of rotating packed beds in removing ozone from gaseous streams”, Sep. Purif. Technol., 61, 311-316 (2008). 24 Lin, C.C., Jian, G.S., “Characteristics of a rotating packed bed equipped with blade packings”, Sep. Purif. Technol., 54, 51-60 (2007). 25 Lin, C.C., Wei, T.Y., Hsu, S.K., Liu, W.T., “Performance of a pilot-scale cross-flow rotating packed bed in removing VOCs from waste gas streams”, Sep. Purif. Technol., 52, 274-279 (2006). 26 Cheng, H.H., Tan, C.S., “Reduction of CO2 concentration in a zinc/air battery by absorption in a rotating packed bed”, J. Power Sources, 162, 1431-1436 (2006). 27 Li, X.P., Liu, Y.Z., Li, Z.Q., Wang, X.L., “Continuous distillation experiment with rotating packed bed”, Chin. J. Chem. Eng., 16 (4), 656-662 (2008). 28 Chen, Y.H., Chang, C.Y., Su, W.L., Chen, C.C., Chiu, C.Y., Yu, Y.H., Chiang, P.C., Chiang, S.I.M. “Modeling ozone contacting process in a rotating packed bed”, Ind. Eng. Chem. Res., 43, 228-236 (2004). 29 Chen, Y.H., Chiu, C.Y., Chang, C.Y., Huang, Y.H., Yu, Y.H., Chiang, P.C., SHie, J.L., Chiou, C.S., “Modeling ozonation process with pollutant in a rotating packed bed”, Ind. Eng. Chem. Res., 44 (1), 21-29 (2005). 30 Chen, J.F., High Gravity Technology and Application-Novel Reactive and Separation Technology, Chemical Industry Press, Beijing (2002). (in Chinese) 31 Guo, K., “A study on liquid flowing inside the higee rotor”, Ph. D. Thesis, Beijing University of Chemical Technology, Beijing (1996). (in Chinese) 32 Zhang, J., “Experiment and simulation on liquid flowing and mass transfer inside the rotating packed bed”, Ph. D. Thesis, Beijing University of Chemical Technology, Beijing (1996). (in Chinese) 33 Liang, J.G., “Numberical simulation of micromixing process in rotating packed bed”, Master Thesis, Beijing University of Chemical Technology, Beijing (2003).(in Chinese) 34 Yang, S., Lin, C.C., Tseng, I.M., Liu, W.T., Yu, H.T., “Method for removing volatile components from a high viscosity liquid by using rotation pack bed”, U.S. Pat., 6884401 (2005). 35 Li, W.Y., Wu, W., Zou, H.K., Chu, G.W., Shao, L., Chen, J.F., “Process intensification of VOC removal from high viscous media by rotating packed bed”, Chin. J. Chem. Eng., 17 (3), 389-393 (2009). 36 Chen, J.F., Li,W.Y., Chu, G.W., Zou, H.K., Wu, W., Zhang, P.Y., “Method and apparatus for removing volatile components from polymer”, CN. Pat., 200710120712.7 (2007). (in Chinese) 37 Stewart, C.W., “Nucleation and growth of bubbles in elastomers”, J. Polym. Sci.:Part A-2, 8, 937-955 (1970). 38 Wang, N.H. “Comparison of the devolatilizing performances between single and twin screw extruders”, In:The 16th Polymer Processing Society Annual Meeting, Shanghai (2000). 39 Xu, Z.F., Khoo, B.C., Eijeysundera, N.E., “Mass transfer across the falling film:Simulations and experiments”, Chem. Eng. Sci., 63, 2559-2575 (2008). 40 Akanksha, Pant, K.K., Srivastava, V.K., “Mass transport correlation for CO2 absorption in aqueous monoethanolamine in a continuous film contactor”, Chem. Eng. Process., 47, 920-928 (2008). 41 Bourgois, D., Vanderschuren, J., Thomas, D., “Study of mass transfer of VOCs into viscous solvents in a pilot-scale cables-bundle scrubber”, Chem. Eng. J., 145 (3), 446-452 (2009). 42 Hayduk, W., Cheng, S.C., “Review of relation between diffusivity and solvent viscosity in dilute liquid solutions”, Chem. Eng. Sci., 26, 635-646 (1971). 43 Munjal, S., Dudukovic, M.P., Ramachandran, P., “Mass-transfer in rotating packed beds (I) Development of gas-liquid and liquid-solid mass-transfer correlations”, Chem. Eng. Sci., 44 (10), 2245-2256 (1989). |