SCI和EI收录∣中国化工学会会刊

›› 2010, Vol. 18 ›› Issue (3): 362-371.

• • 上一篇    下一篇

Modeling of Mass Transfer in Nonideal Multicomponent Mixture with Maxwell-Stefan Approach

宋一鸣, 宋金荣, 龚明, 曹彬, 杨燕红, 马晓迅   

  1. 1. School of Chemical Engineering, Northwest University, Xi'an 710069, China;
    2. Chemical Engineering Research Center of the Ministry of Education for Advanced Use Technology of Shanbei Energy, Xi'an 710069, China
  • 收稿日期:2009-12-24 修回日期:2010-03-29 出版日期:2010-06-28 发布日期:2010-06-28
  • 通讯作者: MA Xiaoxun,E-mail:maxym@nwu.edu.cn
  • 基金资助:
    Supported by the National Natural Science Foundation of China(20776118);Science&Technology Bureau of Xi'an[CXY09019(1)];Innovation Foundation for Graduated Student of Northwest University(08YJC21);Shaanxi Research Centerof Engineering Technology for Clean Coal Conversion(2008ZDGC-13)

Modeling of Mass Transfer in Nonideal Multicomponent Mixture with Maxwell-Stefan Approach

SONG Yiming, SONG Jinrong, GONG Ming, CAO Bin, YANG Yanhong, MA Xiaoxun   

  1. 1. School of Chemical Engineering, Northwest University, Xi'an 710069, China;
    2. Chemical Engineering Research Center of the Ministry of Education for Advanced Use Technology of Shanbei Energy, Xi'an 710069, China
  • Received:2009-12-24 Revised:2010-03-29 Online:2010-06-28 Published:2010-06-28
  • Supported by:
    Supported by the National Natural Science Foundation of China(20776118);Science&Technology Bureau of Xi'an[CXY09019(1)];Innovation Foundation for Graduated Student of Northwest University(08YJC21);Shaanxi Research Centerof Engineering Technology for Clean Coal Conversion(2008ZDGC-13)

摘要: The Intalox metal tower packing was used to simulate an industrial relevant extractive distillation column for purifying azeotropic multicomponent mixture.In order to explain the inconsistencies in the modeling of transfer process in nonideal multicomponent distillation column,a method was developed with equilibrium stage models(EQ)and non-equilibrium model(NEQ)incorporated with Maxwell-Stefan diffusion equations in the framework of AspenONE simulator.Dortmund Modified UNIFAC(UNIFAC-DMD)thermodynamic model was employed to estimate activity coefficients.In addition,to understand the reason for the diffusion against driving force and the different results by EQ and NEQ models,explicit investigations were made on diffusion coefficients, component Murphree efficiency and mass transfer coefficients.The results provide valuable information for basic design and applications associated with extractive distillation.

关键词: rate based model, equilibrium model, mass transfer coefficient, Murphree efficiency, extractive distillation, simulation

Abstract: The Intalox metal tower packing was used to simulate an industrial relevant extractive distillation column for purifying azeotropic multicomponent mixture.In order to explain the inconsistencies in the modeling of transfer process in nonideal multicomponent distillation column,a method was developed with equilibrium stage models(EQ)and non-equilibrium model(NEQ)incorporated with Maxwell-Stefan diffusion equations in the framework of AspenONE simulator.Dortmund Modified UNIFAC(UNIFAC-DMD)thermodynamic model was employed to estimate activity coefficients.In addition,to understand the reason for the diffusion against driving force and the different results by EQ and NEQ models,explicit investigations were made on diffusion coefficients, component Murphree efficiency and mass transfer coefficients.The results provide valuable information for basic design and applications associated with extractive distillation.

Key words: rate based model, equilibrium model, mass transfer coefficient, Murphree efficiency, extractive distillation, simulation