1 Bhasin,M. M.,McCain,J.H.,Vora,B.V.,Imaib,T.,Pujado,P.R.,“Dehydrogenation and oxydehydrogenation of paraffins to olefins”,Appl.Catal.A Gen.,221,397-419(2001). 2 Gascon,J.,Tellez,C.,Herguido,J.,Menendez,M.,“A two-zone fluidized bed reactor for catalytic propane dehydrogenation”,Chem.Eng.J.,106,91-96(2005). 3 Domenico,S.,Ivano,M.,“Dehydrogenation of paraffins:Synergies between catalyst design and reactor engineering”,Catal.Today,111,133-139(2006). 4 de Graaf,E.A.,Zwanenburg,G.,Rothenberg,G.,Bliek,A.,“Two-step catalytic oxidative dehydrogenation of propane:An alternative route to propene”,Org.Process Res.Dev.,9,397-403 (2005). 5 Akporiaye,D.,Jensen,S. F.,Olsbye,U.,Rohr,F.,Rytter,E.,R?nnekleiv,M.,Spjelkavik,A. I.,“A novel,highly efficient catalyst for propane dehydrogenation”,Ind.Eng.Chem.Res.,40,4741-4748(2001). 6 van Sint Annaland,M.,Kuipers,J. A. M.,van Swaaij,W. P. M.,“A kinetic rate expression for the time-dependent coke formation rate during propane dehydrogenation over a platinum alumina monolithic catalyst”,Catal.Today,66,427-436(2001). 7 Gasoon,J.,Te11ez,C.,Herguido,J.,“Propane dehydrogenation over a Cr2O3/Al2O3 catalysttransient kinetic modeling of propene and coke formation”,Appl.Catal.A Gen.,248,105-116(2003). 8 Gilbert,F.F.,Kenneth,B. B.,Chemical Reactor Analysis and Design,Wiley,New York(1979). 9 Sampath,B.S.,Hughes,R.,“A review of mathematical models in single particle gas solid non-catalytic reactions”,Chem.Engr.,278,485-497(1973). 10 Sampath,B.S.,Ramachandran,P. A.,Hughes,R.,“Modelling of non-catalytic gas-solid reactions-I.Transient analysis of the particle-pellet model”,Chem.Eng.Sci.,30,125-134(1975). 11 Sampath,B.S.,Ramachandran,P.A.,Hughes,R.,“Modelling of non-catalytic gas-solid reactions-II.Transient simulation of a packed bed model”,Chem.Eng. Sci.,30,135-143(1975). 12 Xie,X.A.,Hua,B.,Chen,Q.L.,“Study on models of coke burning regeneration for FCC coked catalyst (I):Establishment of physical coke burning regeneration models for zeolite catalyst”,Petroleum Refinery Engineering(China),31,40-43(2001).(in Chinese) 13 Tang,D. H.,Kern,C.,Jess,A.,“Influence of chemical reaction rate,diffusion and pore structure on the regeneration of a coked Al2O3 catalyst”,Appl.Catal.A Gen.,272,187-199(2004). 14 Kern,C.,Andreas,J.,“Regeneration of coked catalysts—Modeling and verification of coke burn-off in single particles and fixed bed reactors”,Chem.Eng.Sci.,60,4249-4264(2005). 15 Brito,A.,Arvelo,R.,Garcia,F.J.,Gonzalez,A.R.,“The modified grain model applied to regeneration of a coked fixed-bed reactor:The catalytic effect of chromium on the coke burn-off reaction”,Appl.Catal.A Gen.,145,285-295 (1996). 16 Mickley,H.S.,Nesyor,J. W.,Leonard Jr.,Gould,A.,“A kinetic study of the regeneration of a dehydrogenation catalyst”,Can.J.Chem.Eng.,4,61-68(1965). 17 Li,S. F.,Chemical and Catalytic Reaction Engineering,Chemical Industry Press,Beijing(1986).(in Chinese) 18 Shi,J.,Wang,J.D.,Yu,G. C.,Chen,M. H.,Chemical Engineering Handbook,Chemical Industry Press,Beijing(1996).(in Chinese) 19 Borio,D. O.,MenBndez,M.,Santamaria,J.,“Simulation and optimization of a fixed bed reactor operating in coking-regeneration cycles”,Ind.Eng.Chem.Res.,31,2699-2707(1992). |