A New Optimal Control System Design for Chemical Processes

doi:10.1016/S1004-9541(13)60642-4

Chinese Journal of Chemical Engineering ›› 2013, Vol. 21 ›› Issue (12): 1341-1346.DOI: 10.1016/S1004-9541(13)60642-4

• 过程系统工程与过程安全 • 上一篇下一篇

A New Optimal Control System Design for Chemical Processes

丛二丁^1,2, 胡明慧¹, 涂善东¹, 邵惠鹤³

1 Key Laboratory of Pressure Systems and Safety of Ministry of Education, East China University of Science and Technology, Shanghai 200237, China;
2 Petro-China Jilin Petrochemical Company, Jilin 132021, China;
3 School of Electrionic, Information and Electrical Engineering, Shanghai Jiaotong University, Shanghai 200240, China

收稿日期:2013-04-12 修回日期:2013-11-05 出版日期:2013-12-28 发布日期:2013-12-27
通讯作者: HU Minghui
基金资助:
Supported by the National Natural Science Foundation of China (51205133), Natural Science Foundation of Shanghai (11ZR1409000), Ph.D. Programs Foundation of Ministry of Education of China (20110074120007).

A New Optimal Control System Design for Chemical Processes

CONG Erding^1,2, HU Minghui¹, TU Shandong¹, SHAO Huihe³

1 Key Laboratory of Pressure Systems and Safety of Ministry of Education, East China University of Science and Technology, Shanghai 200237, China;
2 Petro-China Jilin Petrochemical Company, Jilin 132021, China;
3 School of Electrionic, Information and Electrical Engineering, Shanghai Jiaotong University, Shanghai 200240, China

Received:2013-04-12 Revised:2013-11-05 Online:2013-12-28 Published:2013-12-27
Supported by:
Supported by the National Natural Science Foundation of China (51205133), Natural Science Foundation of Shanghai (11ZR1409000), Ph.D. Programs Foundation of Ministry of Education of China (20110074120007).

摘要/Abstract

摘要： Based on frequency response and convex optimization, a novel optimal control system was developed for chemical processes. The feedforward control is designed to improve the tracking performance of closed loop chemical systems. The parametric model is not required because the system directly utilizes the frequency response of the loop transfer function, which can be measured accurately. In particular, the extremal values of magnitude and phase can be solved according to constrained quadratic programming optimizer and convex optimization. Simulation examples show the effectiveness of the method. The design method is simple and easily adopted in chemical industry.

关键词: control system, frequency response, convex optimization, chemical processes

Abstract: Based on frequency response and convex optimization, a novel optimal control system was developed for chemical processes. The feedforward control is designed to improve the tracking performance of closed loop chemical systems. The parametric model is not required because the system directly utilizes the frequency response of the loop transfer function, which can be measured accurately. In particular, the extremal values of magnitude and phase can be solved according to constrained quadratic programming optimizer and convex optimization. Simulation examples show the effectiveness of the method. The design method is simple and easily adopted in chemical industry.

Key words: control system, frequency response, convex optimization, chemical processes

丛二丁, 胡明慧, 涂善东, 邵惠鹤. A New Optimal Control System Design for Chemical Processes[J]. Chinese Journal of Chemical Engineering, 2013, 21(12): 1341-1346.

CONG Erding, HU Minghui, TU Shandong, SHAO Huihe. A New Optimal Control System Design for Chemical Processes[J]. Chin.J.Chem.Eng., 2013, 21(12): 1341-1346.

参考文献

1 Miranda, M., Reneaume, J.M., Meyer, X., Meyer, M., Szigeti., F., “Integrating process design and control: An application of optimal control to chemical processes”, Chem. Eng. Proce., 47 (11), 2004-2018 (2008).
2 Logist, F., van Erdeghem, P.M.M., van Impe, J.F., “Efficient deterministic multiple objective optimal control of (bio)chemical processes”, Chem. Eng. Sci., 64 (11), 2527-2538 (2009).
3 Wozny, G., Garcia, A.H., “Special issue on process optimization and control in chemical engineering and processing”, Chem. Eng. Proce., 46 (11), 1041-1042 (2007).
4 Verboven, P., Guillaume, P., Cauberghe, B., “Multivariable frequency response curve fitting with application to model parameter estimation”, Automatica, 41 (8), 1173-1782 (2005).
5 Sun, F., Du, W., Qi, R., Qian, F., Zhong, W., “A hybrid improved genetic algorithm and its application in dynamic optimization problems of chemical processes”, Chin. J Chem. Eng., 21 (2), 144-154 (2013).
6 Tavazoei, M.S., “Overshoot in the step response of fractional-order control systems”, J Process Control, 22 (1), 90-94 (2012).
7 Tomizuka, M., “Zero phase error tracking algorithm for digital control”, ASME J. Dynamic Syst. Meas. Control, 109 (1), 65-68 (1987).
8 Carrasco, D.S., Goodwin, G.C., “Feedforward model predictive control”, Annu. Rev. Control, 35 (2), 199-206 (2011).
9 Piccagli, S., Visioli, A., “An optimal feedforward control design for the set-point following of MIMO processes”, J Process Control, 19 (6), 978-984 (2009).
10 Pawlowski, A., Guzmán, J.L., Normey-Rico, J.E., Berenguel. M., “Improving feedforward disturbance compensation capabilities in generalized predictive control”, J Process Control, 22 (3), 527-539 (2012).
11 Chung, C.H., Chen, M.S., “A robust adaptive feedforward control in repetitive control design for linear systems”, Automatica, 48 (1), 183-190 (2012).
12 Upreti, S.R., “A new robust technique for optimal control of chemical engineering processes”, Comput. Chem. Eng., 28 (8), 1325-1336 (2004).
13 Mizumoto, I., Ikeda, D., Hirahata, T., Iwai, Z., “Design of discrete time adaptive PID control systems with parallel feedforward compensator”, Control Eng Pract., 18 (2), 168-176 (2010).
14 Ingimundarson, A., Hägglund, T., “Performance comparison between PID and dead-time compensating controllers”, J Process Control, 12 (8), 887-895 (2002).
15 Piccagli, S., Visioli, A., Khalate, A.A., Bombois, X., Babu?ka, R., Wijshoff, H., Waarsing, R., “Performance improvement of a drop-on-demand inkjet printhead using an optimization-based feedforward control method”, Control Eng Pract., 19 (8), 771-781 (2011).
16 Escobar, M., Trierweiler, J.O., “Multivariable PID controller design for chemical processes by frequency response approximation”, Chem. Eng. Sci., 88 (25), 1-15 (2013).
17 Chen, J., Gu, G.X., “Control oriented system identification: An H_∞ approach”, Int. J. Robust Nonlinear Control., 13, 497-498 (2003).
18 Franklin, G.F., Powell, J.D., Emami-Naeini, A., “Feedback Control of Dynamics Systems”, 3rd ed. Reading, MA: Addison-Wesley (1994).
19 Skogestad, S., Postlethwaite, I., Multivariable Feedback Control, Wiley, New York (1996).
20 Zhou, K., Essentials of Robust Control, Prentice-Hall, Englewood Cliffs, NJ (1998).
21 Oppenheim, V., Schafer, R.W., Discrete-time Signal Processing, Prentice-Hall, Englewood Cliffs, NJ (1998).
22 Tsai, K.Y., Hindi, H.A., “DQIT: μ-synthesis without D-scale fitting”, In: Proc. Amer. Control Conf., Anchorage, AK, 493-498 (2002).
23 Karimi, A., Khatibi, H., Longchamp. R., “Robust control of polytopic systems by convex optimization”, Automatica, 43 (8), 1395-1402 (2007).
24 Bhattacharyya, S.P., Chapellat, H., Keel, L.H., Robust Control: The Parametric Approach, Prentice Hall PTR, Upper Saddle River, NJ (1995).
25 Piazzi, A., Visioli, A., “Optimal noncausal set-point regulation of scalar systems”, Automatica, 37 (1), 121-127 (2001).
26 Wang, Y.G., Shao, H.H., “Optimal tuning for PI controller”, Automatica, 36 (1), 147-152 (2000).

[1]	Xiongzhuo Zhu, Dali Gao, Chong Yang, Chunjie Yang. A blast furnace fault monitoring algorithm with low false alarm rate: Ensemble of greedy dynamic principal component analysis-Gaussian mixture model[J]. 中国化学工程学报, 2023, 57(5): 151-161.
[2]	Qingming Ma, Jianhong Xu. Green microfluidics in microchemical engineering for carbon neutrality[J]. 中国化学工程学报, 2023, 53(1): 332-345.
[3]	Minjie Shi, Hangtian Zhu, Cheng Yang, Jing Xu, Chao Yan. Chemical reduction-induced fabrication of graphene hybrid fibers for energy-dense wire-shaped supercapacitors[J]. 中国化学工程学报, 2022, 47(7): 1-10.
[4]	Ruoshi Qin, Jinsong Zhao. Adaptive multiscale convolutional neural network model for chemical process fault diagnosis[J]. 中国化学工程学报, 2022, 50(10): 398-411.
[5]	Yuyang Kang, Yiqing Luo, Xigang Yuan. Recent progress on equation-oriented optimization of complex chemical processes[J]. 中国化学工程学报, 2022, 41(1): 162-169.
[6]	Kaixun He, Kai Wang, Yayun Yan. Active training sample selection and updating strategy for near-infrared model with an industrial application[J]. 中国化学工程学报, 2019, 27(11): 2749-2758.
[7]	Shengkun Jia, Xing Qian, Xigang Yuan, Sigurd Skogestad. Control structure comparison for three-product Petlyuk column[J]. Chinese Journal of Chemical Engineering, 2018, 26(8): 1621-1630.
[8]	Yongming Han, Zhiqiang Geng, Qunxiong Zhu, Xiaoyong Lin. Energy consumption hierarchical analysis based on interpretative structural model for ethylene production[J]. Chinese Journal of Chemical Engineering, 2015, 23(12): 2029-2036.
[9]	Cong Zhang, Hao Ye. Consistency and Asymptotic Property of a Weighted Least Squares Method for Networked Control Systems[J]. , 2014, 22(7): 754-761.
[10]	孙帆, 钟伟民, 程辉, 钱锋 . Novel Control Vector Parameterization Method with Differential Evolution Algorithm and Its Application in Dynamic Optimization of Chemical Processes[J]. Chinese Journal of Chemical Engineering, 2013, 21(1): 64-71.
[11]	赵涛岩, 李平, 曹江涛. Study of Interval Type-2 Fuzzy Controller for the Twin-tank Water Level System^*[J]. Chinese Journal of Chemical Engineering, 2012, 20(6): 1102-1106.
[12]	赵宇, 苏宏业, 褚健, 古勇. Multivariable Control Performance Assessment Based on Generalized Minimum Variance Benchmark[J]. , 2010, 18(1): 86-94.
[13]	Ahmmed S. Ibrehem, Mohamed Azlan Hussain, Nayef M. Ghasem. Mathematical Model and Advanced Control for Gas-phase Olefin Polymerization in Fluidized-bed Catalytic Reactors[J]. , 2008, 16(1): 84-89.

A New Optimal Control System Design for Chemical Processes

A New Optimal Control System Design for Chemical Processes

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 13

编辑推荐

Metrics

本文评价