Impact of polydimethylsiloxanes on physicochemical and tribological properties of naphthenic mineral oil (KN 4010)-based titanium complex grease

doi:10.1016/j.cjche.2018.09.002

中国化学工程学报 ›› 2019, Vol. 27 ›› Issue (4): 944-948.DOI: 10.1016/j.cjche.2018.09.002

• Materials and Product Engineering • 上一篇下一篇

Impact of polydimethylsiloxanes on physicochemical and tribological properties of naphthenic mineral oil (KN 4010)-based titanium complex grease

Jitai Li, Chu Zhai, Hengbo Yin, Aili Wang, Lingqin Shen

Faculty of Chemistry and Chemical Engineering, Jiangsu University, Zhenjiang 212013, China

收稿日期:2018-06-15 修回日期:2018-08-21 出版日期:2019-04-28 发布日期:2019-06-14
通讯作者: Hengbo Yin
基金资助:
Supported by the National Natural Science Foundation of China (21506078, 21506082) and China Postdoctoral Science Foundation (2016M591786, 2016M601739).

Impact of polydimethylsiloxanes on physicochemical and tribological properties of naphthenic mineral oil (KN 4010)-based titanium complex grease

Jitai Li, Chu Zhai, Hengbo Yin, Aili Wang, Lingqin Shen

Faculty of Chemistry and Chemical Engineering, Jiangsu University, Zhenjiang 212013, China

Received:2018-06-15 Revised:2018-08-21 Online:2019-04-28 Published:2019-06-14
Contact: Hengbo Yin
Supported by:
Supported by the National Natural Science Foundation of China (21506078, 21506082) and China Postdoctoral Science Foundation (2016M591786, 2016M601739).

摘要/Abstract

摘要： Titanium complex greases were prepared by using naphthenic mineral oil and polydimethylsiloxane as the mixed base oil. The effect of polydimethylsiloxane molecular weight and polydimethylsiloxane content in mixed base oil on the physicochemical and tribological properties of titanium complex greases was investigated. As compared to the sole mineral oil-based titanium complex grease, the use of polydimethylsiloxane (H201-350) as a co-base oil increased the dropping point from 310 to 329℃, decreased the oil separation from 3.7% to 2.3%, reduced the corrosion extent, and obviously improved the tribological properties. When the mixed oil-based titanium complex grease was used as a lubricant, lubricating films of polydimethylsiloxane were probably formed on the surfaces of friction pairs, giving good lubricating property.

关键词: Complexes, Surface, Polymers, Titanium complex grease, Polydimethylsiloxane, Tribological properties

Abstract: Titanium complex greases were prepared by using naphthenic mineral oil and polydimethylsiloxane as the mixed base oil. The effect of polydimethylsiloxane molecular weight and polydimethylsiloxane content in mixed base oil on the physicochemical and tribological properties of titanium complex greases was investigated. As compared to the sole mineral oil-based titanium complex grease, the use of polydimethylsiloxane (H201-350) as a co-base oil increased the dropping point from 310 to 329℃, decreased the oil separation from 3.7% to 2.3%, reduced the corrosion extent, and obviously improved the tribological properties. When the mixed oil-based titanium complex grease was used as a lubricant, lubricating films of polydimethylsiloxane were probably formed on the surfaces of friction pairs, giving good lubricating property.

Key words: Complexes, Surface, Polymers, Titanium complex grease, Polydimethylsiloxane, Tribological properties

Jitai Li, Chu Zhai, Hengbo Yin, Aili Wang, Lingqin Shen. Impact of polydimethylsiloxanes on physicochemical and tribological properties of naphthenic mineral oil (KN 4010)-based titanium complex grease[J]. 中国化学工程学报, 2019, 27(4): 944-948.

参考文献

[1] C. Lea, Energy savings through use of advanced biodegradable lubricants, Ind. Lubr. Tribol. 59(2007) 132-136.
[2] W.J. Bartz, Lubricants and the environment, Tribol. Int. 31(1998) 35-47.
[3] W.J. Bartz, Ecotribology:Environmentally acceptable tribological practices, Tribol. Int. 39(2006) 728-733.
[4] E.L. Plumer, Formulation, Characterization and Performance of Aluminum Complex Amino-acid Grease, NLGI Spokesman, 28, 1964142-145.
[5] R.J. Muir, High Performance Calcium Sulphonate Complex Lubricating Grease, NLGI Spokesman, 52, 1988140-146.
[6] W. Macwood, R.J. Muir, Calcium Sulphonate Grease, One Decade Later, NLGI Spokesman, 63, 199824-37.
[7] D. Liu, M. Zhang, G. Zhao, et al., Tribological behavior of amorphous and crystalline overbased calcium sulfonate as additives in lithium complex grease, Tribol. Lett. 45(2012) 265-273.
[8] M. Washo, Frictional Characteristics of Greased Rolling Contact Bearings, NLGI Spokesman, 57, 1994456-462.
[9] S. Okamura, M. Tyota, Long Life Urea Grease for High Temperature and High Speed Application, NLGI Spokesman, 56, 199294-100.
[10] J. Yin, J. Qu, B. Song, et al., Friction and wear behavior of titanium complex grease with admixture base oil, Key Eng. Mater. 419(2010) 57-60.
[11] X. Wu, G. Zhao, J. Liu, et al., Tribological properties of alkylphenyl diphosphates as high-performance antiwear additive in lithium complex grease and polyurea grease for steel/steel contacts at elevated temperature, Ind. Eng. Chem. Res. 53(2014) 5660-5667.
[12] J.E. Martin-Alfonso, G. Moreno, C. Valencia, Influence of soap/polymer concentration ratio on the rheological properties of lithium lubricating greases modified with virgin LDPE, J. Ind. Eng. Chem. 15(2009) 687-693.
[13] A. Kumar, B.D. Mittal, M.P. Singh, et al., Ecofriendly Titanium Complex Grease, NLGI Spokesman, 61, 199722-28.
[14] A. Kumar, E. Sayanna, A.S. Verma, et al., A New Generation High Performance Titanium Complex Grease, NLGI Spokesman, 58, 199425-30.
[15] A. Kumar, S.C. Nagar, B.D. Mittal, et al., Titanium Complex Grease for Girth Gear Applications, NLGI Spokesman, 63, 199915-19.
[16] A. Kumar, S.C. Nagar, K.P. Naithani, et al., Enhancing Further Performance Properties of Titanium Complex Grease, NLGI Spokesman, 62, 199820-27.
[17] V.J. Gatto, M.A. Grina, Effects of base oil type, oxidation test conditions and phenolic antioxidant structure on the detection and magnitude of hindered phenol/diphenylamine synergism, Lubr. Eng. 55(1999) 11-20.
[18] L. Yadgarov, V. Petrone, R. Rosentsveig, Tribological studies of rhenium doped fullerene-like MoS₂ nanoparticles in boundary, mixed and elasto-hydrodynamic lubrication conditions, Wear 297(2013) 1103-1110.
[19] A. Rothschild, J. Sloan, R. Tenne, Growth of WS₂ nanotubes phases, J. Am. Chem. Soc. 122(2000) 5169-5179.
[20] J. Chen, Tribological properties of polytetrafluoroethylene, nano-titanium dioxide, and nano-silicon dioxide as additives in mixed oil-based titanium complex grease, Tribol. Lett. 38(2010) 217-224.
[21] B.K. Sharma, A. Adhvaryu, J.M. Perez, et al., Soybean oil based greases:influence of composition on thermo-oxidative and tribochemical behavior, J. Agric. Food Chem. 53(2005) 2961-2968.
[22] J. Chen, Synthesis, characterization, and tribological behavior of neopentyl polyol ester-based and mixed oil-based titanium complex grease, Tribol. Lett. 40(2010) 149-154.
[23] G. Lai, S. Xing, Synthesis Process and Application of Organic Silicon Products, 2nd ed. Chemical industry press, Beijing, 2010(in Chinese).
[24] B. Helal, B.S. Karadi, Artificial lubrication of joints:Use of silicone oil, Ann. Phys. Med. 9(1968) 34-40.

Impact of polydimethylsiloxanes on physicochemical and tribological properties of naphthenic mineral oil (KN 4010)-based titanium complex grease

Impact of polydimethylsiloxanes on physicochemical and tribological properties of naphthenic mineral oil (KN 4010)-based titanium complex grease

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	Pan Wang, Mengdei Zhou, Zhuangxin Wei, Lu Liu, Tao Cheng, Xiaohua Tian, Jianming Pan. Preparation of bowl-shaped polydopamine surface imprinted polymer composite adsorbent for specific separation of 2′-deoxyadenosine[J]. 中国化学工程学报, 2023, 60(8): 69-79.
[2]	Peipei Ai, Huiqing Jin, Jie Li, Xiaodong Wang, Wei Huang. Ultra-stable Cu-based catalyst for dimethyl oxalate hydrogenation to ethylene glycol[J]. 中国化学工程学报, 2023, 60(8): 186-193.
[3]	Hui Jiang, Zijian Zhao, Ning Yu, Yi Qin, Zhengwei Luo, Wenhua Geng, Jianliang Zhu. Synthesis, characterization, and performance comparison of boron using adsorbents based on N-methyl-D-glucosamine[J]. 中国化学工程学报, 2023, 59(7): 16-31.
[4]	Haike Li, Xindong Li, Guozai Ouyang, Lang Li, Zhaohuang Zhong, Meng Cai, Wenhao Li, Wanfu Huang. Tannic acid/Fe³⁺ interlayer for preparation of high-permeability polyetherimide organic solvent nanofiltration membranes for organic solvent separation[J]. 中国化学工程学报, 2023, 57(5): 17-29.
[5]	Bin Lin, Wenyao Chen, Nan Song, Zhihua Zhang, Qianhong Wang, Wei Du, Xinggui Zhou, Xuezhi Duan. Mechanistic insights into propylene oxidation to acrolein over gold catalysts[J]. 中国化学工程学报, 2023, 57(5): 39-49.
[6]	Hui Yi Leong, Xiao-Qian Fu, Xiang-Yu Liu, Shan-Jing Yao, Dong-Qiang Lin. Characterisation and separation of infectious bursal disease virus-like particles using aqueous two-phase systems[J]. 中国化学工程学报, 2023, 57(5): 72-78.
[7]	Aneela Sabir, Wail Falath, Muhammad Shafiq, Nafisa Gull, Maria Wasim, Karl I. Jacob. Effective desalination and anti-biofouling performance via surface immobilized MWCNTs on RO membrane[J]. 中国化学工程学报, 2023, 56(4): 33-45.
[8]	Chen Chen, Yujie Liu, Qiong Tang, Hong Xu, Mingxing Tang, Xuekuan Li, Lei Liu, Jinxiang Dong. Tribological and rheological performance of lithium grease with poly-α-olefin and alkyl-tetralin as base oils[J]. 中国化学工程学报, 2023, 56(4): 180-192.
[9]	Taoyan Mao, Runhui Xiao, Peng Liu, Jiale Chen, Junqiang Luo, Su Luo, Fengwei Xie, Cheng Zheng. Facile fabrication of durable superhydrophobic fabrics by silicon polyurethane membrane for oil/water separation[J]. 中国化学工程学报, 2023, 55(3): 73-83.
[10]	Zhongqi Ren, Jie Wang, Hewei Zhang, Fan Zhang, Shichao Tian, Zhiyong Zhou. Adsorption of rubidium ion from aqueous solution by surface ion imprinted materials[J]. 中国化学工程学报, 2023, 54(2): 1-10.
[11]	Qingyue Han, Suqing Wang, Wenhan Kong, Bing Ji, Haihui Wang. Composite polymer electrolyte reinforced by graphitic carbon nitride nanosheets for room-temperature all-solid-state lithium batteries[J]. 中国化学工程学报, 2023, 54(2): 257-263.
[12]	Jiacheng Chen, Jincheng Wang, Shuhong Li, Kailing Xiang, Shiqiang Song. Pyridine terminated polyurethane dendrimer/chlorinated butyl rubber nanocomposites with excellent mechanical and damping properties[J]. 中国化学工程学报, 2023, 53(1): 211-221.
[13]	An Wang, Zhongyu Hou. Improving the energy efficiency of surface dielectric barrier discharge devices for plasma nitric oxide conversion utilizing active flow control[J]. 中国化学工程学报, 2023, 53(1): 270-279.
[14]	Luyao Guo, Mengru Wang, Ronghe Lin, Jiaxin Ma, Shuanghao Zheng, Xiaoling Mou, Jun Zhang, Zhong-Shuai Wu, Yunjie Ding. Assembly of N- and P-functionalized carbon nanostructures derived from precursor-defined ternary copolymers for high-capacity lithium-ion batteries[J]. 中国化学工程学报, 2023, 53(1): 280-288.
[15]	Lin-Bing Zou, Jue-Ying Gong, Xiao-Jie Ju, Zhuang Liu, Wei Wang, Rui Xie, Liang-Yin Chu. Smart membranes for biomedical applications[J]. 中国化学工程学报, 2022, 49(9): 34-45.