Conversion of Malaysian low-rank coal to mesoporous activated carbon: Structure characterization and adsorption properties

doi:10.1016/j.cjche.2018.12.006

摘要/Abstract

摘要： Malaysian Selantik low-rank coal (SC) was used as a precursor to prepare a form of mesoporous activated carbon (SC-AC) with greater surface area (SA) via a microwave induced KOH-activation method. The characteristics of the SC and SC-AC were evaluated by the iodine number, ash content, bulk density, and moisture content. The structure and surface characterization was carried out using pore structure analysis (BET), scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDX), X-ray diffraction (XRD), Fourier Transform Infrared (FTIR), elemental analysis (CHNS), thermogravimetric analysis (TGA), and determination of the point of zero charge (pH_PZC). These results signify a mesoporous structure of SC-AC with an increase of ca. 1160 times (BET SA=1094.3 m²·g^-1) as compared with raw SC without activation (BET SA=1.23 m²·g^-1). The adsorptive properties of the SC-AC with methylene blue (MB) was carried out at variable adsorbent dose (0.2-1.6 g·L^-1), solution pH (2-12), initial MB concentrations (25-400 mg·L^-1), and contact time (0-290 min) using batch mode operation. The kinetic profiles follow pseudo-second order kinetics and the equilibrium uptake of MB conforms to the Langmuir model with a maximum monolayer adsorption capacity of 491.7 mg·g^-1 at 303 K. Thermodynamic functions revealed a spontaneous endothermic adsorption process. The mechanism of adsorption included mainly electrostatic attractions, hydrogen bonding interaction, and π-π stacking interaction. This work shows that Malaysian Selantik low-rank coal is a promising precursor for the production of low-cost and efficient mesoporous activated carbon with substantive surface area.

关键词: Coal, Activated carbon, Mesoporous material, KOH activation, Microwave irradiation, Methylene blue

Abstract: Malaysian Selantik low-rank coal (SC) was used as a precursor to prepare a form of mesoporous activated carbon (SC-AC) with greater surface area (SA) via a microwave induced KOH-activation method. The characteristics of the SC and SC-AC were evaluated by the iodine number, ash content, bulk density, and moisture content. The structure and surface characterization was carried out using pore structure analysis (BET), scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDX), X-ray diffraction (XRD), Fourier Transform Infrared (FTIR), elemental analysis (CHNS), thermogravimetric analysis (TGA), and determination of the point of zero charge (pH_PZC). These results signify a mesoporous structure of SC-AC with an increase of ca. 1160 times (BET SA=1094.3 m²·g^-1) as compared with raw SC without activation (BET SA=1.23 m²·g^-1). The adsorptive properties of the SC-AC with methylene blue (MB) was carried out at variable adsorbent dose (0.2-1.6 g·L^-1), solution pH (2-12), initial MB concentrations (25-400 mg·L^-1), and contact time (0-290 min) using batch mode operation. The kinetic profiles follow pseudo-second order kinetics and the equilibrium uptake of MB conforms to the Langmuir model with a maximum monolayer adsorption capacity of 491.7 mg·g^-1 at 303 K. Thermodynamic functions revealed a spontaneous endothermic adsorption process. The mechanism of adsorption included mainly electrostatic attractions, hydrogen bonding interaction, and π-π stacking interaction. This work shows that Malaysian Selantik low-rank coal is a promising precursor for the production of low-cost and efficient mesoporous activated carbon with substantive surface area.

Key words: Coal, Activated carbon, Mesoporous material, KOH activation, Microwave irradiation, Methylene blue

Ali H. Jawad, Khudzir Ismail, Mohd Azlan Mohd Ishak, Lee D. Wilson. Conversion of Malaysian low-rank coal to mesoporous activated carbon: Structure characterization and adsorption properties[J]. 中国化学工程学报, 2019, 27(7): 1716-1727.

参考文献

[1] P. Patel, P. Christman, J. Gardner, Investigation of unexpectedly low fieldobserved fluid mobilities during some CO₂ tertiary floods, SPE Reserv. Eng. 2(04) (1987) 507-513.
[2] M. Sohrabi, M. Riazi, M. Jamiolahmady, S. Ireland, C. Brown, Mechanisms of oil recovery by carbonated water injection, in:SCA Annual Meeting, Noordwijk, 2009.
[3] M. Riazi, M. Sohrabi, M. Jamiolahmady, S. Ireland, C. Brown, Direct observation of CO₂ transport and oil displacement mechanisms in CO₂/water/oil systems, in:15th European Symposium on Improved Oil Recovery, France, 2009.
[4] M. Shakiba, S. Ayatollahi, M. Riazi, Investigation of oil recovery and CO₂ storage during secondary and tertiary injection of carbonated water in an Iranian carbonateoil reservoir, J. Pet. Sci. Eng. (2016) 134-143.
[5] M. Sohrabi, M. Riazi, M. Jamiolahmady, S. Ireland, C. Brown, Carbonated water injection for oil recovery and CO₂ storage, in:Sustainable Energy UK Conference:Meeting the Science and Engineering Challenge, Oxford, UK, 2008.
[6] M. Sohrabi, M. Riazi, M. Jamiolahmady, S. Ireland, C. Brown, Carbonated water injection (CWI) studies, in:29th Annual Workshop and Symposium, Iea Collaborative Project on Enhanced Oil Recovery, Beijing, China, 2008.
[7] Z. Duan, R. Sun, An improved model calculating CO₂ solubility in pure water and aqueous NaCl solutions from 273 to 533 K and from 0 to 200 MPa, Chem. Geol. 193(3) (2003) 257-271.
[8] Z. Duan, R. Sun, C. Zhu, M. Chou, An improved model for the calculation of CO₂ solubility in aqueous solutions containing Na⁺, K⁺, Ca²⁺, Mg²⁺, Cl, and SO₄2, Mar. Chem. 98(2) (2006) 131-139.
[9] United States Environmental Protection Agency Jan. Available from https://www.epa.gov/ghgemissions/overview-greenhouse-gases, 2018.
[10] M. Riazi, M. Sohrabi, M. Jamiolahmady, S. Ireland, C. Brown, Oil recovery improvement using CO₂-enriched water injection, in:EUROPEC/EAGE Conference and Exhibition. Society of Petroleum Engineers, Amsterdam, 2009.
[11] Y. Dong, B. Dindoruk, C. Ishizawa, E. Lewis, T. Kubicek, An experimental investigation of carbonated water flooding, in:Society of Petroleum Engineers Annual Technical Conference and Exhibition Held in Denver, Colorado, USA, 30 Oct.-2 November, 2011.
[12] L. Thibodeau, T. Guo, G.H. Neale, Effects of connate water on immiscible displacement processes in porous media, Powder Technol. 93(1997) 209-217.
[13] P.A. Dickey, R.B. Bossler, Role of connate water in secondary recovery of oil, Trans. AIME 155(1944) 175-183.
[14] D.L. Kelley, B.H. Caudle, The effect of connate water on the efficiency of highviscosity waterfloods, J. Pet. Technol. 18(1966) 1481-1486.
[15] P. Wylie, K. Mohanaty, Effect of Water Saturation on Oil Recovery by Nearmiscible Gas Injection, SPE Reservoir Engineering 12(1997) 264-268.
[16] L. Thibodeau, M. Sakanoko, G.H. Neale, Alkaline flooding processes in porous media in the presence of connate water, Powder Technol. 132(2003) 101-111.
[17] S.R. Etminan, B.B. Maini, R. Kharrat, The Role of Connate Water Saturation in VAPEX Process, Petroleum Society of Canada, Calgary, Alberta, 2007.
[18] S. Mohammadi, M. Masihi, M.H. Ghazanfari, Characterizing the role of shale geometry and connate water saturation on performance of polymer flooding in heavy oil reservoirs:Experimental observations and numerical simulations, Transp. Porous Media 91(3) (2012) 973-998.
[19] H. Födisch, J. Wegner, R. Hincapie, L. Ganzer, Impact of connate water replacement on chemical EOR processes, in:Society of Petroleum Engineers, Latin American and Caribbean Petroleum Engineering Conference held in Quito, Ecuador, 18-20 November, 2015.
[20] Y. Zhang, H.K. Sarma, Modelling of possible impact of reservoir brine salinity during CO₂ injection, in:SPE enhanced oil recovery conference, Society of Petroleum Engineers, Kuala Lumpur, 2013.
[21] Ahmed M. Shehata, Hisham A. Nasr-El-Din, Laboratory investigations to determine the effect of connate-water composition on low-salinity waterflooding in sand stone reservoirs, SPE Reservoir Evaluation 20(2017) 59-76.
[22] D. Tiab, E.C. Donaldson, Petrophysics:Theory and Practice of Measuring Reservoir Rock and Fluid Transport Properties, 4th Edition, Gulf professional publishing, USA, 2015.
[23] A. Sameni, P. Pourafshary, M. Ghanbarzadeh, S. Ayatollahi, Effect of nanoparticles on clay swelling and migration, Egypt. J. Pet. 24(2015) 429-437.
[24] R. Wiebe, The binary system carbon dioxide-water under pressure, Chem. Rev. 29(3) (1941) 475-481.
[25] Y.B. Chang, B.K. Coats, J.S. Nelon, A Compositional Model for CO₂ Floods Including CO₂ Solubility in Water, SPE, 1998.
[26] M. Riazi, Pore Scale Mechanisms of Carbonated Water Injection in Oil Reservoirs (PhD Thesis), Heriot-Watt University, Institute of Petroleum Engineering, England, 2011.
[27] H. Crawford, G.H. Neill, B.J. Bucy, P.B. Crawford, Carbon dioxide-a multipurpose additive for effective well stimulation, J. Pet. Technol. 15(03) (1963) 237-242.
[28] G. Donald, The Dissolution Effect of Carbonated Water on Oil Reservoir Carbonates-a Study under High Pressure Carbon Dioxide Flood Conditions (PhD Thesis), Heriot Watt university, Edinburgh, 1982.
[29] P. Mahzari, P. Tsolis, M. Sohrabi, S. Enezi, A.A. Yousef, A.A. Eidan, Carbonated water injection under reservoir conditions; in-situ WAG-type EOR, Fuel 217(2018) 285-296.
[30] M. Brownlee, L. Sugg, East vacuum Grayburg-San Andres unit CO₂ injection project:development and results to date, in:SPE Annual Technical Conference and Exhibition. Society of Petroleum Engineers, Texas, 1987.
[31] M. Abbaszadeh, M. Nasiri, M. Riazi, Experimental investigation of the impact of rock dissolution on carbonate rock properties in the presence of carbonated water, Environ. Earth Sci. 75(2016) 791-796.
[32] L. Rapoport, W. Leas, Properties of linear waterfloods, Trans. AIME 198(1953) (1953) 139-148.
[33] J.W. Martin, Additional oil production through flooding with carbonated water, Producers Monthly 15(1951) 18-22.
[34] Martin, J.W. and N.Y. Tuckahoe, Process of recovering oil from oil fields involving the use of critically carbonated water. U.S Patent (1959).
[35] C.N. Fredd, H.S. Fogler, Influence of transport and reaction on wormhole formation in porous media, AICHE J. 44(9) (1998) 1933-1949.
[36] Y. Hao, M. Smith, Y. Sholokhova, S. Carroll, CO₂-induced dissolution of low permeability carbonates. Part Ⅱ:Numerical modeling of experiments, Adv. Water Resour. 62(2013) 388-408.
[37] A. Hebach, A. Oberhof, N. Dahmen, Density of water + carbon dioxide at elevated pressures:Measurements and correlation, J. Chem. Eng. Data 49(4) (2004) 950-953.