An efficient nano-adsorbent via surfactants/dual surfactants assisted ultrasonic co-precipitation method for sono-removal of monoazo and diazo anionic dyes

doi:10.1016/j.cjche.2020.08.049

摘要/Abstract

摘要： To preserve the environment for civilization, we should remove the pollutants like toxic dyes by friendly and cost efficacious method. In this study, the effect of surfactants or mixed surfactants on physicochemical, optical and adsorption properties of ternary mixed oxide CeO₂-ZrO₂-Al₂O₃ (CZA) are investigated. The ternary mixed oxide CZA was prepared by surfactants or mixed surfactants assisted ultrasonic co-precipitation method. The physicochemical and optical properties are estimated by different techniques like XRD, TEM, EDX, FTIR, S_BET and UV–Vis/DR. The CZA_T and CZA_C have hybrid shapes and high surface area. The adsorption properties of ternary mixed oxides adsorbents were characterized by sono-removing anionic dyes such as Congo red (CR) and Remazol red RB-133 (RR). The different factors like contact time, different dye concentrations and temperatures also studied. The kinetics and isotherms applications showed that, the adsorption process was followed pseudo second order kinetics and the Freundlich isotherm model. Also, the adsorption is spontaneous and endothermic process through the thermodynamic study. Finally, the results showed that the ternary mixed oxide nano-adsorbent (CeO₂-ZrO₂-Al₂O₃₎ is promising and functional materials for anionic dye sweep from wastewater.

关键词: CeO₂-ZrO₂-Al₂O₃, Surfactants, Ultrasonic co-precipitation method, Optical properties, Wastewater, Adsorption

Abstract: To preserve the environment for civilization, we should remove the pollutants like toxic dyes by friendly and cost efficacious method. In this study, the effect of surfactants or mixed surfactants on physicochemical, optical and adsorption properties of ternary mixed oxide CeO₂-ZrO₂-Al₂O₃ (CZA) are investigated. The ternary mixed oxide CZA was prepared by surfactants or mixed surfactants assisted ultrasonic co-precipitation method. The physicochemical and optical properties are estimated by different techniques like XRD, TEM, EDX, FTIR, S_BET and UV–Vis/DR. The CZA_T and CZA_C have hybrid shapes and high surface area. The adsorption properties of ternary mixed oxides adsorbents were characterized by sono-removing anionic dyes such as Congo red (CR) and Remazol red RB-133 (RR). The different factors like contact time, different dye concentrations and temperatures also studied. The kinetics and isotherms applications showed that, the adsorption process was followed pseudo second order kinetics and the Freundlich isotherm model. Also, the adsorption is spontaneous and endothermic process through the thermodynamic study. Finally, the results showed that the ternary mixed oxide nano-adsorbent (CeO₂-ZrO₂-Al₂O₃₎ is promising and functional materials for anionic dye sweep from wastewater.

Key words: CeO₂-ZrO₂-Al₂O₃, Surfactants, Ultrasonic co-precipitation method, Optical properties, Wastewater, Adsorption

Marwa M. Ibrahim. An efficient nano-adsorbent via surfactants/dual surfactants assisted ultrasonic co-precipitation method for sono-removal of monoazo and diazo anionic dyes[J]. 中国化学工程学报, 2021, 40(12): 225-236.

参考文献

[1] A. K. Arora, V. S. Jaswal, K. Singh, R. Singh, Applications of metal/mixed metal oxides as photocatalyst: A Review, Orientj. Chem. 32 (2016) 2035-2042
[2] P. N. Kapoor, A. K. Bhagi, R. S. Mulukutla, K. J. Klabunde, Mixed metal oxide nanoparticles, Marcel Dekker, Inc. (2004)
[3] T. Dhanushkodi, S. J. Jeyakumar, I. K. Punithavathy, M. Jothibas, J. P. Richard, Effect of surfactant in the structural, morphological and optical properties of CeO₂ nanoparticles, Int. J. Adv. Scient. Technolo. 2 (2016) 92-95
[4] M. M. Ibrahim, S. A. El-Molla, S. A. Ismail, Influence of γ and ultrasonic irradiations on the physicochemical properties of CeO₂-Fe₂O₃-Al₂O₃ for textile dyes removal applications, J. Mol. Struct. 1158 (2018) 234-244
[5] M. M. Ibrahim, Photocatalytic activity of nanostructured ZnO-ZrO₂ binary oxide using fluorometric method, Spectrochim. Acta A145 (2015) 487–492
[6] V. Thakare, Progress in synthesis and applications of zirconia, Int. J. Eng. Res. Dev. 5 (2012) 25-28
[7] V. Claude, J. G. Mahy, F. Micheli, J. Geens, S. D. Lambert, Sol-gel Ni/γ-Al₂O₃ material as secondary catalyst for toluene reforming: Tailoring the γ-Al₂O₃ substrate with stearic acid, Microporous Mesoporous Mater. 291 (2020) 109681
[8] M. Wiśniewska, S. Chibowski, T. Urban, A. Nosal-Wiercińska, K. Terpiłowski, O. Goncharuk, Comparison of adsorption affinity of anionic polyacrylamide for nanostructured silica-titania mixed oxides, J. Mol. Liq. 258 (2018) 27–33
[9] S. Nath, A. Biswas, P. P. Kour, L. S. Sarma, U. K. Sur, B. G. Ankamwar, Synthesis of mesoporous nanocrystalline zirconia by surfactant-assisted hydrothermal approach, J. Nanosci. Nanotechnol. 18(2018)1–7
[10] D. Ramimoghadam, M. Z. B. Hussein, Y. H. T. Yap, The effect of sodium dodecyl sulfate (SDS) and cetyltrimethylammonium bromide (CTAB) on the properties of ZnO synthesized by hydrothermal method, Int. J. Mol. Sci. 13(2012) 13275-13293
[11] M. Bricha, Y. Belmamouni, E. Essassi, J. M. F. Ferreira, K. El Mabrouk, Surfactant-assisted hydrothermal synthesis of hydroxyapatite nanopowders, J. Nanosci. Nanotechnol. 12 (2012)1–8
[12] S. M. I. Morsy, Role of surfactants in nanotechnology and their applications, Int. J. Curr. Microbiol. App. Sci 3 (2014) 237-260
[13] A. Pourjavadi, A. A. Moghanaki, Ultrafast and efficient removal of cationic dyes using a magnetic nanocomposite based on functionalized cross-linked poly (methylacrylate), React. Funct. Polym.105 (2016) 95–102
[14] S. K. Brar, N. Wangoo, R. K. Sharma, Enhanced and selective adsorption of cationic dyes using novel biocompatible self-assembled peptide fibrils, J. Environ. Manage. 255 (2020) 109804
[15] M. Sharma, S. Hazra, S. Basu, Kinetic and isotherm studies on adsorption of toxic pollutants using porous ZnO@SiO₂ monolith, J. Colloid Interface Sci. 504 (2017) 669–679
[16] H. Shin, M. Baek, Y. Ro, C. Song, K.-Y. Lee, I. K. Song, Improvement of sulfur resistance of Pd/Ce–Zr–Al–O catalysts for CO oxidation, Appl. Surf. Sci. 429 (2018) 102–107
[17] H. Xu, S. Liu, Y. Wang, Q. Lin, C. Lin, L. Lan, Q. Wang, Y. Chen, Promotional effect of Al₂O₃ on WO₃/CeO₂-ZrO₂ monolithic catalyst for selective catalytic reduction of nitrogen oxides with ammonia after hydrothermal aging treatment, Appl. Surf. Sci. 427 (2018) 656–669
[18] A. J. de Abreu, A. F. Lucrédio, E. M. Assaf, Ni catalyst on mixed support of CeO₂-ZrO₂ and Al₂O₃: Effect of composition of CeO₂-ZrO₂ solid solution on the methane steam reforming reaction, Fuel Process. Technolo. 102 (2012) 140–145
[19] M. Dajiang, C. Yaoqiang, Z. Junbo, W. Zhenling, M. Di, G. Maochu, Catalytic partial oxidation of methane over Ni/CeO₂ - ZrO₂ - Al₂O₃, J. Rare Earths 25 (2007) 311-315
[20] Z. Ming, C. Shanhu, Z. Xiaoyu, G. Maochu, C. Yaoqiang, Performance of Pd/CeO₂-ZrO₂-Al₂O₃ catalyst for motorcycle, J. Rare Earths 27 (2009) 728-732
[21] T.O. Fufa, A.T. Mengesha, O. P. Yadav, Synthesis, characterization and photocatalytic activity of MnO₂/Al₂O₃/Fe₂O₃ nanocomposite for phenol degradation, Chem. Mater. Res. 7 (2014) 73-86
[22] R. D. Shannon, Revised effective ionic radii and systematic studies of interatomic distances in halides and chaleogenides, Acta Cryst. A32 (1976)751-767
[23] S. Shuaishuai, M. Dongsen, Y. Jun, Enhanced CO oxidation activity of CuO/CeO₂ catalyst prepared by surfactant-assisted impregnation method, J. Rare Earth 33(2015) 1268- 1274
[24] T. Thilagavathi, D. Geetha, Nano ZnO structures synthesized in presence of anionic and cationic surfactant under hydrothermal process, Appl. Nanosci. 4(2014) 127–132
[25] B. KC, S. N. Paudel, S. Rayamajhi, D. Karna, S. Adhikari, B. G. Shrestha, G. Bisht, Enhanced preferential cytotoxicity through surface modification: synthesis, characterization and comparative in vitro evaluation of TritonX-100 modified and unmodified zinc oxide nanoparticles in human breast cancer cell (MDA-MB-231), J. Chem. Cent. 10 (2016) 16- 25
[26] K. Castkova, A. Matousek, E. Bartonickova, J. C. Jr, P. Vanysek, J. Cihlar, Sintering of Ce, Sm, and Pr Oxide Nanorods, J. Am. Ceram. Soc. 99 (2016)1155–1163
[27] C. Pan, D. Zhang, L. Sh, CTAB assisted hydrothermal synthesis, controlled conversion and CO oxidation properties of CeO₂ nanoplates, nanotubes, and nanorods, J. Solid State Chem. 181 (2008) 1298–1306
[28] T. Yu, B. Lim, Y. Xia, Aqueous-phase synthesis of single-crystal ceria nanosheets, Angew. Chem. 122 (2010) 4586 –4589
[29] F. Rouquerol, J. Rouquerol, K. Sing, Adsorption by powders and porous solids: principles, methodology and application, Academic Press, London, 1999
[30] R. Pournajaf, S. A. Hassanzadeh-Tabrizi, M. Ghashang, Effect of surfactants on the synthesis of Al₂O₃-CeO₂ nanocomposite using a reverse microemulsion method, Ceram. Int. 40 (2014) 4933-4937
[31] S. Usharani, V. Rajendran, Synthesis and characterization of surfactant assisted CeO₂/ZrO₂ nanocomposite, Int. J. Pure Appl. Phys. 12(2016)53-60
[32] S. Jayakumar, P.V. Ananthapadmanabhan, K. Perumal, T.K. Thiyagarajan, S. C. Mishra, L. T. Su, A. I. Y. Tok, J. Guo, Characterization of nano-crystalline ZrO₂ synthesized via reactive plasma processing, Mater. Sci. Eng. B 176 (2011)894-899
[33] V. B. Mane, L.H. Mahind, K.D. Jadhav, S. A. Waghmode, S. P. Dagade, Structural characterization of nanosized Fe₂O₃-CeO₂ catalysts by XRD, EDX and TEM techniques, Carbon e Sci. Tech. 5/2 (2013) 260-264
[34] S. Gnanam, V. Rajendran, Influence of various surfactants on size, morphology, and optical properties of CeO₂ nanostructures via facile hydrothermal route, J. Nanoparticles 2013 (2013) 1-6
[35] X. Peng, D. Huang, T. Odoom-Wubah, D. Fu, J. Huang, Q. Qin, Adsorption of anionic and cationic dyes on ferromagnetic ordered mesoporous carbon from aqueous solution: equilibrium, thermodynamic and kinetics, J. Colloid Interface Sci. 430 (2014) 272-282
[36] T. Hu, Kinetics of azoreductase and assessment of toxicity of metabolic products from azo dye by Psudomonasluteola,Water Sci. Technol.43(2001) 261–269
[37] M. Y. Nassar, T. Y. Mohamed, I. S. Ahmed, I. Samir, MgO nanostructure via a solgel combustion synthesis method using different fuels: an efficient nanoadsorbent for the removal of some anionic textile dyes, J. Mol. Liq. 225(2017) 730-740
[38] M. Chairat, S. Rattanaphani, J.B. Bremner, V. Rattanaphani, An adsorption and kinetic study of lac dyeing on silk, Dyes Pigm. 64 (2005) 231-241
[39] J. Abdi, M. Vossoughi, N. M. Mahmoodi, I. Alemzadeh, Synthesis of amine modified zeolitic imidazolate framework-8, ultrasound-assisted dye removal and modeling, Ultrason. Sonochem. 39 (2017) 550-564
[40] M. M. Ibrahim, Cr₂O₃/Al₂O₃ as adsorbent: Physicochemical properties and adsorption behaviors towards removal of Congo red dye from water, J. Environ. Chem. Eng. 7 (2019) 102848
[41] E. Abdelkader, L. Nadjia, V. Rose-Noëlle, Adsorption of Congo red azo dye on nanosized SnO₂ derived from sol-gel method, Int. J. Ind. Chem. (2016) 53–70
[42] C. Lei, X. Zhu, Y. Le, B. Zhu, J. Yu, W. Ho, Hierarchically porous NiO–Al₂O₃ nanocomposite with enhanced Congo red adsorption in water, RSC Adv. (2016) 10272–10279
[43] H. S. Hafez, A. E. Ali, M. S. A. Abdel-Mottaleb, Photocatalytic efficiency of titanium dioxide immobilized on PVP/AAc hydrogel membranes: A comparative study for safe disposal of wastewater of Remazol Red RB-133 textile dye, Int. J. Photoenergy 7 (2005) 181-185
[44] M. Khairy, R. Kamal, N. H. Amin, M. A. Mousa, Kinetics and isotherm studies of remazol red adsorption onto polyaniline/cerium oxide nanocomposites, J. Basic Environ. Sci. 3 (2016) 123-132