An advanced ash fusion study on the melting behaviour of coal, oil shale and blends under gasification conditions using picture analysis and graphing method

doi:10.1016/j.cjche.2020.10.011

中国化学工程学报 ›› 2021, Vol. 32 ›› Issue (4): 393-407.DOI: 10.1016/j.cjche.2020.10.011

• Energy, Resources and Environmental Technology • 上一篇下一篇

An advanced ash fusion study on the melting behaviour of coal, oil shale and blends under gasification conditions using picture analysis and graphing method

Yang Meng¹, Peng Jiang², Yuxin Yan^1,2, Yuxin Pan¹, Xinyun Wu¹, Haitao Zhao³, Nusrat Sharmin¹, Edward Lester⁴, Tao Wu^1,2,5, Cheng Heng Pang^1,2,5

1 Department of Chemical and Environmental Engineering, The University of Nottingham Ningbo China, Ningbo 315100, China;
2 Ningbo New Materials Institute, The University of Nottingham, Ningbo 315042, China;
3 Department of Mechanical Engineering, Massachusetts Institute of Technology, Cambridge 02139, USA;
4 Department of Chemical and Environmental Engineering, The University of Nottingham, Nottingham NG7 2RD, UK;
5 Key Laboratory for Carbonaceous Wastes Processing and Process Intensification Research of Zhejiang Province, The University of Nottingham Ningbo China, Ningbo 315100, China

收稿日期:2020-02-16 修回日期:2020-09-26 出版日期:2021-04-28 发布日期:2021-06-19
通讯作者: Cheng Heng Pang
基金资助:
The authors gratefully express gratitude to all parties which have contributed towards the success of this project, both financially and technically, especially the S&T Innovation 2025 Major Special Programme (grant number 2018B10022) and the Ningbo Natural Science Foundation Programme (grant number 2018A610069) funded by the Ningbo Science and Technology Bureau, China, as well as the Industrial Technology Innovation and Industrialization of Science and Technology Project, China (grant number 2014A35001-2) and the UNNC FoSE Faculty Inspiration Grant, China. The Zhejiang Provincial Department of Science and Technology is also acknowledged for this research under its Provincial Key Laboratory Programme (2020E10018).

An advanced ash fusion study on the melting behaviour of coal, oil shale and blends under gasification conditions using picture analysis and graphing method

Yang Meng¹, Peng Jiang², Yuxin Yan^1,2, Yuxin Pan¹, Xinyun Wu¹, Haitao Zhao³, Nusrat Sharmin¹, Edward Lester⁴, Tao Wu^1,2,5, Cheng Heng Pang^1,2,5

1 Department of Chemical and Environmental Engineering, The University of Nottingham Ningbo China, Ningbo 315100, China;
2 Ningbo New Materials Institute, The University of Nottingham, Ningbo 315042, China;
3 Department of Mechanical Engineering, Massachusetts Institute of Technology, Cambridge 02139, USA;
4 Department of Chemical and Environmental Engineering, The University of Nottingham, Nottingham NG7 2RD, UK;
5 Key Laboratory for Carbonaceous Wastes Processing and Process Intensification Research of Zhejiang Province, The University of Nottingham Ningbo China, Ningbo 315100, China

Received:2020-02-16 Revised:2020-09-26 Online:2021-04-28 Published:2021-06-19
Contact: Cheng Heng Pang
Supported by:
The authors gratefully express gratitude to all parties which have contributed towards the success of this project, both financially and technically, especially the S&T Innovation 2025 Major Special Programme (grant number 2018B10022) and the Ningbo Natural Science Foundation Programme (grant number 2018A610069) funded by the Ningbo Science and Technology Bureau, China, as well as the Industrial Technology Innovation and Industrialization of Science and Technology Project, China (grant number 2014A35001-2) and the UNNC FoSE Faculty Inspiration Grant, China. The Zhejiang Provincial Department of Science and Technology is also acknowledged for this research under its Provincial Key Laboratory Programme (2020E10018).

摘要/Abstract

摘要： This study investigates the potential of solid fuel blending as an effective approach to manipulate ash melting behaviour to alleviate ash-related problems during gasification, thus improving design, operability and safety. The ash fusion characteristics of Qinghai bituminous coal together with Fushun, Xinghua and Laoheishan oil shales (and their respective blends) were quantified using a novel picture analysis and graphing method, which incorporates conventional ash fusion study, dilatometry and sintering strength test, in a CO/CO₂ atmosphere. This image-based characterisation method was used to monitor and quantify the complete melting behaviour of ash samples from room temperature to 1520℃. The impacts of blending on compositional changes during heating were determined experimentally via X-ray diffraction and validated computationally using FactSage. Results showed that the melting point of Qinghai coal ash to be the lowest at 1116℃, but would increase up to 1208℃, 1161℃ and 1160℃ with the addition of 30%-50% of Laoheishan, Fushun, and Xinghua oil shales, respectively. The formation of high-melting anorthite and mullite structures inhibits the formation of low-melting hercynite. However, the sintering point of Qinghai coal ash was seen to decrease from 1005℃ to 855℃, 834℃, and 819℃ in the same blends due to the formation of low-melting aluminosilicate. Results also showed that blending directly influences the sintering strength during the various stages of melting. The key finding from this study is that it is possible to mitigate against the severe ash slagging and fouling issue arising from high calcium and iron coals by co-gasification with a high silica-alumina oil shale. Moreover, blending coals with oil shales can also modify the ash melting behaviour of fuels to create the optimal ash chemistry that meets the design specification of the gasifier, without adversely affecting thermal performance.

关键词: Oil shale, Coal, Image-based ash fusion test, Co-gasification, Mineral transformation

Abstract: This study investigates the potential of solid fuel blending as an effective approach to manipulate ash melting behaviour to alleviate ash-related problems during gasification, thus improving design, operability and safety. The ash fusion characteristics of Qinghai bituminous coal together with Fushun, Xinghua and Laoheishan oil shales (and their respective blends) were quantified using a novel picture analysis and graphing method, which incorporates conventional ash fusion study, dilatometry and sintering strength test, in a CO/CO₂ atmosphere. This image-based characterisation method was used to monitor and quantify the complete melting behaviour of ash samples from room temperature to 1520℃. The impacts of blending on compositional changes during heating were determined experimentally via X-ray diffraction and validated computationally using FactSage. Results showed that the melting point of Qinghai coal ash to be the lowest at 1116℃, but would increase up to 1208℃, 1161℃ and 1160℃ with the addition of 30%-50% of Laoheishan, Fushun, and Xinghua oil shales, respectively. The formation of high-melting anorthite and mullite structures inhibits the formation of low-melting hercynite. However, the sintering point of Qinghai coal ash was seen to decrease from 1005℃ to 855℃, 834℃, and 819℃ in the same blends due to the formation of low-melting aluminosilicate. Results also showed that blending directly influences the sintering strength during the various stages of melting. The key finding from this study is that it is possible to mitigate against the severe ash slagging and fouling issue arising from high calcium and iron coals by co-gasification with a high silica-alumina oil shale. Moreover, blending coals with oil shales can also modify the ash melting behaviour of fuels to create the optimal ash chemistry that meets the design specification of the gasifier, without adversely affecting thermal performance.

Key words: Oil shale, Coal, Image-based ash fusion test, Co-gasification, Mineral transformation

Yang Meng, Peng Jiang, Yuxin Yan, Yuxin Pan, Xinyun Wu, Haitao Zhao, Nusrat Sharmin, Edward Lester, Tao Wu, Cheng Heng Pang. An advanced ash fusion study on the melting behaviour of coal, oil shale and blends under gasification conditions using picture analysis and graphing method[J]. 中国化学工程学报, 2021, 32(4): 393-407.

参考文献

[1] J. Cheng, F. Zhou, X. Xuan, J. Liu, J. Zhou, K. Cen, The catalytic effect of the Na and Ca-rich industrial wastes on the thermal ignition of coal combustion, Chin. J. Chem. Eng. 27(2019) 2467-2471.
[2] G. Guan, Clean coal technologies in Japan:a review, Chin. J. Chem. Eng. 25(2017) 689-697.
[3] P.A. Pichardo, S. Karagöz, T. Tsotsis, R. Ciora, V.I. Manousiouthakis, Technical economic analysis of an intensified Integrated Gasification Combined Cycle (IGCC) power plant featuring a sequence of membrane reactors, J. Membr. Sci. 579(2019) 266-282.
[4] Y.-S. Chen, Y.-P. Chyou, S.-C. Li, Hot gas clean-up technology of dust particulates with a moving granular bed filter, Appl. Therm. Eng. 74(2015) 146-155.
[5] C. He, X. Feng, K.H. Chu, A. Li, Y. Liu, Industrial-scale fixed-bed coal gasification:modeling, simulation and thermodynamic analysis, Chin. J. Chem. Eng. 22(2014) 522-530.
[6] C. Dai, F. Gu, Thermophoresis effects on gas-particle phases flow behaviors in entrained flow coal gasifier using Eulerian model, Chin. J. Chem. Eng. 25(2017) 712-721.
[7] V. Krishnamoorthy, S.V. Pisupati, A critical review of mineral matter related issues during gasification of coal in fixed, fluidized, and entrained flow gasifiers, Energies 8(2015) 10430-10463.
[8] J. Xu, Y. Yang, Y.-W. Li, Recent development in converting coal to clean fuels in China, Fuel 152(2015) 122-130.
[9] X. Qi, G. Song, S. Yang, Z. Yang, Q. Lyu, Exploration of effective bed material for use as slagging/agglomeration preventatives in circulating fluidized bed gasification of high-sodium lignite, Fuel 217(2018) 577-586.
[10] F. Li, Z. Li, J. Huang, Y. Fang, Understanding mineral behaviors during anthracite fluidized-bed gasification based on slag characteristics, Appl. Energy 131(2014) 279-287.
[11] C. Ma, Overview of Ash-Related Matters during Pressurised Entrained-Flow Gasification, Luleå Tekniska Universitet, Sweden, 2015,http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-166952.
[12] I. Ye, C. Ryu, J.H. Koo, Influence of critical viscosity and its temperature on the slag behavior on the wall of an entrained coal gasifier, Appl. Therm. Eng. 87(2015) 175-184.
[13] R.W. Bryers, Fireside slagging, fouling, and high-temperature corrosion of heat-transfer surface due to impurities in steam-raising fuels, Prog. Energy Combust. Sci. 22(1996) 29-120.
[14] S.A. Lolja, H. Haxhi, R. Dhimitri, S. Drushku, A. Malja, Correlation between ash fusion temperatures and chemical composition in Albanian coal ashes, Fuel 81(2002) 2257-2261.
[15] F. Li, H. Xiao, Y. Fang, Correlation between ash flow temperature and its ionic potentials under reducing atmosphere, Appl. Therm. Eng. 110(2017) 1007-1010.
[16] J.-H. Kim, G.-B. Kim, C.-H. Jeon, Prediction of correlation between ash fusion temperature of ASTM and Thermo-Mechanical Analysis, Appl. Therm. Eng. 125(2017) 1291-1299.
[17] V. Adell, C. Cheeseman, M. Ferraris, M. Salvo, F. Smeacetto, A. Boccaccini, Characterising the sintering behaviour of pulverised fuel ash using heating stage microscopy, Mater. Charact. 58(2007) 980-988.
[18] G. Dunnu, J. Maier, G. Scheffknecht, Ash fusibility and compositional data of solid recovered fuels, Fuel 89(2010) 1534-1540.
[19] C.H. Pang, B. Hewakandamby, T. Wu, E. Lester, An automated ash fusion test for characterisation of the behaviour of ashes from biomass and coal at elevated temperatures, Fuel 103(2013) 454-466.
[20] Z. Ge, L. Kong, J. Bai, H. Zhao, X. Cao, H. Li, Z. Bai, B. Meyer, S. Guhl, P. Li, Effect of CaO/Fe₂O₃ ratio on slag viscosity behavior under entrained flow gasification conditions, Fuel 258(2019) 116129.
[21] S. Wan]g, X. Wei, Z. Zong, Insight into the structural features of organic species in Fushun oil shale via thermal dissolution, Chin. J. Chem. Eng. 26(2018) 2162-2168.
[22] J. Han, Y. Sun, W. Guo, S. Deng, C. Hou, L. Qu, Q. Li, Non-isothermal thermogravimetric analysis of pyrolysis kinetics of four oil shales using Sestak-Berggren method, J. Therm. Anal. Calorim. 135(2019) 2287-2296.
[23] Y. Meng, L. Tang, Y. Yan, J. Oladejo, P. Jiang, T. Wu, C. Pang, Effects of microwave-enhanced pretreatment on oil shale milling performance, Energy Procedia 158(2019) 1712-1717.
[24] X. Jiang, X. Han, Z. Cui, New technology for the comprehensive utilization of Chinese oil shale resources, Energy 32(2007) 772-777.
[25] W. Qing, B. Jingru, S. Baizhong, S. Jian, Strategy of Huadian oil shale comprehensive utilization, Oil Shale 22(2005) 305.
[26] Y. Lu, Y. Wang, Y. Xu, Y. Li, W. Hao, Y. Zhang, Investigation of ash fusion characteristics and migration of sodium during co-combustion of Zhundong coal and oil shale, Appl. Therm. Eng. 121(2017) 224-233.
[27] M. Li, F. Li, Q. Liu, Y. Fang, H. Xiao, Regulation of ash fusibility for high ashfusion-temperature (AFT) coal by industrial sludge addition, Fuel 244(2019) 91-103.
[28] Y. Zhang, Q. Ren, H. Deng, Q. Lyu, Ash fusion properties and mineral transformation behavior of gasified semichar at high temperature under oxidizing atmosphere, Energy & Fuels 31(2017) 14228-14236.
[29] J. Li, X. Chen, Y. Liu, Q. Xiong, J. Zhao, Y. Fang, Effect of ash composition (Ca, Fe, and Ni) on petroleum coke ash fusibility, Energy & Fuels 31(2017) 6917-6927.
[30] J.M. Oladejo, S. Adegbite, C. Pang, H. Liu, E. Lester, T. Wu, In-situ monitoring of the transformation of ash upon heating and the prediction of ash fusion behaviour of coal/biomass blends, Energy 199(2020) 117330.
[31] T. Yamashita, P. Hayes, Analysis of XPS spectra of Fe²⁺ and Fe³⁺ ions in oxide materials, Appl. Surf. Sci. 254(2008) 2441-2449.
[32] B. Chehroudi, S. Danczyk, A novel distributed ignition method using singlewall carbon nanotubes (SWCNTs) and a low-power flash light, in:Global Powertrain Congress, World Powertrain Conference & Exposition, 2006, pp. 19-21.
[33] G.P. Huffman, F.E. Huggins, G.R. Dunmyre, Investigation of the hightemperature behaviour of coal ash in reducing and oxidizing atmospheres, Fuel 60(1981) 585-597.
[34] B.C. Folkedahl, H.H. Schobert, Effects of atmosphere on viscosity of selected bituminous and low-rank coal ash slags, Energy & Fuels 19(2005) 208-215.
[35] F. Li, Y. Fang, Modification of ash fusion behavior of lignite by the addition of different biomasses, Energy & Fuels 29(2015) 2979-2986.
[36] F. Li, Y. Fang, Ash fusion characteristics of a high aluminum coal and its modification, Energy & Fuels 30(2016) 2925-2931.
[37] B. Liu, Q. He, Z. Jiang, R. Xu, B. Hu, Relationship between coal ash composition and ash fusion temperatures, Fuel 105(2013) 293-300.
[38] T. Sasi, M. Mighani, E. Örs, R. Tawani, M. Gräbner, Prediction of ash fusion behavior from coal ash composition for entrained-flow gasification, Fuel Process. Technol. 176(2018) 64-75.
[39] Q.-A. Xiong, J. Li, S. Guo, G. Li, J. Zhao, Y. Fang, Ash fusion characteristics during co-gasification of biomass and petroleum coke, Bioresour. Technol. 257(2018) 1-6.
[40] X. Chen, J. Tang, X. Tian, L. Wang, Influence of biomass addition on Jincheng coal ash fusion temperatures, Fuel 160(2015) 614-620.
[41] Z. Liu, J. Li, M. Zhu, Q. Wang, X. Lu, Y. Zhang, Z. Zhang, D. Zhang, Investigation into scavenging of sodium and ash deposition characteristics during cocombustion of Zhundong lignite with an oil shale semi-coke of high aluminosilicate in a circulating fluidized bed, Fuel 257(2019) 116099.
[42] P.J. Daley, O. Williams, C. Heng Pang, T. Wu, E. Lester, The impact of ash pellet characteristics and pellet processing parameters on ash fusion behaviour, Fuel 251(2019) 779-788.
[43] Q. Zhu, Coal sampling and analysis standards, IEA Clean Coal Centre, London, United Kingdom, 2014.
[44] Y. Meng, Y. Yan, P. Jiang, M. Zhang, J. Oladejo, T. Wu, C.H. Pang, Investigation on breakage behaviour of oil shale with high grinding resistance:a comparison between microwave and conventional thermal processing, Chem. Eng. Process. 151(2020) 107909.
[45] International Organization for Standardization, Coal-Proximate analysis (ISO Standard No. 17246:2010), 2010, https://www.iso.org/standard/55946.html.
[46] International Organization for Standardization, Coal-Ultimate analysis (ISO Standard No. 17247:2013), 2013, https://www.iso.org/obp/ui/#iso:std:iso:17247:ed-2:v1:en.
[47] A. Majumder, R. Jain, P. Banerjee, J. Barnwal, Development of a new proximate analysis based correlation to predict calorific value of coal, Fuel 87(2008) 3077-3081.
[48] ASTM D1857/D1857M-18, Standard Test Method for Fusibility of Coal and Coke Ash, ASTM International, West Conshohocken, PA, 2018. https://www.astm.org.
[49] Z. Ma, X. Tian, H. Liao, Y. Guo, F. Cheng, Improvement of fly ash fusion characteristics by adding metallurgical slag at high temperature for production of continuous fiber, J. Clean. Prod. 171(2018) 464-481.
[50] L. Hanxu, N. Yoshihiko, D. Zhongbing, M. Zhang, Application of the FactSage to predict the ash melting behavior in reducing conditions, Chin. J. Chem. Eng. 14(2006) 784-789.
[51] M.J. Dirbeba, A. Brink, M. Zevenhoven, N. DeMartini, D. Lindberg, L. Hupa, M. Hupa, Characterization of vinasse for thermochemical conversion-fuel fractionation, release of inorganics, and ash-melting behavior, Energy & Fuels 33(7) (2019) 5840-5848.
[52] W.R. Niessen, Combustion and Incineration Processes:Applications in Environmental Engineering, CRC Press, Boca Raton, 2002.
[53] M. Seggiani, G. Pannocchia, Prediction of coal ash thermal properties using partial least-squares regression, Ind. Eng. Chem. Res. 42(2003) 4919-4926.
[54] G. Özbayoğlu, M.E. Özbayoğlu, A new approach for the prediction of ash fusion temperatures:A case study using Turkish lignites, Fuel 85(2006) 545-552.
[55] D. Schwitalla, M. Reinmöller, C. Forman, C. Wolfersdorf, M. Gootz, J. Bai, S. Guhl, M. Neuroth, B. Meyer, Ash and slag properties for co-gasification of sewage sludge and coal:An experimentally validated modeling approach, Fuel Process. Technol. 175(2018) 1-9.
[56] P. Teixeira, H. Lopes, I. Gulyurtlu, N. Lapa, P. Abelha, Evaluation of slagging and fouling tendency during biomass co-firing with coal in a fluidized bed, Biomass Bioenergy 39(2012) 192-203.
[57] M. Pronobis, Evaluation of the influence of biomass co-combustion on boiler furnace slagging by means of fusibility correlations, Biomass Bioenergy 28(2005) 375-383.
[58] K. Xiang-dong, T. Li-li, Z. Wei-min, C. Hui, Q. Feng, Effects of coal composition on performance of entrained-flow coal-water slurry gasifier, J. Zhejiang Univ. (Eng. Sci.) 47(2013) 1685-1689.
[59] S. Vargas, F.J. Frandsen, K. Dam-Johansen, Rheological properties of hightemperature melts of coal ashes and other silicates, Prog. Energy Combust. Sci. 27(2001) 237-429.
[60] W.-J. Shi, L.-X. Kong, J. Bai, J. Xu, W.-C. Li, Z.-Q. Bai, W. Li, Effect of CaO/Fe₂O₃ on fusion behaviors of coal ash at high temperatures, Fuel Process. Technol. 181(2018) 18-24.
[61] B.O. Mysen, D. Virgo, F.A. Seifert, Redox equilibria of iron in alkaline earth silicate melts:relationships between melt structure, oxygen fugacity, temperature and properties of iron-bearing silicate liquids, Am. Mineral. 69(1984) 834-847.
[62] S. Munir, W. Nimmo, B. Gibbs, Potential slagging and fouling problems associated with biomass-coal blends in coal-fired boilers, J. Pakistan Inst. Chem. Eng. 38(1) (2010) 26.
[63] P.Y. Hsieh, Sintering and collapse of synthetic coal ash and slag cones as observed through constant heating rate optical dilatometry, Fuel 235(2019) 567-576.
[64] P.J. Daley, O. Williams, C.H. Pang, T. Wu, E. Lester, The impact of ash pellet characteristics and pellet processing parameters on ash fusion behaviour, Fuel 251(2019) 779-788.
[65] A. Kosminski, D. Ross, J. Agnew, Reactions between sodium and silica during gasification of a low-rank coal, Fuel Process. Technol. 87(2006) 1037-1049.
[66] G. Song, W. Song, X. Qi, S. Yang, Sodium transformation characteristic of high sodium coal in circulating fluidized bed at different air equivalence ratios, Appl. Therm. Eng. 130(2018) 1199-1207.
[67] M.P. Skhonde, R.H. Matjie, J.R. Bunt, A.C. Strydom, H. Schobert, Sulfur behavior in the sasol-lurgi fixed-bed dry-bottom gasification process, Energy & Fuels 23(2008) 229-235.
[68] Q. Zhang, H. Liu, Y. Qian, M. Xu, W. Li, J. Xu, The influence of phosphorus on ash fusion temperature of sludge and coal, Fuel Process. Technol. 110(2013) 218-226.
[69] Z. Ma, J. Bai, Z. Bai, L. Kong, Z. Guo, J. Yan, W. Li, Mineral transformation in char and its effect on coal char gasification reactivity at high temperatures, part 2:char gasification, Energy & Fuels 28(2014) 1846-1853.
[70] M.F. Llorente, J.C. García, Comparing methods for predicting the sintering of biomass ash in combustion, Fuel 84(2005) 1893-1900.
[71] B. Zhang, Z. Shen, D. Han, Q. Liang, J. Xu, H. Liu, Effects of the bubbles in slag on slag flow and heat transfer in the membrane wall entrained-flow gasifier, Appl. Therm. Eng. 112(2017) 1178-1186.
[72] F. Valenza, R. Botter, P. Cirillo, F. Barberis, M. di Foggia, D. Sottile, Sintering of waste of superalloy casting investment shells as a fine aggregate for refractory tiles, Ceram. Int. 36(2010) 459-463.
[73] W. Feng, Y. Min, K. Haoyong, J. Kuang, L. Ping, J. Zhang, Y. Zhang, Effect of Al₂O₃/CaO on the melting and mineral transformation of Ningdong coal ash, Chin. J. Chem. Eng. 28(12) (2020) 3110-3116.
[74] M. Shen, K. Qiu, L. Zhang, Z. Huang, Z. Wang, J. Liu, Influence of coal blending on ash fusibility in reducing atmosphere, Energies 8(2015) 4735-4754.
[75] C. Tang, T. Zhu, L. Wang, L. Deng, D. Che, Y. Liu, Effects of ash parameters and fluxing agent on slag layer behavior in cyclone barrel, Fuel 253(2019) 1140-1148.
[76] X. Li, L. Zhi, C. He, L. Kong, J. Bai, S. Guhl, B. Meyer, W. Li, The factors on metallic iron crystallization from slag of direct coal liquefaction residue SiO₂-Al₂O₃-Fe₂O₃-CaO-MgO-TiO₂-Na₂O-K₂O system in the entrained flow gasification condition, Fuel 246(2019) 417-424.

An advanced ash fusion study on the melting behaviour of coal, oil shale and blends under gasification conditions using picture analysis and graphing method

An advanced ash fusion study on the melting behaviour of coal, oil shale and blends under gasification conditions using picture analysis and graphing method

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	Yuehua Liu, Lili Chen, Shoujun Liu, Song Yang, Ju Shangguan. Role of iron-based catalysts in reducing NO_x emissions from coal combustion[J]. 中国化学工程学报, 2023, 59(7): 1-8.
[2]	Jian Han, Xinhua Liu, Shanwei Hu, Nan Zhang, Jingjing Wang, Bin Liang. Optimization of decoupling combustion characteristics of coal briquettes and biomass pellets in household stoves[J]. 中国化学工程学报, 2023, 59(7): 182-192.
[3]	Jiangshan Qu, Jianbo Zhang, Huiquan Li, Shaopeng Li, Da Shi, Ruiqi Chang, Wenfen Wu, Ganyu Zhu, Chennian Yang, Chenye Wang. Occurrence, leaching behavior, and detoxification of heavy metal Cr in coal gasification slag[J]. 中国化学工程学报, 2023, 58(6): 11-19.
[4]	Wei Wang, Romain Lemaire, Ammar Bensakhria, Denis Luart. Thermogravimetric analysis and kinetic modeling of the co-pyrolysis of a bituminous coal and poplar wood[J]. 中国化学工程学报, 2023, 58(6): 53-68.
[5]	Shuangtai Liu, Lei He, Qiuxiang Yao, Xi Li, Linyang Wang, Jing Wang, Ming Sun, Xiaoxun Ma. Separation and analysis of six fractions in low temperature coal tar by column chromatography[J]. 中国化学工程学报, 2023, 58(6): 256-265.
[6]	Jian Wang, Yuanhui Shen, Donghui Zhang, Zhongli Tang, Wenbin Li. Integrated vacuum pressure swing adsorption and Rectisol process for CO₂ capture from underground coal gasification syngas[J]. 中国化学工程学报, 2023, 57(5): 265-279.
[7]	Jinchang Liu, Chenyang Shen, Lujie Huang, Tinghao Fang, Yaping Li, Dingcheng Liang, Qiang Xie. Preparation of pitch precursor with excellent spinnability for general-purpose carbon fibre using coal tar pitch as raw material[J]. 中国化学工程学报, 2023, 54(2): 22-28.
[8]	Linyang Wang, Qiang Wang, Yongqi Liu, Qiuxiang Yao, Ming Sun, Xiaoxun Ma. Catalytic conversion of asphaltenes to BTXN using metal-loaded modified HZSM-5[J]. 中国化学工程学报, 2022, 49(9): 253-264.
[9]	Kangcheng Wang, Jie Zhang, Dexian Huang. Online temperature estimation of Shell coal gasification process based on extended Kalman filter[J]. 中国化学工程学报, 2022, 47(7): 134-144.
[10]	Zhibin Ma, Xueli Zhang, Guangjun Lu, Yanxia Guo, Huiping Song, Fangqin Cheng. Hydrothermal synthesis of zeolitic material from circulating fluidized bed combustion fly ash for the highly efficient removal of lead from aqueous solution[J]. 中国化学工程学报, 2022, 47(7): 193-205.
[11]	Qilong Ge, Qi Tian, Sufang Wang, Fang Zhu. Synergistic effects of phosphoric acid modified hydrochar and coal gangue-based zeolite on bioavailability and accumulation of cadmium and lead in contaminated soil[J]. 中国化学工程学报, 2022, 46(6): 150-160.
[12]	Teng Wang, Zihong Xia, Caixia Chen. Computational study of bubble coalescence/break-up behaviors and bubble size distribution in a 3-D pressurized bubbling gas-solid fluidized bed of Geldart A particles[J]. 中国化学工程学报, 2022, 44(4): 485-496.
[13]	Baowen Wang, Zhongyuan Cai, Heyu Li, Yanchen Liang, Tao Jiang, Ning Ding, Haibo Zhao. Reaction characteristics investigation of CeO₂-enhanced CaSO₄ oxygen carrier with lignite[J]. 中国化学工程学报, 2022, 42(2): 319-328.
[14]	Zhen Liu, Haiquan An, Jiansheng Zhang. Discharge characteristics of coal and extraction residue from direct coal liquefaction in partial fluidization silo[J]. 中国化学工程学报, 2022, 52(12): 78-87.
[15]	Xiuli Zhang, Zhengdong Gao, Yongzhuo Liu, Yuanhao Hou, Xiaoqing Sun, Qingjie Guo. Experimental and mechanistic study on chemical looping combustion of caking coal[J]. 中国化学工程学报, 2021, 37(9): 89-96.