Experimental Investigation of Dust Deposit within Ceramic Filter Medium during Filtration-Cleaning Cycles

›› 2009, Vol. 17 ›› Issue (2): 219-225.

Experimental Investigation of Dust Deposit within Ceramic Filter Medium during Filtration-Cleaning Cycles

迟化昌^1,2, 姬忠礼¹, 孙冬梅¹, 崔立山¹

1. Department of Mechanical and Electrical Engineering, China University of Petroleum, Beijing 102249, China;
2. Department of Engineering and Construction, China National Oil & Gas Exploration and Development Corporation, Beijing 100034, China

收稿日期:2008-06-05 修回日期:2009-02-17 出版日期:2009-04-28 发布日期:2009-04-28
通讯作者: JI Zhongli,E-mail:jizhongli63@vip.sina.com
基金资助:
Supported by the Specialized Research Fund for the Doctoral Program of Higher Education of China (20040425007)

Experimental Investigation of Dust Deposit within Ceramic Filter Medium during Filtration-Cleaning Cycles

CHI Huachang^1,2, JI Zhongli¹, SUN Dongmei¹, CUI Lishan¹

1. Department of Mechanical and Electrical Engineering, China University of Petroleum, Beijing 102249, China;
2. Department of Engineering and Construction, China National Oil & Gas Exploration and Development Corporation, Beijing 100034, China

Received:2008-06-05 Revised:2009-02-17 Online:2009-04-28 Published:2009-04-28
Supported by:
Supported by the Specialized Research Fund for the Doctoral Program of Higher Education of China (20040425007)

摘要/Abstract

摘要： The penetration and deposit of particles within the medium is thought to be one reason that the residual pressure drop of the rigid ceramic filter increase with cycle number.In this study,the change in the microstructure of a single layer ceramic filter candle during filtration-cleaning cycle was observed by scanning electron microscope(SEM) and the resistance property of the filter was monitored accordingly.The experimental results show that there exists a serious dust deposit within the filter medium,especially at the surface region.This should be responsible for the decrease of the filter permeability.The deposit law of dust in the filter medium during filtration-cleaning cycle was then studied by measuring the deposit depth,the deposit amount,the particles distribution within the medium,the size distribution of deposited particles,and so on.Particles migration and fine particles penetration were found to be the main reasons,for which dust deposit within the filter medium became aggravated with cycle number.Based on a differential form of Ergun equation,an expression for the pressure drop of a used ceramic filter was developed with a good agreement with experimental results.Then,the effect of dust deposit on the residual pressure drop was studied at the different face velocities and dust sizes.It was found that face velocity and dust size significantly influence dust deposit within filter medium,and then the operation performance of the filter.

关键词: ceramic filter, microscopic analysis, resistance, dust deposit, scanning electron microscope

Abstract: The penetration and deposit of particles within the medium is thought to be one reason that the residual pressure drop of the rigid ceramic filter increase with cycle number.In this study,the change in the microstructure of a single layer ceramic filter candle during filtration-cleaning cycle was observed by scanning electron microscope(SEM) and the resistance property of the filter was monitored accordingly.The experimental results show that there exists a serious dust deposit within the filter medium,especially at the surface region.This should be responsible for the decrease of the filter permeability.The deposit law of dust in the filter medium during filtration-cleaning cycle was then studied by measuring the deposit depth,the deposit amount,the particles distribution within the medium,the size distribution of deposited particles,and so on.Particles migration and fine particles penetration were found to be the main reasons,for which dust deposit within the filter medium became aggravated with cycle number.Based on a differential form of Ergun equation,an expression for the pressure drop of a used ceramic filter was developed with a good agreement with experimental results.Then,the effect of dust deposit on the residual pressure drop was studied at the different face velocities and dust sizes.It was found that face velocity and dust size significantly influence dust deposit within filter medium,and then the operation performance of the filter.

Key words: ceramic filter, microscopic analysis, resistance, dust deposit, scanning electron microscope

迟化昌, 姬忠礼, 孙冬梅, 崔立山. Experimental Investigation of Dust Deposit within Ceramic Filter Medium during Filtration-Cleaning Cycles[J]. , 2009, 17(2): 219-225.

CHI Huachang, JI Zhongli, SUN Dongmei, CUI Lishan. Experimental Investigation of Dust Deposit within Ceramic Filter Medium during Filtration-Cleaning Cycles[J]. , 2009, 17(2): 219-225.

参考文献

1 Ji, Z.L., Shi, M.X., Ding, F.X., “Transient flow analysis of pulse-jet generating system in ceramic filter”, Powder Technol., 139, 200-207 (2004).
2 Seville, J.P.K., Chuah, T.G., Sibanda, V., Knight, P., “Gas cleaning at high temperatures using ceramic filters”, Adv. Powder Technol., 14 (6), 657-672 (2003).
3 Schildermans, I., Baeyens, J., “Pulse jet cleaning of rigid filters:A literature review and introduction to process modeling”, Filtr. Sep., 41 (5), 26-33 (2004).
4 Phillips, J.N., Dries, H.W.A., “Filtration of fly slag from the shell coal gasification process using porous ceramic candles”, In:Proceedings of the 2nd International Symposium on Gas Cleaning at High Temperatures, Guildford, UK (1993).
5 Burnard, G.K., Leitch, A.J., Stringer, J., Clark, R.K., Holbrow, P., “Operation and performance of the EPRI hot gas filter at Grimethorpe PFBC establishment:1987-1992”, In:Proceedings of the 2nd International Symposium on Gas Cleaning at High Temperatures, Guildford, UK (1993).
6 Jalovaara, J., Hippinen, I., Jahkola, A., “Experiences of a fibrous ceramic candle filer for hot gas cleaning on pressurized fluidized bed combustion”, In:Proceedings of the 2nd International Symposium on Gas Cleaning at High Temperatures, Guildford, UK (1993).
7 Choi, J.H., Seo, Y.G., Chung, J.W., “Experimental study on the nozzle effect of the pulse cleaning for the ceramic filter candle”, Powder Technol., 114, 129-135 (2001).
8 Chi, H.C., Yu, L., Choi, J.H., Ji, Z.L., “Optimization of nozzle design for pulse cleaning of ceramic filter”, Chin. J. Chem. Eng., 16 (2), 306-313 (2008).
9 Ji, Z.L., Peng, S., Tan, L.C., “Numerical analysis of flow field in ceramic filter during pulse cleaning”, Chin. J. Chem. Eng., 11 (6), 626-632 (2003).
10 Pastila, P., Helanti, V., Nikkil , A.P., M ntyl , T., “Environmental effects on microstructure and strength of SiC-based hot gas filters”, J. Eur. Ceram. Soc., 21, 1261-1268 (2001).
11 Alvin, M.A., “Characterization of ash and char formations in advanced high temperature particulate filtration systems”, Fuel Process. Technol., 44, 237-283 (1995).
12 Duo, W., Kirkby, N.F., Seville, J.P.K., Clift, R., “Patchy cleaning of rigid gas filters (I) A probabilistic model”, Chem. Eng. Sci., 52 (1), 141-151 (1997).
13 Dittler, A., Ferer, M.V., Mathur, P., Djuranovic, P., Kasper, G., Smith, D.H., “Patchy cleaning of rigid gas filters-transient regeneration phenomena comparison of modeling to experiment”, Powder Technol., 124, 55-66 (2002).
14 Ji, Z.L., Jiao, H.Q., Chen, H.H., “Image analysis on detachment process of dust cake on ceramic candle filter”, Chin. J. Chem. Eng., 13 (2), 178-186 (2005).
15 Chung, J.D., Hwang, T.W., Park, S.J., “Filtration and dust cake experiment by ceramic candle filter in high temperature conditions”, Korean J. Chem. Eng., 20 (6), 1118-1122 (2003).
16 Alvin, M.A., “Impact of char and ash fines on porous ceramic filter life”, Fuel Process. Technol., 56, 143-168 (1998).
17 Schmidt, E., L ffler, F., “Preparation of dust cakes for microscopic examination”, Powder Technol., 60, 173-177 (1990).
18 Schmidt, E., “Experimental investigation into the compression of dust cakes deposited on filter media”, Filtr. Sep., 32 (8), 789-793 (1995).
19 Aguiar, M.L., Coury, J.R., “Cake formation in fabric filtration of gases”, Ind. Eng. Chem. Res., 35, 3673-3679 (1996).
20 Ergun, S., “Fluid flow through packed columns”, Chem Eng. Prog., 48 (2), 89-94 (1952).
21 Carman, P.C., “Fluid flow through granular beds”, Trans. Inst. Chem. Eng., 15, 150-166 (1937).

[1]	Junyu Chen, Yu Yang, Yuzheng Pan, Yang You, Liwen Hu, Meilong Hu. Wear resistance performance of high entropy alloy–ceramic coating composites synthesized via a novel combined process[J]. 中国化学工程学报, 2023, 57(5): 202-213.
[2]	Lijian Shi, Yaping Zhang, Yujia Tong, Wenlong Ding, Weixing Li. Plant-inspired biomimetic hybrid PVDF membrane co-deposited by tea polyphenols and 3-amino-propyl-triethoxysilane for high-efficiency oil-in-water emulsion separation[J]. 中国化学工程学报, 2023, 53(1): 170-180.
[3]	Zhiwei Du, Jinxue Cheng, Qinglin Huang, Mingxing Chen, Changfa Xiao. Electrospinning organic solvent resistant preoxidized poly(acrylonitrile) nanofiber membrane and its properties[J]. 中国化学工程学报, 2023, 53(1): 289-299.
[4]	Lingrui Cui, Jun Xu, Mannian Ren, Tao Li, Dianhua Liu, Fahai Cao. Modification of FCC slurry oil and deoiled asphalt for making high-grade paving asphalt[J]. 中国化学工程学报, 2022, 44(4): 300-309.
[5]	Yujia Tong, Lukuan Huang, Weixing Li. CFD simulation of flow field and resistance in a 19-core tandem ceramic membrane module[J]. 中国化学工程学报, 2020, 28(3): 625-635.
[6]	Pongjet Promvonge, Sompol Skullong. Enhanced heat transfer in rectangular duct with punched winglets[J]. 中国化学工程学报, 2020, 28(3): 660-671.
[7]	Hao Yang, Jiemei Zhou, Zhaogen Wang, Xiansong Shi, Yong Wang. Selective swelling of polysulfone/poly(ethylene glycol) block copolymer towards fouling-resistant ultrafiltration membranes[J]. 中国化学工程学报, 2020, 28(1): 98-103.
[8]	Dong Li, Aiwu Zeng. Entransy dissipation analysis of interfacial convection enhancing gasliquid mass transfer process based on field synergy principle[J]. 中国化学工程学报, 2019, 27(8): 1777-1788.
[9]	Yingnan Hu, Aijing Lü, Mingyong Wang, Dong Wang, Junhao Liu, Zhi Wang, Xuzhong Gong. Electrochemical behaviors of anode materials and their performance for bauxite desulfurization[J]. 中国化学工程学报, 2019, 27(4): 802-810.
[10]	Runlin Han, Yongli Xie, Xufeng Ma. Crosslinked P84 copolyimide/MXene mixed matrix membrane with excellent solvent resistance and permselectivity[J]. 中国化学工程学报, 2019, 27(4): 877-883.
[11]	V. Elakkiya, R. Abhishekram, S. Sumathi. Copper doped nickel aluminate: Synthesis, characterisation, optical and colour properties[J]. 中国化学工程学报, 2019, 27(10): 2596-2605.
[12]	Feng Zhang, Xin Ren, He Huang, Jun Huang, Medak Sudhakar, Licheng Liu. High-performance phosphate supported on HZSM-5 catalyst for dehydration of glycerol to acrolein[J]. Chinese Journal of Chemical Engineering, 2018, 26(5): 1031-1040.
[13]	Meili Liu, Jiaqing Chen, Xiaolei Cai, Yanhe Han, Si Xiong. Oil-water pre-separation with a novel axial hydrocyclone[J]. Chinese Journal of Chemical Engineering, 2018, 26(1): 60-66.
[14]	Minhua Zhang, Baojuan Huang, Haoxi Jiang, Yifei Chen. Research progress in the SO₂ resistance of the catalysts for selective catalytic reduction of NO_x[J]. Chinese Journal of Chemical Engineering, 2017, 25(12): 1695-1705.
[15]	Xianzhu Huang, Jian Wu, Yudan Zhu, Yumeng Zhang, Xin Feng, Xiaohua Lu. Flow-resistance analysis of nano-confined fluids inspired from liquid nano-lubrication:A review[J]. Chinese Journal of Chemical Engineering, 2017, 25(11): 1552-1562.

Experimental Investigation of Dust Deposit within Ceramic Filter Medium during Filtration-Cleaning Cycles

Experimental Investigation of Dust Deposit within Ceramic Filter Medium during Filtration-Cleaning Cycles

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价