Design and Performance Analysis of Micro Proton Exchange Membrane Fuel Cells

›› 2009, Vol. 17 ›› Issue (2): 298-303.

Design and Performance Analysis of Micro Proton Exchange Membrane Fuel Cells

钟振忠, 陈俊勋, 彭荣贵

Department of Mechanical Engineering, National Chiao Tung University, Hsinchu 300, China

收稿日期:2008-09-29 修回日期:2008-11-27 出版日期:2009-04-28 发布日期:2009-04-28
通讯作者: ZHONG Zhenzhong,E-mail:chenchung.me93g@nctu.edu.tw
基金资助:
Supported by the National Science Council (NSC 97-2221-E-009-067)

Design and Performance Analysis of Micro Proton Exchange Membrane Fuel Cells

ZHONG Zhenzhong, CHEN Junxun, PENG Ronggui

Department of Mechanical Engineering, National Chiao Tung University, Hsinchu 300, China

Received:2008-09-29 Revised:2008-11-27 Online:2009-04-28 Published:2009-04-28
Supported by:
Supported by the National Science Council (NSC 97-2221-E-009-067)

摘要/Abstract

摘要： This study describes a novel micro proton exchange membrane fuel cell(PEMFC)(active area,2.5 cm²).The flow field plate is manufactured by applying micro-electromechanical systems(MEMS) technology to silicon substrates to etch flow channels without a gold-coating.Therefore,this investigation used MEMS technology for fabrication of a flow field plate and presents a novel fabrication procedure.Various operating parameters,such as fuel temperature and fuel stoichiometric flow rate,are tested to optimize micro PEMFC performance.A single micro PEMFC using MEMS technology reveals the ideal performance of the proposed fuel cell.The optimal power density approaches 232.75 mW·cm^-1 when the fuel cell is operated at ambient condition with humidified,heated fuel.

关键词: micro proton exchange membrane fuel cell, flow field plate, micro-electromechanical systems technology, silicon

Abstract: This study describes a novel micro proton exchange membrane fuel cell(PEMFC)(active area,2.5 cm²).The flow field plate is manufactured by applying micro-electromechanical systems(MEMS) technology to silicon substrates to etch flow channels without a gold-coating.Therefore,this investigation used MEMS technology for fabrication of a flow field plate and presents a novel fabrication procedure.Various operating parameters,such as fuel temperature and fuel stoichiometric flow rate,are tested to optimize micro PEMFC performance.A single micro PEMFC using MEMS technology reveals the ideal performance of the proposed fuel cell.The optimal power density approaches 232.75 mW·cm^-1 when the fuel cell is operated at ambient condition with humidified,heated fuel.

Key words: micro proton exchange membrane fuel cell, flow field plate, micro-electromechanical systems technology, silicon

钟振忠, 陈俊勋, 彭荣贵. Design and Performance Analysis of Micro Proton Exchange Membrane Fuel Cells[J]. , 2009, 17(2): 298-303.

ZHONG Zhenzhong, CHEN Junxun, PENG Ronggui. Design and Performance Analysis of Micro Proton Exchange Membrane Fuel Cells[J]. , 2009, 17(2): 298-303.

参考文献

1 Hu, M.R., Zhu, X.J., Gu, A.Z., “Simulation of the internal transport phenomena for PEM fuel cells with different modes of flow”, Chin. J. Chem. Eng., 12, 14-26 (2004).
2 Shao, Q.L., Wei, D., Gao, G.Y., Zhu, X.J., “Dynamic thermal model and temperature control of proton exchange membrane fuel cell stack”, Chin. J. Chem. Eng., 13, 218-224 (2005).
3 Zhang, S.S., Yu, H.M., Zhu, H., Hou, J.B., Yi, B.L., Ming, P.W., “Effects of freeze/thaw cycles and gas purging method on polymer electrolyte membrane fuel cells”, Chin. J. Chem. Eng., 14, 802-805 (2006).
4 Vielstich, W., Lamm, A., Gasteiger, H. A., Handbook of Fuel Cells, West Sussex, England (2003).
5 Lee, S.J., Cha, S.W., Liu, Y., O'Hayre, R., Prinz, F.B., “High power-density polymer-electrolyte fuel cells by microfabrication”, Electrochemical Society Proceedings (2000).
6 Hahn, R., Wagner, S., Schmitz, A., Reichl, H., “Development of a planar micro fuel cell with thin film and micro patterning technologies”, Journal of Power Sources, 131, 73-78 (2004).
7 Yohtaro, Y., “Application of MEMS technology to micro fuel cells”, Electrochimica Acta, 50, 663-666 (2004).
8 Hsieh, S.S., Kuo, J.K., Hwang, C.F., Tsai, H.H., “A novel design and microfabrication for a micro PEMFC”, Microsystem Technologies-micro-and Nanosystems-information Storage and Processing Systems, 10, 121-126 (2004).
9 Hsieh, S.S., Hwang, C.F., Kuo, J.K., Tsai, H.H., Yang, S.H., “SU-8 flow field plates for a micro PEMFC”, Journal of Solid State Electrochemistry, 9, 121-131 (2005).
10 Chan, S.H., Nguyen, N.T., Xia, Z., Wu, Z., “Development of a polymeric micro fuel cell containing laser-micromachined flow channels”, Journal of Micromechanics and Microengineering, 15, 231-236 (2005).
11 Cha, S.W., O'Hayre, R., Park, Y.I., Prinz, F.B., “Electrochemical impedance investigation of flooding in micro-flow channels for proton exchange membrane fuel cells”, Journal of Power Sources, 161, 138-142 (2006).
12 Kim, J.Y., Kwon, O.J., Hwang, S.M., Kang, M.S., Kim, J.J., “Development of a miniaturized polymer electrolyte membrane fuel cell with silicon separators”, Journal of Power Sources, 161, 432-436 (2006).
13 Hsieh, S.S., Yang, S.H., Feng, C.L., “Characterization of the operational parameters of a H₂/air micro PEMFC with different flow fields by impedance spectroscopy”, Journal of Power Sources, 162, 262-270 (2006).
14 Hsieh, S.S., Feng, C.L., Huang, C.F., “Development and performance analysis of a H₂/air micro PEM fuel cell stack”, Journal of Power Sources, 163, 440-449 (2006).
15 Xiao, Z., Yan, G., Feng, C., Chan, P.C.H., Hsing, I.M., “A silicon-based fuel cell micro power system using a microfabrication technique”, Journal of Micromechanics and Microengineering, 16, 2014-2020 (2006).
16 Lee, C.Y., Chuang, C.W., “A novel integration approach for combining the components to minimize a micro-fuel cell”, Journal of Power Sources, 172, 115-120 (2007).
17 Feng, C., Chan, P.C.H., Hsing, I.M., “Catalyzed microelectrode mediated by polypyrrole/nafion composite film for microfabricated fuel cell applications”, Electrochemistry Communications, 9, 89-93 (2007).
18 Seyfang, B.C., Kuhnke, M., Lippert, T., Scherer, G.G., Wokaum, A., “A novel, simplified micro-PEFC concept employing glassy carbon micro-structures”, Electrochemistry Communications, 9, 1958-1962 (2007).
19 Zhang, F.Y., Advani, S.G., Prasad, A.K., “Performance of a metallic gas diffusion layer for PEM fuel cells”, Journal of Power Sources, 176, 293-298 (2008).
20 Renaud, L., Malhaire, C., Kleimann, P., Barbier, D., Morin, P., “Theoretical and experimental studies of microflows in silicon microchannels”, Materials Science and Engineering C, 28, 910-917 (2008).

[1]	Feng Pan, Sugang Ma, Yu Ge, Chuanlin Fan, Qingshan Zhu. Fluidization thermal decomposition of sodium fluosilicate[J]. 中国化学工程学报, 2023, 57(5): 329-337.
[2]	Taoyan Mao, Runhui Xiao, Peng Liu, Jiale Chen, Junqiang Luo, Su Luo, Fengwei Xie, Cheng Zheng. Facile fabrication of durable superhydrophobic fabrics by silicon polyurethane membrane for oil/water separation[J]. 中国化学工程学报, 2023, 55(3): 73-83.
[3]	Tadele Daniel Mekuria, Lei Wang, Chunhong Zhang, Ming Yang, Qingtao Lv, Diaa Eldin Fouad. Synthesis and characterization of high strength polyimide/silicon nitride nanocomposites with enhanced thermal and hydrophobic properties[J]. 中国化学工程学报, 2021, 32(4): 446-453.
[4]	Huan Zhang, Shicheng Zhao, Zhong Xin, Chunlin Ye, Zhi Li, Jincheng Xia, Jiaorong Li. Mechanism of size effects of a filler on the wear behavior of ultrahigh molecular weight polyethylene[J]. 中国化学工程学报, 2020, 28(7): 1950-1963.
[5]	Golchehreh Bayat, Roozbeh Saghatchi, Jafar Azamat, Alireza Khataee. Separation of methane from different gas mixtures using modified silicon carbide nanosheet: Micro and macro scale numerical studies[J]. 中国化学工程学报, 2020, 28(5): 1268-1276.
[6]	Xinxin Li, Hebang Shi, Liqiang Zhang, Jingbo Chen, Pengpeng Lü. Novel synthesis of SiO_x/C composite as high-capacity lithium-ion battery anode from silica-carbon binary xerogel[J]. 中国化学工程学报, 2020, 28(2): 579-583.
[7]	Yuedong Zhou, Fengfu Li, Junwei Liu, Zhi Yun, Xia Gui. Pt-H₂SO₄/Zr-montmorillonite: An efficient catalyst for the polymerization of octamethylcy-clotetrasiloxane, polymethylhydrosiloxane and hexamethyldisiloxane to low-hydro silicone oil[J]. Chinese Journal of Chemical Engineering, 2017, 25(12): 1771-1776.
[8]	Maxime Guillerm, Annabelle Couvert, Abdeltif Amrane, Edith Norrant, Audrey Breton, Éric Dumont. Toluene degradation by a water/silicone oil mixture for the design of two phase partitioning bioreactors[J]. , 2017, 25(10): 1512-1518.
[9]	Maxime Guillerm, Annabelle Couvert, Abdeltif Amrane, Edith Norrant, Audrey Breton, Éric Dumont. Toluene degradation by a water/silicone oil mixture for the design of two phase partitioning bioreactors[J]. , 2017, 25(10): 1512-1518.
[10]	Shixing Cui, Zhi Yun, Xia Gui. Modification of methyl oleate for silicon-based biological lubricating base oil[J]. , 2017, 25(1): 130-136.
[11]	Peilong Li, Tiefeng Wang. Thermodynamic analysis of manufacturing polysilicon from SiHCl₃, SiCl₄ and H₂[J]. Chinese Journal of Chemical Engineering, 2015, 23(4): 681-688.
[12]	Yanqing Hou, Zhifeng Nie, Gang Xie, Rongxing Li, Xiaohua Yu, Plant A. Ramachandran. Thermodynamic behaviors of SiCl₂ in silicon deposition by gas phase zinc reduction of silicon tetrachloride[J]. , 2015, 23(3): 552-558.
[13]	郭强, 王涛. Preparation and Characterization of Sodium Sulfate/Silica Composite as a Shape-stabilized Phase Change Material by Sol-gel Method[J]. Chinese Journal of Chemical Engineering, 2014, 22(3): 360-364.
[14]	卢振西, 张伟刚. Hydrogenation of Silicon Tetrachloride in Microwave Plasma[J]. Chinese Journal of Chemical Engineering, 2014, 22(2): 227-233.
[15]	丁川, 范毓润. Measurement of Diffusion Coefficients of Air in Silicone Oil and in Hydraulic Oil[J]. , 2011, 19(2): 205-211.

Design and Performance Analysis of Micro Proton Exchange Membrane Fuel Cells

Design and Performance Analysis of Micro Proton Exchange Membrane Fuel Cells

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价