SCI和EI收录∣中国化工学会会刊

›› 2009, Vol. 17 ›› Issue (5): 869-874.

• • 上一篇    下一篇

Oxidative Desulfurization of Non-hydrotreated Kerosene Using Hydrogen Peroxide and Acetic Acid

Asghar Molaei Dehkordi, Mohammad Amin Sobati, Mohammad Ali Nazem   

  1. Department of Chemical and Petroleum Engineering, Sharif University of Technology, Tehran, Iran
  • 收稿日期:2009-05-05 修回日期:2009-08-27 出版日期:2009-10-28 发布日期:2009-10-28
  • 通讯作者: Asghar Molaei Dehkordi,E-mail:amolaeid@sharif.edu
  • 基金资助:
    Supported by the R&D center of Esfahan refinery (Esfahan,Iran);the technical supports of central laboratory of Esfahan Refinery for total sulfur analysis

Oxidative Desulfurization of Non-hydrotreated Kerosene Using Hydrogen Peroxide and Acetic Acid

Asghar Molaei Dehkordi, Mohammad Amin Sobati, Mohammad Ali Nazem   

  1. Department of Chemical and Petroleum Engineering, Sharif University of Technology, Tehran, Iran
  • Received:2009-05-05 Revised:2009-08-27 Online:2009-10-28 Published:2009-10-28
  • Supported by:
    Supported by the R&D center of Esfahan refinery (Esfahan,Iran);the technical supports of central laboratory of Esfahan Refinery for total sulfur analysis

摘要: The oxidative desulfurization of a real refinery feedstock (i.e.,non-hydrotreated kerosene with total sulfur mass content of 0.16%) with a mixture of hydrogen peroxide and acetic acid was studied.The influences of various operating parameters including reaction temperature (T),acid to sulfur molar ratio (nacid/nS),and oxidant to sulfur molar ratio (nO/nS) on the sulfur removal of kerosene were investigated.The results revealed that an increase in the reaction temperature (T) and nacid/nS enhances the sulfur removal.Moreover,there is an optimum nO/nS related to the reaction temperature and the best sulfur removal could be obtained at nO/nS=8 and 23 for the reaction temperatures of 25 and 60℃,respectively.The maximum observed sulfur removal in the present oxidative desulfurization system was 83.3%.

关键词: oxidative desulfurization, kerosene, hydrogen peroxide, acetic acid, oxidation, extraction

Abstract: The oxidative desulfurization of a real refinery feedstock (i.e.,non-hydrotreated kerosene with total sulfur mass content of 0.16%) with a mixture of hydrogen peroxide and acetic acid was studied.The influences of various operating parameters including reaction temperature (T),acid to sulfur molar ratio (nacid/nS),and oxidant to sulfur molar ratio (nO/nS) on the sulfur removal of kerosene were investigated.The results revealed that an increase in the reaction temperature (T) and nacid/nS enhances the sulfur removal.Moreover,there is an optimum nO/nS related to the reaction temperature and the best sulfur removal could be obtained at nO/nS=8 and 23 for the reaction temperatures of 25 and 60℃,respectively.The maximum observed sulfur removal in the present oxidative desulfurization system was 83.3%.

Key words: oxidative desulfurization, kerosene, hydrogen peroxide, acetic acid, oxidation, extraction