Impacts of Power Density on Heavy Metal Release During Ultrasonic Sludge Treatment Process

doi:10.1016/S1004-9541(14)60062-8

Chinese Journal of Chemical Engineering ›› 2014, Vol. 22 ›› Issue (4): 469-473.DOI: 10.1016/S1004-9541(14)60062-8

• 催化、动力学与反应工程 • 上一篇下一篇

Impacts of Power Density on Heavy Metal Release During Ultrasonic Sludge Treatment Process

张光明¹, 万甜², 高峰², 董姗²

1 School of Environment & Natural Resource, Renmin University of China, Beijing 100872, China;
2 State Key Lab of Urban Water Resource and Environment, Harbin Institute of Technology, Harbin 150090, China

收稿日期:2012-08-25 修回日期:2013-01-25 出版日期:2014-04-28 发布日期:2014-04-04
通讯作者: ZHANG Guangming
基金资助:
Supported by the Basic Research Funds in Renmin University of China from the center government (12XNL101).

Impacts of Power Density on Heavy Metal Release During Ultrasonic Sludge Treatment Process

ZHANG Guangming¹, WAN Tian², GAO Feng², DONG Shan²

1 School of Environment & Natural Resource, Renmin University of China, Beijing 100872, China;
2 State Key Lab of Urban Water Resource and Environment, Harbin Institute of Technology, Harbin 150090, China

Received:2012-08-25 Revised:2013-01-25 Online:2014-04-28 Published:2014-04-04
Supported by:
Supported by the Basic Research Funds in Renmin University of China from the center government (12XNL101).

摘要/Abstract

摘要： The impact of ultrasonic power density on changes of heavy metals during sludge sonication was investigated. Results showed that ultrasound could release heavy metals from sludge into the supernatant. There existed an effective power density range of 0.8-1.6 W·ml^-1 for the release of the total heavy metal; there was little release below 0.8 W·ml^-1 and too high power density was adverse to the release. Furthermore, sonication showed selective release of heavy metal from sludge to the supernatant; copper, cadmium and lead were not released by sonication, while arsenic and nickel were released easily and their release ratio could reach 40%. The effective energy range for each heavy metal was also different that 0.8-1.2 W·ml^-1 for arsenic, 0.5-1.6 W·ml^-1 for nickel, and 0.8-1.6 W·ml^-1 for mercury and chrome. The differences among heavy metal release during sonication might be explained by the different distribution of chemical fractions of each metal in sludge. Such selectivity could be used to control heavy metal release during sludge treatment.

关键词: activated sludge, sonication, metals, power density, chemical fractions

Abstract: The impact of ultrasonic power density on changes of heavy metals during sludge sonication was investigated. Results showed that ultrasound could release heavy metals from sludge into the supernatant. There existed an effective power density range of 0.8-1.6 W·ml^-1 for the release of the total heavy metal; there was little release below 0.8 W·ml^-1 and too high power density was adverse to the release. Furthermore, sonication showed selective release of heavy metal from sludge to the supernatant; copper, cadmium and lead were not released by sonication, while arsenic and nickel were released easily and their release ratio could reach 40%. The effective energy range for each heavy metal was also different that 0.8-1.2 W·ml^-1 for arsenic, 0.5-1.6 W·ml^-1 for nickel, and 0.8-1.6 W·ml^-1 for mercury and chrome. The differences among heavy metal release during sonication might be explained by the different distribution of chemical fractions of each metal in sludge. Such selectivity could be used to control heavy metal release during sludge treatment.

Key words: activated sludge, sonication, metals, power density, chemical fractions

张光明, 万甜, 高峰, 董姗. Impacts of Power Density on Heavy Metal Release During Ultrasonic Sludge Treatment Process[J]. Chinese Journal of Chemical Engineering, 2014, 22(4): 469-473.

ZHANG Guangming, WAN Tian, GAO Feng, DONG Shan. Impacts of Power Density on Heavy Metal Release During Ultrasonic Sludge Treatment Process[J]. Chin.J.Chem.Eng., 2014, 22(4): 469-473.

参考文献

1 Brisolara, K.F., Qi, Y.N., "Biosolids and sludge management", Water Environ. Res., 82 (10), 1311-1326 (2010).

2 Mungray, A.K., Murthy, Z.V.P., Tirpude, A.J., "Post treatment of up-flow anaerobic sludge blanket based sewage treatment plant effluents: A review", Desal. Wat. Treat., 22 (1-3), 220-237 (2010).

3 Dogan, I., Sanin, F.D., "Alkaline solubilization and microwave irradiation as a combined sludge disintegration and minimization method", Water Res., 43, 2139-2148 (2009).

4 Bougrier, C., Albasi, C., Delgen鑣, J.P., Carr鑢e, H., "Effect of ultrasonic, thermal and ozone pretreatments on waste activated sludge solubilization and anaerobic biodegradability", Chem. Eng. Process., 45 (8), 711-718 (2006).

5 Erden, G., Filibeli, A., "Ultrasonic pre-treatment of biological sludge: consequences for disintegration, anaerobic biodegradability, and filterability", J. Chem. Technol. Biotechnol., 85, 145-150 (2010).

6 Na, S., Kim, Y.U., Khim, J., "Physiochemical properties of digested sewage sludge with ultrasonic treatment", Ultrason. Sonochem. 14 (3), 281-285 (2007).

7 Yoon, S., Kim, H., Lee, S., "Incorporation of ultrasonic cell disintegration into a membrane bioreactor for zero sludge production", Process Biochem., 39 (12), 1923-1929 (2004).

8 Wang, F., Lu, S., Ji, M., "Components of released liquid from ultrasonic waste activated sludge disintegration", Ultrason. Sonochem., 13, 334-338 (2006).

9 Zhang, G., Zhang, P., Yang, J., Chen, Y., "Ultrasonic reduction of excess sludge from the activated sludge system", J. Hazard. Mater., 145 (3), 515-519 (2007).

10 Muller, C.D., Abu-Orf, M., Blumenschein, C.D., Novak, J.T., "A comparative study of ultrasonic pretreatment and an internal recycle for the enhancement of mesophilic anaerobic digestion", Water Environ. Res., 81 (12), 2398-2410 (2009).

11 Laurent, J., Pierra, M., Casellas, M., Dagot, C., "The fate of heavy metals during thermal and ultrasound treatment of activated sludge", Environ. Prot. Eng., 35 (3), 5-15 (2009).

12 Sauvé, S., Hendershot, H., Allen, H.E., "Solid-solution partitioning of metals in contaminated soils: dependence on pH total metal burden and organic matter", Environ. Sci. Technol., 34 (7), 1125-1131 (2000).

13 Masood, F., Malik, A., "Biosorption of metal ions from aqueous solution and tannery effluent by Bacillus sp. FM1", J. Environ. Sci. Health. Part A: Toxic/Hazard. Subst. Environ. Eng., 46 (14), 1667-1674 (2011).

14 Zhang, G., Zhang, P., Yang, J., Liu, H., "Energy-efficient sludge sonication: Power and sludge characteristics", Bioresour. Technol., 99, 9029-9031 (2008).

15 Clesceri, L., Greenberg, A., Eaton, A., Standard Methods for the Examination of Water and Wastewater, 20th ed., American Public Health Association, Washington, D.C. (1998).

16 Dewil, R., Baeyens, J., Roelandt, F., Peereman, M., "The analysis of the total sulphur content of wastewater treatment sludge by ICP-OES", Environ. Sci. Tech., 23, 904-907 (2007).

17 Tessier, A., Compbell, P.G., Bisson, M., "Sequential extraction procedure for the speciation of particulate trace metals", Anal. Chem., 51 (7), 844-850 (1979).

18 Dewil, R., Baeyens, J., Goutvrind, R. "The use of ultrasonics in the treatment of waste activated sludge", Chin. J. Chem. Eng., 14 (1), 105-113 (2006).

19 Fuents, A., Llorens, M., Saez, J., Aguilar, M.I., Ortuno, J.F., Meseguer, V.F., "Comparative study of six different sludges by sequential speciation of heavy metals", Bioresour. Technol., 99, 517-525 (2008).

20 Zorpas, A.A., Inglezakis, V.J., Loizidou, M., "Heavy metals fractionation before, during and after composting of sewage sludge with natural zeolite", Waste Manage., 28, 2054-2060 (2008).

[1]	Chenyang Zhao, Yinhan Cheng, Guangfei Qu, Yongheng Yuan, Fenghui Wu, Ye Liu, Shan Liu, Junyan Li, Ping Ning. High-performance liquid-phase catalytic purification of phosphine in tail gas using Pd(II)/Cu(II) composite[J]. 中国化学工程学报, 2023, 57(5): 98-108.
[2]	Lanting Ke, Xiaobin Liu, Bingqing Du, Yuanpeng Wang, Yanmei Zheng, Qingbiao Li. Component analysis and risk assessment of biogas slurry from biogas plants[J]. 中国化学工程学报, 2022, 44(4): 182-191.
[3]	Hongbin Shi, Qing Liu, Xiaofeng Dai, Teng Zhang, Yuling Shi, Tao Wang. Magnetic graphene oxide-anchored Ni/Cu nanoparticles with a Cu-rich surface for transfer hydrogenation of nitroaromatics[J]. 中国化学工程学报, 2022, 50(10): 235-246.
[4]	Fangqi Mao, Peipei Hao, Yuquan Zhu, Xianggui Kong, Xue Duan. Layered double hydroxides: Scale production and application in soil remediation as super-stable mineralizer[J]. 中国化学工程学报, 2022, 41(1): 42-48.
[5]	Yubo Liu, Jialiang Zhang, Xu Yang, Wenguang Yang, Yongqiang Chen, Chengyan Wang. Efficient recovery of valuable metals from waste printed circuit boards by microwave pyrolysis[J]. 中国化学工程学报, 2021, 40(12): 262-268.
[6]	Saeideh Dermanaki Farahani, Javad Zolgharnein. Multivariate optimization of high removal of lead(II) using an efficient synthesized Ni-based metal-organic framework adsorbent[J]. 中国化学工程学报, 2021, 29(1): 146-153.
[7]	Haifeng Yu, Zhaofeng Yang, Huawei Zhu, Hao Jiang, Chunzhong Li. Nitrogen-doped carbon stabilized LiFe_0.5Mn_0.5PO₄/rGO cathode materials for high-power Li-ion batteries[J]. 中国化学工程学报, 2020, 28(7): 1935-1940.
[8]	Gang Xiao, Yaoqiang Wang, Shengnan Xu, Peifeng Li, Chen Yang, Yu Jin, Qiufeng Sun, Haijia Su. Superior adsorption performance of graphitic carbon nitride nanosheets for both cationic and anionic heavy metals from wastewater[J]. Chinese Journal of Chemical Engineering, 2019, 27(2): 305-313.
[9]	Giorgio Vilardi, Luca Di Palma, Nicola Verdone. Heavy metals adsorption by banana peels micro-powder: Equilibrium modeling by non-linear models[J]. Chinese Journal of Chemical Engineering, 2018, 26(3): 455-464.
[10]	Jianlong Wang, Yuanling Zhao, Pingping Zhang, Liqiong Yang, Huai'ao Xu, Guangpeng Xi. Adsorption characteristics of a novel ceramsite for heavy metal removal from stormwater runoff[J]. Chinese Journal of Chemical Engineering, 2018, 26(1): 96-103.
[11]	Alexandros D. Kotzapetros, Panayotis A. Paraskevas, Athanasios S. Stasinakis. Design of a modern automatic control system for the activated sludge process in wastewater treatment[J]. Chinese Journal of Chemical Engineering, 2015, 23(8): 1340-1349.
[12]	Gaixue Song, Zhenyu Chu, Wanqin Jin, Hongqi Sun. Enhanced performance of g-C₃N₄/TiO₂ photocatalysts for degradation of organic pollutants under visible light[J]. Chinese Journal of Chemical Engineering, 2015, 23(8): 1326-1334.
[13]	Qin Lu, Haiyan Wu, Haoyan Li, Dianhai Yang. Enhanced biological nutrient removal inmodified carbon source division anaerobic anoxic oxic process with return activated sludge pre-concentration[J]. Chinese Journal of Chemical Engineering, 2015, 23(6): 1027-1034.
[14]	Xianli Shi, Li Deng, Fangfang Sun, Jieyu Liang, Xu Deng. Key factors governing alkaline pretreatment of waste activated sludge[J]. Chinese Journal of Chemical Engineering, 2015, 23(5): 842-846.
[15]	Francesco Ferella, Ida De Michelis, Agostino Scocchera, Mario Pelino, Francesco Vegliò. Extraction of metals from automotive shredder residue: Preliminary results of different leaching systems[J]. , 2015, 23(2): 417-424.

Impacts of Power Density on Heavy Metal Release During Ultrasonic Sludge Treatment Process

Impacts of Power Density on Heavy Metal Release During Ultrasonic Sludge Treatment Process

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价