Experimental and Numerical Study of Gas-Liquid Flow in a Sectionalized External-Loop Airlift Reactor

doi:10.1016/j.cjche.2020.10.023

摘要/Abstract

摘要： The external loop airlift reactor (EL-ALR) is widely used for gas-liquid reactions. It's advantage of good heat and mass transfer rates compared to conventional bubble column reactors. In the case of fermentation application where a medium is highly viscous and coalescing in nature, internal in riser helps in the improvement of the interfacial area as well as in the reduction of liquid-phase back mixing. The computational fluid dynamic (CFD) as a tool is used to design and scale-up of sectionalized external loop airlift reactor. The present work deals with computational fluid dynamics (CFD) techniques and experimental measurement of a gas hold-up, liquid circulation velocity, liquid axial velocity, Sauter mean bubble diameter over a broad range of superficial gas velocity 0.0024 ≤ U_G ≤ 0.0168 m·s^-1. The correlation has been made for bubble size distribution with specific power consumption for different plate configurations. The effects of an internal on different mass transfer models have been completed to assess their suitability. The predicted local mass transfer coefficient has been found higher in the sectionalized external loop airlift reactor than the conventional EL-ALR.

关键词: Multiphase reactor, Bioreactors, Computational fluid dynamic, Sectionalised external loop airlift reactor, Gas hold up, Mass transfer

Abstract: The external loop airlift reactor (EL-ALR) is widely used for gas-liquid reactions. It's advantage of good heat and mass transfer rates compared to conventional bubble column reactors. In the case of fermentation application where a medium is highly viscous and coalescing in nature, internal in riser helps in the improvement of the interfacial area as well as in the reduction of liquid-phase back mixing. The computational fluid dynamic (CFD) as a tool is used to design and scale-up of sectionalized external loop airlift reactor. The present work deals with computational fluid dynamics (CFD) techniques and experimental measurement of a gas hold-up, liquid circulation velocity, liquid axial velocity, Sauter mean bubble diameter over a broad range of superficial gas velocity 0.0024 ≤ U_G ≤ 0.0168 m·s^-1. The correlation has been made for bubble size distribution with specific power consumption for different plate configurations. The effects of an internal on different mass transfer models have been completed to assess their suitability. The predicted local mass transfer coefficient has been found higher in the sectionalized external loop airlift reactor than the conventional EL-ALR.

Key words: Multiphase reactor, Bioreactors, Computational fluid dynamic, Sectionalised external loop airlift reactor, Gas hold up, Mass transfer

Shivanand M. Teli, Channamallikarjun S. Mathpati. Experimental and Numerical Study of Gas-Liquid Flow in a Sectionalized External-Loop Airlift Reactor[J]. 中国化学工程学报, 2021, 32(4): 39-60.

Shivanand M. Teli, Channamallikarjun S. Mathpati. Experimental and Numerical Study of Gas-Liquid Flow in a Sectionalized External-Loop Airlift Reactor[J]. Chinese Journal of Chemical Engineering, 2021, 32(4): 39-60.

参考文献

[1] M. Popović, C.W. Robinson, The specific interfacial area in external-circulationloop airlifts and a bubble column-I. Aqueous sodium sulphite solution, Chem. Eng. Sci. 42(1987) 2811-2824.
[2] M.Y. Chisti, B. Halard, M. Moo-Young, Liquid circulation in airlift reactors, Chem. Eng. Sci. 43(1988) 451-457.
[3] M.Y. Chistit, M. Young, Airlift reactors:characteristics, applications and design considerations, Chem. Eng. Commun. 60(1987) 195-242.
[4] M.Y. Chisti, Airlift Bioreactor, 1 edition., Elsevier Applied Biotechnology Series, Elsevier Applied Science, London, 1989.
[5] C. Bentifraouine, C. Xuereb, J.P. Riba, Effect of gas liquid separator and liquid height on the global hydrodynamic parameters of an external loop airlift contactor, Chem. Eng. J. 66(1997) 91-95.
[6] C. Lu, Experiment and CFD simulation on gas holdup characteristics in an internal loop reactor with external liquid circulation, Int. J. Chem. React. Eng. 7(2009) 1.
[7] N. Moudoud, R. Rihani, F. Bentahar, J. Legrand, Global hydrodynamic of hybrid external loop airlift reactor:Experiments and CFD modelling, Chem. Eng. Process.-Process Intensif. 129(2018) 118-130.
[8] Z. Chen, Z. Jiang, X. Zhang, J. Zhang, Numerical and experimental study on the CO₂ gas-liquid mass transfer in flat-plate airlift photobioreactor with different baffles, Biochem. Eng. J. 106(2016) 129-138.
[9] S.B. Pawar, CFD analysis of flow regimes in airlift reactor using Eulerian-Lagrangian approach, Can. J. Chem. Eng. 95(2017) 420-431.
[10] S. Roy, M.T. Dhotre, J.B. Joshi, CFD simulation of flow and axial dispersion in external loop airlift reactor, Chem. Eng. Res. Des. 84(2006) 677-690.
[11] S. Roy, J.B. Joshi, CFD study of mixing characteristics of bubble column and external loop airlift reactor, ASIA-PACIFIC J. Chem. Eng. 3(2008) 97-105.
[12] K.M. Dhanasekharan, J. Sanyal, A. Jain, A. Haidari, A generalized approach to model oxygen transfer in bioreactors using population balances and computational fluid dynamics, Chem. Eng. Sci. 60(2005) 213-218.
[13] J. Karcz, M. Musia, M. Bitenc, M. Doma, CFD Modelling of the fluid flow characteristics in an external-Loop air-lift reactor, Chem. Eng. Trans. 32(2013) 1435-1440.
[14] D. Law, F. Battaglia, Numerical simulations for hydrodynamics of air-water external loop airlift reactor flows with bubble break-up and coalescence effects, J. Fluids Eng. 135(2013) 8.
[15] D. Law, F. Battaglia, T.J. Heindel, Simulating gas-liquid flows in an external loop airlift reactor, ASME Int. Mech. Eng. Congr. Expo. Proc. 10(2009) 395-403.
[16] A.B. Pandit, Y.K. Doshi, Mixing time studies in bubble column reactor with and without internals, Int. J. Chem. React. Eng. 3(2005) 1.
[17] S.N. Palaskar, J.K. De, A.B. Pandit, Liquid phase RTD studies in sectionalized bubble column, Chem. Eng. Technol. 23(2000) 61-69.
[18] H. Jin, Y. Lian, L. Qin, S. Yang, G. He, Z. Guo, Parameters measurement of hydrodynamics and CFD simulation in multi-stage bubble columns, Can. J. Chem. Eng. 92(2014) 1444-1454.
[19] J. Alvaré, M.H. Al-Dahhan, Gas holdup in trayed bubble column reactors, Ind. Eng. Chem. Res. 45(2006) 3320-3326.
[20] K. Mohanty, D. Das, M.N. Biswas, Hydrodynamics of a novel multi-stage external loop airlift reactor, Chem. Eng. Sci. 61(2006) 4617-4624.
[21] K. Mohanty, D. Das, M.N. Biswas, Mass transfer characteristics of a novel multistage external loop airlift reactor, Chem. Eng. J. 133(2007) 257-264.
[22] S.M. Teli, C. Mathpati, Hydrodynamic studies in sectionalised external loop air lift reactors, Indian Chem. Eng. (2019) 1-16.
[23] M. Atenas, M. Clark, V. Lazarova, Holdup and liquid circulation velocity in a rectangular air-lift bioreactor, Ind. Eng. Chem. Res. 38(1999) 944-949.
[24] V. Sivasubramanian, B. Naveen Prasad, Effects of superficial gas velocity and fluid property on the hydrodynamic performance of an airlift column with alcohol solution, Int. J. Eng. Sci. Technol. 1(2011) 245-253.
[25] M. Utiger, F. Stuber, A.M. Duquenne, H. Delmas, C. Guy, Local measurements for the study of external loop airlift hydrodynamics, Can. J. Chem. Eng. 77(1999) 375-382.
[26] M. Asari, F. Hormozi, Experimental determination of bubble size in solution of surfactants of the bubble column, J. Adv. Chem. Eng. 04(2014) 1-5.
[27] C.P. Ribeiro, P.L.C. Lage, Experimental study on bubble size distributions in a direct-contact evaporator, Brazilian J. Chem. Eng. 21(2004) 69-81.
[28] G. Besagni, F. Inzoli, The effect of liquid phase properties on bubble column fluid dynamics:Gas holdup, flow regime transition, bubble size distributions and shapes, interfacial areas and foaming phenomena, Chem. Eng. Sci. 170(2017) 270-296.
[29] G.R. Guédon, G. Besagni, F. Inzoli, Prediction of gas-liquid flow in an annular gap bubble column using a bi-dispersed Eulerian model, Chem. Eng. Sci. 161(2017) 138-150.
[30] K. Ekambara, M.T. Dhotre, J.B. Joshi, CFD simulations of bubble column reactors:1D, 2D and 3D approach, Chem. Eng. Sci. 60(2005) 6733-6746.
[31] W.M. Clift, R. Grace, J.R. Bubbles, Drops and Particles, Courier Corporation, 2005.
[32] M. Pourtousi, P. Ganesan, J.N. Sahu, Effect of bubble diameter size on prediction of flow pattern in Euler-Euler simulation of homogeneous bubble column regime, Meas. J. Int. Meas. Confed. 76(2015) 255-270.
[33] S.B.D. Pfleger, Modelling and simulation of the dynamic flow behaviour in a rectangular bubble column, Chem. Enginnering Sci. 56(2001) 1737-1747.
[34] A.A. Kulkarni, J.B. Joshi, Lift force on bubbles in a bubble column reactor:Experimental analysis, Chem. Eng. Sci. 63(2005) 5873-5931.
[35] A. Tomiyama, G.P. Celata, S. Hosokawa, S. Yoshida, Terminal velocity of single bubbles in surface tension force dominant regime, Int. J. Multiph. Flow. 28(2002) 1497-1519.
[36] S. Schwarz, T. Kempe, J. Fröhlich, An immersed boundary method for the simulation of bubbles with varying shape, J. Comput. Phys. 315(2016) 124-149.
[37] D.A. Drew, R.T. Lahey Jr. The virtual mass and lift force on a sphere in rotating and straining inviscid flow, Int. J. Multi. Flow. 13(1987) 113-121.
[38] L.M. Milne-Thomson, Theoretical hydrodynamics, Bull. Am. Math. Soc. 47(5) (1941) 352-353
[39] R. Higbie, The rate of exposure ofa pure gas into a still liquid during short periods of exposure, Trans. Am. Inst. Chern. Eng. 31(1935) 365-389.
[40] P.V. Danckwerts, Significance of liquid-film coefficients in gas absorption, Indus Eng. Chem. 43(1951) 1460-1467.
[41] S.S. Alves, C.I. Maia, J.M.T. Vasconcelos, A.J. Serralheiro, Bubble size in aerated stirred tanks, Chem. Eng. J. 89(2002) 109