[1] J. Huang, Y. He, L. Wang, Y. Huang, B. Jiang, Bifunctional Au@TiO2 core-shell nanoparticle films for clean water generation by photocatalysis and solar evaporation, Energy Convers. Manag. 132(2017) 452-459. [2] BP Statistical Review of World Energy. British Petroleum, http://www.bp.com/statisticalreview,2013. [3] Final Energy Consumption and Greenhouse Gas Emissions in Tokyo. Bureau of Environment Tokyo Metropolitan Government, 2015. [4] SUMMARY:Natural Gas in The World-2016Edition. CEDIGAZ, 2016. [5] Singapore Energy Statistics 2017(EB/OL). Energy Market Authority. https://www.ema.gov.sg/Singapore_Energy_Statistics.aspx. [6] X. Meng, Q. Yu, Y. Gao, Q. Zhang, C. Li, Q. Cui, Enhanced propene/ethene selectivity for methanol conversion over pure silica zeolite:Role of hydrogen-bonded silanol groups, Catal. Commun. 61(2015) 67-71. [7] Rachit Khare, Dean Millar, Aditya Bhan, A mechanistic basis for the effects of crystallite size on light olefin selectivity in methanol-to-hydrocarbons conversion on MFI, J. Catal. 321(2015) 23-31. [8] S. Zhang, Y. Gong, L. Zhang, Y. Liu, T. Dou, J. Xu, F. Deng, Hydrothermal treatment on ZSM-5 extrudates catalyst for methanol to propylene reaction:Finely tuning the acidic property, Fuel Process. Technol. 129(2015) 130-138. [9] S.M.T. Almutairi, B. Mezari, E.A. Pidko, P.C.M.M. Magusin, E.J.M. Hensen, Influence of steaming on the acidity and the methanol conversion reaction of HZSM-5 zeolite, J. Catal. 307(2013) 194-203. [10] C. Heppner, J.L.C.M. Dorne, S. Fabiansson, P. Verger, P. Fuerst, M.L. Fernandez-Cruz, P.V.D. Brandt, P.O. Darnerud, G. Speijers, T. Addiscot, A. Cockburn, The first risk benefit assessment of nitrate in vegetables:A European perspective, Toxicol. Lett. (2008) 62-66. [11] V. Aparicio, J.L. Costa, M. Zamora, Nitrate leaching assessment in a long-term experiment under supplementary irrigation in humid Argentina, Agric. Water Manag. 12(2008) 1361-1372. [12] M. Riaz, I.A. Mian, M.S. Cresser, Extent and causes of 3D spatial variations in potential N mineralization and the risk of ammonium and nitrate leaching from an N-impacted permanent grassland near York, UK, Environ. Pollut. 156(2008) 1075-1082. [13] Y. Xian, L. Liang, T. Hua, S. Gavin, H. Huan, Salinity of animal manure and potential risk of secondary soil salinization through successive manure application, Sci. Total Environ. 383(2007) 106-112. [14] R.B. Thompson, C. Martínez-Gaitan, M. Gallardo, C. Giménez, M.D. Fernández, Identification of irrigation and N management practices that contribute to nitrate leaching loss from an intensive vegetable production system by use of a comprehensive survey, Agric. Water Manag. 89(2007) 261-274. [15] X. Li, C. Hu, J.A. Delgado, Y. Zhang, Z. Ouyang, Increased nitrogen use efficiencies as a key mitigation alternative to reduce nitrate leaching in North China plain, Agric. Water Manag. 89(2006) 137-147. [16] Y. Seo, P.J. Egbelu, Process plan selection based on product mix and production volume, Int. J. Prod. Res. 34(1996) 2639-2655. [17] P.N.K. Phuc, V.F. Yu, S. Chou, Manufacturing production plan optimization in threestage supply chains under Bass model market effects, Comput. Ind. Eng. 65(2013) 509-516. [18] J.S.R. Wheeler, S.W. Reynolds, S. Lancaster, V.S. Romanguera, S.G. Yeates, Polymer degradation during continuous ink-jet printing, Polym. Degrad. Stab. 105(2014) 116-121. [19] J.S.R. Wheeler, A. Longpré, D. Sells, D. McManus, S. Lancaster, S.W. Reynolds, S.G. Yeates, Effect of polymer branching on degradation during inkjet printing, Polym. Degrad. Stab. 128(2016) 1-7. [20] F.O. Arimoro, Impact of rubber effluent discharges on the water quality and macroinvertebrate community assemblages in a forest stream in the Niger Delta, Chemosphere 77(2009) 440-449. [21] R. Saidur, S. Mekhilef, Energy use energy savings and emission analysis in the Malaysian rubber producing industries, Appl. Energy 87(2009) 2746-2758. [22] J.J.S. Satapathy, A. Nag, G.B. Nando, Modification of waste polypropylene with waste rubber dust from textile cot industry and its characterization, Process Saf. Environ. Prot. 85(2007) 318-326. [23] G. Morales, A. Leevers, Patrick, Experimental investigation of the effect of residual stresses on rapid crack propagation in polyethylene (PE100) pipes, Polym. Eng. Sci. 53(2013) 367-374. [24] P. Özbek, C. Argyrakis, P. Leevers, Fracture mechanics analysis of arc shaped specimens for pipe grade polymers, Polym. Test. 28(2009) 357-361. [25] Y. Show, K. Takahashi, Stainless steel bipolar plate coated with carbon nanotube (CNT)/polytetrafluoroethylene (PTFE) composite film for proton exchange membrane fuel cell (PEMFC), J. Power Sources 190(2009) 322-325. [26] M.H.G.W. Okumura, H. Ueda, W. Kuriyama, K. Uzawa, I. Kimpara, Mechanical and thermal properties of carbon fiber/polypropylene composite filled with nano-clay, Compos. Part B 69(2015) 94-100. [27] C. Unterweger, J. Duchoslav, D. Stifter, C. Fürst, Characterization of carbon fiber surfaces and their impact on the mechanical properties of short carbon fiber reinforced polypropylene composites, Compos. Sci. Technol. 108(2015) 41-47. [28] G. Huang, S. Wang, P. Song, C. Wu, S. Chen, X. Wang, Combination effect of carbon nanotubes with graphene on intumescent flame-retardant polypropylene nanocomposites, Compos. Part A 59(2014) 18-25. [29] Q. Chen, Shen, J. Hu, Y. Huang, W. Ye, M. Xin, Miscibility crystallization behavior and specific intermolecular interactions in thermosetting polymer blends of novolac epoxy resin and polyethylene glycol, Polym. Eng. Sci. 48(2008) 556-563. [30] G. Hu, B. Wang, X. Zhou, Effect of EPDM-MAH compatibilizer on the mechanical properties and morphology of nylon 11/PE blends, Mater. Lett. 58(2004) 3457-3460. |