SCI和EI收录∣中国化工学会会刊

›› 2016, Vol. 24 ›› Issue (2): 221-225.DOI: 10.1016/j.cjche.2015.07.019

• Selected Papers from the International Solvent Extraction Conference • Previous Articles     Next Articles

Kinetic study on selective extraction of HCl and H3PO4 in a microfluidic device

Fang Zhao, Yangcheng Lu, Kai Wang, Guangsheng Luo   

  1. The State Key Lab of Chemical Engineering, Department of Chemical Engineering, Tsinghua University, Beijing 100084, China
  • Received:2015-01-15 Revised:2015-02-28 Online:2016-03-14 Published:2016-02-28
  • Supported by:
    Supported by the National Natural Science Foundation of China (91334201).

Abstract: In the extraction method for preparing KH2PO4, one of the key processes is the selective extraction of HCl over H3PO4. In our work, extraction kinetic studies have been carried out in a microfluidic device with a coaxial microchannel, using the extractant of 33.3% (by volume) trioctylamine (TOA) dissolved in n-octanol,with different aqueous phases: the HCl solution, the H3PO4 solution, and H3PO4 and KCl solutions of different concentrations. The changes of the extraction efficiency of HCl and H3PO4 and the selectivity for HCl along with the residence timewere investigated.Wefound that fast extraction kinetics could be realized in microfluidic devices, and that HCl could be extracted faster than H3PO4 due to smallermass transfer resistance and much stronger reaction between HCl and TOA. For the extraction of H3PO4 and KCl solutions, the selectivity for HCl first increased and then decreased when TOAwas in excess of H3PO4 in the initial feeds, and in contrast, always increasedwhen H3PO4was in excess of TOA in the initial feeds. The diverse changes of selectivity for HCl alongwith the residence timeindicate that a dynamic control of selectivity in microfluidic devices may be important and accessible for improving the KH2PO4 conversion efficiency in extraction method.

Key words: Kinetics, Selective extraction, Microchannel, TOA, HCl, H3PO4