Excess properties and spectroscopic studies for binary system polyethylene glycol 600 + dimethyl sulfoxide at T=(298.15, 303.15, 308.15, 313.15, and 318.15) K

doi:10.1016/j.cjche.2017.01.001

摘要/Abstract

摘要： The work presents density (ρ) and viscosity (η) data of binary system polyethylene glycol 600 (PEG) + dimethyl sulfoxide (DMSO) over the entire concentration range at T=(298.15, 303.15, 308.15, 313.15 and 318.15) K and atmospheric pressure. On the basis of density and viscosity values, the excess properties of PEG (1) + DMSO (2) mixtures, including excess molar volume (V_m^E), viscosity deviation (△η), excess free energies of activation (△G^*E), and isobaric thermal expansion coefficient (α_p), were calculated. At the same time, in order to conjecture the density viscosity under different conditions, the density and viscosity data were fitted with the corresponding formula. The calculated results of V_m^E, △η, and △G^*E were fitted with the Redlich-Kister equation to derive coefficients and estimate the standard deviations (σ) between the experimental and calculated values. Moreover, the intermolecular interaction of PEG with DMSO was discussed on the basis of FTIR and UV-Vis spectral results of PEG (1) + DMSO (2) mixtures. The results indicated that there were the hydrogen bonding and interactions of hydroxyl hydrogen atoms in PEG with oxygen atoms in DMSO.

关键词: Density, Viscosity, Excess property, PEG600, Dimethyl sulfoxide

Abstract: The work presents density (ρ) and viscosity (η) data of binary system polyethylene glycol 600 (PEG) + dimethyl sulfoxide (DMSO) over the entire concentration range at T=(298.15, 303.15, 308.15, 313.15 and 318.15) K and atmospheric pressure. On the basis of density and viscosity values, the excess properties of PEG (1) + DMSO (2) mixtures, including excess molar volume (V_m^E), viscosity deviation (△η), excess free energies of activation (△G^*E), and isobaric thermal expansion coefficient (α_p), were calculated. At the same time, in order to conjecture the density viscosity under different conditions, the density and viscosity data were fitted with the corresponding formula. The calculated results of V_m^E, △η, and △G^*E were fitted with the Redlich-Kister equation to derive coefficients and estimate the standard deviations (σ) between the experimental and calculated values. Moreover, the intermolecular interaction of PEG with DMSO was discussed on the basis of FTIR and UV-Vis spectral results of PEG (1) + DMSO (2) mixtures. The results indicated that there were the hydrogen bonding and interactions of hydroxyl hydrogen atoms in PEG with oxygen atoms in DMSO.

Key words: Density, Viscosity, Excess property, PEG600, Dimethyl sulfoxide

Liang Ma, Feng Sha, Xianshu Qiao, Qiang Li, Jianbin Zhang. Excess properties and spectroscopic studies for binary system polyethylene glycol 600 + dimethyl sulfoxide at T=(298.15, 303.15, 308.15, 313.15, and 318.15) K[J]. , 2017, 25(9): 1249-1255.

参考文献

[1] S. Tian, Y. Hou, W. Wu, S. Ren, Hydrophobic task-specific ionic liquids:synthesis, properties and application for the capture of SO₂, J. Hazard. Mater. 278(2014) 409-416.
[2] K. Huang, S. Xia, X. Zhang, Y. Chen, Y. Wu, X. Hu, Comparative study of the solubilities of SO₂ in five low volatile organic solvents (sulfolane, ethylene glycol, propylene carbonate, n-methylimidazole, and n-methylpyrrolidone), J. Chem. Eng. Data 59(2014) 1202-1212.
[3] T. Zhao, J. Zhang, B. Guo, F. Zhang, F. Sha, X. Xie, X. Wei, Density, viscosity and spectroscopic studies of the binary system of ethylene glycol + dimethyl sulfoxide at T=(298.15 to 323.15) K, J. Mol. Liq. 207(2015) 315-322.
[4] B. Vijaya Kumar Naidu, K. Chowdoji Rao, M.C.S. Subha, Densities and viscosities of mixtures of some glycols and polyglycols in dimethyl sulfoxide at 308.15 K, J. Chem. Eng. Data 47(2002) 379-382.
[5] J.V. Holst, S.R.A. Kersten, J.A. Hogendoorn, Physiochemical properties of several aqueous potassium amino acid salts, J. Chem. Eng. Data 53(2008) 1286-1291.
[6] A.F. Portugal, J.M. Sousa, F.D. Magalhães, Solubility of carbon dioxide in aqueous solutions of amino acid salts, Chem. Eng. Sci. 64(2009) 1993-2002.
[7] C. Bhanot, S. Trivedi, A. Gupta, S. Pandey, Dynamic viscosity versus probe-reported microviscosity of aqueous mixtures of poly(ethylene glycol), J. Chem. Thermodyn. 45(2012) 137-144.
[8] S. Trivedi, C. Bhanot, S. Pandey, Densities of {poly(ethylene glycol) + water} over the temperature range (283.15 to 363.15) K, J. Chem. Thermodyn. 42(2010) 1367-1371.
[9] C. Castellari, R. Francesconi, F. Comelli, Excess molar enthalpies and hydrogen bonding in binary mixtures containing glycols or poly(ethylene glycols) and 3-phenylpropyl alcohol at 308.15 K and atmospheric pressure, Thermochim. Acta 424(2004) 69-73.
[10] S. Trivedi, S. Pandey, Densities of 1-butyl-3-methylimidazolium hexafluorophosphate + poly(ethylene glycol) in the temperature range (283.15 to 363.15) K, J. Chem. Eng. Data 56(2011) 2168-2174.
[11] O. Ciocirlan, O. Iulian, Vapor pressure, density, viscosity, and refractive index of dimethyl sulfoxide +1,4-dimethylbenzene system, J. Serb. Chem. Soc. 73(2008) 73-85.
[12] X. Wang, F. Yang, Y. Gao, Z. Liu, Volumetric properties of binary mixtures of dimethyl sulfoxide with amines from (293.15 to 363.15) K, J. Chem. Thermodyn. 57(2013) 145-151.
[13] J. Baragi, M. Aralaguppi, T. Aminabhavi, M. Kariduraganavar, A.S. Kittur, Density, viscosity, refractive index, and speed of sound for binary mixtures of anisole with 2-chloroethanol, 1,4-dioxane, tetrachloroethylene, tetrachloroethane, DMF, DMSO, and diethyl oxalate at (298.15, 303.15, and 308.15) K, J. Chem. Eng. Data 50(2005) 910-916.
[14] A. Ali, S. Ansari, A.K. Nain, Densities, refractive indices and excess properties of binary mixtures of dimethylsulphoxide with some poly(ethylene glycol)s at different temperatures, J. Mol. Liq. 178(2013) 178-184.
[15] K. Rubini, R. Francesconi, A. Bigi, F. Comelli, Excess molar enthalpies and heat capacities of dimethyl sulfoxide + seven normal alkanols at 303.15 K and atmospheric pressure, Thermochim. Acta 452(2007) 124-127.
[16] K. Zhang, J. Yang, X. Yu, J. Zhang, X. Wei, Densities and viscosities for binary mixtures of poly(ethylene glycol) 400+ dimethyl sulfoxide and poly(ethylene glycol) 600+ water at different temperatures, J. Chem. Eng. Data 56(2011) 3083-3088.
[17] M.A. Saleh, O. Ahmed, M.S. Ahmed, Excess molar volume, viscosity and thermodynamics of viscous flow of the system dimethylsulfoxide and acetic acid, J. Mol. Liq. 115(2004) 41-47.
[18] M.M.H. Bhuiyan, J. Ferdaush, M.H. Uddin, Densities and viscosities of binary mixtures of {dimethylsulfoxide + aliphatic lower alkanols (C1-C1)} at temperatures from T=303.15 K to T=323.15 K, J. Chem. Thermodyn. 39(2007) 675-683.
[19] M.D.C. Grande, J.A. Juliá, M. Garcí, C.M. Marschoff, On the density and viscosity of (water + dimethylsulphoxide) binary mixtures, J. Chem. Thermodyn. 39(2007) 1049-1056.
[20] X. Esteve, A. Conesa, Liquid densities, kinematic viscosities, and heat capacities of some alkylene glycol dialkyl ethers, J. Chem. Eng. Data 48(2003) 392-397.
[21] J.H. Song, S.B. Park, J.H. Yoon, H. Lee, Densities and viscosities of monoethanolamine + ethylene glycol + water, J. Chem. Eng. Data 41(1996) 1152-1154.
[22] X.X. Li, G.M. Xu, Y.W. Wang, Y.J. Hu, Density, viscosity, and excess properties for binary mixture of diethylene glycol monoethyl ether + water from 293.15 to 333.15 K at atmospheric pressure, Chin. J. Chem. Eng. 17(6) (2009) 1009-1013.
[23] H.R. Rafiee, F. Frouzesh, The study of partial and excess molar volumes for binary mixtures of nitrobenzene and benzaldehyde with xylene isomers from T=(298.15 to 318.15) K and P=0.087 MPa, J. Adv. Res. 7(2016) 769-780.
[24] A.S. Alkindi, Y.M. Al-Wahaibi, A.H. Muggeridge, Physical properties (density, excess molar volume, viscosity, surface tension, and refractive index) of ethanol + glycerol, J. Chem. Eng. Data 53(2008) 2793-2796.
[25] G.P. Dubey, M. Sharma, N. Dubey, Study of densities, viscosities, and speeds of sound of binary liquid mixtures of butan-1-ol with n-alkanes (C6, C8, and C10) at T=(298.15, 303.15, and 308.15) K, J. Chem. Thermodyn. 40(2008) 309-320.
[26] N. Zhang, J. Zhang, Y. Zhang, J. Bai, T. Hou, X. Wei, Excess molar volumes and viscosities of poly(ethylene glycol) 300+ water at different temperatures, Fluid Phase Equilib. 313(2012) 7-10.
[27] L. Li, J. Zhang, Q. Li, B. Guo, T. Zhao, F. Sha, Density, viscosity, surface tension, and spectroscopic properties for binary system of 1,2-ethanediamine + diethylene glycol, Thermochim. Acta 590(2014) 91-99.
[28] M. Chorążewski, A. Grzybowski, M. Paluch, Isobaric thermal expansion of compressed 1,4-dichlorobutane and 1-bromo-4-chlorobutane:Transitiometric results and a novel application of the general density scaling-based equation of state, Ind. Eng. Chem. Res. 54(2015) 6400-6407.
[29] S. Zang, D. Fang, J. Li, Y. Zhang, S. Yue, Estimation of physicochemical properties of ionic liquid HPReO₄ using surface tension and density, J. Chem. Eng. Data 54(2009) 2498-2500.
[30] J. Liu, Y. Feng, L. Chen, G. Wu, Z. Yu, Selective molecular interactions between dimethyl sulfoxide and paraldehyde studied by two-dimensional correlation FT-IR spectroscopy, Vib. Spectrosc. 36(2004) 203-206.
[31] S. Bertoluzza, M.A. Bonora, P. Battaglia, Monti, Raman and infrared study on the effects of dimethylsulphoxide (DMSO) on water structure, J. Raman Spectrosc. 8(1979) 231-235.
[32] G.S. Denisov, A. Koll, V.I. Lobadyuk, V.M. Schreiber, A.V. Shurukhina, V.N. Spevak, Hydrogen bonding in coordination compounds containing homoconjugated bisdimethylsulfoxide cation. Ab initio and IR studies, J. Mol. Struct. 605(2002) 221-226.