Preparation and characterization of H4SiW12O40@MIL-100(Fe) and its catalytic performance for synthesis of 4,4'-MDA

doi:10.1016/j.cjche.2017.03.036

Chinese Journal of Chemical Engineering ›› 2018, Vol. 26 ›› Issue (2): 330-336.DOI: 10.1016/j.cjche.2017.03.036

• 第25届中国过程控制会议专栏 • 上一篇下一篇

Preparation and characterization of H₄SiW₁₂O₄₀@MIL-100(Fe) and its catalytic performance for synthesis of 4,4'-MDA

Yunhuan Kong, Xiaomeng Cheng, Hualiang An, Xinqiang Zhao, Yanji Wang

Hebei Provincial Key Lab of Green Chemical Technology and Efficient Energy Saving, School of Chemical Engineering and Technology, Hebei University of Technology, Tianjin 300130, China

收稿日期:2017-02-09 修回日期:2017-03-25 出版日期:2018-02-28 发布日期:2018-03-16
通讯作者: Xinqiang Zhao
基金资助:
Supported by the National Natural Science Foundation of China (21236001, 21476058, 21506046).

Preparation and characterization of H₄SiW₁₂O₄₀@MIL-100(Fe) and its catalytic performance for synthesis of 4,4'-MDA

Yunhuan Kong, Xiaomeng Cheng, Hualiang An, Xinqiang Zhao, Yanji Wang

Hebei Provincial Key Lab of Green Chemical Technology and Efficient Energy Saving, School of Chemical Engineering and Technology, Hebei University of Technology, Tianjin 300130, China

Received:2017-02-09 Revised:2017-03-25 Online:2018-02-28 Published:2018-03-16
Contact: Xinqiang Zhao
Supported by:
Supported by the National Natural Science Foundation of China (21236001, 21476058, 21506046).

摘要/Abstract

摘要： The catalytic performance of commonly used heteropolyacids (H₃PW₁₂O₄₀, H₄SiW₁₂O₄₀ and H₃PMo₁₂O₄₀) for the synthesis of 4,4'-methylenedianiline (4,4'-MDA) from aniline and formaldehyde was evaluated and the result showed that H₄SiW₁₂O₄₀ with moderate acid strength exhibited the best catalytic performance. Then H₄SiW₁₂O₄₀@MIL-100(Fe) was prepared by encapsulating H₄SiW₁₂O₄₀ within the pores of MIL-100(Fe) to facilitate its recovery and reuse. The prepared H₄SiW₁₂O₄₀@MIL-100(Fe) was characterized by means of FT-IR, N₂ adsorption-desorption, XRD, TG and then the catalytic performance was evaluated. The result showed that H₄SiW₁₂O₄₀ was highly dispersed in the pores of MIL-100(Fe), and both the Keggin structure of H₄SiW₁₂O₄₀ and the crystal skeleton structure of MIL-100(Fe) could be effectively preserved. Furthermore, H₄SiW₁₂O₄₀@MIL-100(Fe) showed excellent catalytic performance under the following reaction conditions:a molar ratio of aniline to formaldehyde=5, a mass ratio of catalyst to formaldehyde=1.2, a reaction temperature of 120℃ and a reaction time of 6 h. Under the above reaction conditions, the conversion of aniline was 41.1%, and the yield and selectivity of 4,4'-MDA were 81.6% and 79.2%, respectively. Unfortunately, an appreciable loss in the catalytic activity of the recovered H₄SiW₁₂O₄₀@MIL-100(Fe) was observed because of the blocking of the pores and the change of the acidity resulted from the adsorption of alkaline organics such as aniline and 4,4'-MDA. The adsorbed alkaline organics could be cleaned up when the recovered catalyst was washed by methanol and DMF. Then the catalyst was effectively reused up to three cycles without much loss in its activity.

关键词: H₄SiW₁₂O₄₀@MIL-100(Fe), Catalyst activation, 4, 4'-Methylenedianiline synthesis, Multiphase reaction, Stability

Abstract: The catalytic performance of commonly used heteropolyacids (H₃PW₁₂O₄₀, H₄SiW₁₂O₄₀ and H₃PMo₁₂O₄₀) for the synthesis of 4,4'-methylenedianiline (4,4'-MDA) from aniline and formaldehyde was evaluated and the result showed that H₄SiW₁₂O₄₀ with moderate acid strength exhibited the best catalytic performance. Then H₄SiW₁₂O₄₀@MIL-100(Fe) was prepared by encapsulating H₄SiW₁₂O₄₀ within the pores of MIL-100(Fe) to facilitate its recovery and reuse. The prepared H₄SiW₁₂O₄₀@MIL-100(Fe) was characterized by means of FT-IR, N₂ adsorption-desorption, XRD, TG and then the catalytic performance was evaluated. The result showed that H₄SiW₁₂O₄₀ was highly dispersed in the pores of MIL-100(Fe), and both the Keggin structure of H₄SiW₁₂O₄₀ and the crystal skeleton structure of MIL-100(Fe) could be effectively preserved. Furthermore, H₄SiW₁₂O₄₀@MIL-100(Fe) showed excellent catalytic performance under the following reaction conditions:a molar ratio of aniline to formaldehyde=5, a mass ratio of catalyst to formaldehyde=1.2, a reaction temperature of 120℃ and a reaction time of 6 h. Under the above reaction conditions, the conversion of aniline was 41.1%, and the yield and selectivity of 4,4'-MDA were 81.6% and 79.2%, respectively. Unfortunately, an appreciable loss in the catalytic activity of the recovered H₄SiW₁₂O₄₀@MIL-100(Fe) was observed because of the blocking of the pores and the change of the acidity resulted from the adsorption of alkaline organics such as aniline and 4,4'-MDA. The adsorbed alkaline organics could be cleaned up when the recovered catalyst was washed by methanol and DMF. Then the catalyst was effectively reused up to three cycles without much loss in its activity.

Key words: H₄SiW₁₂O₄₀@MIL-100(Fe), Catalyst activation, 4,4'-Methylenedianiline synthesis, Multiphase reaction, Stability

Yunhuan Kong, Xiaomeng Cheng, Hualiang An, Xinqiang Zhao, Yanji Wang. Preparation and characterization of H₄SiW₁₂O₄₀@MIL-100(Fe) and its catalytic performance for synthesis of 4,4'-MDA[J]. Chinese Journal of Chemical Engineering, 2018, 26(2): 330-336.

参考文献

[1] Y.F. Liu, C.Y. Liao, Z.Z. Hao, The polymerization behavior and thermal properties of benzoxazine based on o-allylphenol and 4,4'-diaminodiphenyl methane, React. Funct. Polym. 75(2014) 9-15.

[2] The Upjohn Company, Process for preparing methylene-di-anilines, U.S. Pat., 3857890(1974).

[3] R.S. Varma, Solvent-free organic syntheses using supported reagents and microwave irradiation, Green Chem. 1(1999) 43.

[4] Texaco Inc., Tungsten catalyzed aniline-formaldehyde condensation, U.S. Pat., 4284815(1981).

[5] The Dow Chemical Company, Process for preparing polyamines with ion exchange resin catalysts, U.S. Pat., 4554378(1985).

[6] T. Kugita, S. Hirose, S. Namba, Catalytic activity of zeolites for synthesis reaction of methylenedianiline from aniline and formaldehyde, Catal. Today 111(2006) 275-279.

[7] Chen LJ and Jimenez J, Process for making polyaminopolyphenyl methanes using a mixed solid acid catalyst system, U.S. Pat., 20110021741A1(2011).

[8] M. Salzinger, B. Fichtl, J.A. Lercher, On the influence of pore geometry and acidity on the activity of parent and modified zeolites in the synthesis of methylenedianiline, Appl. Catal. A Gen. 393(1) (2011) 189-194.

[9] Nafziger JL, Rader LA and Seward Jr I J, Process for preparing polyamines with ion exchange resin catalysts, U.S. Pat., 4554378(1985).

[10] D. Bahulayan, R. Sukumar, K.R. Sabu, M. Lalithambika, An easy synthesis of 4,4'-diaminodiphenylmethanes on natural kaolinites, Green Chem. 1(1999) 191-193.

[11] J.P. Tian, H.L. An, X.M. Cheng, X.Q. Zhao, Y.J. Wang, Synthesis of 4,4'-methylenedianiline catalyzed by SO₃H-functionalized ionic liquids, Ind. Eng. Chem. Res. 54(53) (2015) 7571-7579.

[12] L.Y. Wen, E.Z. Min, The research progress of solid heteropoly acid catalyst, Petrochem. Technol. 1(29) (2000) 49-54.

[13] R. Tesser, M.D. Serio, M. Ambrosio, M. Santacesaria, Heterogeneous catalysts for the production of anthraquinone from 2-benzoylbenzoic acid, Chem. Eng. J. 90(2002) 195-201.

[14] M.M. Heravi, K. Bakhtiari, F.F. Bamoharram, 12-Molybdophosphoric acid:A recyclable catalyst for the sythesis of biginelli-type 3, 4-dihydropyrimidine-2(1H)-ones, Catal. Commun. 7(6) (2006) 373-376.

[15] X. Zeng, Q.L. Deng, X. Yuan, J. Wu, H.A. Luo, Catalytic activity of heteropoly acids(salts) for ammoximation of cyclohexanone, Acta Pet. Sin. (Pet. Process. Sect.) 26(5) (2010) 779-784.

[16] T.K. Huang, L. Shi, R. Wang, X.Z. Guo, X.X. Lu, Keggin type heteropolyacids catalyzed synthesis of quinoxaline derivatives in water, Chin. Chem. Lett. 20(2) (2009) 161-164.

[17] X.L. Yang, H.B. Li, Y.X. Miao, Preparation, characterization and catalytic performance of novel HPWs@MIL-101 catalyst, Chem. Res. Appl. 27(2015) 642-648.

[18] F.M. Zhang, Y. Jin, J. Shi, Y.J. Zhong, W.D. Zhu, M. Samy EI-Shall, Polyoxometalates confined in the mesoporous cages of metal-organic framework MIL-100(Fe):Efficient heterogeneous catalysts for esterification and acetalization reactions, Chem. Eng. J. 269(2015) 236-244.

[19] A. Corma, P. Botella, C. Mitchell, Replacing HCl by solid acids in industrial processes:Synthesis of diamino diphenyl methane (DADPM) for producing polyurethanes, Chem. Commun. 17(2004) 2008-2010.

[20] F.M. Zhang, Y. Jin, J. Shi, Y.H. Fu, Y.J. Zhong, W.D. Zhu, Facile synthesis of MIL-100(Fe) under HF-free conditions and its application in the acetalization of aldehydes with diols, Chem. Eng. J. 259(2015) 183-190.

[21] C. Romain, R.M. Catherine, S. Francis, H. Patricia, S. Christian, H.D. Menaschi, et al., Stable polyoxometalate insertion within the mesoporous metal organic framework MIL-100(Fe), J. Mater. Chem. 21(2010) 1226-1233.

[22] Yu-ki Miura, Hiroyuki Imai, Toshiyuki Yokoi, T. Tatsumi, Y. Kamiya, Microporous cesium salts of tetravalent Keggin-type polyoxotungstates Cs₄[SiW₁₂O₄₀], Cs₄[PW₁₁O₃₉(Sn-n-C₄H₉)], and Cs₄[PW₁₁O₃₉(Sn-OH)] and their adsorption properties, Microporous Mesoporous Mater. 174(2013) 34-43.

[23] C.Y. Wang, H.Q. Li, Y. Cao, H.T. Liu, X.J. Hou, Y. Zhang, Thermodynamic analysis on synthesis of 4,4-methylenedianiline by reaction of aniline and formaldehyde, CIESC J. 63(8) (2012) 2348-2355.

[24] J.Q. Yan, Y. Tan, Y.F. Li, Z.M. Wu, M. Chen, L.S. Pan, Y.J. Liu, Synthesis of bisphenol F catalyzed by phosphotungstic acid encapsulated in metal-organic frameworks MIL-100(Cr) and MIL-101(Cr), CIESC J. 66(2015) 576-582.

[25] X.M. Cheng, H.L. An, X.Q. Zhao, Y.J. Wang, Influences of treatment with ethanol on structure and performances of Cs_2.5H_1.5SiW₁₂O₄₀ catalyst for synthesis of 4,4'-diaminodiphenylmethanes, Petrochem. Technol. 45(3) (2016) 285-290.

Preparation and characterization of H₄SiW₁₂O₄₀@MIL-100(Fe) and its catalytic performance for synthesis of 4,4'-MDA

Preparation and characterization of H₄SiW₁₂O₄₀@MIL-100(Fe) and its catalytic performance for synthesis of 4,4'-MDA

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	Xinxin Li, Hongwei Shao, Shichao Zhang, Yong Li, Jingjing Gu, Qiang Huang, Jin Ran. Two dimensional MoS₂ finding its way towards constructing high-performance alkaline recovery membranes[J]. 中国化学工程学报, 2023, 60(8): 155-164.
[2]	Peipei Ai, Huiqing Jin, Jie Li, Xiaodong Wang, Wei Huang. Ultra-stable Cu-based catalyst for dimethyl oxalate hydrogenation to ethylene glycol[J]. 中国化学工程学报, 2023, 60(8): 186-193.
[3]	Bing Liu, Yingjiao Li, Moses Arowo, Guangwen Chu, Yong Luo, Liangliang Zhang, Haikui Zou, Baochang Sun. Sulfonation of 1, 4-diaminoanthraquinone leuco by chlorosulfonic acid: Kinetics and process intensification[J]. 中国化学工程学报, 2023, 58(6): 163-169.
[4]	Yun-Zhang Liu, Lu-Yao Zhang, Dan He, Li-Zhen Chen, Zi-Shuai Xu, Jian-Long Wang. Solubility measurement, correlation and thermodynamic properties of 2, 3, 4-trichloro-1, 5-dinitrobenzene in fifteen mono-solvents at temperatures from 278.15 to 323.15 K[J]. 中国化学工程学报, 2023, 58(6): 224-233.
[5]	Qi Yang, Weikang Dai, Maoshuai Li, Jie Wei, Yi Feng, Cheng Yang, Wanxin Yang, Ying Zheng, Jie Ding, Mei-Yan Wang, Xinbin Ma. Enhanced selective hydrogenation of glycolaldehyde to ethylene glycol over Cu⁰-Cu⁺ sites[J]. 中国化学工程学报, 2023, 57(5): 141-150.
[6]	Pengbao Lian, Lizhen Chen, Dan He, Guangyuan Zhang, Zishuai Xu, Jianlong Wang. Crystallization thermodynamics of 2,4(5)-dinitroimidazole in binary solvents[J]. 中国化学工程学报, 2023, 57(5): 173-182.
[7]	Yueting Shi, Junhai Zhao, Lingli Chen, Hongru Li, Shengtao Zhang, Fang Gao. Double open mouse-like terpyridine parts based amphiphilic ionic molecules displaying strengthened chemical adsorption for anticorrosion of copper in sulfuric acid solution[J]. 中国化学工程学报, 2023, 57(5): 233-246.
[8]	Bingxiao Feng, Lining Hao, Chaoting Deng, Jiaqiang Wang, Hongbing Song, Meng Xiao, Tingting Huang, Quanhong Zhu, Hengjun Gai. A highly hydrothermal stable copper-based catalyst for catalytic wet air oxidation of m-cresol in coal chemical wastewater[J]. 中国化学工程学报, 2023, 57(5): 338-348.
[9]	Shuang Qiu, Yonghou Xiao, Haoran Wu, Shengnan Lu, Qidong Zhao, Gaohong He. One-pot synthesis of bimetallic CeCu-SAPO-34 for high-efficiency selective catalytic reduction of nitrogen oxides with NH₃ at low temperature[J]. 中国化学工程学报, 2023, 56(4): 193-202.
[10]	Xia Xiong, Zuohua Liu, Changyuan Tao, Yundong Wang, Fangqin Cheng, Hong Li. Reduced power consumption in stirred vessel with high solid loading by equipping punched baffles[J]. 中国化学工程学报, 2023, 56(4): 203-214.
[11]	Iltaf Khan, Chunjuan Wang, Shoaib Khan, Jinyin Chen, Aftab Khan, Sayyar Ali Shah, Aihua Yuan, Sohail Khan, Mehwish K. Butt, Humaira Asghar. Bio-capped and green synthesis of ZnO/g-C₃N₄ nanocomposites and its improved antibiotic and photocatalytic activities: An exceptional approach towards environmental remediation[J]. 中国化学工程学报, 2023, 56(4): 215-224.
[12]	Tinghao Jia, Yunbo Yu, Qing Liu, Yao Yang, Ji-Jun Zou, Xiangwen Zhang, Lun Pan. Theoretical and experimental study on the inhibition of jet fuel oxidation by diarylamine[J]. 中国化学工程学报, 2023, 56(4): 225-232.
[13]	Zida Ma, Yuxia Li, Mengmeng Jin, Xiaoqin Liu, Linbing Sun. Fabrication of adsorbents with enhanced Cu^I stability: Creating a superhydrophobic microenvironment through grafting octadecylamine[J]. 中国化学工程学报, 2023, 55(3): 41-48.
[14]	Jingjing Pan, Haoran Sun, Keyi Chen, Yuhao Zhang, Pengnian Shan, Weilong Shi, Feng Guo. Nanodiamonds decorated yolk-shell ZnFe₂O₄ sphere as magnetically separable and recyclable composite for boosting antibiotic degradation performance[J]. 中国化学工程学报, 2023, 54(2): 162-172.
[15]	Qian Zhu, Yan Zhuang, Hongqing Zhao, Peng Zhan, Cong Ren, Changsheng Su, Wenqiang Ren, Jiawen Zhang, Di Cai, Peiyong Qin. 2,5-Diformylfuran production by photocatalytic selective oxidation of 5-hydroxymethylfurfural in water using MoS₂/CdIn₂S₄ flower-like heterojunctions[J]. 中国化学工程学报, 2023, 54(2): 180-191.