Preparation of graphene oxide/natural rubber composites by latex cocoagulation: Relationship between microstructure and reinforcement

doi:10.1016/j.cjche.2020.01.015

中国化学工程学报 ›› 2020, Vol. 28 ›› Issue (4): 1187-1193.DOI: 10.1016/j.cjche.2020.01.015

• Materials and Product Engineering • 上一篇

Preparation of graphene oxide/natural rubber composites by latex cocoagulation: Relationship between microstructure and reinforcement

Yingyan Mao^1,2, Chao Wang³, Li Liu⁴

1 Beijing Institute of Ophthalmology, Beijing Tongren Eye Center, Beijing Tongren Hospital, Capital Medical University, Beijing 100730, China;
2 National Engineering Research Center for Ophthalmology, Beijing Tongren Hospital, Capital Medical University, Beijing 100730, China;
3 Beijing Special Equipment Inspection & Testing Center, Beijing 100029, China;
4 Beijing Engineering Research Center of Advanced Elastomers, Beijing University of Chemical Technology, Beijing 100029, China

收稿日期:2019-10-20 修回日期:2019-12-31 出版日期:2020-04-28 发布日期:2020-07-27
通讯作者: Yingyan Mao
基金资助:
This work was supported by the National Natural Science Foundation of China (Grant Nos. 51073008 and 51103005).

Preparation of graphene oxide/natural rubber composites by latex cocoagulation: Relationship between microstructure and reinforcement

Yingyan Mao^1,2, Chao Wang³, Li Liu⁴

1 Beijing Institute of Ophthalmology, Beijing Tongren Eye Center, Beijing Tongren Hospital, Capital Medical University, Beijing 100730, China;
2 National Engineering Research Center for Ophthalmology, Beijing Tongren Hospital, Capital Medical University, Beijing 100730, China;
3 Beijing Special Equipment Inspection & Testing Center, Beijing 100029, China;
4 Beijing Engineering Research Center of Advanced Elastomers, Beijing University of Chemical Technology, Beijing 100029, China

Received:2019-10-20 Revised:2019-12-31 Online:2020-04-28 Published:2020-07-27
Contact: Yingyan Mao
Supported by:
This work was supported by the National Natural Science Foundation of China (Grant Nos. 51073008 and 51103005).

摘要/Abstract

摘要： Graphene oxide (GO) has recently attracted substantial interest as a possible reinforcing agent for next generation rubber composite materials. In this research, GO was incorporated in natural rubber (NR) composites through latex co-coagulation technique. The microstructures of GO/NR composites were characterized through a combination of transmission electron microscope, scanning electron microscope, X-ray diffraction, Fourier transform infrared spectroscopy, and Differential scanning calorimeter. The results showed that highly exfoliated GO sheets were finely dispersed into NR rubber matrix with strong interface interaction between GO and NR. The mechanical properties of the GO/NR composites were further evaluated. The results showed that the tensile strength, tear strength and modulus can be significantly improved at a content of less than 2 phr. Especially, GO exhibited specific reinforce mechanism in NR due to the stress-induced crystallization effects of NR. The stress transfer from the NR to the GO sheets and the hindrance of GO sheets to the stress-induced crystallization of NR were further displayed in stress-strain behavior of GO/NR composites. These enhanced properties were attributed to the high surface area of GO sheets and highly exfoliated microstructures of GO sheets in NR.

关键词: Graphene oxide, Natural rubber, Microstructure, Stress-strain behavior, Composites

Abstract: Graphene oxide (GO) has recently attracted substantial interest as a possible reinforcing agent for next generation rubber composite materials. In this research, GO was incorporated in natural rubber (NR) composites through latex co-coagulation technique. The microstructures of GO/NR composites were characterized through a combination of transmission electron microscope, scanning electron microscope, X-ray diffraction, Fourier transform infrared spectroscopy, and Differential scanning calorimeter. The results showed that highly exfoliated GO sheets were finely dispersed into NR rubber matrix with strong interface interaction between GO and NR. The mechanical properties of the GO/NR composites were further evaluated. The results showed that the tensile strength, tear strength and modulus can be significantly improved at a content of less than 2 phr. Especially, GO exhibited specific reinforce mechanism in NR due to the stress-induced crystallization effects of NR. The stress transfer from the NR to the GO sheets and the hindrance of GO sheets to the stress-induced crystallization of NR were further displayed in stress-strain behavior of GO/NR composites. These enhanced properties were attributed to the high surface area of GO sheets and highly exfoliated microstructures of GO sheets in NR.

Key words: Graphene oxide, Natural rubber, Microstructure, Stress-strain behavior, Composites

Yingyan Mao, Chao Wang, Li Liu. Preparation of graphene oxide/natural rubber composites by latex cocoagulation: Relationship between microstructure and reinforcement[J]. 中国化学工程学报, 2020, 28(4): 1187-1193.

参考文献

[1] G. Heinrich, M. Klüppel, T.A. Vilgis, Reinforcement of elastomers, Curr. Opin. Solid State Mater. Sci. 6(3) (2002) 195-203.
[2] H. Ren, Y.X. Qu, S.H. Zhao, Reinforcement of styrene-butadiene rubber with silica modified by Silane coupling agents:Experimental and theoretical chemistry study, Chin. J. Chem. Eng. 14(1) (2006) 93-98.
[3] Z. Qian, Z. Peng, Reinforcing styrene-butadiene rubber composites by constructing multiple interaction between rubber and silica, Polym. Compos. 40(5) (2018) 1740-1747.
[4] A.M. Salvi, R. Pucciariello, M.R. Guascito, et al., Characterization of the interface in rubber/silica composite materials, Surf. Interf. Anal. 33(10-11) (2010) 850-861.
[5] A.K. Geim, Graphene:status and prospects, Science 324(5934) (2009) 1530-1534.
[6] A.C. Ferrari, J.C. Meyer, V. Scardaci, et al., Raman spectrum of graphene and graphene layers, Phys. Rev. Lett. 97(18) (2006), 187401..
[7] C.S. Boland, U. Khan, C. Backes, et al., Sensitive, high-strain, high-rate bodily motion sensors based on graphene-rubber composites, ACS Nano 8(9) (2014) 8819-8830.
[8] Z. Liu, W. Wang, X.J. Ju, et al., Graphene-based membranes for molecular and ionic separations in aqueous environments, Chin. J. Chem. Eng., 25(11) (2017) 1598-1605.
[9] Y. Zhu, S. Murali, W. Cai, et al., Graphene and graphene oxide:synthesis, properties, and applications, Cheminform 22(35) (2010) 3906-3924.
[10] William S. Hummers, R.E. Offeman, Preparation of graphitic oxide, Am. Chem. Soc. 208(6) (1958) 1334-1339.
[11] B.P. Singh, B.K. Jena, S. Bhattacharjee, et al., Development of oxidation and corrosion resistance hydrophobic graphene oxide-polymer composite coating on copper, Surf. Coat. Technol. 232(232) (2013) 475-481.
[12] G. Kaur, R. Adhikari, P. Cass, et al., Graphene/polyurethane composites:fabrication and evaluation of electrical conductivity, mechanical properties and cell viability, RSC Adv. 5(120) (2015) 98762-98772.
[13] Y. Mao, S. Zhang, D. Zhang, et al., Enhancing graphene oxide reinforcing potential in composites by combined latex compounding and spray drying, Mater. Res. Express 1(2) (2014), 025009..
[14] B. Yin, J. Wang, H. Jia, et al., Enhanced mechanical properties and thermal conductivity of styrene-butadiene rubber reinforced with polyvinylpyrrolidonemodified graphene oxide, J. Mater. Sci. 51(12) (2016) 5724-5737.
[15] E. Bourgeatlami, J. Faucheu, A. Noël, Latex routes to graphene-based nanocomposites, Polym. Chem. 6(30) (2015) 5323-5357.
[16] X. Wang, M. Tang, J. Wu, et al., Multifunctional properties of graphene/rubber composites fabricated by a modified latex compounding method, Compos. Sci. Technol. 99(4) (2014) 67-74.
[17] B. Wang, X. Gong, J. Li, et al., Double equilibrium melting temperatures and zero growth temperature of PVDF in PVDF/graphene composites, J. Polym. Res. 22(12) (2015) 244.
[18] E. Lago, P.S. Toth, G. Pugliese, et al., Solution blending preparation of polycarbonate/graphene composite:boosting the mechanical and electrical properties, RSC Adv. 6(100) (2016).
[19] X. Zeng, J. Yang, W. Yuan, Preparation of a poly(methyl methacrylate)-reduced graphene oxide composite with enhanced properties by a solution blending method, Eur. Polym. J. 48(10) (2012) 1674-1682.
[20] J.J. Chen, Y. Li, X.M. Zheng, et al., Enhancement in electroactive crystalline phase and dielectric performance of novel PEG-graphene/PVDF composites, Appl. Surf. Sci. 448(2018) 320-330.
[21] H. Li, J. Miao, X. Wu, et al., In-situ "molecular welding" preparation of graphene/polyimide hybrid film with superior thermal conductivity and flexibility, J. Polym. Sci. B Polym. Phys. 56(17) (2018) 1215-1223.
[22] Z. Xu, C. Gao, In-situ polymerization approach to graphene-reinforced nylon-6 composites, Macromolecules 43(16) (2010) 6716-6723.
[23] Y.F. Huang, C.W. Lin, Facile synthesis and morphology control of graphene oxide/polyaniline nanocomposites via in-situ polymerization process, Polymer 53(13) (2012) 2574-2582.
[24] P. Fabbri, E. Bassoli, S.B. Bon, et al., Preparation and characterization of poly (butylene terephthalate)/graphene composites by in-situ polymerization of cyclic butylene terephthalate, Polymer 53(4) (2012) 897-902.
[25] Y. Mao, Shipeng Wen, Yulong Chen, et al., High-performance graphene oxide based rubber composites, Sci. Rep. 3(3) (2013) 2508.
[26] X. Bai, C.Y. Wan, Y. Zhang, et al., Reinforcement of hydrogenated carboxylated nitrile-butadiene rubber with exfoliated graphene oxide, Carbon 49(5) (2011) 1608-1613.
[27] Y. Zhan, J. Wu, H. Xia, et al., Dispersion and exfoliation of graphene in rubber by an ultrasonically-assisted latex mixing and in situ reduction process, Macromolec. Mater. Eng. 296(7) (2011) 590-602.
[28] W. Xing, J. Wu, G. Huang, et al., Enhanced mechanical properties of graphene/natural rubber composites at low content, Polym. Int. 63(9) (2014) 1674-1681.

Preparation of graphene oxide/natural rubber composites by latex cocoagulation: Relationship between microstructure and reinforcement

Preparation of graphene oxide/natural rubber composites by latex cocoagulation: Relationship between microstructure and reinforcement

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	Yingli Li, Zhishuncheng Li, Guangfei Qu, Rui Li, Shuaiyu Liang, Junhong Zhou, Wei Ji, Huiming Tang. Mechanism, behaviour and application of iron nitrate modified carbon nanotube composites for the adsorption of arsenic in aqueous solutions[J]. 中国化学工程学报, 2023, 60(8): 26-36.
[2]	Sinu Poolachira, Sivasubramanian Velmurugan. Graphene oxide/hydrotalcite modified polyethersulfone nanohybrid membrane for the treatment of lead ion from battery industrial effluent[J]. 中国化学工程学报, 2023, 60(8): 253-261.
[3]	Yafei Su, Xuke Zhang, Hui Li, Donglai Peng, Yatao Zhang. In-situ incorporation of halloysite nanotubes with 2D zeolitic imidazolate framework-L based membrane for dye/salt separation[J]. 中国化学工程学报, 2023, 58(6): 103-111.
[4]	Shanghong Ma, Haitao Zhang, Jianbo Qu, Xiuzhong Zhu, Qingfei Hu, Jianyong Wang, Peng Ye, Futao Sai, Shiwei Chen. Preparation of waterborne polyurethane/β-cyclodextrin composite nanosponge by ion condensation method and its application in removing of dyes from wastewater[J]. 中国化学工程学报, 2023, 58(6): 124-136.
[5]	Jianhui Zhou, Xin Lai, Jianfeng Hu, Haijie Qi, Shan Liu, Zhengguo Zhang. Design of a graphene oxide@melamine foam/polyaniline@erythritol composite phase change material for thermal energy storage[J]. 中国化学工程学报, 2023, 58(6): 282-290.
[6]	Chao Yang, Zhelin Su, Yeshuang Wang, Huiling Fan, Meisheng Liang, Zhaohui Chen. Insight into the effect of gel drying temperature on the structure and desulfurization performance of ZnO/SiO₂ adsorbents[J]. 中国化学工程学报, 2023, 56(4): 233-241.
[7]	Zhihao Zhu, Ying Sun, Haijun Yu, Meng Li, Xingming Jie, Guodong Kang, Yiming Cao. Effect of polytetrafluoroethylene hollow fiber microstructure on formaldehyde carbonylation performance in membrane contactor[J]. 中国化学工程学报, 2023, 55(3): 148-155.
[8]	Qingyue Han, Suqing Wang, Wenhan Kong, Bing Ji, Haihui Wang. Composite polymer electrolyte reinforced by graphitic carbon nitride nanosheets for room-temperature all-solid-state lithium batteries[J]. 中国化学工程学报, 2023, 54(2): 257-263.
[9]	Jian Tian, Gen Li, Wang He, Kok Bing Tan, Daohua Sun, Junfu Wei, Qingbiao Li. Insight into the dynamic adsorption behavior of graphene oxide multichannel architecture toward contaminants[J]. 中国化学工程学报, 2023, 53(1): 124-132.
[10]	Jiacheng Chen, Jincheng Wang, Shuhong Li, Kailing Xiang, Shiqiang Song. Pyridine terminated polyurethane dendrimer/chlorinated butyl rubber nanocomposites with excellent mechanical and damping properties[J]. 中国化学工程学报, 2023, 53(1): 211-221.
[11]	Yingmeng Zhang, Luting Liu, Qingwei Deng, Wanlin Wu, Yongliang Li, Xiangzhong Ren, Peixin Zhang, Lingna Sun. Hybrid CuO-Co₃O₄ nanosphere/RGO sandwiched composites as anode materials for lithium-ion batteries[J]. 中国化学工程学报, 2022, 47(7): 185-192.
[12]	Jipeng Dong, Fei Wang, Guanghui Chen, Shougui Wang, Cailin Ji, Fei Gao. Fabrication of nickel oxide functionalized zeolite USY composite as a promising adsorbent for CO₂ capture[J]. 中国化学工程学报, 2022, 46(6): 207-213.
[13]	Jialu Zhang, Xiang Liu, Shuai Liu, Yuxing Li, Qihui Hu, Wuchang Wang. Microscopic morphology evolution of the crystal structure of tetrahydrofuran hydrate under flowing condition[J]. 中国化学工程学报, 2022, 45(5): 103-110.
[14]	Iman Farirzadeh, Majid Riahi Samani, Davood Toghraie. Lead removal from aqueous medium using fruit peels and polyaniline composites in aqueous and non-aqueous solvents in the presence of polyethylene glycol[J]. 中国化学工程学报, 2022, 44(4): 253-259.
[15]	Chen Gu, Wenqiang Weng, Cong Lu, Peng Tan, Yao Jiang, Qiang Zhang, Xiaoqin Liu, Linbing Sun. Decorating MXene with tiny ZIF-8 nanoparticles: An effective approach to construct composites for water pollutant removal[J]. 中国化学工程学报, 2022, 42(2): 42-48.