Issues in Freeze Drying of Aqueous Solutions

摘要/Abstract

摘要： Freeze drying or lyophilization of aqueous solutions is widely used in pharmaceutical industry.The increased importance of the process is gaining a worldwide interest of research.A growing body of literature has demonstrated that the scientific approach can result in improved product quality with minimum trial and error empiricism.Formulation and process development need a systematical understanding of the physical chemistry of freezing and freeze drying,material science and mechanisms of heat and mass transfer.This paper presents an overview on freeze drying of aqueous solutions based on publications in the past few decades.The important issues of the process are analyzed.

关键词: desorption, eutectic formation, excipient, glass transition, sublimation, supercooling

Abstract: Freeze drying or lyophilization of aqueous solutions is widely used in pharmaceutical industry.The increased importance of the process is gaining a worldwide interest of research.A growing body of literature has demonstrated that the scientific approach can result in improved product quality with minimum trial and error empiricism.Formulation and process development need a systematical understanding of the physical chemistry of freezing and freeze drying,material science and mechanisms of heat and mass transfer.This paper presents an overview on freeze drying of aqueous solutions based on publications in the past few decades.The important issues of the process are analyzed.

Key words: desorption, eutectic formation, excipient, glass transition, sublimation, supercooling

王维, 陈墨, 陈国华. Issues in Freeze Drying of Aqueous Solutions[J]. , 2012, 20(3): 551-559.

WANG Wei, CHEN Mo, CHEN Guohua. Issues in Freeze Drying of Aqueous Solutions[J]. , 2012, 20(3): 551-559.

参考文献

1 Brulls, M., Rasmuson, A., "Heat transfer in vial lyophilization", International Journal of Pharmaceutics, 246 (1/2), 1-16 (2002).
2 Nail, S.L., Jiang, S., Chongprasert, S., Knopp, S.A., "Fundamentals of freeze-drying", In: Pharmaceutical Biotechnology 14, Nail, S.L., Akers, M.J., eds., Kluwer Academic/Plenum Publishers, New York, 281-360 (2002),.
3 Pikal, M.J., Roy, M.L., Shah, S., "Heat and mass transfer in vial freeze-drying of pharmaceuticals: role of the vial", Journal of Pharmaceutical Science, 73 (9), 1224-1237 (1984).
4 Liapis, A.I., Bruttini, R., "Freeze drying", In: Handbook of Industrial Drying, 2nd edition., Mujumdar, A.S., eds., Marcel Dekker, New York, 305-343 (1995).
5 Franks, F., "Improved freeze-drying: an analysis of the basic scientific principles", Process Biochemistry, 24 (1), Supplement: ProBioTech, iii-vii (1989).
6 Searles, J.A., Carpenter, J.F., Randolph, T.W., "The ice nucleation temperature determines the primary drying rate of lyophilization for samples frozen on a temperature-controlled shelf", Journal of Pharmaceutical Sciences, 90 (7), 860-871 (2001).
7 Nail, S., Gatlin, L., "Freeze drying: principle and practice", In: Pharmaceutical Dosage Forms, Avis, A., Liebermann, A., Lachmann, L., eds., Marcel Dekker, New York, 163-333 (1993).
8 Franks, F., "Freeze-drying of bioproducts: Putting principles into practice", European Journal of Pharmaceutics and Biopharmaceutics, 45 (3), 221-229 (1998).
9 Hatley, R.H.M., Franks, F., Brown, S., Sandhu, G., Gray, M., "Stabilization of a pharmaceutical drug substance by freeze-drying: A case study", Drug Stability, 1, 73-85 (1996).
10 Franks, F., "Freeze-drying: from empiricism to predictability", Cryoletters, 11 (2), 93-110 (1990).
11 Pikal, M.J., "Freeze drying", In Encyclopedia of Pharmaceutical Technology, Marcel Dekker, New York, 1299-1326 (2002).
12 Pikal, M.J., Shah, S., "The collapse temperature in freeze drying: dependence on measurement methodology and rate of water removal from the glassy phase", International Journal of Pharmaceutics, 62 (2/3), 165-186 (1990).
13 Hartel, R.W., "Ice crystallization during the manufacture of ice cream", Trends in Food Science and Technology, 7 (10), 315-321 (1996).
14 Russel, A.B., Cheney, P.E., Wantling, S.D., "Influence of the freezing conditions on ice crystallization in ice cream", Journal of Food Engineering, 39, 179-191 (1999).
15 Millman, M.J., Liapis, A.I., Marchello, J.M., "An analysis of the lyophilization process using a sorption-sublimatin model and various operational policies", AIChE J., 31 (10), 1594-1604 (1985).
16 Petropoulos, J.H., Petrou, J.K., Liapis, A.I., "Network model investigation of gas-transport in bidisperse porous adsorbents", Ind. Eng. Chem. Res., 30 (6), 1281-1289 (1991).
17 Pikal, M.J., Shah, S., Senior, D., Lang, J.E., "Physical chemistry of freeze-drying: measurement of sublimation rates for frozen aqueous solutions by a microbalance technique", Journal of Pharmaceutical Sciences, 72 (6), 635-650 (1983).
18 Willemer, H., "Measurements of temperatures, ice evaporation rates and residual moisture contents in freeze-drying", Developments in Biological Standardization, 74, 123-134 (1992).
19 Searles, J.A., Carpenter, J.F., Randolph, T.W., "Annealing to optimize the primary drying rate, reduce freezing-induced drying rate heterogeneity, and determine T_g' pharmaceutical lyophilization", Journal of Pharmaceutical Sciences, 90 (7), 872-887 (2001).
20 Suzuki, Y., Sumi, Y., Mizuta, T., "Studies on development of manufacturing processes for pharmaceutical freeze-dried products", In: Freeze-drying/Lyophilization of Pharmaceutical and Biological Products, Rey, L., May, J.C., eds., Marcel Dekker, New York, 433-463 (1999).
21 Hellawell, A., "Local convective flows in partly solidified alloys", In: Structure and Dynamics of Partially Solidified Systems, Loper, D.E., eds., Martinus Nijhoff Publishers, Boston, 5-23 (1986).
22 Shackelford, J.F., Introduction to Materials Science for Engineers, 3rd edition, Prentice-Hall International, London, 404 (1992).
23 Craig, D.Q.M., Royall, P.G., Kett, V.L., Hopton, M.L., "The relevance of the amorphous state to pharmaceutical dosage forms: Glassy drugs and freeze dried systems", International Journal of Pharmaceutics, 179 (2), 179-207 (1999).
24 Snowman, J.W., "Formulation and cycle development for lyophilization: first steps", Pharmaceutical Engineering, 13, 26-34 (1993).
25 Hsu, C.C., Walsh, A.J., Nguyen, H.M., Overcashier, D.E., Koning-Bastiaan, H., Bailey, R.C., Nail, S.L., "Design and application of a low-temperature Peltier-cooling microscope stage", Journal of Pharmaceutical Sciences, 85 (1), 70-74 (1996).
26 Tang, X., Pikal, M.J., "Design of freeze-drying processes for pharmaceuticals: practical advice", Pharmaceutical Research, 21 (2), 191-200 (2004).
27 Kim, A.I., Akers, M.J., Nail, S.L., "The physical state of mannitol after freeze-drying: effects of mannitol concentration, freezing rate, and a noncrystallizing cosolute", Journal of Pharmaceutical Sciences, 87 (8), 931-935 (1998).
28 Wang, W., "Lyophilization and development of solid protein pharmaceuticals", International Journal of Pharmaceutics, 203 (1/2), 1-60 (2000).
29 Hatley, R.H.M., Franks, F., "Application of DSC in the development of improved freeze-drying process for labile biologicals", Journal of Thermal Analysis, 37 (8), 1905-1914 (1991).
30 Hatley, R.H.M., Blair, J.A., "Stabilisation and delivery of labile materials by amorphous carbohydrates and their derivatives", Journal of Molecular Catalysis-B Enzymatic, 7 (1-4), 11-19 (1999).
31 Livesey, R.G., Rowe, T.W.G., "A discussion of the effect of chamber pressure on heat and mass transfer in freeze-drying", Journal of Parenteral Science and Technology, 41 (5), 169-171 (1987).
32 Wolff, E., Gibert, H., Rodolphe, F., "Vacuum freeze-drying kinetics and modeling of a liquid in a vial", Chem. Eng. Process., 25 (3), 153-158 (1989).
33 Wang, W., Chen, G.H., "Numerical investigation on dielectric material assisted microwave freeze-drying of aqueous mannitol solution", Drying Technology, 21 (6), 995-1017 (2003).
34 Chen, G.H., Wang, W., Mujumdar, A.S., "Theoretical study of microwave heating patterns on batch fluidized bed drying of porous material", Chem. Eng. Sci., 56 (24), 6823-6835 (2001).
35 Wang, W., Chen, G.H., "Heat and mass transfer in dielectric-material-assisted microwave freeze-drying of skim milk with hygroscopic effect", Chem. Eng. Sci., 60 (23), 6542-6550 (2005).
36 Fakes, M.G., Dali, M.V., Haby, T.A., Morris, K.R., Varia, S.A., Serajuddin, A.T.M., "Moisture sorption behavior of selected bulking used in lyophilized products", PDA Journal of Pharmaceutical Science and Technology, 54 (2), 144-149 (2000).
37 Oetjen, G.W., Haseley, P., Freeze Drying, 2nd edition, Wiley-VCH, Weinheim, 345-355 (2004).
38 Dolan, J.P., Scott, E.P., "Microwave freeze-drying of aqueous solutions", In: Advances in Heat and Mass Transfer in Biological Systems ASME, HTD-Vol. 288, Hayea, L.J., Roemer, R.B., eds., United Engineering, New York, 91-98 (1994).
39 Sadikoglu, H., Ozdemir, M., Seker, M., "Freeze-drying of pharmaceutical products: research and development needs", Drying Technology, 24 (7), 849-861 (2006).
40 Aurelie, H., Julien, A., Severine, V., "Sublimation kinetics during freeze-drying of pharmaceutical protein formulation", Drying Technology, 25 (4-6), 753-758 (2007).
41 Schersch, K., Betz, O., Garidel, P., "Systematic investigation of the effect of lyophilizate collapse on pharmaceutically relevant proteins I: Stability after freeze-drying", Journal of Pharmaceutical Sciences, 99 (5), 2256-2278 (2010).
42 Kasper, J.C., Friess, W., "The freezing step in lyophilization: Physico-chemical fundamentals, freezing methods and consequences on process performance and quality attributes of biopharmaceuticals", European Journal of Pharmaceutics and Biopharmaceutics, 78, 248-263 (2011).
43 Zhang, M., Jiang, H., Lim, R.X., "Recent developments in microwave-assisted drying of vegetables, fruits, and aquatic products: drying kinetics and quality considerations", Drying Technology, 28 (11), 1307-1316 (2010).
44 Woo, M.W., Mujumdar, A.S., "Effects of electric and magnetic field on freezing and possible relevance in freeze drying", Drying Technology, 28 (4), 433-443 (2010).
45 Chen, G.H., Wang, W., "Role of freeze drying in nanotechnology", Drying Technology, 25 (1-3), 29-35 (2007).
46 Qian, L., Zhang, H.F., "Controlled freezing and freeze drying: a versatile route for porous and icro-/nano-structured materials", Journal of Chemical Technology & Biotechnology, 86, 172-184 (2011).
47 Patil, V.V., Dandekar, P.P., Patravale, V.B., "Freeze drying: potential for powdered nanoparticulate product", Drying Technology, 28 (5), 624-635 (2010).
48 Shi, W.Z., Liu, J., Cheng H.X., "Preparation of silver nanopowder by freeze-drying procedure", Drying Technology, 27 (4), 529-533 (2009).
49 Yang, H.M., Nie, S., "Preparation and characterization of Co-doped ZnO nanomaterials", Materials Chemistry and Physics, 114 (1), 279-282 (2009).
50 Xi, X.L., Xu, X.Y., Nie, Z.R., He, S., Wang, W., Yi, J., Zuo, T.Y., "Preparation of W-Cu nano-composite powder using a freeze-drying technique", International Journal of Refractory Metals and Hard Materials, 28 (2), 301-304 (2010).
51 Wang, W., Chen, G.H., Gao, F.R., "Effect of dielectric material on microwave freeze drying of skim milk", Drying Technology, 23 (1/2), 317-340 (2005).
52 Wang, W., Chen, G.H., "Theoretical study on microwave freeze-drying of an aqueous pharmaceutical excipient with the aid of dielectric material", Drying Technology, 23 (9-11), 2147-2168 (2005).
53 Wang, W., Chen, G.H., "Freeze drying with dielectric-material-assisted microwave heating", AIChE J., 53 (12), 3077-3088 (2007).
54 Wang, W., Chen, G.H., "Numerical investigation on freeze-drying of initially porous frozen material from aqueous solution", In: Proceedings of the 16th International Drying Symposium, Hyderabad, India, 508-513 (2008).
55 Wang, W., Chen, G.H., Mujumdar, A.S., "Physical interpretation of solids drying: An overview on mathematical modeling research", Drying Technology, 25, 659-668 (2007).
56 Wang, W., Ma, H.X., Chen, G.H., "A model for drying of porous materials: from generality to specific applications", Drying Technology, 29 (13), 1542-1555 (2011).

[1]	Yutong Jiang, Yifeng Chen, Fuliu Yang, Jixue Fan, Jun Li, Zhuhong Yang, Xiaoyan Ji. Efficient SO₂ removal using aqueous ionic liquid at low partial pressure[J]. 中国化学工程学报, 2023, 58(6): 355-363.
[2]	Baodong Zhao, Yinglei Wang, Fulei Gao, Yajing Liu, Weixiao Liu, Feng Ding. Understanding the alkyl effect of geminal dinitropropyl ester energetic plasticizers on hydroxyl terminated polybutadiene (HTPB): Simultaneous tuning on low temperature behavior and processability[J]. 中国化学工程学报, 2023, 54(2): 364-371.
[3]	Jun Li, Liqiang Zhang, Xiao Zhu, Mengze Zhang, Tai Feng, Xiqiang Zhao, Tao Wang, Zhanlong Song, Chunyuan Ma. Systematic investigation of SO₂ adsorption and desorption by porous powdered activated coke: Interaction between adsorption temperature and desorption energy consumption[J]. 中国化学工程学报, 2022, 48(8): 140-148.
[4]	Tao Sun, Mingjun Pang, Yang Fei. Numerical study on hydrodynamic characteristics of spherical bubble contaminated by surfactants under higher Reynolds numbers[J]. 中国化学工程学报, 2022, 45(5): 268-283.
[5]	Xiaocui Sun, Xue Liu, Guang-Rong Zhao. Separation of salidroside from the fermentation broth of engineered Escherichia coli using macroporous adsorbent resins[J]. 中国化学工程学报, 2022, 44(4): 260-267.
[6]	Islem Chaari, Atef Touil, Mounir Medhioub. Adsorption-desorption of phenolic compounds from olive mills wastewater using Tunisian natural clay[J]. 中国化学工程学报, 2021, 40(12): 287-292.
[7]	Tomohito Kameda, Hiroki Uchida, Shogo Kumagai, Yuko Saito, Keiichi Mizushina, Ichirou Itou, Tianye Han, Toshiaki Yoshioka. Desorption of Cl^- from Mg-Al layered double hydroxide intercalated with Cl^- using CO₂ gas and water[J]. 中国化学工程学报, 2021, 29(1): 131-134.
[8]	Jiale Zheng, Wenli Song, Lin Du, Lina Wang, Songgeng Li. Desorption of VOC from polymer adsorbent in multistage fluidized bed[J]. 中国化学工程学报, 2020, 28(6): 1709-1716.
[9]	Peng Tan, Yao Jiang, Xiaoqin Liu, Linbing Sun. Magnetically responsive porous materials for efficient adsorption and desorption processes[J]. 中国化学工程学报, 2019, 27(6): 1324-1338.
[10]	Bing Zhou, Bin Sun, Wenjuan Qiu, Ying Zhou, Junqian He, Xiao'ai Lu, Hanfeng Lu. Adsorption/desorption of toluene on a hypercrosslinked polymeric resin in a highly humid gas stream[J]. 中国化学工程学报, 2019, 27(4): 863-868.
[11]	Tibor Poós, Viktor Szabó. Desorption isotherms and isosteric heat of anaerobic fermentation residues[J]. 中国化学工程学报, 2019, 27(10): 2510-2517.
[12]	Yingying Gu, Albert T. Yeung, Hongjiang Li. Enhanced electrokinetic remediation of cadmium-contaminated natural clay using organophosphonates in comparison with EDTA[J]. Chinese Journal of Chemical Engineering, 2018, 26(5): 1152-1159.
[13]	Shuying Chen, Rui Tu, Jun Li, Xiaohua Lu. Pd catalysts supported on rGO-TiO₂ composites for direct synthesis of H₂O₂: Modification of Pd²⁺/Pd⁰ ratio and hydrophilic property[J]. Chinese Journal of Chemical Engineering, 2018, 26(3): 534-539.
[14]	Nurul Azrin Zubbri, Abdul Rahman Mohamed, Maedeh Mohammadi. Parametric study and effect of calcination and carbonation conditions on the CO₂ capture performance of lithium orthosilicate sorbent[J]. Chinese Journal of Chemical Engineering, 2018, 26(3): 631-641.
[15]	Colin A. Scholes, Shufeng Shen. Mass transfer correlations for membrane gas-solvent contactors undergoing carbon dioxide desorption[J]. Chinese Journal of Chemical Engineering, 2018, 26(11): 2337-2343.